共查询到20条相似文献,搜索用时 23 毫秒
1.
本文研究了乙酸纤维滤膜、混合纤维滤膜和玻璃纤维滤膜对浮游植物叶绿素a测定结果的影响,比较了丙酮浸提法、丙酮研磨法、乙醇法和热乙醇法四种方法的稳定性和可替代性。研究表明,三种滤膜对丙酮浸提法和研磨法的测定结果无显著影响,可选择任一种滤膜。丙酮浸提法和研磨法测定结果无显著差异,可相互替换,丙酮研磨法平均损耗率为32.91%,误差较大。乙醇法和热乙醇法可相互替换,但热乙醇法的平行性较差,加热过程难控制。丙酮法测定结果普遍偏高,其中丙酮浸提法的结果明显高于乙醇法,鉴于数据的可比性和简便操作,可采用丙酮浸提法,而乙醇法值得在日后水质监测中推广。 相似文献
2.
物相定量分析在铝工业中的应用 总被引:1,自引:0,他引:1
总结介绍了到目前为止在铝工业中应用的物相定量分析方法,分析了各种方法的应用范围以及优缺点,包括化学物相定量法、外标法、化学物相计算法、X射线衍射增量法、K值法、绝热法、Rietveld全谱拟合定量法、K值法和化学物相计算法结合以及Zevin无标定量法等.结果表明:每种物相定量分析方法都有各自的优点和缺点,需要根据样品的... 相似文献
3.
加权残数法与有限元结合是一种有实用价值的方法。本文介绍了最小二乘法一有限元耦合方法的三种类型:直接法、对称法、迭代法。对称法适用于大型程序,而迭代法适用于微机。 相似文献
4.
This paper concerns with a combination method of the boundary element method and the finite element method for elastic-plastic
analyses. The combination method proposed here is based on the substructure method using the conjugate gradient method. This
combination method has the advantage of saving CPU time and memory storage size over the finite element method. The combination
method is applied to a J-integral analysis of a crack in an adhesive joint. The effect of bond thickness on the J-integral
is discussed. 相似文献
5.
6.
冻干工艺中升华结束点和残余水分测量方法简述 总被引:9,自引:0,他引:9
升华结束点和残余水分的在线测定是冷冻干燥科学实验及其工艺中的重点和难点 ,着重对其常用确定方法理论模型法、产品温度响应法、压力升高法、湿度传感器法、残余气体分析仪、脉冲核磁共振法 (NMR)、称重法 (重量传感器法 )等 7种方法加以总结和概括。指出脉冲核磁共振法和湿度传感器法将为冻干理论研究和实验研究拓展新思路 相似文献
7.
8.
纳米Fe3O4磁性颗粒的制备进展 总被引:1,自引:0,他引:1
概述了纳米Fe3O4磁性颗粒的制备工艺:机械球磨法、微乳液法、水热法、微乳-水热法、溶胶-凝胶法、沉淀法(共沉淀法、氧化沉淀法、超声沉淀法)、水解法等,归纳了各种制备方法的特点,并对其前景进行了简要评述. 相似文献
9.
从新的角度对传统Rackwitz-Fiessler随机空间变换方法(R-F法)进行了多方位的阐释。首先,给出传统R-F法的描述并从几何角度分析R-F法与等概率变换的关系;然后,证明R-F法的正变换过程符合等概率变换而逆变换过程却不符合,但却可看作等概率变换的一次近似;其次,提出一种等价的R-F条件,为清晰的阐释R-F法中变量相关性的变化情况提供新思路;之后,指出R-F法的变量相关性变化情况同Nataf-Pearson方法(N-P法)一致;最后,比较考虑相关性变化的R-F法和N-P法的计算量,指出两者在单个迭代步中计算量基本一致且可通过算法优化实现;另外对R-F法与线性N-P法的也作了比较。算例表明:正确考虑相关性变化的R-F法可以得到同N-P法一致的结果。 相似文献
10.
11.
实验室常用静力称重法对微量液体容量进行检测,该方法在1μL容量的精确度达到2.18%,重复性为1.85%,但该方法无法在实验室外进行。现有的光学测量微量液体容量法的在1μL的精度为6.09%,重复性为1.31%。该法可实现在线检测,但其精度不如静力称重法。对光学测量微量液体容量的方法进行研究分析,提出了一种新的标定容量参照标准的方法,该标定方法将静力称重法与光学测量法两者结合,以静力称重法容量测量结果为参照标准,代替光学法原先的标准液。新的标定方法在原理上将参照标准由点扩展到线,可将光学测量法在10μL点的精度提高到2.014%,重复性1.30%。 相似文献
12.
13.
A boundary density evolutionary topology optimization of continuum structures with smooth boundaries
Xueping Li Chuhao Qin Peng Wei Cheng Su 《International journal for numerical methods in engineering》2022,123(1):158-179
Based on the variable density method, this article proposes a boundary density evolutionary topology optimization method. The method uses a material interpolation model without penalization. Combined with the density grading filtering method, an optimal topology with only 0/1 cells can be obtained. Compared with the solid isotropic microstructures with penalization method (SIMP), no penalty factor is required in the material interpolation model; compared with the evolutionary structural optimization method (ESO), intermediate-density elements are allowed in the optimization process, but the concept of gradually removing the low-utilization materials near the boundary in the ESO method is retained. After the optimal result is obtained, the structural boundary element is processed by the level set of nodal strain energy, and the optimization result with smooth boundaries similar to the level set method (LSM) can be obtained. The proposed method has the superiority of the variable density method, and it also combines the advantages of the evolutionary method and the level set method, so which is named as boundary density evolution (BDE) method. The four static and one dynamic optimization examples illustrate the stability and efficiency of the proposed method. 相似文献
14.
超细NiO粉体的制备及其应用研究进展 总被引:2,自引:0,他引:2
综述了超细NiO粉体近年来的制备方法及其特点(主要有固相反应法、沉淀法、微乳液法、喷雾热解法、热分解法和电化学法),介绍了超细NiO粉体的应用现状. 相似文献
15.
16.
本文采用碘显色法、双酶水解-高效液相色谱法和酸水解法对13种肉松样、自制肉松样和加标样进行淀粉含量测定,分析结果,并进一步对肉松制品淀粉含量测定中多糖、抗性糊精等可能干扰物质进行研究。结果表明:采用双酶水解-高效液相色谱法和淀粉显色相结合,可以有效地排除多糖类物质的干扰,避免测定假阳性,从而真实准确地反应肉制品中淀粉含量。 相似文献
17.
结构动力分析中几种逐步积分法在负刚度条件下的收敛性和稳定性 总被引:2,自引:0,他引:2
本文研究了负刚度条件下中心差分法、Z-变换法、Wilson θ法以及二步Adams显式方法的收敛性及稳定性。在负刚度条件下,这几种方法都是收敛的,中心差分法、Z-变换法及二步Adams显式方法是无条件稳定的,而Wilson θ法则是条件稳定的。 相似文献
18.
本文介绍一种有别于模态分析法的直接积分法。介绍了多自由度线性系统运动微分方程化为状态方程的方法.介绍了状态方程的解法以及其离散化后的迭代法,给出了计算框图。 相似文献
19.
The interpolating element-free Galerkin (IEFG) method for two-dimensional potential problems 总被引:1,自引:0,他引:1
Hongping RenYumin Cheng 《Engineering Analysis with Boundary Elements》2012,36(5):873-880
In this paper, the moving least-squares (MLS) approximation and the interpolating moving least-squares (IMLS) method proposed by Lancaster are discussed first. A new method for deriving the MLS approximation is presented, and the IMLS method is improved. Compared with the IMLS method proposed by Lancaster, the shape function of the improved IMLS method in this paper is simpler so that the new method has higher computing efficiency. Then combining the shape function of the improved IMLS method with Galerkin weak form of the potential problem, the interpolating element-free Galerkin (IEFG) method for the two- dimensional potential problem is presented, and the corresponding formulae are obtained. Compared with the conventional element-free Galerkin (EFG) method, the boundary conditions can be applied directly in the IEFG method, which makes the computing efficiency higher. For the purposes of demonstration, some selected numerical examples are solved using the IEFG method. 相似文献