多故障并发非线性系统一体化跟踪主动容错控制器设计

针对一类执行器及传感器同时发生故障的非线性系统,综合鲁棒滑模重构观测器及自适应滑模容错控制器设计技术,提出一体化跟踪主动容错控制方案.首先,将系统增维变换为广义系统,运用广义约束逆引入辅助矩阵,采用线性矩阵不等式设计观测器系数矩阵,综合自适应律给出广义鲁棒滑模观测器设计程式;在此基础之上,通过设计鲁棒滑模微分器估计输出向量微分,结合广义鲁棒滑模观测器状态估计结论,实现执行器及传感器故障同时重构.其次,基于故障重构及状态估计结论,提出自适应滑模的跟踪主动容错控制律设计程式.最后,通过开展飞行模拟转台伺服系统数值仿真,检验一体化跟踪主动容错控制器设计方法的有效性.     

基于鲁棒滑模观测器的多电机卷绕系统故障检测和隔离

针对多电机卷绕系统故障检测和隔离问题,提出了基于滑模观测器的鲁棒故障检测和隔离策略.首先,考虑到多电机卷绕系统运行环境变化引起的摩擦系数、杨式模量、半径和转动惯量等参数的不确定性,通过引入非线性未知输入干扰对系统不确定参数进行描述,将多电机卷绕系统转化为包含执行器故障的一般不确定非线性系统;其次,构造鲁棒滑模观测器并用作故障检测观测器,通过滑模控制来抑制未知输入干扰,使观测器具有鲁棒性,在此基础上,结合多观测器故障隔离的思想,提出了可以同时对多个执行器故障进行检测和隔离的方法;然后,根据李雅普诺夫理论得到使观测器系统指数收敛的充分条件,同时给出了观测器增益的求解方法;最后,仿真结果验证了所提方法的鲁棒性和有效性.     

基于自适应滑模观测器的不匹配非线性系统执行器故障重构

针对一类含有未知干扰的不匹配非线性Lipschitz系统,提出了基于自适应滑模观测器的执行器故障重构方法.首先引入辅助输出矩阵,使得辅助输出系统的观测器匹配条件得以满足,同时设计了高增益观测器实现对未知辅助输出的精确估计;然后针对辅助输出系统建立故障重构滑模观测器,设计了自适应律在线修正滑模控制器增益,考虑故障上界未知的前提下,提出了观测器状态估计误差稳定的存在定理,运用Schur补引理将观测器反馈增益矩阵设计方法转化为求解线性矩阵不等式约束优化问题,同时引入线性变换矩阵,在故障上界未知的前提下设计了滑模控制增益,使得输出估计误差收敛稳定,确保了滑模运动在有限时间内发生,在此基础上利用等效控制输出误差注入原理实现了执行器故障重构;最后通过仿真算例验证了本文方法的有效性.     

汽车稳定控制系统执行器与传感器故障诊断与估计

汽车稳定控制系统具有明显的非线性特性,对其传感器与执行器的故障诊断具有一定难度。从汽车八自由度模型入手,简化模型并建立虚拟输入。针对虚拟输入模型,将虚拟执行器故障作为增广状态向量的一部分,构造一个增广系统。利用李雅普诺夫理论设计观测器,获得原系统状态与虚拟执行器故障的渐近估计,并分析了增广观测器的稳定性与收敛性。通过LMI技术实现线性矩阵不等式求解,完成观测器设计。选择一个新的状态变量作为输出信号滤波器,将传感器故障转化为执行器故障,建立二增广系统,直接利用执行器故障诊断方法实现传感器故障诊断。通过Simulink,验证了此方法的可行性。与其他方法相比,该方法不仅能够同时得到虚拟执行器与传感器故障信号,为系统提供警示,而且为后续的容错控制设计提供可靠数据。     

一种非线性系统被控对象故障诊断方法

控制系统中的传感器、执行器和被控对象的故障检测与诊断往往是把执行器和被控对象视为一个整体来研究, 这不利于故障的决策与处理. 对此, 设计了非线性系统故障诊断的滑模观测器, 提出一种诊断被控对象故障的方法, 即对非线性系统和执行器同时进行观测, 根据两观测器残差的变化情况判断出非线性系统中传感器、执行器和被控对象故障. 最后以单输入单输出非线性系统为例进行仿真, 验证了该方法的有效性.

     

一种滑模观测器的多故障诊断方法

针对非线性系统的执行器故障及传感器故障,提出一种鲁棒多故障检测方法．首先,对可能发生的每种执行器故障分别构造模型,并设计相应的滑模观测器用于残差生成,从而实现执行器故障检测．然后,设计一种算法,利用简单滤波器将传感器故障转换为执行器故障,从而直接利用执行器故障检测的方法实现传感器故障的检测,将执行器故障的检测方法推广到执行器、传感器故障同时存在的情况．最后,通过在单关节机械手中的仿真应用验证了所提方法的有效性．     

不确定动态系统的执行器故障检测与重构

讨论不确定动态系统的执行器故障检测与重构问题.以滑模观测器为基础,利用状态和输出变换方法与奇异值分解方法相结合对系统进行降阶,提出一种鲁棒故障重构观测器.给出了优化滑模策略,并作了严格论证,保证对系统不确定性具有鲁棒性和跟踪系统状态的收敛性.应用等价输出控制的概念和设计的鲁棒故障重构观测器,获取故障信息并实现执行器故障的检测与重构.最后通过数值仿真验证了该方法的有效性和可靠性.     

基于区间观测器的执行器故障检测

针对同时具有未知非线性函数(包括系统不确定性、外部干扰等) 和执行器故障的非线性系统, 提出基于区间观测器的故障检测方法. 首先, 在假定执行器故障不出现的前提下, 基于未知非线性函数的上下界信息, 提出两种区间观测器设计方法; 然后, 利用这两种区间观测器的输出和系统的真实输出, 构造可以对执行器故障进行检测的残差, 以此实现基于区间观测器的执行器故障检测. 最后, 通过两个仿真例子验证了所提出方法的正确性和有效性.

     

基于滑模观测器和广义观测器的故障估计方法

针对受未知干扰影响的一类非线性系统,提出一种基于滑模观测器和广义观测器的执行器故障和传感器故障估计方法.首先通过线性变换将原系统解耦为两个降阶的子系统,其中一个子系统受执行器故障和干扰的影响,另一个含有传感器故障和干扰,进一步将后一个子系统转化为广义系统.对两类子系统分别设计滑模观测器和广义观测器,给出估计误差一致最终有界的条件,得到系统状态和未知干扰的估计值.然后,利用等效输出控制原理重构执行器故障,引入干扰补偿保证重构算法的鲁棒性,再根据广义观测器的结果获得传感器故障的估计值.最后,通过计算机仿真验证了本文方法的有效性.     

一类非线性系统的故障重构与容错控制

针对一类满足Lipschitz条件的仿射非线性系统,提出一种执行器故障重构与容错控制方法。通过非奇异变化矩阵对系统进行降阶,设计出滑模故障重构观测器,优化滑模策略,使滑模故障重构观测器渐进估计系统的状态,并给出稳定性分析。运用等价输出控制方法直接获取故障信息,实现执行器故障的检测与重构。设计出主动容错控制器,通过补偿控制,完成执行器故障的容错控制。最后通过数值仿真验证了方法的可行性与有效性。     

Aero‐Engine DCS Fault‐Tolerant Control with Markov Time Delay Based On Augmented Adaptive Sliding Mode Observer

With a focus on aero‐engine distributed control systems (DCSs) with Markov time delay, unknown input disturbance, and sensor and actuator simultaneous faults, a combined fault tolerant algorithm based on the adaptive sliding mode observer is studied. First, an uncertain augmented model of distributed control system is established under the condition of simultaneous sensor and actuator faults, which also considers the influence of the output disturbances. Second, an augmented adaptive sliding mode observer is designed and the linear matrix inequality (LMI) form stability condition of the combined closed‐loop system is deduced. Third, a robust sliding mode fault tolerant controller is designed based on fault estimation of the sliding mode observer, where the theory of predictive control is adopted to suppress the influence of random time delay on system stability. Simulation results indicate that the proposed sliding mode fault tolerant controller can be very effective despite the existence of faults and output disturbances, and is suitable for the simultaneous sensor and actuator faults condition.     

基于鲁棒自适应滑模观测器的多故障重构

针对一类不确定非线性系统, 基于滑模观测器研究执行器和传感器同时故障时的鲁棒重构问题. 引入线性变换矩阵并添加后置滤波器构建增维系统, 综合??_∞ 控制将鲁棒滑模观测器增益矩阵设计方法, 转化为LMI 约束下的多目标凸优化问题. 在滑模增益中添加了自适应律, 确保状态估计误差渐近稳定, 同时滑模运动经有限时间到达滑模面, 在此基础上给出执行器和传感器故障同时重构算法. 最后通过数值算例表明了所提出方法的有效性.

     

Fault tolerant sliding mode control for T-S fuzzy stochastic time-delay system via a novel sliding mode observer approach

In this paper, a fault estimation and fault-tolerant control problem for a class of T-S fuzzy stochastic time-delay systems with actuator and sensor faults is investigated. A novel sliding mode observer is proposed, which can simultaneously estimate the system states, actuator and sensor faults with good accuracy. Based on the state and actuator fault estimation, a new sliding mode control scheme is developed, which can effectively eliminate the influence of actuator fault. Sufficient conditions for the existence of the proposed observer and fault-tolerant sliding mode controller are provided in terms of linear matrix inequality, and moreover, the reachability of the sliding mode surface can be guaranteed under the proposed control scheme. The propose sliding mode observer and fault-tolerant sliding mode controller can overcome the restrictive assumption that the input matrix of all local modes is the same. Finally, a numerical example is provided to verify the effectiveness of the proposed sliding mode observer and fault-tolerant sliding mode control technique.     

Simultaneous Actuator and Sensor Faults Reconstruction Based on Robust Sliding Mode Observer for a Class of Nonlinear Systems

This paper proposes a new robust fault reconstruction and estimation design for a class of nonlinear system described by the Takagi‐Sugeno model with unmeasurable premise variables subject to faults affecting actuators, sensor faults, and unknown disturbances. The augmented Takagi‐Sugeno system is introduced with a new fault vector which has two origins: the first one represents actuator faults, the second one denotes faults affecting sensors. The main contribution is focused primarily to conceive a sliding mode observer with two discontinuous terms designed to compensate for fault behavior and disturbance variation from the system states estimation. In the formalism of linear matrix inequalities, we derive sufficient conditions to guarantee the state estimation error stability and to obtain the observer gains. Meanwhile, additional effort is made to achieve simultaneous faults and disturbance reconstruction. Simulation results are given to illustrate the proposed approach performances.     

Fault detection and isolation design for uncertain nonlinear systems based on full-order,reduced-order and high-order high-gain sliding-mode observers

This paper considers the observer-based fault detection and isolation design problems when the observer matching condition is not satisfied. Based on the relative degree concept, an auxiliary output vector that may satisfy the observer matching condition is constructed. Since the auxiliary output vector contains unknown information, we use a high-order high-gain sliding-mode observer to exactly estimate not only the auxiliary outputs, but also their derivatives in a finite time. Then, an adaptive robust full-order observer is developed to serve as an actuator fault detection observer. For the actuator fault reconstruction purpose, a reduced-order observer is proposed to estimate the system states even if there are some actuator faults and an actuator fault reconstruction method is provided to reach the fault isolation purpose. A numerical simulation example is used to illustrate the effectiveness of the proposed methods.