Corrosion behavior of ferritic stainless steel with 15wt% chromium for the automobile exhaust system

The effect of chloride ion concentration, pH value, and grain size on the pitting corrosion resistance of a new ferritic stainless steel with 15wt% Cr was investigated using the anodic polarization method. The semiconducting properties of passive films with different chloride ion concentrations were performed using capacitance measurement and Mott-Schottky analysis methods. The aging precipitation and intergranular corrosion behavior were evaluated at 400- 900℃. It is found that the pitting potential decreases when the grain size increases. With the increase in chloride ion concentration, the doping density and the flat-bland potential increase but the thickness of the space charge layer decreases. The pitting corrosion resistance increases rapidly with the decrease in pH value. Precipitants is identified as Nb（C,N） and NbC, rather than Cr-carbide. The intergranular corrosion is attributed to the synergistic effects of Nb（C,N） and NbC precipitates and Cr segregation adjacent to the precipitates.     

Recent developments on applications of sequential loop closing and diagonal dominance control schemes to industrial multivariable system

With a focus on an industrial multivariable system, two subsystems including the flow and the level outputs are analysed and controlled, which have applicability in both real and academic environments. In such a case, at first, each subsystem is distinctively represented by its model, since the outcomes point out that the chosen models have the same behavior as corresponding ones. Then, the industrial multivariable system and its presentation are achieved in line with the integration of these subsystems, since the interaction between them can not actually be ignored. To analyze the interaction presented, the Gershgorin bands need to be acquired, where the results are used to modify the system parameters to appropriate values. Subsequently, in the view of modeling results, the control concept in two different techniques including sequential loop closing control （SLCC） scheme and diagonal dominance control （DDC） schemes is proposed to implement on the system through the Profibus network, as long as the OPC （OLE for process control） server is utilized to communicate between the control schemes presented and the multivariable system. The real test scenarios are carried out and the corresponding outcomes in their present forms are acquired. In the same way, the proposed control schemes results are compared with each other, where the real consequences verify the validity of them in the field of the presented industrial multivariable system control.     

Dynamic response of cylindrical cavity to anti-plane impact load by using analytical approach简

The transient response of an unlimited cylindrical cavity buried in the infinite elastic soil subjected to an anti-plane impact load along the cavern axis direction was studied. Using Laplace transform combining with contour integral of the Laplace inverse transform specifically, the general analytical expressions of the soil displacement and stress are obtained in the time domain, respectively. And the numerical solutions of the problem computed by analytical expressions are presented. In the time domain, the dynamic responses of the infinite elastic soil are analyzed, and the calculation results are compared with those from numerical inversion proposed by Durbin and the static results. One observes good agreement between analytical and numerical inversion results, lending the further support to the method presented. Finally, some valuable shear wave propagation laws are gained： the displacement of the soil remains zero before the wave arrival, and after the shear wave arrival, the stress and the displacement at this point increase abruptly, then reduce and tend to the static value gradually at last. The wave attenuates along the radial, therefore the farther the wave is from the source, the smaller the stress and the displacement are, and the stress and the displacement are just functions of the radial distance from the axis.     

Biodegradable starch/poly （vinyl alcohol） film reinforced with tita- nium dioxide nanoparticles

Biodegradable starch/poly （vinyl alcohol）/nano-titanium dioxide （ST/PVA/nano-Ti02） nanocomposite films were prepared via a solution casting method. Their biodegradability, mechanical properties, and thermal properties were also studied in this paper. A general full factorial experimental approach was used to determine effective parameters on the mechanical properties of the prepared films. ST/PVA/TiO2 nanocomposites were characterized by scanning electron microscopy （SEM） and X-ray diffraction （XRD）. The results of mechanical analysis show that ST/PVA films with higher contents of PVA have much better mechanical properties. In thermal analysis, it is found that the addition of Ti02 nanoparticles improves the thermal stability of the films. SEM micrographs, taken from the fracture surface of samples, illustrate that the addition of PVA makes the film softer and more flexible. The results of soil burial biodegradation indicate that the biodegradability of ST/PVA/TiO2 films strongly depends on the starch proportion in the film matrix. The degradation rate is increased by the addition of starch in the films.     

Interfacial intermetallic compound growth and shear strength of low-silver SnAgCuBiNi//Cu lead-free solder joints

The growth rule of the interfacial intermetallic compound （IMC） and the degradation of shear strength of Sn-0.SAg-0.5Cu-2.0Bi-0.05Ni （SACBN）/Cu solder joints were investigated in comparison with Sn-3.0Ag-0.5Cu （SAC305）/ Cu solder joints aging at 373, 403, and 438 K. The results show that （Cul-x,Nix）6Sn5 phase forms between the SACBN solder and Cu substrate during soldering. The interracial IMC thickens constantly with the aging time increasing, and the higher the aging temperature, the faster the IMC layer grows. Compared with the SAC305/Cu couple, the SACBN/Cu couple exhibits a lower layer growth coefficient. The activation energies of IMC growth for SACBN/Cu and SAC305/Cu couples are 111.70 and 82.35 kJ/mol, respectively. In general, the shear strength of aged solder joints declines continuously. However, SACBN/Cu solder joints exhibit a better shear strength than SAC305/Cu solder joints.     

Effect analysis of friction and damping on anti-backlash gear based on dynamics model with time-varying mesh stiffness

A nonlinear model of anti-backlash gear with time-varying friction and mesh stiffness was proposed for the further study on dynamic characteristics of anti-backlash gear. In order to improve the model precision, applied force analysis was completed in detail, and single or double tooth meshing states of two gear pairs at any timing were determined according to the meshing characteristic of anti-backlash gear. The influences of friction and variations of damping ratio on dynamic transmission error were analyzed finally by numerical calculation and the results show that anti-backlash gear can increase the composite mesh stiffness comparing with the mesh stiffness of the normal gear pair. At the pitch points where the frictions change their signs, additional impulsive effects are observed. The width of impulsive in the same value of center frequency is wider than that without friction, and the amplitude is lower. When gear pairs mesh in and out, damping can reduce the vibration and impact.     

Nonlinear adaptive optimal control for vehicle handling improvement through steer-by-wire system简

A control algorithm for improving vehicle handling was proposed by applying right angle to the steering wheel, based on the nonlinear adaptive optimal control （NAOC）. A nonlinear 4-DOF model was initially developed, then it was simplified to a 2-DOF model with reasonable assumptions to design observer and optimal controllers. Then a simplified model was developed for steering system. The numerical simulations were carried out using vehicle parameters for standard maneuvers in dry and wet road conditions. Moreover, the hardware in the loop method was implemented to prove the controller ability in realistic conditions. Simulation results obviously show the effectiveness of NAOC on vehicle handling and reveal that the proposed controller can significantly improve vehicle handling during severe maneuvers.     

Numerical evaluation of buckling behavior in space structure considering geometrical parameters with joint rigidity简

The buckling behavior of single layer space structure is very sensitive. The joint rigidity, moreover, is one of the main factors of stability which may determine the entire failure behavior. Thus, the reasonable stiffness of joint system, which is neither total pin assumption nor perfect fix condition, is very important to apply to the real single layer space one. Therefore, the purpose of this work was to investigate the buckling behavior of single layer space structure, using the development of the upgraded stiffness matrix for the joint rigidity. To derive tangential stiffness matrix, a displacement function was assumed using translational and rotational displacement at the node. The geometrical nonlinear analysis was simulated not only with perfect model but also with imperfect one. As a result, the one and two free nodal numerical models were investigated using derived stiffness matrix. It was figured out that the buckling load increases in proportion to joint rigidity with rise-span ratio. The stability of numerical model is very sensitive with the initial imperfection, responding of bifurcation in the structure.     

Electrical and mechanical properties of vapour grown gallium monotelluride crystals

The physical vapour deposition （PVD） of gallium monotelluride （GaTe） in different crystalline habits was established in the growth ampoule, strongly depending on the temperature gradient. Proper control on the temperatures of source and growth zones in an indigenously fabricated dual zone furnace could yield the crystals in the form of whiskers and spherulites. Optical and electron microscopic images were examined to predict the growth mechanism of morphologies. The structural parameters of the grown spherulites were determined by X-ray powder diffraction （XRD）. The stoichiometric composition of these crystals was confirmed using energy dispersive analysis by X-rays （EDAX）. The type and nature of electrical conductivity were identified by the conventional hot probe and two probe methods, respectively. The mechanical parameters, such as Vickers microhardness, work hardening index, and yield strength, were deduced from microindentation measurements. The results show that the vapour grown p-GaTe crystals exhibit novel physical properties, which make them suitable for device applications.     

Thermodynamics and kinetics of alumina extraction from fly ash using an ammonium hydrogen sulfate roasting method

A novel method was developed for extracting alumina （Al2O3） from fly ash using an ammonium hydrogen sulfate （NH4HSO4） roasting process, and the thermodynamics and kinetics of this method were investigated. The thermodynamic results were verified experi-mentally. Thermodynamic calculations show that mullite present in the fly ash can react with NH4HSO4 in the 298-723 K range. Process op-timization reveals that the extraction rate can reach up to 90.95% when the fly ash reacts with NH4HSO4 at a 1：8 mole ratio of Al2O3/NH4HSO4 at 673 K for 60 min. Kinetic analysis indicates that the NH4HSO4 roasting process follows the shrinking unreacted core model, and inner diffusion through the product layer is the rate-controlling step. The activation energy is calculated to be 16.627 kJ/mol;and the kinetic equation can be expressed as 1-（2/3）α-（1-α）2/3=0.0374t exp[-16627/（RT）], whereαis the extraction rate and t is the roasting temperature.     

Preparation and visible-light photocatalytic property of nanostructu- red Fe-doped TiO2 from titanium containing electric furnace molten slag

Nanostructured Fe-doped titanium dioxide was synthesized from titanium containing electric furnace molten slag （TCEFMS） by using an alkali fusion, followed by a hydrolyzation-acidolysis-cMcination route. The effects of Mkali/slag mass ratio, calcinating temperature, calcinating time, and water/slag mass ratio on the extraction efficiency and purity of products were systematically studied in this paper. It is indicated that the best extraction efficiency of nanostructured Fe- doped titanium dioxide is 99.35%, when the molten slag is calcinated at 700℃ for 1 h with the mass ratio of alkali/molten slag of 1.5：1. The influence of alkali/slag mass ratio on the photocatalytic activity of final products was evaluated by the photodegradation of methyl blue under visible light irradiation. A maximum photodegradation efficiency of 88.12% over 30 min was achieved under the optimum conditions.     

Biodesulfurization of vanadium-bearing titanomagnetite concentrates and pH control of bioleaching solution

Vanadium-bearing titanomagnetite concentrates were desulfurized with Acidithiobacillus ferrooxidans （A. ferrooxidans）. The sulfur content of the concentrates was reduced from 0.69wt% to 0.14wt% after bioleaching for 15 d with a 10% pulp density at 30℃. Maintaining a stable pH value during biodesulfurization was critical because of high acid consumption, resulting from a combination of nonoxidative and oxidative dissolution of pyrrhotite in acid solution. It is discovered that the citric acid-disodium hydrogen phosphate buffer of pH 2.0 can control the solution pH value smoothly in the optimal range of 2.0-3.0 for A. ferrooxidans growth. Using the buffer in the volume fraction range of 5.0%-15.0% stimulates A. ferooxidans growth and improves the biodesulfurization efficiency. Compared with the buffer-free control case, the maximum increase of biodesulfurization rate is 29.7% using a 10.0vol% buffer. Bioleaching provides an alternative process for desulfurization of vanadium-bearing titanomagnetite ores.     

Martensitic transformation and magnetic properties of aged Ni-Fe-Ga-Ti shape memory alloy

This article reports the effect of ageing on the microstructure, martensitic transformation, magnetic properties, and mechanical properties of Ni51FelsGa27Ti4 shape memory alloy. There are five specimens of this alloy aged at 573 up to 973 K for 3 h per each. This range of ageing temperature greatly affects the microstructure of the alloy. As the ageing temperature increased from 573 up to 973 K, the microstructure of Ni51FelsGa27Ti4 alloy gradually changed from the entirely martensitic matrix at 573 K to the fully austenitic microstructure at 973 K. The volume fraction of precipi- tated Ni3Ti particles increased with the ageing temperature increasing from 573 to 773 K. Further increasing the ageing temperature to 973 K decreased the content of Ni3Ti in the microstructure. The martensitic transformation tempera- ture was decreased steadily by increasing the ageing temperature. The magnetization saturation, remnant magnetization, and coercivity increased with the ageing temperature increasing up to 773 K. A further increase in ageing temperature decreased these raagnetic properties. Moreover, the hardness values were gradually increased at first by increasing the ageing temperature to 773 K, and then dramatically decreased to the lowest value at 973 K.     

Microstructural and mechanical properties of A1-4.5wt% Cu rein- forced with alumina nanoparticles by stir casting method

The microstructure and mechanical properties of A1-4.5wt% Cu Mloy reinforced with different volume fractions （1.5vo1%, 3vo1%, and 5vo1%） of alumina nanoparticles, fabricated using stir casting method, were investigated. CMculated amounts of alumina nanoparticles （about ~50 nm in size） were ball-milled with aluminum powders in a planetary ball mill for 5 h, and then the packets of milled powders were incorporated into molten Al-4.5wt% Cu alloy. Microstructural studies of the nanocomposites reveal a uniform distribution of alumina nanoparticles in the A1-4.5wt% Cu matrix. The results indicate an outstanding improvement in compression strength and hardness due to the effect of nanoparticle addition. The aging behavior of the composite is also evaluated, indicating that the addition of alumina nanoparticles can accelerate the aging process of the Mloy, resulting in higher peak hardness values.     

Matched glass-to-Kovar seals in N2 and Ar atmospheres

The oxidation of Kovar alloy was investigated, the wetting and spreading behavior of hard and soft glasses on Kovar alloy were studed by using the sessile drop method, and the quality and the seal strength of glass-Kovar seals were tested. The experimental results indicated that the preoxidation of Kovar alloy for approximately 10 min at 700℃ in air resulted in excellent adherence in glass-Kovar seals. The wetting and spreading behavior of glass on preoxidized Kovar alloy were superior to that on nonoxidized Kovar alloy. The wetting ability of ASF110 glass, at 950℃ and 980℃ in Ar and N2 atmospheres, was significantly superior to that of ASF200R and ASF700 glasses. The seal quality of the glass-preoxidized Kovar seal was superior to that of the glass-nonoxidized Kovar seal. The shear strength of the ASFll0 glass-preoxidized Kovar seal, which was prepared at 980℃ for 20 min in an Ar atmosphere, was approximately 3.9 MPa.     

Coarsening behavior of γ′ and γ″ phases in GH4169 superalloy by electric field treatment

The coarsening behaviors of γ′ and γ″ phases in GH4169 alloy aged at 1023 and 1073 K with electric field treatment （EFT） were investigated by transmission electron microscopy （TEM） and positron annihilation lifetime spectroscopy （PALS）. It is demonstrated that precipitation coarsening occurs, and the growth activation energies of γ′ and γ″phases can be decreased to 115.6 and 198.1 kJ.mo1-1, respectively, by applying the electric field. The formation of a large number of vacancies in the matrix is induced by EFT. Due to the occurrence of vacancy migration, the diffusion coefficients of A1 and Nb atoms are increased to be 1.6-5.0 times larger than those without EFT at 1023 or 1073 K. Furthermore, the formation of vacancy clusters is promoted by EFT, and the increase in strain energy for the coarsening of γ′ and γ″ phases can be counterbalanced by the formation of vacancy clusters.     

Integrated evaluation system under randomness and fuzziness for groundwater contamination risk assessment in a little town,Central China简

An integrated evaluation system under randomness and fuzziness was developed in this work to systematically assess the risk of groundwater contamination in a little town, Central China. In this system, randomness of the parameters and the fuzziness of the risk were considered simultaneously, and the exceeding standard probability of contamination and human health risk due to the contamination were integrated. The contamination risk was defined as a combination of ＂vulnerability＂ and ＂hazard＂. To calculate the value of ＂vulnerability＂, pollutant concentration was simulated by MODFLOW with random input variables and a new modified health risk assessment （MRA） model was established to analyze the level of ＂hazard＂. The limit concentration based on environmental-guideline and health risk due to manganese were systematically examined to obtain the general risk levels through a fuzzy rule base. The ＂vulnerability＂ and ＂hazard＂ were divided into five categories of ＂high＂, ＂medium-high＂, ＂medium＂, ＂low-medium＂ and ＂low＂, respectively. Then, ＂vulnerability＂ and ＂hazard＂ were firstly combined by integrated evaluation. Compared with the other two scenarios under deterministic methods, the risk obtained in the proposed system is higher. This research illustrated that ignoring of uncertainties in evaluation process might underestimate the risk level.     

Physically based analytical model for plateau in gate C-V characteristics of strained silicon pMOSFET

A physically based analytical model was developed to predict the performance of the plateau observed in the gate C-V characteristics of strained-Si/SiGe pMOSFET.Experimental results were used to validate this model.The extracted parameters from our model were tox=20 nm,ND=1×1016 cm-3,tssi=13.2 nm,consistent with the experimental values.The results show that the simulation results agree with experimental data well.It is found that the plateau can be strongly affected by doping concentration,strained-Si layer thickness and mass fraction of Ge in the SiGe layer.The model has been implemented in the software for strained silicon MOSFET parameter extraction,and has great value in the design of the strained-Si/SiGe devices.     

Optimization of process parameters to maximize ultimate tensile strength of friction stir welded dissimilar aluminum alloys using response surface methodology

Aluminium alloys generally present low weldability by traditional fusion welding process. Development of the friction stir welding （FSW） has provided an alternative improved way of producing aluminium joints in a faster and reliable manner. The quality of a weld joint is stalwartly influenced by process parameter used during welding. An approach to develop a mathematical model was studied for predicting and optimizing the process parameters of dissimilar aluminum alloy （AA6351 T6-AA5083 Hlll）joints by incorporating the FSW process parameters such as tool pin profile, tool rotational speed welding speed and axial force. The effects of the FSW process parameters on the ultimate tensile strength （UTS） of friction welded dissimilar joints were discussed. Optimization was carried out to maximize the UTS using response surface methodology （RSM） and the identified optimum FSW welding parameters were reported.     

Preparation of CaO-Al2O3-SiO2 system glass from molten blast furnace slag

To use the potential heat of molten blast furnace slag completely, a CaO-Al2O3-SiO2 system glass （MSG） was prepared from the molten industrial slag. The corresponding method proposed in this study utilized both slag and its potential heat, improving the production rate and avoiding the environmental pollution. Using appropriate techniques, an MSG with uniform color and superior performances was produced. Based on the experimental results and phase diagram, the chemical composition of MSG by mass is obtained as follows：CaO 27%-33%, SiO2 42%-51%, Al2O3 11%-14%, MgO 6%-8%, and Na2O＋K2O 1%-4%. Thermodynamic processes of MSG preparation were analyzed, and the phases and microstructures of MSG were investigated by X-ray diffraction （XRD） and scanning electron microscopy （SEM）. The results show that alkali metal oxides serve as the fluxes, calcium oxide serves as the stabilizer, and alumina reinforces the Si-O network. XRD and SEM analyses show that, the prepared MSG displays the glass-feature patterns, the melting process is more complete, and the melt viscosity is lowered with an increase in calcium oxide content;however, a continuous increase in slag content induces the crystalli-zation of glass, leading to the formation of glass subphase. The optimum content of molten slag in MSG is 67.37wt%. With respect to bend-ing strength and acid/alkali resistance, the performance of MSG is better than that of ordinary marble.