Research advances of un-symmetric constitutive theory of anisotropic viscoelastic liquids and its hydrodynamic behavior

Research advances of un-symmetric constitutive equation of anisotropic fluid,influence of un-symmetric stress tensor on material functions,vibrational shear flow of the fluid with small amplitudes and rheology of anisotropic suspension were reported.A new concept of simple anisotropic fluid was introduced.On the basis of anisotropic principle,the simple fluid stress behaviour was described by velocity gradient tensor F and spin tensor W instead of velocity gradient tensor D in the classic Leslie-Ericksen continuum theory.Two relaxation times analyzing rheological nature of the fluid and using tensor analysis a general form of the constitutive equation of co-rotational type was introduced.More general model LCP-H for the fluid was developed.The unsymmetry of the shear stress was predicted by the present continuum theory for anisotropic viscoelastic fluid-LC polymer liquids.The influence of the relaxation times on material functions was specially studied.It is important to study the unsteady vibrational rotating flow with small amplitudes,as it is a best way to obtain knowledge of elasticity of the LC polymer,i.e.dynamic viscoelasticity.For the shear-unsymmetric stresses,two shear stresses were obtained thus two complex viscosities and two complex shear modulus(i.e.first and second one) were introduced by the constitutive equation which was defined by rotating shear rate introduced by author.For the two stability problems of fluid,such as stability of hydrodynamic flow and orientational motion,were discussed.The results show that the polymer suspension systems exhibit anisotropic character.The PNC systems can exhibit significant shear-thinning effects.For more concentrated polymer nano-suspensions,the first normal stress difference change from positive to negative,which is similar to LC polymer behavior.     

当前民办高校融资难的成因及对策

针对民办高校所需办学经费无国家财政拨款,全部为自筹资金的现状,分析了形成当前民办高校融资难的原因,既有信贷政策、银行方面的因素,也有民办高校自身的因素.提出民办高校要生存,要发展,光靠举办者投入或捐赠以及每年的学费收入是不够的,还需要积极拓展更多融资渠道解决办校融资难的问题.     

脉冲振动预磁器的研究和设计

根据细粒磁性物回收工艺中需要使用预磁器的要求,研究预磁器的工作时序、充放电回路的电器元件特性和电路电压、电流特征.设计的电磁预磁器磁场强度高,能耗低,性价比高.对预磁化电路展开理论计算和推导.首次提出脉冲振动预磁器系统结构,将RLC电路振荡波形转变为振动波形,形成"脉振"高场强,延长了线圈的使用寿命.经实际运行检验,该装置性能稳定,效果好,能耗低,每小时耗电仅0.8 kW,在预磁器领域是一项创新的实用技术.     

城市污水热能资源化的基础研究

作为城市污水热能资源化的基础研究,根据理论分析方法,对有效利用城市污水所赋存的热能时,其节能效果和对减轻大气污染的作用进行了若干分析和探讨.分别计算了流量为1 m3/s时城市污水赋存的热量,以及采暖面积为1万m2时所需的城市污水及赋存的热量,与空调、锅炉相比产生相同热量时的一次能和二次能的消减量,以及相应条件下的污染物年间(采暖期)消减量等.     

Vibrational shear flow of anisotropic viscoelastic fluid with small amplitudes

Using the constitutive equation of co-rotational derivative type for anisotropic viscoelastic fluid-liquid crystalline(LC),polymer liquids was developed.Two relaxation times are introduced in the equation:λn represents relaxation of the normal-symmetric stress components;λs represents relaxation of the shear-unsymmetric stress components.A vibrational rotating flow in gap between cylinders with small amplitudes is studied for the anisotropic viscoelastic fluid-liquid crystalline polymer.The time-dependent constitutive equation are linearized with respect to parameter of small amplitude.For the normal-symmetric part of stress tensor analytical expression of the shear stress is obtained by the constitutive equation.The complex viscosity,complex shear modulus,dynamic and imaginary viscosities,storage modulus and loss modulus are obtained for the normal-symmetric stress case which are defined by the common shear rate.For the shear-unsymmetric stress part,two shear stresses are obtained thus two complex viscosities and two complex shear modulus(i.e.first and second one) are given by the constitutive equation which are defined by rotating shear rate introduced by author.The dynamic and imaginary viscosities,storage modulus and loss modulus are given for each complex viscosities and complex shear modulus.Using the constituive equation the rotating flow with small amplitudes in gap between two coaxial cylinders is studied.     

科技期刊版式设计略谈

对科技期刊版式设计中的标题、插图与空白的处置进行了分析探讨,认为科技期刊版式设计在总体上应是追求格式一致与节奏变化的统一,整体性与连贯性的统一.布局合理的版式设计带给期刊的是整体的和谐美,别具风格的版式设计标志着期刊的个性特征.     

利用双折射晶体实现双偏振光叠加的教学研究

利用晶体的双折射现象和它的基本性质,采用现代光纤和CCD摄像放大技术手段研究了双偏振光的叠加和干涉现象,讨论了学生在教学中不易理解的难点问题.     

玉米中转基因成分的定性PCR检测

利用改良 CTAB 法提取玉米产品的基因组 DNA,应用 PCR 检测方法,并以玉米特异性内源基因 IVR 为内参,花椰菜花叶病毒 35S 启动子(CaMV35S 启动子)、农杆茵胭脂碱合成酶终止子(NOS终止子)为靶基因检测玉米中是否存在转基因成分.实验结果表明,有些玉米样品中存在转基因成分,表明市场上存在未经标识的转基因玉米及其加工品.     

单极世界军备竞赛微分方程稳定性的研究

对一国或多国军备竞赛的数学模型进行了研究.单独一国的经济增长服从Horrod-Domer模型,但当多国一起竞争时,弱国将遭受前所未有的严重挑战.通过研究超级大国、另一大国和弱国这三个国家之间军备竞赛稳定性问题,得到了军备竞赛稳定性的条件.     

Effect of sediment on vertical dynamic impedance of rock-socketed pile with large diameter

Based on the fictitious soil pile model, the effect of sediment on the vertical dynamic impedance of rock-socketed pile with large diameter was theoretically studied by means of Laplace transform technique and impedance function transfer method. Firstly, the sediment under rock-socketed pile was assumed to be fictitious soil pile with the same sectional area. The Rayleigh-Love rode model was used to simulate the rock-socketed pile and the fictitious soil pile with the consideration of the lateral inertial effect of large-diameter pile. The layered surrounding soils and bedrock were modeled by the plane strain model. Then, by virtue of the initial conditions and boundary conditions of the soil pile system, the analytical solution of the vertical dynamic impedance at the head of rock-socketed pile was derived for the arbitrary excitation acting on the pile head. Lastly, based on the presented analytical solution, the effect of sediment properties, bedrock property and lateral inertial effect on the vertical dynamic impedance at rock-socketed pile head were investigated in detail. It is shown that the sediment properties have significant effect on the vertical dynamic impedance at the rock-socketed pile head. The ability of soil-pile system to resist dynamic vertical deformation is weakened with the increase of sediment thickness, but amplified with the increase of shear wave velocity of sediment. The ability of soil pile system to resist dynamic vertical deformation is amplified with the bedrock property improving, but the ability of soil-pile system to resist vertical vibration is weakened with the improvement of bedrock property.     

Modification of LiCo1/3Ni1/3Mn1/3O2 cathode material by CeO2-coating

LiCo_1/3Ni_1/3Mn_1/3O₂ was coated by a layer of 1.0 wt% CeO₂ via sol-gel method. The bared and coated LiMn_1/3Co_1/3Ni_1/3O₂ was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), cyclic voltammogram (CV) and galvanotactic charge-discharge test. The results show that the coating layer has no effect on the crystal structure, only coating on the surface; the 1.0 wt% CeO₂-coated LiCo_1/3Ni_1/3Mn_1/3O₂ exhibits better discharge capacity and cycling performance than the bared LiCo_1/3Ni_1/3Mn_1/3O₂. The discharge capacity of 1.0 wt% CeO₂-coated cathode is 182.5 mAh·g⁻¹ at a current density of 20 mA·g⁻¹, in contrast to 165.8 mAh·g⁻¹of the bared sample. The discharge capacity retention of 1.0 wt% CeO₂-coated sample after 12 cycles reaches 93.2%, in comparison with 86.6% of the bared sample. CV results show that the CeO₂ coating could suppress phase transitions and prevent the surface of cathode material from direct contact with the electrolyte, thus enhance the electrochemical performance of the coated material.     

Effect of catalyst on structure of （PEO）8LiClO4-SiO2 composite polymer electrolyte films

（PEO）8LiClO4-SiO2 composite polymer electrolytes（CPEs） were prepared by in-situ reaction, in which ethyl-orthosilicate （TEOS） was catalyzed by HCl and NH3·H2O, respectively. The ionic conductivity, the contact angle and the morphology of inorganic particles in the CPEs were investigated by AC impedance spectra, contact angle method and TEM. The conductivities of acid-catalyzed CPE and alkali-catalyzed CPE are 2.2×10^-5 and 1.1×10^-5 S/cm respectively at 30 ℃. The results imply that the catalyst plays an important role in the structure of in-situ preparation of SiO2, and influences the surface energy and conductivity of CPE films directly. Meanwhile, the ionic conductivity is related to the surface energy.     

Kinetics of Fe3O4 formation by air oxidation

The kinetics of Fe₃O₄ formation by air oxidation of slightly acidic suspension of Fe(OH)₂ was studied. The effects of initial concentration of Fe(II), temperature, partial pressure of oxygen, air flow rate and stirring rate on the oxidation rate were investigated. The results show that Fe₃O₄ formation is composed of two-step reaction, the first step is the formation of Fe(OH) ₂ ⁺ by oxidation of Fe(OH)⁺ complex ions, the second step is the formation of magnetite by dehydration and deprotonation of Fe(OH)⁺ and Fe(OH) ₂ ⁺ . The oxidation reaction is zero-order with respect to the concentration of Fe(II) and around 0.5-order with respect to partial pressure of oxygen, and oxygen transfer process is rate-limiting step of oxidation reaction with apparent activation energy of 2.74 kJ · mol⁻¹.     

Cu2O/Cu2S 复合材料制备及可见光催化降解甲基橙的研究

通过水热法制备Cu₂O/Cu₂S 复合材料对甲基橙(MO) 进行光催化降解实验。在Cu₂O 中引入S 元素, 通过 改变Cu/S 投加摩尔比, 从而得到不同Cu/S 的复合材料。利用XRD、SEM、UV-vis、EIS 等手段对材料进行表征, 并 对MO 进行光催化降解实验。XRD 结果表明, 随着S 含量的增多, Cu₂S 的衍射强度逐渐上升, Cu₂O 的f111g 晶面 衍射强度逐渐降低。SEM 结果表明Cu₂S 能较好地包覆在Cu₂O 八面体的表面。通过UV-vis 和EIS 结果计算得知, 复合材料带隙为1.49 eV, 电荷转移电阻大幅降低。降解实验结果表明复合材料最佳Cu/S 投加摩尔比为15 : 1, 其在 100 min 时对MO (100 mL, 10 mg/L) 降解率达到91.4%, 明显高于纯Cu₂O 对于MO 的降解率(60.3%)。猝灭实验表 明了?OH 和 ?O₂ ^-在光催化过程中起到主要作用。     

球形LiMn1.5Ni0.5O4材料的嵌脱动力学

为明晰Li Mn1.5Ni0.5O4正极材料的动力学性能,采用水热辅助共沉淀法合成了尖晶石Li Mn1.5Ni0.5O4正极材料,并采用扫描电镜(SEM)、X射线粉末衍射(XRD)和电化学阻抗(EIS)研究了材料的结构和锂离子嵌脱动力学.实验结果表明:共沉淀法制备的Li Ni0.5Mn1.5O4材料颗粒呈均匀球形,且平均粒径较小,粒度分布较窄.在循环过程中,Li Ni0.5Mn1.5O4的电荷转移电阻增大,锂离子扩散系数减小,进而电子电导率和离子电导率下降.温度升高后,Li Ni0.5Mn1.5O4材料的溶液电阻变化不大,但是电荷转移电阻逐渐增大,锂离子扩散系数逐渐减小;此外,随着温度的升高,Li Ni0.5Mn1.5O4材料的溶解速度加快,从而导致SEI膜的厚度增大.Li Ni0.5Mn1.5O4材料的嵌脱锂动力学与温度和循环次数有密切关系.     

Al_2O_3包覆对富锂锰基正极材料Li_(1.2)Mn_(0.54)Co_(0.13)Ni_(0.13)O_2的电化学性能影响

采用水热法合成富锂三元正极材料,探究了最佳包覆比例下Al_2O_3包覆对材料的电化学性能影响.采用扫描电镜(SEM)和X射线衍射仪(XRD)表征了富锂三元正极材料的表面形貌和结构,通过循环伏安(CV)、交流阻抗(EIS)技术分析了材料电化学性的影响因素.结果表明,通过异丙醇铝水解制得了氧化铝包覆层,提高了材料的比容量,稳定了材料的结构.     

Preparation and characterization of poly（lithium acrylate-arcylonitrile）／ LiClO4-LiNO3-LiBr solid polymer electrolytes

Through orthogonal experiment, a new type of LiClO₄-LiNO₃-LiBr eutectic salt with optimum mole ratio of n(LiClO₄):n(LiNO₃):n(LiBr) = 1.6:3.8:1.0 was prepared. The poly(lithium acrylate-acrylonitrile)/LiClO₄-LiNO₃-LiBr solid polymer electrolytes were prepared with poly (lithium acrylate-acrylonitrile) and LiClO₄-LiNO₃-LiBr eutectic salts. The effect of LiClO₄-LiNO₃-LiBr eutectic salts content on the conductivity of solid polymer electrolytes was studied by alternating current impedance method, and the structures of eutectic salts and solid polymer electrolytes were characterized by differential thermal analysis, infrared spectroscopy and X-ray diffractometry. The results show that the room temperature conductivity of LiClO₄-LiNO₃-LiBr eutectic salts reaches 3.11×10⁻⁴ S · cm⁻¹. The poly (lithium acrylate-acrylonitrile)/LiClO₄-LiNO₃-LiBr solid polymer electrolytes possess the highest room temperature conductivity at 70% LiClO₄-LiNO₃-LiBr eutectic salts content, and exhibit lower glass transition temperature of 75 °C compared with that of poly(lithium acrylate-acrylonitrile) of 105 °C. A complex may be formed in the solid polymer electrolytes from the differential thermal analysis and infrared spectroscopy analysis. X-ray diffraction results show that the poly(lithium acrylate-acrylonitrile) can suppress the crystallization of eutectic salts in this system.     

Synthesis and characterization of Mg3(PO4)2-coated Li1.05Ni1/3Mn1/3Co1/3O2 cathode material for Li-ion battery

Mg₃(PO₄)₂-coated Li_1.05Ni_1/3Mn_1/3Co_1/3O₂ cathode materials were synthesized via co-precipitation method. The morphology, structure, electrochemical performance and thermal stability were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), cyclic voltammetry(CV), electrochemical impedance spectroscopy(EIS), charge/discharge cycling and differential scanning calorimeter (DSC). SEM analysis shows that Mg₃(PO₄)₂-coating changes the morphologies of their particles and increases the grains size. XRD and CV results show that Mg₃(PO₄)₂-coating powder is homogeneous and has better layered structure than the bare one. Mg₃(PO₄)₂-coating improved high rate discharge capacity and cycle-life performance. The reason why the cycling performance of Mg₃(PO₄)₂-coated sample at 55 °C was better than that of room temperature was the increasing of lithium-ion diffusion rate and charge transfer rate with temperature rising. Mg₃(PO₄)₂-coating improved the cathode thermal stability, and the result was consistent with thermal abuse tests using Li-ion cells: the Mg₃(PO₄)₂ coated Li_1.05Ni_1/3Mn_1/3Co_1/3O₂ cathode did not exhibit thermal runaway with smoke and explosion, in contrast to the cells containing the bare Li_1.05Ni_1/3Mn_1/3Co_1/3O₂. Funded by the National Natural Science Foundation of China (No. 20273047)     

一步固相法制备高性能Li_2MnSiO_4/C锂离子电池正极材料

采用一步固相法合成了Li_2MnSiO_4/C正极材料,利用XRD,EIS和循环伏安测试对该材料进行了结构和电化学性能表征.研究了一步固相法中添加不同比例的葡萄糖对Li_2MnSiO_4材料性能的影响.结果表明:葡萄糖作碳源复合可以提高Li_2MnSiO_4正极材料的充放电比容量和循环性能,同时在一步固相合成法中还能细化Li_2MnSiO_4正极材料颗粒.葡萄糖添加量为6%时,制备得到的Li_2MnSiO_4/C正极材料首次可逆放电比容量为213.1 mAh/g.     

Study on the isothermal oxidation behavior in air of Ti3AlC2 sintered by hot pressing

The isothermal oxidation behavior at 900–1300°C for 20 h in air of bulk Ti₃AlC₂ with 2.8 wt% TiC sintered by means of hot pressing was investigated in the work. The isothermal oxidation behavior generally followed a parabolic rate law. The parabolic rate constants increased from 1.39×10⁻¹⁰ kg²·m⁻⁴·s⁻¹ at 900°C to 5.56×10⁻⁹ kg²·m⁻⁴·s⁻¹ at 1300°C. The calculated activation energy was 136.45 kJ/mol. It was demonstrated that Ti₃AlC₂ had excellent oxidation resistance due to the continuous, dense and adhesive protect scales consisted of a mass of α-Al₂O₃ and a little of TiO₂ and/or Al₂TiO₅. In principle, the oxide scale was grown by the inward diffusion of O²⁻ and the outward diffusion of Ti⁴⁺ and Al³⁺. The rapid outward diffusion of cations usually resulted in the formation of cracks, gaps, and holes.