有限宽度和椭圆孔形状对缺口层合板强度预测的影响

本文采用有限元方法对正交各向异性材料含有不同椭圆孔形状的有限宽度板作了分析,给出了有限宽度和椭圆孔形状对应力集中因子K₁和孔边应力分布σ_y(x,0)的影响公式。数值结果表明:正交各向异性板的有限宽度和椭圆孔形状对K_r和σ_y(x,0)的影响均与各向同性材料不同,所以有限宽度和椭圆孔形状将对缺口层合板强度的预测产生影响。      

复合材料加筋板的动力分析

本文构造了九自由度三角形拟协调罚函数复合材料板单元与六自由度复合材料梁单元,考虑了剪切变形与转动惯量的影响。用这两种单元对复合材料加筋板的自由振动、阻尼特性和瞬态响应问题进行了研究,给出一些有益结果。      

让七十多年前的影片《迷途的羔羊》重返银幕

中国电影资料馆珍藏着大量早期影片,其中许多具有珍贵的保存价值.1936年由蔡楚生编导、任光谱曲的<迷途的羔羊>是我国第一部以流浪儿童为题材的影片,也是我国儿童影片中的第一部有声片.此片在思想和艺术上都取得了突破,尤其是以童谣形式演唱的主题歌<月光光歌>感人至深,充分发挥了音乐的魅力,增强了整部影片的感染力.影片公映后,深受广大观众的欢迎和电影工作者的赞扬.七十多年过去了,当我们准备再次让它同观众见面时,却发现能够最真实、最原始记录影音效果的原底、声底片却出现了许多问题,给复制工作带来了空前的难度,这是我们从事资料影片复制工作三十多年来从未遇到过的难题.主要有以下几方面问题:     

冷轧薄宽带钢局部型中浪瓢曲变形行为研究

针对薄宽带钢冷轧过程中易发多发的局部型中浪瓢曲缺陷,引入非均匀载荷宽度、弹性约束系数及平均张应力建立了屈曲变形的解析计算模型。应用能量最低原理对屈曲变形区域进行搜索求解,得到了局部型中浪屈曲临界条件(包括临界应力、屈曲波长和屈曲波宽),获得了其与非均匀载荷宽度、弹性约束系数、平均张应力的关系,并发现平均张应力是产生局部型中浪的重要影响因素。应用样条有限元方法对局部型中浪进行数值仿真分析,验证了屈曲解析计算方法的正确性。在实验轧机上进行了轧制研究,通过轧制获得了局部型中浪屈曲模态,对实验结果分析得到了相对应的屈曲临界条件,与解析法和样条有限元法结果基本吻合,证明了样条有限元计算方法与解析计算方法的正确性及其工程应用价值。     

热力公司锅炉附属仪表使用及检定情况

目前在新疆的供热公司大多存在着麻痹思想,对锅炉的附属仪表均不够重视,因此导致的安全隐患几乎都没有意识到.     

世界著名帐篷露营地

<正>住在帐篷露营地被认为是最经济实惠的旅行住宿方式,特别是在欧美国家,帐篷营地的费用通常比附近价格最为低廉的旅店还要便宜。如今,帐篷营地已经成为一项产业并且发展得非常成熟,大多数都配有能够满足生活需要的基础设施,比如厕所、淋浴间、洗衣房等,很多还配有丰富的活动场所和设备。除此之外,     

地震吓不倒档案人

2008年5月12日下午,一场史无前例的特大地震突袭四川,造成了巨大的生命财产损失.东方电气集团东方电机有限公司位于德阳市旌阳区,离震中的直线距离不到80公里,地震烈度达到7度,许多房屋损坏,属于重灾区.灾害发生后,由于组织及时,措施得力,档案部门全体职工在几分钟内有序地撤离到安全地带,无一伤亡.     

加拿大国家档案馆珍藏概览(5)——镜头中的加拿大

1989年是照片诞生后的第150周年.自从第一次将光影与化学结合起来用于从大自然中获得永恒的图片后,自然风光摄影就倍受争议.不管怎样,无论艺术还是科学,技艺还是职业,摄影都是产生于客观性与选择性之间,创造性与现实性之上的一种档案媒介.在最新的一次统计后,国家档案馆现今保存有1500万以上的照片档案.不管是百年前拍摄的还是上个星期刚刚拍摄的,照片所要传递出的要素通常是些非常独特的信息.无论照片、底片和幻灯片,是黑白的还是彩色的,无论旧与新,不管是退色了的还是色彩艳丽的,单独的还是成集合的,最为关键的是它们都见证了加拿大历史与社会的发展与兴衰.     

DCI为什么要求数字影院放映系统的分辨率为4K或2K

上世纪90年代初,美国电影电视工程师学会"数字影像层级结构"特别工作小组对成像系统的空间分辨率要求进行了研究.该小组从分辨率的角度将显示器分为低分辨率、常规分辨率、高分辨率和超高分辨率等四个层级.该小组基于以下几个基本概念,提出了空间分辨率层级的设计理念:--基于常用的数字处理和存储体系结构的一种层级整数递进;--支持基于影像贴片(image tile)的各种宽高比和空间分辨率;--能够利用适宜分辨率的贴片,针对任何应用要求来构建显示器.通过使用贴片和仅仅四个分辨率层级,便有可能构建出适用于任何用途的新显示器,而且这种显示器还可以用于显示来自任何其它层级的影像.美国数字电影倡导组织(DCI)要求数字影院放映系统的分辨率为4K或2K,属超高分辨率或高分辨率的级别.     

Mixed-dimensional van der Waals heterojunction-enhanced Raman scattering

Van der Waals heterojunctions(vdWHs)provide an excellent material system for the research of heterojunction-enhanced Raman scattering(HERS)due to their complexity and diversity.However,the traditional two-dimensional vdWHs are not conducive to the full utilization of near-field light due to the limitation of single dimension.Herein,we fabricate T-shaped mixed-dimensional SnSe₂/ReS₂ vdWHs via chemical vapor deposition and wetting transfer method,and demonstrate that the mixed-dimensional vdWHs can be used as ultrasensitive HERS chips based on the effective photo-induced charge transfer.Besides,the radiative energy transfer effect enhanced by near-field light further magnifies the HERS signals,improving the detection limit of rhodamine 6G(R6G)to femtomolar level.Furthermore,we demonstrate that the ultrasensitive screening of crystal violet in multicomponent solutions adsorbed on SnSe₂/ReS₂ vdWHs can be achieved by adjusting the laser wavelength,which has not been achieved by noble metal materials.This work provides new insights into the mixed-dimensional vdWHs and demonstrates the great application potential of T-shaped heterojunctions.     

GaN材料中离子注入的研究进展

综述了ＧａＮ材料中离子注入的研究进展,重点介绍了离子注入技术在ＧａＮ材料中的发光（ＰＬ,ＥＬ,ＣＬ）研究,注入隔离ｐ－ｇａｊｆ／ｎ－型掺杂和深能级缺陷研究中的应用。     

论工业设计的核心价值

围绕设计在不同历史阶段的价值体现展开论述,分析设计在"环境保护、生活美好、社会发展"这一永恒主题中的重要作用,与此同时,应该认识到部分设计已对社会产生负面影响,在此基础上总结出功利性因素对设计价值的影响,基于设计价值在现代商业社会中受到扭曲的基础上,呼吁设计核心价值观的理性回归。     

海啸作用下漂浮物行为及对陆上建筑作用力研究

根据实际物理实验,采用ALE（任意拉格朗日欧拉）有限元方法在三维数值波浪水池中模拟了海啸的产生、海啸波的传播,与漂浮物作用以及漂浮物与陆上建筑的撞击。通过将海啸上岸后的波高、与漂浮物的作用力以及漂浮物的速度等数值计算结果与物理实验结果进行对比,验证了ALE流固耦合有限元方法在研究海啸作用下漂浮物行为方面的可行性。在此基础上进一步分析漂浮物在海啸作用下对陆上建筑的作用力。通过计算发现,漂浮物的质量、撞击速度对作用力起决定性作用,而被撞建筑的刚度对作用力的影响并不大。     

Effects of road lighting: An analysis based on Dutch accident statistics 1987-2006

This study estimates the safety effect of road lighting on accidents in darkness on Dutch roads, using data from an interactive database containing 763,000 injury accidents and 3.3 million property damage accidents covering the period 1987-2006. Two estimators of effect are used, and the results are combined by applying techniques of meta-analysis. Injury accidents are reduced by 50%. This effect is larger than the effects found in most of the earlier studies. The effect on fatal accidents is slightly larger than the effect on injury accidents. The effect during twilight is about 2/3 of the effect in darkness. The effect of road lighting is significantly smaller during adverse weather and road surface conditions than during fine conditions. The effects on pedestrian, bicycle and moped accidents are significantly larger than the effects on automobile and motorcycle accidents. The risk of injury accidents was found to increase in darkness. The average increase in risk was estimated to 17% on lit rural roads and 145% on unlit rural roads. The average increase in risk during rainy conditions is about 50% on lit rural roads and about 190% on unlit rural roads. The average increase in risk with respect to pedestrian accidents is about 140% on lit rural roads and about 360% on unlit rural roads.     

实验室认可中的国际互认

详细论述了实验室互认协议的概念、作用及现状。     

微结构特征对微结构零件注射成型流场均匀性的影响

在Navier-Stokes方程基础上,配合适当边界条件,借助计算流体力学软件CFD-ACE实现了单侧分布矩形微结构、梯形微结构和双侧分布矩形微结构零件模型的流场仿真,得到了三种零件的速度场和剪切速率场.结果表明,单侧矩形微结构零件各微结构截面的速度和剪切速率都有较大差异;单侧梯形微结构零件各微结构截面的剪切速率分布一致,速度分布不一致;双侧矩形微结构零件三个微结构截面的速度和剪切速率都一致.单侧分布梯形微结构零件流场均匀性好于单侧分布矩形微结构零件流场均匀性,双侧分布的微结构零件流场均匀性好于单侧布置的微结构零件流场均匀性.     

Hydrophilicity of Graphene in Water through Transparency to Polar and Dispersive Interactions

Establishing contact angles on graphene‐on‐water has been a long‐standing challenge as droplet deposition causes free‐floating graphene to rupture. The current work presents ice and hydrogels as substrates mimicking water while offering a stable support for graphene. The lowest water contact angles on graphene ever measured, namely on graphene‐on‐ice and graphene‐on‐hydrogel, are recorded. The contact angle measurements of liquids with a range of polarities allow the transparency of graphene toward polar and dispersive interactions to be quantified demonstrating that graphene in water is hydrophilic. These findings are anticipated to shed light on the inconsistencies reported so far on the wetting properties of graphene, and most particularly on their implications toward rationalizing how molecules interact with graphene in water.     

钛合金表面耐磨润滑微弧氧化膜的研究进展

综述了钛合金微弧氧化膜的摩擦学性能研究以及提高膜层耐磨性能和润滑性能所采用的方法,旨在对改善钛合金微弧氧化膜摩擦学性能的研究现状有一个系统全面的认识,并在此基础上展望了未来钛合金微弧氧化膜摩擦学研究的发展趋势和方向。     

Nanofibrous membrane-based absorption refrigeration system

This paper presents a study on the efficacy of highly porous nanofibrous membranes for application in membrane-based absorbers and desorbers. Permeability studies showed that membranes with a pore size greater than about one micron have a sufficient permeability for application in the absorber heat exchanger. Membranes with smaller pores were found to be adequate for the desorber heat exchanger. The membranes were implemented in experimental membrane-based absorber and desorber modules and successfully tested. Parametric studies were conducted on both absorber and desorber processes. Studies on the absorption process were focused on the effects of water vapor pressure, cooling water temperature, and the solution velocity on the absorption rate. Desorption studies were conducted on the effects of wall temperature, vapor and solution pressures, and the solution velocity on the desorption rate. Significantly higher absorption and desorption rates than in the falling film absorbers and desorbers were achieved.     

Analysis of plastic deformation in diamond like carbon films-steel substrate system with tribological tests

The influence of plastic deformation of the substrate on the tribological properties of diamond like carbon (DLC) films was investigated in DLC films-steel substrate system. The tribological properties of DLC films deposited on different hardness steel were evaluated by a ball on disk rotating-type friction tester at room temperature under different environments. In dry nitrogen, DLC films on soft steel exhibited excellent tribological properties, especially obvious under high load (such as 20 N and 50 N). However, DLC films on hard steel were worn out quickly at load of 20 N. Plastic deformation was observed on soft steel after tribological tests. The width and depth of plastic deformation track increased with increase of the experimental load. Super low friction and no measurable wear were kept in good condition even large plastic deformation under high load conditions in DLC films-soft steel system. In open air, DLC films on soft steel exhibited high coefficient of friction and DLC films on ball were worn out quickly. Plastic deformation was not observed on soft steel because the contact area increased and the thick hardened layer on contact surface were formed by DLC films and debris particles together on the steel substrate. The wear track on steel became deep and wide with increase of loads and DLC films were worn out. The experimental results showed that super low friction and high wear resistance of DLC films on soft steel can be attributed to the good adhesion and plastic deformation. Plastic deformation played an active role in the tribological properties of DLC films on soft steel in the present work.