Boosting the Heat Dissipation Performance of Graphene/Polyimide Flexible Carbon Film via Enhanced Through‐Plane Conductivity of 3D Hybridized Structure

The development of materials with efficient heat dissipation capability has become essential for next‐generation integrated electronics and flexible smart devices. Here, a 3D hybridized carbon film with graphene nanowrinkles and microhinge structures by a simple solution dip‐coating technique using graphene oxide (GO) on polyimide (PI) skeletons, followed by high‐temperature annealing, is constructed. Such a design provides this graphitized GO/PI (g‐GO/PI) film with superflexibility and ultrahigh thermal conductivity in the through‐plane (150 ± 7 W m^‐1 K^‐1) and in‐plane (1428 ± 64 W m^‐1 K^‐1) directions. Its superior thermal management capability compared with aluminum foil is also revealed by proving its benefit as a thermal interface material. More importantly, by coupling the hypermetallic thermal conductivity in two directions, a novel type of carbon film origami heat sink is proposed and demonstrated, outperforming copper foil in terms of heat extraction and heat transfer for high‐power devices. The hypermetallic heat dissipation performance of g‐GO/PI carbon film not only shows its promising application as an emerging thermal management material, but also provides a facile and feasible route for the design of next‐generation heat dissipation components for high‐power flexible smart devices.     

Stretchable All‐Gel‐State Fiber‐Shaped Supercapacitors Enabled by Macromolecularly Interconnected 3D Graphene/Nanostructured Conductive Polymer Hydrogels

Nanostructured conductive polymer hydrogels (CPHs) have been extensively applied in energy storage owing to their advantageous features, such as excellent electrochemical activity and relatively high electrical conductivity, yet the fabrication of self‐standing and flexible electrode‐based CPHs is still hampered by their limited mechanical properties. Herein, macromolecularly interconnected 3D graphene/nanostructured CPH is synthesized via self‐assembly of CPHs and graphene oxide macrostructures. The 3D hybrid hydrogel shows uniform interconnectivity and enhanced mechanical properties due to the strong macromolecular interaction between the CPHs and graphene, thus greatly reducing aggregation in the fiber‐shaping process. A proof‐of‐concept all‐gel‐state fibrous supercapacitor based on the 3D polyaniline/graphene hydrogel is fabricated to demonstrate the outstanding flexibility and mouldability, as well as superior electrochemical properties enabled by this 3D hybrid hydrogel design. The proposed device can achieve a large strain (up to ≈40%), and deliver a remarkable volumetric energy density of 8.80 mWh cm^?3 (at power density of 30.77 mW cm^?3), outperforming many fiber‐shaped supercapacitors reported previously. The all‐hydrogel design opens up opportunities in the fabrication of next‐generation wearable and portable electronics.     

Human‐Finger Electronics Based on Opposing Humidity‐Resistance Responses in Carbon Nanofilms

Carbon nanomaterials have excellent humidity sensing properties. Here, it is demonstrated that multiwalled carbon‐nanotube (MWCNT)‐ and reduced‐graphene‐oxide (rGO)‐based conductive films have opposite humidity/electrical resistance responses: MWCNTs increase their electrical resistance (positive response) and rGOs decrease their electrical resistance (negative response). The authors propose a new phenomenology that describes a “net”‐like model for MWCNT films and a “scale”‐like model for rGO films to explain these behaviors based on contributions from junction resistances (at interparticle junctions) and intrinsic resistances (of the particles). This phenomenology is accordingly validated via a series of experiments, which complement more classical models based on proton conductivity. To explore the practical applications of the converse humidity/resistance responses, a humidity‐insensitive MWCNT/rGO hybrid conductive films is developed, which has the potential to greatly improve the stability of carbon‐based electrical device to humidity. The authors further investigate the application of such films to human‐finger electronics by fabricating transparent flexible devices consisting of a polyethylene terephthalate substrate equipped with an MWCNT/rGO pattern for gesture recognition, and MWCNT/rGO/MWCNT or rGO/MWCNT/rGO patterns for 3D noncontact sensing, which will be complementary to existing 3D touch technology.     

EGaIn‐Assisted Room‐Temperature Sintering of Silver Nanoparticles for Stretchable,Inkjet‐Printed,Thin‐Film Electronics

Coating inkjet‐printed traces of silver nanoparticle (AgNP) ink with a thin layer of eutectic gallium indium (EGaIn) increases the electrical conductivity by six‐orders of magnitude and significantly improves tolerance to tensile strain. This enhancement is achieved through a room‐temperature “sintering” process in which the liquid‐phase EGaIn alloy binds the AgNP particles (≈100 nm diameter) to form a continuous conductive trace. Ultrathin and hydrographically transferrable electronics are produced by printing traces with a composition of AgNP‐Ga‐In on a 5 µm‐thick temporary tattoo paper. The printed circuit is flexible enough to remain functional when deformed and can support strains above 80% with modest electromechanical coupling (gauge factor ≈1). These mechanically robust thin‐film circuits are well suited for transfer to highly curved and nondevelopable 3D surfaces as well as skin and other soft deformable substrates. In contrast to other stretchable tattoo‐like electronics, the low‐cost processing steps introduced here eliminate the need for cleanroom fabrication and instead requires only a commercial desktop printer. Most significantly, it enables functionalities like “electronic tattoos” and 3D hydrographic transfer that have not been previously reported with EGaIn or EGaIn‐based biphasic electronics.     

Nitrogen‐Doped Carbon Encapsulated Mesoporous Vanadium Nitride Nanowires as Self‐Supported Electrodes for Flexible All‐Solid‐State Supercapacitors

Flexible 3D nanoarchitectures have received tremendous interest recently because of their potential applications in flexible/wearable energy storage devices. Herein, 3D intertwined nitrogen‐doped carbon encapsulated mesoporous vanadium nitride nanowires (MVN@NC NWs) are investigated as thin, lightweight, and self‐supported electrodes for flexible supercapacitors (SCs). The MVN NWs have abundant active sites accessible to charge storage, and the N‐doped carbon shell suppresses electrochemical dissolution of the inner MVN NWs in an alkaline electrolyte, leading to excellent capacitive properties. The flexible MVN@NC NWs film electrode delivers a high areal capacitance of 282 mF cm⁻² and exhibits excellent long‐term stability with 91.8% capacitance retention after 12 000 cycles in a KOH electrolyte. All‐solid‐state flexible SCs assembled by sandwiching two flexible MVN@NC NWs film electrodes with alkaline poly(vinyl alcohol) (PVA), sodium polyacrylate, and KOH gel electrolyte boast a high volumetric capacitance of 10.9 F cm⁻³, an energy density of 0.97 mWh cm⁻³, and a power density of 2.72 W cm⁻³ at a current density of 0.051 A cm⁻³ based on the entire cell. By virtue of the excellent mechanical flexibility, high capacitance, and large energy/power density, the self‐supported MVN@NC NWs paper‐like electrodes have large potential applications in portable and wearable flexible electronics.     

Multifunctional Nanocomposites with High Strength and Capacitance Using 2D MXene and 1D Nanocellulose

The family of two‐dimensional (2D) metal carbides and nitrides, known as MXenes, are among the most promising electrode materials for supercapacitors thanks to their high metal‐like electrical conductivity and surface‐functional‐group‐enabled pseudocapacitance. A major drawback of these materials is, however, the low mechanical strength, which prevents their applications in lightweight, flexible electronics. A strategy of assembling freestanding and mechanically robust MXene (Ti₃C₂T_x ) nanocomposites with one‐dimensional (1D) cellulose nanofibrils (CNFs) from their stable colloidal dispersions is reported. The high aspect ratio of CNF (width of ≈3.5 nm and length reaching tens of micrometers) and their special interactions with MXene enable nanocomposites with high mechanical strength without sacrificing electrochemical performance. CNF loading up to 20%, for example, shows a remarkably high mechanical strength of 341 MPa (an order of magnitude higher than pristine MXene films of 29 MPa) while still maintaining a high capacitance of 298 F g^?1 and a high conductivity of 295 S cm^?1. It is also demonstrated that MXene/CNF hybrid dispersions can be used as inks to print flexible micro‐supercapacitors with precise dimensions. This work paves the way for fabrication of robust multifunctional MXene nanocomposites for printed and lightweight structural devices.     

Lead‐Free Perovskite Nanowire‐Employed Piezopolymer for Highly Efficient Flexible Nanocomposite Energy Harvester

In the past two decades, mechanical energy harvesting technologies have been developed in various ways to support or power small‐scale electronics. Nevertheless, the strategy for enhancing current and charge performance of flexible piezoelectric energy harvesters using a simple and cost‐effective process is still a challenging issue. Herein, a 1D–3D (1‐3) fully piezoelectric nanocomposite is developed using perovskite BaTiO₃ (BT) nanowire (NW)‐employed poly(vinylidene fluoride‐co‐trifluoroethylene) (P(VDF‐TrFE)) for a high‐performance hybrid nanocomposite generator (hNCG) device. The harvested output of the flexible hNCG reaches up to ≈14 V and ≈4 µA, which is higher than the current levels of even previous piezoceramic film‐based flexible energy harvesters. Finite element analysis method simulations study that the outstanding performance of hNCG devices attributes to not only the piezoelectric synergy of well‐controlled BT NWs and within P(VDF‐TrFE) matrix, but also the effective stress transferability of piezopolymer. As a proof of concept, the flexible hNCG is directly attached to a hand to scavenge energy using a human motion in various biomechanical frequencies for self‐powered wearable patch device applications. This research can pave the way for a new approach to high‐performance wearable and biocompatible self‐sufficient electronics.     

A Quasi‐Solid‐State Flexible Fiber‐Shaped Li–CO2 Battery with Low Overpotential and High Energy Efficiency

The rapid development of wearable electronics requires a revolution of power accessories regarding flexibility and energy density. The Li–CO₂ battery was recently proposed as a novel and promising candidate for next‐generation energy‐storage systems. However, the current Li–CO₂ batteries usually suffer from the difficulties of poor stability, low energy efficiency, and leakage of liquid electrolyte, and few flexible Li–CO₂ batteries for wearable electronics have been reported so far. Herein, a quasi‐solid‐state flexible fiber‐shaped Li–CO₂ battery with low overpotential and high energy efficiency, by employing ultrafine Mo₂C nanoparticles anchored on a carbon nanotube (CNT) cloth freestanding hybrid film as the cathode, is demonstrated. Due to the synergistic effects of the CNT substrate and Mo₂C catalyst, it achieves a low charge potential below 3.4 V, a high energy efficiency of ≈80%, and can be reversibly discharged and charged for 40 cycles. Experimental results and theoretical simulation show that the intermediate discharge product Li₂C₂O₄ stabilized by Mo₂C via coordinative electrons transfer should be responsible for the reduction of overpotential. The as‐fabricated quasi‐solid‐state flexible fiber‐shaped Li–CO₂ battery can also keep working normally even under various deformation conditions, giving it great potential of becoming an advanced energy accessory for wearable electronics.     

Flexible Zinc‐Ion Hybrid Fiber Capacitors with Ultrahigh Energy Density and Long Cycling Life for Wearable Electronics

Emerging wearable electronics require flexible energy storage devices with high volumetric energy and power densities. Fiber‐shaped capacitors (FCs) offer high power densities and excellent flexibility but low energy densities. Zn‐ion capacitors have high energy density and other advantages, such as low cost, nontoxicity, reversible Faradaic reaction, and broad operating voltage windows. However, Zn‐ion capacitors have not been applied in wearable electronics due to the use of liquid electrolytes. Here, the first quasisolid‐state Zn‐ion hybrid FC (ZnFC) based on three rationally designed components is demonstrated. First, hydrothermally assembled high surface area and conductive reduced graphene oxide/carbon nanotube composite fibers serve as capacitor‐type positive electrodes. Second, graphite fibers coated with a uniform Zn layer work as battery‐type negative electrodes. Third, a new neutral ZnSO₄‐filled polyacrylic acid hydrogel act as the quasisolid‐state electrolyte, which offers high ionic conductivity and excellent stretchability. The assembled ZnFC delivers a high energy density of 48.5 mWh cm^?3 at a power density of 179.9 mW cm^?3. Further, Zn dendrite formation that commonly happens under high current density is efficiently suppressed on the fiber electrode, leading to superior cycling stability. Multiple ZnFCs are integrated as flexible energy storage units to power wearable devices under different deformation conditions.     

Anticorrosive,Ultralight, and Flexible Carbon‐Wrapped Metallic Nanowire Hybrid Sponges for Highly Efficient Electromagnetic Interference Shielding

Metal‐based materials with exceptional intrinsic conductivity own excellent electromagnetic interference (EMI) shielding performance. However, high density, corrosion susceptibility, and poor flexibility of the metal severely restrict their further applications in the areas of aircraft/aerospace, portable and wearable smart electronics. Herein, a lightweight, flexible, and anticorrosive silver nanowire wrapped carbon hybrid sponge (Ag@C) is fabricated and employed as ultrahigh efficiency EMI shielding material. The interconnected Ag@C hybrid sponges provide an effective way for electron transport, leading to a remarkable conductivity of 363.1 S m^?1 and superb EMI shielding effectiveness of around 70.1 dB in the frequency range of 8.2–18 GHz, while the density is as low as 0.00382 g cm^?3, which are among the best performances for electrically conductive sponges/aerogels/foams by far. More importantly, the Ag@C sponge surprisingly exhibits super‐hydrophobicity and strong corrosion resistance. In addition, the hybrid sponges possess excellent mechanical resilience even with a large strain (90% reversible compressibility) and an outstanding cycling stability, which is far better than the bare metallic aerogels, such as silver nanowire aerogels and copper nanowire foams. This strategy provides a facile methodology to fabricate lightweight, flexible, and anticorrosive metal‐based sponge for highly efficient EMI shielding applications.     

High Areal Capacity Li‐Ion Storage of Binder‐Free Metal Vanadate/Carbon Hybrid Anode by Ion‐Exchange Reaction

Storing more energy in a limited device area is very challenging but crucial for the applications of flexible and wearable electronics. Metal vanadates have been regarded as a fascinating group of materials in many areas, especially in lithium‐ion storage. However, there has not been a versatile strategy to synthesize flexible metal vanadate hybrid nanostructures as binder‐free anodes for Li‐ion batteries so far. A convenient and versatile synthesis of M_xV_yO_x+2.5y@carbon cloth (M = Mn, Co, Ni, Cu) composites is proposed here based on a two‐step hydrothermal route. As‐synthesized products demonstrate hierarchical proliferous structure, ranging from nanoparticles (0D), and nanobelts (1D) to a 3D interconnected network. The metal vanadate/carbon hybrid nanostructures exhibit excellent lithium storage capability, with a high areal specific capacity up to 5.9 mAh cm^?2 (which equals to 1676.8 mAh g^?1) at a current density of 200 mA g^?1. Moreover, the nature of good flexibility, mixed valence states, and ultrahigh mass loading density (over 3.5 mg cm^?2) all guarantee their great potential in compact energy storage for future wearable devices and other related applications.     

A Water‐/Fireproof Flexible Lithium–Oxygen Battery Achieved by Synergy of Novel Architecture and Multifunctional Separator

To meet the increasing demands for portable and flexible devices in a rapidly developing society, it is urgently required to develop highly safe and flexible electrochemical energy‐storage systems. Flexible lithium–oxygen batteries with high theoretical specific energy density are promising candidates; however, the conventional half‐open structure design prevents it from working properly under water or fire conditions. Herein, as a proof‐of‐concept experiment, a highly safe flexible lithium–oxygen battery achieved by the synergy of a vital multifunctional structure design and a unique composite separator is proposed and fabricated. The structure can effectively prevent the invasion of water from the environment and combustion, which is further significantly consolidated with the help of a polyimide and poly(vinylidene fluoride‐co‐hexafluoropropylene) composite separator, which holds good water resistance, thermal stability, and ionic conductivity. Unexpectedly, the obtained lithium–oxygen battery exhibits superior flexibility, water resistance, thermal resistance, and cycling stability (up to 218 cycles; at a high current of 1 mA and capacity of 4 mA h). This novel water/fireproof, flexible lithium–oxygen battery is a promising candidate to power underwater flexible electronics.     

Highly Crystalline C8‐BTBT Thin‐Film Transistors by Lateral Homo‐Epitaxial Growth on Printed Templates

Highly crystalline thin films of organic semiconductors offer great potential for fundamental material studies as well as for realizing high‐performance, low‐cost flexible electronics. The fabrication of these films directly on inert substrates is typically done by meniscus‐guided coating techniques. The resulting layers show morphological defects that hinder charge transport and induce large device‐to‐device variability. Here, a double‐step method for organic semiconductor layers combining a solution‐processed templating layer and a lateral homo‐epitaxial growth by a thermal evaporation step is reported. The epitaxial regrowth repairs most of the morphological defects inherent to meniscus‐guided coatings. The resulting film is highly crystalline and features a mobility increased by a factor of three and a relative spread in device characteristics improved by almost half an order of magnitude. This method is easily adaptable to other coating techniques and offers a route toward the fabrication of high‐performance, large‐area electronics based on highly crystalline thin films of organic semiconductors.     

Crab Chitin‐Based 2D Soft Nanomaterials for Fully Biobased Electric Devices

2D nanomaterials have various size/morphology‐dependent properties applicable in electronics, optics, sensing, and actuating. However, intensively studied inorganic 2D nanomaterials are frequently hindered to apply in some particular and industrial fields, owing to harsh synthesis, high‐cost, cytotoxicity, and nondegradability. Endeavor has been made to search for biobased 2D nanomaterials with biocompatibility, sustainability, and biodegradability. A method of hydrophobization‐induced interfacial‐assembly is reported to produce an unprecedented type of nanosheets from marine chitin. During this process, two layers of chitin aggregations assemble into nanosheets with high aspect ratio. With super stability and amphiphilicity, these nanosheets have super ability in creating highly stable Pickering emulsions with internal phase up to 83.4% and droplet size up to 140 μm, in analogue to graphene oxide. Combining emulsifying and carbonization can further convert these 2D precursors to carbon nanosheets with thickness as low as ≈3.8 nm. Having biologic origin, conductivity, and dispersibility in various solvents, resultant carbon nanosheets start a new scenario of exploiting marine resources for fully biobased electric devices with sustainability and biodegradability, e.g., supercapacitor, flexible circuits, and electronic sensors. Hybrid films of chitin and carbon nanosheets also offer low‐cost and environment‐friendly alternative of conductive components desirable in green electronics, wearable electronics, biodegradable circuits, and biologic devices.     

Silver‐Quantum‐Dot‐Modified MoO3 and MnO2 Paper‐Like Freestanding Films for Flexible Solid‐State Asymmetric Supercapacitors

Free‐standing paper‐like thin‐film electrodes have great potential to boost next‐generation power sources with highly flexible, ultrathin, and lightweight requirements. In this work, silver‐quantum‐dot‐ (2–5 nm) modified transition metal oxide (including MoO₃ and MnO₂) paper‐like electrodes are developed for energy storage applications. Benefitting from the ohmic contact at the interfaces between silver quantum dots and MoO₃ nanobelts (or MnO₂ nanowires) and the binder‐free nature and 0D/1D/2D nanostructured 3D network of the fabricated electrodes, substantial improvements on the electrical conductivity, efficient ionic diffusion, and areal capacitances of the hybrid nanostructure electrodes are observed. With this proposed strategy, the constructed asymmetric supercapacitors, with Ag quantum dots/MoO₃ “paper” as anode, Ag quantum dots/MnO₂ “paper” as cathode, and neutral Na₂SO₄/polyvinyl alcohol hydrogel as electrolyte, exhibit significantly enhanced energy and power densities in comparison with those of the supercapacitors without modification of Ag quantum dots on electrodes; present excellent cycling stability at different current densities and good flexibility under various bending states; offer possibilities as high‐performance power sources with low cost, high safety, and environmental friendly properties.     

Advanced Carbon for Flexible and Wearable Electronics

Flexible and wearable electronics are attracting wide attention due to their potential applications in wearable human health monitoring and care systems. Carbon materials have combined superiorities such as good electrical conductivity, intrinsic and structural flexibility, light weight, high chemical and thermal stability, ease of chemical functionalization, as well as potential mass production, enabling them to be promising candidate materials for flexible and wearable electronics. Consequently, great efforts are devoted to the controlled fabrication of carbon materials with rationally designed structures for applications in next‐generation electronics. Herein, the latest advances in the rational design and controlled fabrication of carbon materials toward applications in flexible and wearable electronics are reviewed. Various carbon materials (carbon nanotubes, graphene, natural‐biomaterial‐derived carbon, etc.) with controlled micro/nanostructures and designed macroscopic morphologies for high‐performance flexible electronics are introduced. The fabrication strategies, working mechanism, performance, and applications of carbon‐based flexible devices are reviewed and discussed, including strain/pressure sensors, temperature/humidity sensors, electrochemical sensors, flexible conductive electrodes/wires, and flexible power devices. Furthermore, the integration of multiple devices toward multifunctional wearable systems is briefly reviewed. Finally, the existing challenges and future opportunities in this field are summarized.     

Roll‐to‐Roll Production of Graphene Hybrid Electrodes for High‐Efficiency,Flexible Organic Photoelectronics

Despite nearly two decades of research, the absence of ideal, flexible, and transparent electrodes has been the biggest bottleneck for realizing flexible and printable electronics via roll‐to‐roll (R2R) method. A fabrication of poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate):graphene:ethyl cellulose (PEDOT:PSS:G:EC) hybrid electrodes by R2R process, which allows for the elimination of strong acid treatment. The high‐performance flexible printable electrode includes a transmittance (T) of 78% at 550 nm and a sheet resistance of 13 Ω sq⁻¹ with excellent mechanical stability. These features arise from the PSS interacting strongly with the ethyoxyl groups from EC promoting a favorable phase separation between PEDOT and PSS chains, and the highly uniform and conductive G:EC enable rearrangement of the PEDOT chains with more expanded conformation surrounded by G:EC via the π–π interaction between G:EC and PEDOT. The hybrid electrodes are fully functional as universal electrodes for outstanding flexible electronic applications. Organic solar cells based on the hybrid electrode exhibit a high power conversion efficiency of 9.4% with good universality for active layer. Moreover, the organic light‐emitting diodes and photodetector devices hold the same level to or outperform those based on indium tin oxide flexible transparent electrodes.     

Hollow MXene Spheres and 3D Macroporous MXene Frameworks for Na‐Ion Storage

2D transition metal carbides and nitrides, named MXenes, are attracting increasing attentions and showing competitive performance in energy storage devices including electrochemical capacitors, lithium‐ and sodium‐ion batteries, and lithium–sulfur batteries. However, similar to other 2D materials, MXene nanosheets are inclined to stack together, limiting the device performance. In order to fully utilize MXenes' electrochemical energy storage capability, here, processing of 2D MXene flakes into hollow spheres and 3D architectures via a template method is reported. The MXene hollow spheres are stable and can be easily dispersed in solvents such as water and ethanol, demonstrating their potential applications in environmental and biomedical fields as well. The 3D macroporous MXene films are free‐standing, flexible, and highly conductive due to good contacts between spheres and metallic conductivity of MXenes. When used as anodes for sodium‐ion storage, these 3D MXene films exhibit much improved performances compared to multilayer MXenes and MXene/carbon nanotube hybrid architectures in terms of capacity, rate capability, and cycling stability. This work demonstrates the importance of MXene electrode architecture on the electrochemical performance and can guide future work on designing high‐performance MXene‐based materials for energy storage, catalysis, environmental, and biomedical applications.     

Hydrophobic,Flexible, and Lightweight MXene Foams for High‐Performance Electromagnetic‐Interference Shielding

Ultrathin, lightweight, and flexible electromagnetic‐interference (EMI) shielding materials are urgently required to manage increasingly serious radiation pollution. 2D transition‐metal carbides (MXenes) are considered promising alternatives to graphene for providing excellent EMI‐shielding performance due to their outstanding metallic electrical conductivity. However, the hydrophilicity of MXene films may affect their stability and reliability when applied in moist or wet environments. Herein, for the first time, an efficient and facile approach is reported to fabricate freestanding, flexible, and hydrophobic MXene foam with reasonable strength by assembling MXene sheets into films followed by a hydrazine‐induced foaming process. In striking contrast to well‐known hydrophilic MXene materials, the MXene foams surprisingly exhibit hydrophobic surfaces and outstanding water resistance and durability. More interestingly, a much enhanced EMI‐shielding effectiveness of ≈70 dB is achieved for the lightweight MXene foam as compared to its unfoamed film counterpart (53 dB) due to the highly efficient wave attenuation in the favorable porous structure. Therefore, the hydrophobic, flexible, and lightweight MXene foam with an excellent EMI‐shielding performance is highly promising for applications in aerospace and portable and wearable smart electronics.     

Laminated Object Manufacturing of 3D‐Printed Laser‐Induced Graphene Foams

Laser‐induced graphene (LIG), a graphene structure synthesized by a one‐step process through laser treatment of commercial polyimide (PI) film in an ambient atmosphere, has been shown to be a versatile material in applications ranging from energy storage to water treatment. However, the process as developed produces only a 2D product on the PI substrate. Here, a 3D LIG foam printing process is developed on the basis of laminated object manufacturing, a widely used additive‐manufacturing technique. A subtractive laser‐milling process to yield further refinements to the 3D structures is also developed and shown here. By combining both techniques, various 3D graphene objects are printed. The LIG foams show good electrical conductivity and mechanical strength, as well as viability in various energy storage and flexible electronic sensor applications.