Actuator fault detection and isolation in linear systems

A scheme for the detection and isolation of actuator faults in linear systems is proposed. A bank of unknown input observers is constructed to generate residual signals which will deviate in characteristic ways in the presence of actuator faults. Residual signals are unaffected by the unknown inputs acting on the system and this decreases the false alarm and miss probabilities. The results are illustrated through a simulation study of actuator fault detection and isolation in a pilot plant doubleeffect evaporator.     

A sliding mode observer-based strategy for fault detection,isolation, and estimation in a class of Lipschitz nonlinear systems

This article investigates the design and application of a sliding mode observer (SMO) strategy for actuator as well as sensor fault detection, isolation, and estimation (FDIE) problem for a class of uncertain Lipschitz nonlinear systems. Actuator FDIE is addressed by regrouping the system's inputs into a structure suitable for SMO design. Similarly, by filtering the regrouped outputs, a similar system structure can be developed for sensor FDIE problem. Once in the suitable form and under certain assumptions, nonlinear SMOs are proposed for actuator and sensor FDIE. A systematic LMI-based design approach for the proposed SMO is presented. Additionally, the article addresses four problems, namely: (P1) What are the conditions for isolating single and/or multiple faults? (P2) What is the maximum number of faults that can be isolated simultaneously? (P3) How should one design SMO-based FDI approach in order to achieve multiple fault isolation using as few observers as possible? (P4) How can one estimate the shape of the faults? To solve the above problems, a new concept called fault isolation index (FIX) is proposed for actuator and sensor FDIE. It is proved that fault isolation can only be achieved if FIX?≠?0, and also that the maximum number of faults that can be isolated is equal to FIX. Using the proposed fault isolation strategy and by treating some healthy inputs or outputs as unknown inputs, a systematic FDIE design scheme using a bank of nonlinear SMOs, which provides a solution for the four problems is provided. An example is used to illustrate the proposed ideas. The simulation results show that the proposed FDIE scheme can successfully detect and isolate both slowly and fast-changing actuator faults. It is also shown that accurate estimation of actuator faults can be achieved.     

基于未知输入集员滤波器的不确定系统故障诊断

针对一类具有参数不确定性和未知扰动的线性系统,提出了一种新的执行器故障诊断方法.将指定执行器故障视为未知输入,利用全对称多胞形近似状态边界,本文设计了一种未知输入全对称多胞形集员滤波器,以估计测量输出的上下边界.在此基础上,提出了一种利用一组未知输入滤波器的故障检测与分离策略.通过一个飞行控制系统的数值仿真验证了所提出方法的有效性.     

Actuator fault diagnosis for a class of nonlinear systems and its application to a laboratory 3D crane

In this paper, an actuator fault diagnosis scheme is proposed for a class of affine nonlinear systems with both known and unknown inputs. The scheme is based on a novel input/output relation derived from the considered nonlinear systems and the use of the recently developed high-order sliding-mode robust differentiators. The main advantages of the proposed approach are that it does not require a design of nonlinear observer and applies to systems not necessarily detectable. Conditions are provided to characterize the feasibility of fault detection and isolation using the proposed scheme and the maximum number of isolatable actuator faults. The efficacy of the proposed actuator fault diagnosis approach is tested through experiments on a laboratory 3D Crane, and the experimental results show that the proposed actuator fault diagnosis approach is promising and can achieve fault detection and isolation satisfactorily.     

UIO design for singular delayed LPV systems with application to actuator fault detection and isolation

In this paper, the unknown input observer (UIO) design for singular delayed linear parameter varying (LPV) systems is considered regarding its application to actuator fault detection and isolation. The design procedure assumes that the LPV system is represented in the polytopic framework. Existence and convergence conditions for the UIO are established. The design procedure is formulated by means of linear matrix inequalities (LMIs). Actuator fault detection and isolation is based on using the UIO approach for designing a residual generator that is completely decoupled from unknown inputs and exclusively sensitive to faults. Fault isolation is addressed considering two different strategies: dedicated and generalised bank of observers’ schemes. The applicability of these two schemes for the fault isolation is discussed. An open flow canal system is considered as a case study to illustrate the performance and usefulness of the proposed fault detection and isolation method in different fault scenarios.     

Robust sliding-mode observer-based multiple-fault diagnosis scheme

In this study, we simultaneously evaluate the multiple-fault diagnosis problem of a class of Lipschitz nonlinear systems with actuator and sensor faults and unknown input disturbances. A nonsingular system transformation is used to transform the original system into two subsystems for multiple-fault diagnosis: subsystems 1 and 2. At the system level, two robust sliding-mode observers (RSMOs) are proposed. An RSMO is designed for subsystem 1 to detect actuator faults subjected to unknown input disturbances, and another RSMO is designed for subsystem 2 to detect sensor faults subjected to actuator faults. At the component level, a bank of RSMOs is proposed to detect and isolate actuators (sensors) with faults using a dedicated observer scheme. The reachability of RSMOs is comprehensively investigated in the estimation error space. Accordingly, the proposed observer parameters are designed as an optimization problem and solved using the linear matrix inequality (LMI) optimization technique. The effectiveness of the proposed multiple-fault diagnosis scheme was validated through simulations of a modified seventh-order aircraft system.     

一类非线性飞行控制系统鲁棒故障诊断

针对一类仿射非线性飞行控制系统的执行器故障,提出了一种基于微分几何方法的鲁棒故障诊断方案.各个输入通道相应的不可观分布满足条件时,可以通过分别在状态空间和输出空间进行同胚变换,将原系统化为多个只受单一通道故障输入影响的能观商子系统.原系统的残差生成器设计问题转化为对其各通道能观商子系统的观测器设计,实现残差与其他通道故...     

Unknown Input Fault Detection and Isolation Observer Design for Neutral Systems

This paper deals with actuator fault diagnosis of neutral delayed systems with multiple time delays using an unknown input observer. The main purpose is to design an observer that guarantees the asymptotic stability of the estimate error dynamics and the actuator fault detection. The existence conditions for such an observer are established. The main problem studied in this paper aims at designing observer‐based fault detection and isolation. The designed observer enhances the robust diagnosis performance, including rapidity and accuracy, and generates residuals that enjoy perfect decoupling properties among faults. Based on Lyapunov stability theory, the design of the observer is formulated in terms of linear matrix inequalities, and the diagnosis scheme is based on a bank of unknown input observers for residual generation that guarantees fault detection and isolation in the presence of external disturbances. A numerical example is presented to illustrate the efficiency of the proposed approach.     

基于有限时间未知输入观测器的一类受扰非线性系统故障检测与估计

针对一类非线性系统同时存在执行器故障、传感器故障和扰动的问题,提出一种基于有限时间未知输入观测器的故障检测与估计方法.首先,通过线性非奇异变换将原系统解耦为两个降阶的子系统,其中一个子系统只包含扰动,另一个子系统同时包含扰动和故障;然后,通过一阶低通滤波器获得新的状态并与子系统构成增广系统,实现将原系统的传感器故障转化为增广系统的执行器故障;接着,设计未知输入观测器对增广系统故障进行检测,实现在有限时间内估计出系统的扰动和故障,并通过理论分析验证所设计观测器的有限时间收敛性;最后,基于永磁同步电机(PMSM)转速系统进行仿真研究,仿真结果验证了所提出方法的有效性.     

Designing fault detection observers for linear systems with mismatched unknown inputs

Algebraic unknown input observers (UIOs) that have been previously reported in the literature can be constructed under the assumption that linear systems with unknown inputs satisfy the so-called observer matching condition. This condition restricts practical applications of UIOs for fault detection and isolation (FDI). We present an algebraic design for fault detection observers (FDOs) for the case in which the observer matching condition is not satisfied. To loosen the restriction imposed by the observer matching condition, the UIO design method combined with the unknown input modeling technique is proposed to design an FDO that decouples the effect of mismatched unknown inputs. To do this, first, unknown inputs that denote the faults of no interest and process disturbances are decomposed into algebraically rejectable unknown inputs and modeled unknown inputs such that the observer matching condition is satisfied. Under the assumption that mismatched unknown inputs are deterministic and can be expressed as the responses of fictitious autonomous dynamical systems, an augmented system is obtained by combining the original system model with the unknown input model. Finally, through the design technique of a UIO for the augmented system, a reduced-order FDO is constructed to estimate an augmented state vector that consists of both the original state variables and the augmentative state variables. The estimated state is then used to generate the residual, which should be designed to be insensitive to unknown inputs while being sensitive to the faults of interest. Two numerical examples are provided to show the usefulness and the feasibility of the presented approach.     

Fault‐Tolerant Control Allocation for Overactuated Nonlinear Systems

This paper addresses the problem of fault‐tolerant control allocation for input affine nonlinear systems. The proposed scheme is divided in three main tasks: fault detection and estimation using a nonlinear observer, fault isolation through a bank of unknown input observers with a resetting policy to reduce the effects of nonlinearities and control reconfiguration based on reduced order allocation. Analytical results regarding the isolability and reconfigurability of actuator faults are derived and a simulation example is used to illustrate the the proposed fault tolerant control methodology.     

模糊非线性奇偶方程故障诊断方法

研究基于模糊模型和奇偶(一致性)方程的非线性系统执行器故障诊断方法.讨论了全 解耦奇偶方程的产生方法,并给出了全解耦奇偶向量存在的条件.由全解耦奇偶方程产生的残 差仅对特定执行器故障敏感,而与系统状态、扰动输入和其它执行器输入无关.用T-S模糊模型 描述非线性系统,并与全解耦奇偶方程相结合得到了模糊奇偶方程,解决了奇偶方程在非线性 系统中的应用问题.将执行器故障模型用刻度因子和偏差表示,用模糊奇偶方程产生残差,从而 可以估计故障模型的参数.文章给出了某飞机非线性模型的仿真实例.     

基于区间观测器的执行器故障检测

针对同时具有未知非线性函数(包括系统不确定性、外部干扰等) 和执行器故障的非线性系统, 提出基于区间观测器的故障检测方法. 首先, 在假定执行器故障不出现的前提下, 基于未知非线性函数的上下界信息, 提出两种区间观测器设计方法; 然后, 利用这两种区间观测器的输出和系统的真实输出, 构造可以对执行器故障进行检测的残差, 以此实现基于区间观测器的执行器故障检测. 最后, 通过两个仿真例子验证了所提出方法的正确性和有效性.

     

Fault tolerant control using virtual actuator for continuous‐time Lipschitz nonlinear systems

In this brief, we extend the existing results on fault tolerant control via virtual actuator approach to a class of systems with Lipschitz nonlinearities to maintain the closed‐loop stability after actuator faults. This generalization is established by relying on the input‐to‐state stability properties of cascaded systems. The virtual actuator block, placed between faulty plant and nominal controller, generates useful input signals for faulty plant by using output signals of the nominal controller to guarantee the closed‐loop stability in the presence of actuator faults. This design problem is reduced to a matrix inequality that can be turned to an LMI by fixing a variable to a constant value and solving the resulting LMI feasibility problem. The proposed fault tolerant control method is successfully evaluated using a nonlinear system. Copyright © 2013 John Wiley & Sons, Ltd.     

Adaptive decentralized fault‐tolerant tracking control for large‐scale nonlinear systems with input quantization

In this paper, an adaptive decentralized tracking control scheme is designed for large‐scale nonlinear systems with input quantization, actuator faults, and external disturbance. The nonlinearities, time‐varying actuator faults, and disturbance are assumed to exist unknown upper and lower bounds. Then, an adaptive decentralized fault‐tolerant tracking control method is designed without using backstepping technique and neural networks. In the proposed control scheme, adaptive mechanisms are used to compensate the effects of unknown nonlinearities, input quantization, actuator faults, and disturbance. The designed adaptive control strategy can guarantee that all the signals of each subsystem are bounded and the tracking errors of all subsystems converge asymptotically to zero. Finally, simulation results are provided to illustrate the effectiveness of the designed approach.     

Robust fault diagnosis scheme in a class of nonlinear system based on UIO and fuzzy residual

In this study, a novel robust fault diagnosis scheme is developed for a class of nonlinear systems when both fault and disturbance are considered. The proposed scheme includes both component and sensor fault with nonlinear system that transferred to nonlinear Takagi-Sugeno (T-S) model. It considers a larger category of nonlinear system when fuzzification is used for only nonlinear distribution matrices. In fact the proposed method covers nonlinear systems could not transform to linear T-S model. This paper studies the problem of robust fault diagnosis based on two fuzzy nonlinear observers, the first one is a fuzzy nonlinear unknown input observer (FNUIO) and the other is a fuzzy nonlinear Luenberger observer (FNLO). This approach decouples the faulty subsystem from the rest of the system through a series of transformations. Then, the objective is to design FNUIO to guarantee the asymptotic stability of the error dynamic using the Lyapunov method; meanwhile, FNLO is designed for faulty subsystem to generate fuzzy residual signal based on a quadratic Lyapunov function and some matrices inequality convexification techniques. FNUIO affects only the fault free subsystem and completely removes any unknown inputs such as disturbances when residual signal is generated by FNLO is affected by component or sensor fault. This novelty and using nonlinear system in T-S model make the proposed method extremely effective from last decade literature. Sufficient conditions are established in order to guarantee the convergence of the state estimation error. Thus, a residual generator is determined on the basis of LMI conditions such that the estimation error is completely sensitive to fault vector and insensitive to the unknown inputs. Finally, an numerical example is given to show the highly effectiveness of the proposed fault diagnosis scheme.     

A bounded-error approach to simultaneous state and actuator fault estimation for a class of nonlinear systems

This paper proposes an approach for the joint state and fault estimation for a class of uncertain nonlinear systems with simultaneous unknown input and actuator faults. This is achieved by designing an unknown input observer combined with a set-membership estimation in the presence of disturbances and measurement noise. The observer is designed using quadratic boundedness approach that is used to overbound the estimation error. Sufficient conditions for the existence and stability of the proposed state and actuator fault estimator are expressed in the form of linear matrix inequalities (LMIs). Simulation results for a quadruple-tank system show the effectiveness of the proposed approach.     

Fault detection for output feedback control systems with actuator stuck faults: A steady‐state‐based approach

The paper studies the fault detection problem for output feedback control systems with bounded disturbances and nonzero constant reference inputs. A steady‐state‐based approach is proposed which can be used to detect small actuator stuck faults including actuator outage (the stuck value is zero). These small stuck faults, especially the outage faults, cannot be detected effectively using the existing techniques. A dynamic output feedback controller and a weighting matrix are designed simultaneously. The dynamic output feedback controller stabilizes the closed‐loop system for both fault‐free and faulty cases and attenuates the effects of disturbances. By manipulating the steady‐state values of system states with the detection weighting matrix, a residual is then generated, through which actuator stuck faults including actuator outages can be detected effectively. Simulation results are included to demonstrate our design procedure. Copyright © 2009 John Wiley & Sons, Ltd.     

Observer-based fuzzy adaptive fault control for a class of MIMO nonlinear systems

In this paper, the fault-tolerant control (FTC) problem is investigated for a class of multi-input multiple output nonlinear systems with time-varying delays, and an active FTC method is proposed. The controlled system contains unknown nonlinear functions, unknown control gain functions and actuator faults, which integrates time-varying bias and gain faults. Then, fuzzy logic systems are used to approximate the unknown nonlinear functions and unknown control gain functions, fuzzy adaptive observers are used for fault detection and isolation. Further, based on the obtained information, an accommodation method is proposed for compensating the actuator faults. It is shown that all the variables of the closed-loop system are semi-globally uniformly bounded, the tracking error converges to an arbitrary small neighbourhood of the origin. A simulation is given to demonstrate the effectiveness of the proposed approach.