Enhanced upconversion study of Er3+-Yb3+ codoped NaYF4 phosphors synthesized by the reverse microemulsion method

Herein, nanocrystals of Er³⁺ and Er³⁺, Yb³⁺ co-doped NaYF₄ upconversion (UC) phosphor were prepared via the reverse-microemulsion method. The impact of different concentrations of Er³⁺ ions on the UC emission intensity after 980?nm diode laser excitation is discussed. The structure, morphology and composition of the nanophosphors were confirmed by X-ray diffraction, transmission electron microscopy, scanning electron microscopy and the results showed the presence of NaYF₄ nanocrystals with hexagonal phases of NaYF₄. The UC spectra revealed two emission bands including a green and a red emission band and the CIE coordinate for the samples were estimated. The present research revealed that the reverse-microemulsion approach will be suitable for the synthesis of efficient upconversion nanophosphors.     

Deep red upconversion photoluminescence in Er3+-doped Yb3Ga5O12 nanocrystalline garnet

The nanocrystalline single-phase Er³⁺-doped Yb₃Ga₅O₁₂ garnets have been prepared by the sol-gel combustion technique with a crystallite size of ≈30 nm. The presence of Yb³⁺ in garnet hosts allows their efficient excitation at the ≈977 nm wavelength. The Er³⁺ doping of Yb₃Ga₅O₁₂ garnet host results in deep red Er³⁺: ⁴F_9/2 → ⁴I_15/2 upconversion photoluminescence (UCPL) emission. The dominance of the red UCPL emission over the green Er³⁺: ⁴F_7/2/²H_11/2/⁴S_3/2 → ⁴I_15/2 component was investigated using the measurement of the steady-state and time-dependent Er³⁺ and Yb³⁺ emission spectra in combination with the power-dependent UCPL emission intensity. The proposed upconversion mechanism is discussed in terms of the Er³⁺ → Yb³⁺ energy back transfer process as well as Yb³⁺(Er³⁺) → Er³⁺ energy transfer and Er³⁺ ↔ Er³⁺ cross-relaxation processes. The studied Er³⁺-doped Yb₃Ga₅O₁₂ garnet may be utilized as a red upconversion emitting phosphor.     

Color-tunable up-conversion emission from Yb3+/Er3+/Tm3+/Ho3+ codoped KY(MoO4)2 microcrystals based on energy transfer

Tunable up-conversion luminescent material KY(MoO₄)₂: Yb³⁺, Ln³⁺ (Ln=Er, Tm, Ho) has been synthesized by a typical hydrothermal process. Under 980 nm laser diode (LD) excitation, the emission intensity and the corresponding luminescence colors of KY(MoO₄)₂: Yb³⁺, Ln³⁺ (Ln=Er, Tm, Ho) have been investigated in detail. The energy transfer from the Yb³⁺ sensitizer to Ho³⁺, Er³⁺ and Tm³⁺ activators plays an important role in the development of color-tunable single- phased phosphors. The emission intensity keep balance through control of the Ho³⁺ co-doping concentrations, white light was experimentally shown at KY(MoO₄)₂: 20 mol% Yb³⁺, 0.8 mol% Er³⁺, 0.5 mol% Tm³⁺, 1.0 mol% Ho³⁺ phosphor with further calcination at 800 °C for 4 h under 980 nm laser excitation. The color tunability, high quality of white light and high intensity of the emitted signal make these up-conversion (UC) phosphors excellent candidates for applications in solid-state lighting.     

Upconversion luminescence properties of NaBi(MoO4)2:Ln3+, Yb3+ (Ln = Er,Ho) nanomaterials synthesized at room temperature

Studies on lanthanide ions doped upconversion nanomaterials are increasing exponentially due to their widespread applications in various fields such as diagnosis, therapy, bio-imaging, anti-counterfeiting, photocatalysis, solar cells and sensors, etc. Here, we are reporting upconversion luminescence properties of NaBi(MoO₄)₂:Ln³⁺, Yb³⁺ (Ln = Er, Ho) nanomaterials synthesized at room temperature by simple co-precipitation method. Diffraction and spectroscopic studies revealed that these nanomaterials are effectively doped with Ln³⁺ ions in the scheelite lattice. DR UV–vis spectra of these materials exhibit two broad bands in the range of 200–350 nm correspond to MoO₄²⁻ charge transfer, s-p transition of Bi³⁺ ions and sharp peaks due to f-f transition of Ln³⁺ ions. Upconversion luminescence properties of these nanomaterials are investigated under 980 nm excitation. Doping concentration of Er³⁺ and Yb³⁺ ions is optimized to obtain best upconversion photoluminescence in NaBi(MoO₄)₂ nanomaterials and is found to be 5, 10 mol % for Er³⁺, Yb³⁺, respectively. NaBi(MoO₄)₂ nanomaterials co-doped with Er³⁺, Yb³⁺ exhibit strong green upconversion luminescence, whereas Ho³⁺, Yb³⁺ co-doped materials show strong red emission. Power dependent photoluminescence studies demonstrate that emission intensity increases with increasing pump power. Fluorescence intensity ratio (FIR) and population redistribution ability (PRA) of ²H_11/2 → ⁴I_15/2, ⁴S_3/2 → ⁴I_15/2 transitions of Er³⁺ increases with increasing the Yb³⁺ concentration. Also, these values increase linearly with increasing the pump power up to 2 W. It reveal that these thermally coupled energy levels are effectively redistributed in co-doped samples due to local heating caused by Yb³⁺.     

Bright red upconversion luminescence from Er3+ and Yb3+ co-doped ZnO-TiO2 composite phosphor powder

ZnO-TiO₂ composites co-doped with Er³⁺ and Yb³⁺ ions were successfully synthesized by powder-solution mixing method and their upconversion (UC) luminescence was evaluated. The effect of firing temperature, ZnO/TiO₂ mixing ratio, and dopant concentration ranges on structural and UC luminescence properties was investigated. The crystal structure of the product was studied and calculated in detail by means of X-ray diffraction (XRD). Also, the site preference of Er³⁺ and Yb³⁺ ions in the host material was considered and analyzed based on XRD results and UC luminescence characteristics. Brightest UC luminescence was observed in the ZnO-TiO₂:Er³⁺,Yb³⁺ phosphor fired at 1300 °C in which the system consisted of mixed phases; Zn₂TiO₄, TiO₂, RE₂Ti₂O₇ and RE₂TiO₅ (RE = Er³⁺ and/or Yb³⁺). Under the excitation of a 980 nm laser, the two emission bands were detected in the UC emission spectrum, weak green band centered at 544 and 559 nm, and strong red band centered at 657 and 675 nm wavelengths in accordance with ²H_11/2, ⁴S_3/2 → ⁴I_15/2 and ⁴F_9/2 → ⁴I_15/2 transitions of Er³⁺ ion, respectively. The simple chemical formula equations, for explaining the site preference of Er³⁺ and Yb³⁺ ions in host crystal matrix, were generated by considering the Zn₂TiO₄ crystal structure, its crystal properties, and the effect of Er³⁺ and Yb³⁺ ions to the host crystal matrix. The UC emission intensity of the products was changed by varying ZnO/TiO₂ mixing ratios, and Er³⁺ and Yb³⁺ concentrations. The best suitable condition for emitting the brightest UC emission was 1ZnO:1TiO₂ doped with 3 mol% Er³⁺, 9 mol% Yb³⁺ fired at 1300 °C for 1 h.     

Upconversion properties of Er,Yb co-doped KBi(MoO4)2 nanomaterials for optical thermometry

Rare earth ions doped upconversion materials have an extensive range of utilizations because of their exceptional luminescence properties. Here, scheelite type Yb³⁺, Er³⁺ co-doped KBi(MoO₄)₂ nanomaterials were produced by means of a conventional co-precipitation method at room temperature with a typical crystallite size of 13 nm. 980 nm excitation aided in the investigation of the concentration and power-dependent upconversion emission. The optimum upconversion emission is obtained with Er and Yb concentrations of 0.035 and 0.125 mol%, respectively in KBi(MoO₄)₂ nanomaterials. The intensity ratio of upconversion emission bands based on 529 and 551 nm is investigated in the temperature range of 200–550 K and the theoretical function is used for fitting the exploratory information. The absolute sensitivity is found to be of maximum value of 0.0123 K^-1, indicating that this double molybdate can be utilized as a potential probe for luminescence-based temperature sensing.     

Upconversion emission,cathodoluminescence and temperature sensing behaviors of Yb3+ ions sensitized NaY(WO4)2:Er3+ phosphors

A series of Yb³⁺ ions sensitized NaY(WO₄)₂:Er³⁺ phosphors were synthesized through a solid-sate reaction method. The X-ray diffraction (XRD), upconversion (UC) emission and cathodoluminescence (CL) measurments were applied to characterize the as-prepared samples. Under the excitation of 980 nm light, bright green UC emissions corresponding to (²H_11/2,⁴S_3/2)→⁴I_15/2 transitions of Er³⁺ ions were observed and the UC emission intensities showed an upward trend with increasing the Yb³⁺ ion concentration, achieving its optimum value at 25 mol%. Furthermore, the temperature sensing behavior based on the thermally coupled levels (²H_11/2,⁴S_3/2) of Er³⁺ ions was analyzed by a fluorescence intensity ratio technique. It was found that the obtained samples can be operated in a wide temperature range of 133–773 K with a maximum sensitivity of approximately 0.0112 K⁻¹ at 515 K. Ultimately, strong CL properties were observed in NaY(WO₄)₂:0.01Er³⁺/0.25Yb³⁺ phosphors and the CL emission intensity increased gradually with the increment of accelerating voltage and filament current.     

Microwave Sol–Gel Synthesis of CaGd2(MoO4)4:Er3+/Yb3+ Phosphors and Their Upconversion Photoluminescence Properties

CaGd₂(MoO₄)₄:Er³⁺/Yb³⁺ phosphors with the doping concentrations of Er³⁺ and Yb³⁺ (x = Er³⁺ + Yb³⁺, Er³⁺ = 0.05, 0.1, 0.2, and Yb³⁺ = 0.2, 0.45) have been successfully synthesized by the microwave sol–gel method, and the crystal structure refinement and upconversion photoluminescence properties have been investigated. The synthesized particles, being formed after heat‐treatment at 900°C for 16 h, showed a well‐crystallized morphology. Under the excitation at 980 nm, CaGd₂(MoO₄)₄:Er³⁺/Yb³⁺ particles exhibited strong 525 and 550‐nm emission bands in the green region and a weak 655‐nm emission band in the red region. The Raman spectrum of undoped CaGd₂(MoO₄)₄ revealed about 15 narrow lines. The strongest band observed at 903 cm^?1 was assigned to the ν₁ symmetric stretching vibration of MoO₄ tetrahedrons. The spectra of the samples doped with Er and Yb obtained under 514.5 nm excitation were dominated by Er³⁺ luminescence preventing the recording Raman spectra of these samples. Concentration quenching of the erbium luminescence at ²H_11/2→⁴I_15/2 and ⁴S_3/2→⁴I_15/2 transitions in the CaGd₂(MoO₄)₄:Er³⁺/Yb³⁺ crystal structure was established to be approximately at the 10 at.% doping level.     

Effect of Li+ Ions Doping on Microstructure and Upconversion Emission of Y2Ti2O7:Er3+/Yb3+ Nanophosphors Synthesized Via a Sol–Gel Method

Er³⁺/Yb³⁺/Li⁺‐tridoped Y₂Ti₂O₇ nanophosphors were synthesized via a facile sol–gel process. The samples were characterized by the inductively coupled plasma atomic emission spectrometer (ICP‐AES), X‐ray diffraction (XRD), transmission electron microscopy (TEM), and infrared‐to‐visible upconversion (UC) luminescence spectra. XRD analysis showed that the crystallization temperature of pyrochore‐type Y₂Ti₂O₇ was reduced due to the flux effect of Li⁺ ions, whereas TEM measurements confirmed that the particles size of (Y_0.815Er_0.01Yb_0.075Li_0.10)₂Ti₂O₇ was about 30–40 nm when calcining at 800°C for 1.0 h. The calcining temperature and Li⁺ ion concentration dependence on UC luminescence spectra were investigated. It was found that, when incorporating 10.0 mol% Li⁺ ion, the UC red and green emission intensity was drastically increased by a factor of 18.6 and 8.3, respectively. The enhancement of UC emission may be mainly attributed to the modification of local symmetry around Er³⁺ ions by tridoping Li⁺ ions. And also, the pump power dependence of the emission intensity was investigated to understand the fundamental UC mechanism.     

Evolution of Strong Red Upconversion Luminescence in Er3+‐Containing Oxy‐Fluoride Glass and Glass‐Ceramics

The Er³⁺ concentration dependencies of upconversion luminescence in oxy‐fluoride glass and glass‐ceramics containing PbF₂ nanocrystals were investigated. Strong red emission from the ⁴F_9/2 → ⁴I_15/2 transition was observed with the addition of ~0.8 mol% Er³⁺ ions, whereas ~10 mol% of Er³⁺ is required to achieve such emission in several other crystalline hosts. Intensities of red emission further increased with the formation of nanocrystals through heat treatment. The Er³⁺ ions enriched in glass and segregated preferentially inside the PbF₂ nanocrystals that decreased the distance among Er³⁺ ions and thereby facilitated energy transfer.     

Enhancement of up-conversion emission and emerging cool white light emission in co-doped Yb3+/ Er3+: Li2O-LiF-B2O3-ZnO glasses for photonic applications

A series of co-doped (Yb³⁺/Er³⁺): Li₂O-LiF-B₂O₃-ZnO glasses were prepared by standard melt quenching technique. Structural and morphological studies were carried out by XRD and FESEM. Phonon energy dynamics have been clearly elucidated by Laser Raman analysis. The pertinent absorption bands were observed in optical absorption spectra of singly doped and co-doped Yb³⁺/Er³⁺: LBZ glasses. We have been observed a strong up-conversion red emission pertaining to Er³⁺ ions at 1.0 mol% under the excitation of 980 nm. However, the up-conversion and down conversion (1.53 µm) emission intensities were remarkably enhanced with the addition of Yb³⁺ ions to Er³⁺: LBZ glasses due to energy transfer from Yb³⁺ to Er³⁺. Up-conversion emission spectra of co-doped (Yb³⁺/Er³⁺): LBZ glasses exhibits three strong emissions at 480 nm, 541 nm and 610 nm which are assigned with corresponding electronic transitions of ²H_9/2 → ⁴I_15/2, ⁴S_3/2 → ⁴I_15/2 and ⁴F_9/2 → ⁴I_15/2 respectively. Consequently, the green to red ratio values (G/R) also supports the strong up-conversion emission. The Commission International de E′clairage coordinates and correlated color temperatures (CCT) were calculated from their up-conversion emission spectra of co-doped (Yb³⁺/Er³⁺): LBZ glasses. The obtained chromaticity coordinates for optimized glass (0.332, 0.337) with CCT value at 5520 K are very close to the standard white colorimetric point in cool white region. These results could be suggested that the obtained co-doped (Yb³⁺/Er³⁺): LBZ glasses are promising candidates for w-LEDs applications.     

Intense 2.85 μm mid-infrared emissions in Yb3+/Ho3+ codoped and Yb3+/Er3+/Ho3+ tridoped TBLL fluorotellurite glasses and their energy transfer mechanism

Yb³⁺/Ho³⁺ codoped and Yb³⁺/Er³⁺/Ho³⁺ tridoped TeO₂–BaF₂–LaF₃–La₂O₃ (TBLL) fluorotellurite glasses with low OH^? absorption (0.026 cm^-1), high glass transition temperature (434 °C) and low phonon energy (784 cm^-1) were prepared. Their mid-infrared fluorescence properties and related energy transfer (ET) mechanism were studied under 980 nm excitation. A strong emission at 2.85 μm was realized in Yb³⁺/Ho³⁺ codoped tellurite glass, which was attributed to the high-efficiency ET from Yb³⁺ ions to Ho³⁺, and the ET efficiency was 91.1%. Further introduction of Er³⁺ ions induced stronger 2.85 μm emission, and the ET efficiency was improved to 96.2%, ascribed to the establishment of more ET channels and Er³⁺ ions playing the role of ET bridge between Yb³⁺ and Ho³⁺ ions. These results indicate that the Yb³⁺/Er³⁺/Ho³⁺ tridoped tellurite glass could be a hopeful gain medium material for the ～3 μm fiber laser.     

Visible green upconversion luminescence of Er3+/Yb3+/Li+ co-doped CaWO4 particles

The upconversion (UC) luminescence of Li⁺/Er³⁺/Yb³⁺ co-doped CaWO₄ phosphors is investigated in detail. Single crystallized CaWO₄:Li⁺/Er³⁺/Yb³⁺ phosphor can be obtained, co-doped up to 25.0/5.0/20.0 mol% (Li⁺/Er³⁺/Yb³⁺) by solid-state reaction. Under 980 nm excitation, CaWO₄:Li⁺/Er³⁺/Yb³⁺ phosphor exhibited strong green UC emissions visible to the naked eye at 530 and 550 nm induced by the intra-4f transitions of Er³⁺ (²H_11/2,⁴S_3/2→⁴I_15/2). The optimum doping concentrations of Yb³⁺/Li⁺ for the highest UC luminescence were verified to be 10/15 mol%, and a possible UC mechanism that depends on the pumping power is discussed in detail.     

Influence of Cr3+ on yellowish-green UC emission and energy transfer of Er3+/Cr3+/Yb3+ tri-doped zinc silicate glasses

In this paper, we study the influence of Cr³⁺ on yellowish-green upconversion (UC) emission and the energy transfer (ET) of Er³⁺/Cr³⁺/Yb³⁺ tri-doped in SiO₂–ZnO–Na₂O–La₂O₃ (SZNL) zinc silicate glasses under excitation of the 980 nm laser diode (LD). The influence of Cr³⁺ on enhancing the red UC emission of Er³⁺/Cr³⁺/Yb³⁺ tri-doped in SiO₂–ZnO–Na₂O–La₂O₃ zinc silicate glasses under the excitation of 980nm LD was also investigated. The ET processes between Yb³⁺, Cr^3+, and Er³⁺, together with the combination of Yb³⁺-Cr³⁺-Er³⁺, which led to the green UC emission intensity of Er³⁺/Cr³⁺/Yb³⁺ tri-doped in SiO₂–ZnO–Na₂O–La₂O₃ zinc silicate glasses bands centered at ~546 nm have been significantly enhanced. By increasing the concentration of Cr³⁺ from 0 up to 5 mol.%, we can locate the Commission Internationale de l'éclairage (CIE) 1931 (x; y) chromaticity coordinates for UC emissions of Er³⁺/Cr³⁺/Yb³⁺ tri-doped in the central position of the yellowish-green color region of CIE 1931 chromaticity diagram. Besides, the ET processes between the Yb³⁺, Cr³⁺, and Er³⁺ are also proposed and discussed.     

Multicolor upconversion emission and highly optical temperature sensing based on lanthanide-doped double perovskite Sr2LaNbO6 phosphors

Here we adopt trivalent lanthanide (Ln³⁺ = Er³⁺, Er³⁺/Ho³⁺, and Yb³⁺/Tm³⁺) doped Sr₂LaNbO₆ (SLNO) as novel upconversion luminescence (UCL) materials for achieving UCL and optical temperature sensing under 980 nm excitation. Specifically, Er³⁺ single doped Sr₂LaNbO₆ phosphors present bright high-purity green emission under the 980 nm excitation. While co-doping with the Ho³⁺ ions, the component of red emission from Er³⁺ ions increases significantly and sample show a remarkable enhancement of luminescent intensity relative to SLNO:Er³⁺ sample. The above-mentioned phosphors and Yb³⁺/Tm³⁺ co-doped phosphor (blue emission) successfully achieve high-purity trichromatic UCL and mixed white light output in the same host. Furthermore, the temperature sensing performance of the SLNO:Er³⁺/Ho³⁺ phosphor based on the fluorescence intensity ratio (FIR) is systematically studied for the first time. The temperature sensing based on the non-thermal coupling levels (NTCLs) exhibit higher sensitivity than that based on the thermal coupling levels (TCLs). The maximum absolute and relative sensitivity for ⁴F_9/2/⁴I_9/2 NTCLs reach 0.16803 K^?1 at 427 K and 0.01591 K^?1 at 641 K, respectively. Interestingly, NIR emission of ⁴I_9/2 → ⁴I_15/2 transition presents a thermal enhancement, while visible emissions show thermal quenching. These results indicate that the Ln³⁺ doped Sr₂LaNbO₆ UCL phosphors have potential applications in the fields of non-contact temperature sensors, full-color displays, and anti-counterfeiting.     

Optical Temperature Sensing Behavior of High‐Efficiency Upconversion: Er3+–Yb3+ Co‐Doped NaY(MoO4)2 Phosphor

A class of Yb³⁺/Er³⁺ co‐doped NaY(MoO₄)₂ upconversion (UC) phosphors have been successfully synthesized by a facile hydrothermal route with further calcination. The structural properties and the phase composition of the samples were characterized by X‐ray diffraction (XRD). The UC luminescence properties of Yb³⁺/Er³⁺ co‐doped NaY(MoO₄)₂ were investigated in detail. Concentration‐dependent studies revealed that the optimal composition was realized for a 2% Er³⁺ and 10% Yb³⁺‐doping concentration. Two‐photon excitation UC mechanism further illustrated that the green enhancement arised from a novel energy‐transfer (ET) pathway which entailed a strong ground‐state absorption of Yb³⁺ ions and the excited state absorption of Yb³⁺–MoO₄^2? dimers, followed by an effective energy transfer to the high‐energy state of Er³⁺ ions. We have also studied the thermal properties of UC emissions between 303 and 523 K for the optical thermometry behavior under a 980 nm laser diode excitation for the first time. The higher sensitivity for temperature measurement could be obtained compared to the previous reported rare‐earth ions fluorescence based optical temperature sensors. These results indicated that the present sample was a promising candidate for optical temperature sensors with high sensitivity.     

Morphology control and temperature sensing properties of micro-rods NaLa(WO4)2:Yb3+,Er3+ phosphors

Uniform spindle-like micro-rods NaLa(WO₄)₂:Yb³⁺,Er³⁺ phosphors are prepared by the solvothermal method in the text. Controllable morphology of NaLa(WO₄)₂ crystal can be obtained by adjusting the prepared temperature, PH value, complexing agent content, and solvent ratio. Uniform NaLa(WO₄)₂:Yb³⁺,Er³⁺ micro-rods of 1.8 μm in length and 0.5 μm in width are synthesized at a low temperature of 120°C. The prepared NaLa(WO₄)₂:Yb³⁺,Er³⁺ phosphors present green upconversion luminescence under 980 nm excitation, luminescence intensity reaches to maximum at the Yb³⁺ and Er³⁺ concentration of 6 and 2 mol%. The temperature performance of the NaLa(WO₄)₂:Yb³⁺,Er³⁺ phosphors are evaluated based on thermal coupling technology. Temperature dependence of the two green emissions ratio of Er³⁺ ion is obtained, and the sensitivity of the sample can be calculated, the maximum sensitivity of NaLa(WO₄)₂:Yb³⁺,Er³⁺ is up to 0.019 K⁻¹ at the sample temperature of 564 K.     

Enhancing upconversion emission and temperature sensing modulation of the La2(MoO4)3: Er3+, Yb3+ phosphor by adding alkali metal ions

Trivalent Er³⁺-doped La₂(MoO₄)₃ upconversion phosphors with intense green emmision were synthesized at 800 °C by the solid-state reaction route, promoting the development of novel optical thermometry. The color emitted from the samples was minorly affected by the excitation power and doping concentration. Yb³⁺ is a better sensitizer for the La₂(MoO₄)₃: Er³⁺ phosphor and it can enhance the emission intensity when a certain amount is co-doping in the system. The up-conversion luminescent mechanism was investigated using the pump power-dependent UC emission spectra. Alkali metal doping increased the up-conversion emission intensities drastically, and Li⁺ ions can enhance the luminous intensity by more than 20 times. The fluorescence intensity ratio of the transition emission ²H_11/2-⁴I_15/2 and ⁴S_3/2-⁴I_15/2 was used to study upconversion optical temperature sensing. The sensitivity changes from doping with diverse alkali metal ions and their effects on the optimal temperature range are discussed in detail. Alkali metal ions doping extended the temperature range, indicating that this phosphor is a potential candidate for temperature-sensing probes.     

Down-conversion from Er3+-Yb3+ codoped CaMoO4 phosphor: A spectral conversion to improve solar cell efficiency

The present paper focuses on near infrared (NIR) down-conversion photoluminescence (PL) properties by studying the energy transfer mechanism between Er³⁺ and Yb³⁺ in CaMoO₄:Er³⁺, Yb³⁺ phosphors. We have successfully synthesized a series of Er³⁺ doped and Yb³⁺ codoped CaMoO₄ phosphors by hydrothermal method. The down-conversion of Er³⁺-Yb³⁺ combination with CaMoO₄ phosphor is designed to overcome the energy losses due to spectral mismatch when a high energy photon is incident on the Si-solar cell. The XRD, FESEM, EDX, PL, UV–Vis, Lifetime measurements were carried out to characterize the prepared down-converting phosphors. The crystallinity and surface morphology were studied by X-ray diffraction (XRD) and Field Emission Scanning Electron Microscopy (FESEM) techniques. The down-conversion PL spectra have been studied using 380 nm excitation wavelength. The Er³⁺ doped phosphors exhibit hypersensitive emission at 555 nm in the visible region due to ⁴S_3/2→⁴I_15/2 transition. The addition of Yb³⁺ into Er³⁺ doped CaMoO₄ attribute an emission at 980 nm due to ²F_5/2→²F_7/2 transition. The decrease in emission intensity in visible region and increase in NIR region reveals the energy transfer from Er³⁺ to Yb³⁺ through cross relaxation. The UV–Vis–NIR spectra shows the strong absorption peak around 1000 nm due to Yb³⁺ ion. The lifetime measurement also reveals the energy transfer from Er³⁺ to Yb³⁺ ions. The maximum value of energy transfer efficiency (ETE) and corresponding theoretical internal quantum efficiency are estimated as 74% and 174% respectively.