RAPWBN模型上的快速高效并行排序算法

在介绍带有宽总线网络的可重构计算模型(RAPWBN)的基本结构及其二进制值的前缀和操作的基础上,提出了RAPWBN模型上的抽取压缩操作算法,并由此得到了RAPWBN模型上的两种快速高效并行排序算法,对长度为N的序列进行排序,在具有N2个处理器和N条行总线的RAPWBN模型上,若总线带宽ω＞logN字节,可以在O(1)时间完成排序.在具有N个处理器和N条行总线的RAPWBN模型上,最好情况下以O(logN)时间、最坏情况下以O(N)时间完成排序.     

带有宽总线网络的可重构计算模型上的并行排序算法

在介绍带有宽总线网络的可重构计算模型(RAPWBN)的基本结构及其二进制值的前缀和操作的基础上,提出了RAPWBN模型上的抽取压缩操作算法,并由此得到了RAPWBN模型上的快速高效并行排序算法,在具有N个处理机和N条行总线的RAPWBN模型上,若总线带宽ω>logN字节,则对元素位数固定的N个元素可以在O(1)时间完成排序,对元素位数不固定的N个元素,可以在O(k)时间完成排序,这里k为元素的最大位数.     

带有宽总线网络的可重构计算模型上的并行归并排序算法

在介绍带有宽总线网络的可重构计算模型(RAPWBN)的二进制值的前缀和操作的基础上,提出了该模型上的抽取压缩操作算法,并由此得到了该模型上的并行归并排序算法。在具有N个处理器和N条行总线的RAPWBN模型上,若总线带宽ω>log N字节,对长度为N的序列进行归并排序,在最坏情况下以O(logN·loglogN)时间完成。     

RAPWBN计算模型上的快速并行归并排序算法

在介绍带有宽总线网络的可重构计算模型(RAPWBN)的基本结构及其二进制值的前缀和操作的基础上,提出该模型上的一种并行归并排序算法,在具有N~α(1＜α＜2)个处理器和N条行总线的RAPWBN模型上,若总线带宽ω>logN字节,对长度为N的序列进行归并排序,可以在O((loglogN)~2)时间完成.     

RAPWBN的矩阵乘法并行算法

在介绍带有宽总线网络的可重构计算阵列(RAPWBN)的基本结构及其二进制值的前缀和操作的基础上,提出了 RAPWBN 阵列上的整数求和算法,并由此得到了 RAPWBN 阵列上的两种快速高效的矩阵乘法运算并行算法。在具有 N3个处理器和 N2条行总线的 RAPWBN 阵列上,若总线带宽ω>logN 字节,矩阵乘法可以在 O(1)时间完成;在具有 N2个处理器和 N 条行总线的 RAPWBN 阵列上,矩阵乘法可以在 O(N)时间完成。它们的效率都为 O(N3),达到了最优。     

基于流水光总线阵列上的快速可扩展并行排序算法

在Y．Pan提出的基于流水光总线阵列模型(LARPBS)上使用N个处理器对N个元素进行排序在最好情况下以O(logN)时间，最坏情况下以O(N)时间完成的并行排序算法的基础上，提出了一种LARPBS模型上的可扩展的快速并行排序算法，对N个元素进行排序，使用p(1≤P≤N)个处理器在最好情况下以O(NlogN／p)时间，最坏情况下以O(N^2／p)时间完成排序。另外还提出了一种LARPBS模型上改进的快速高效并行排序算法，该算法对N个元素进行排序使用N个处理器在最好情况下以O(log√N)时间、最坏情况下以O(√N)时间完成排序。     

基于RAPWBN模型的快速高效Hough变换并行算法

提出了RAPWBN模型上的整数前缀和与抽取压缩操作算法，并由此得到了RAPWBN模型上的快速高效Hough变换并行算法，对于大小为n×n的二值数字图像，p个θ参数值。可以使用pn2个处理器在O(1)时间完成。使算法的速度和效率达到了最优。     

基于流水光总线阵列上Valiant并行归并排序的实现

基于流水总线的可重构线性阵列系统（LARPBS）是一种建立在光总线上的并行计算模型，许多研究工作者已经在该模型上设计出了一些高效的并行算法。文章提出了一种基于LARPBS模型上Vnliant并行归并的实现算法，利用该法对长度为N的序列进行排序，最坏情况下可以使用N个处理器在O（logNloglogN)时间完成。     

基于流水光总线阵列的快速并行排序算法

基于流水光总线的可重构线性阵列系统(LARPBS)是一种建立在光总线上的并行计算模型。本文提出了一种基于LARPBS模型的快速排序并行算法，该算法使用n个处理器，对关 键字位数固定的n个记录可以在O(1)时间完成排序；对于关键字位数不固定的n个记录，可以在O(d)时间完成排序，这里d为关键字的最大位数。     

基于流水光总线模型的快速归并排序算法

文章提出了一种LARPBS模型上的并行归并排序算法,利用该算法对长度为N的序列进行排序,使用N~(1+)着(0<着<1)个处理机可以在O((loglogN)~2)时间完成。     

Optimal algorithms for the channel-assignment problem on a reconfigurable array of processors with wider bus networks

The computation model on which the algorithms are developed is the reconfigurable array of processors with wider bus networks (abbreviated to RAPWBN). The main difference between the RAPWBN model and other existing reconfigurable parallel processing systems is that the bus width of each network is bounded within the range [2,[/spl radic/(N)]]. Such a strategy not only saves the silicon area of the chip as well as increases the computational power enormously, but the strategy also allows the execution speed of the proposed algorithms to be tuned by the bus bandwidth. To demonstrate the computational power of the RAPWBN, the channel-assignment problem is derived in this paper. For the channel-assignment problem with N pairs of components, we first design an O(T + [N//spl omega/]) time parallel algorithm using 2N processors with a 2N-row by 2N-column bus network, where the bus width of each bus network is /spl omega/-bit for 2 /spl les/ /spl omega/ /spl les/ [/spl radic/N] and T = [log/sub /spl omega//N] + 1. By tuning the bus bandwidth to the natural log N-bit and the extended N/sup 1/c/-bit (N/sup 1/c/ > log N) for any constant c and c /spl ges/ 1, two more results which run in O(log N/log log N) and O(1) time, respectively, are also derived. When compared to the algorithms proposed by Olariu et al. [17] and Lin [14], it is shown that our algorithm runs in the equivalent time complexity while significantly reducing the number of processors to O(N).     

A fast algorithm for computing a histogram on reconfigurable mesh

The reconfigurable mesh captures salient features from a variety of sources, including the content addressable array parallel processor, the CHiP, the polymorphic-torus network and the bus automaton. It consists of an array of processors interconnected by a reconfigurable bus system. The bus system can be used to dynamically obtain various interconnection patterns between the processors. In this paper, we present a fast algorithm for computing the histogram of an N×N image with h grey levels in O(min{√h+log*(N/h),N}) time on an N×N reconfigurable mesh assuming each PE has a constant amount of local memory. This algorithm runs on the PARBUS and MRN/LRN models. In addition, histogram modification can be performed in O(√h) time on the same model. A variant of out algorithm runs in O(min{√h+log log(N/h),N}) time on an N×N RMESH in which each PE has constant storage. This result improves the known time and memory bounds for histogramming on the RMESH model     

An improved constant-time algorithm for computing the Radon andHough transforms on a reconfigurable mesh

The Hough transform is an important problem in image processing and computer vision. An efficient algorithm for computing the Hough transform has been proposed on a reconfigurable array by Kao et al. (1995). For a problem with an √N×√N image and an n×n parameter space, the algorithm runs in a constant time on a three-dimensional (3-D) n×n×N reconfigurable mesh where the data bus is N¹c/-bit wide. To our best knowledge, this is the most efficient constant-time algorithm for computing the Hough transform on a reconfigurable mesh. In this paper, an improved Hough transform algorithm on a reconfigurable mesh is proposed. For the same problem, our algorithm runs in constant time on a 3-D n*n×n×√n√n reconfigurable mesh, where the data bus is only log N-bit wide. In most practical situations, n=O(√N). Hence, our algorithm requires much less VLSI area to accomplish the same task. In addition, our algorithm can compute the Radon transform (a generalized Hough transform) in O(1) time on the same model, whereas the algorithm in the above paper cannot be adapted to computing Radon transform easily     

基于LARPBS模型的最大值查找算法

具备可重配置流水线总线的线性阵列LARPBS(1inear arrays with a reconfigurable pipelined bus systems)是近来出现的一种高效的并行计算模型．与理想的PRAM模型不同．LARPBS是现实可行的。基于LARPBS模型，Y．Pan介绍了2种宽度和精度任意的数据项的最大值查找算法：算法1使用了N^2／2个处理机、O(1)时间，它是目前时间最优的算法；算法2使用了N个处理机、O(loglogN)时间。本文介绍了2种最大值查找算法．时间复杂度同Y.Pan的算法，但所用处理机数减少了一半．这是对Y．Pan算法的重要改进。     

基于动态模型的公交车行程时间预测

准确以及实时的公交车行程时间信息能够帮助出行者更好地规划行程,减少出行者的等待时间。提出了一种基于SVM-Kalman滤波的公交车行程时间动态预测模型。模型中,经过良好训练的SVM模型从历史数据进行预测得到行程时间基准;Kalman滤波动态算法在基于SVM模型预测值和最新公交出行信息的基础上对结果进行调整。以深圳市223路常规公交线路为实例,将动态模型的预测精度结果与单一SVM模型、ANN模型结果进行对比,结果表明,基于SVM-Kalman滤波的公交车行程时间动态预测模型的预测精度更高、动态性能更好。