Gas Separation Properties of Polyimide-Zeolite Mixed Matrix Membranes

Mixed matrix membranes (MMMs) of polyimide (PI) and zeolite 13X, ZSM-5 and 4A were prepared by a solution-casting procedure. The effect of zeolite loading, pore size, and hydrophilicity/hydrophobicity of zeolite on the gas separation properties of these mixed matrix membranes were studied. Experimental results indicate that permeability of He, H₂, CO₂, and N₂ increased with zeolite loadings. Selectivity of H₂/N₂ shows a slight improvement for low loadings of zeolites 13X and ZSM-5 but has a decreasing trend for zeolite 4A and high loadings of zeolites 13X and ZSM-5. In addition, selectivity of H₂/CO₂ remains low (1–3) while selectivity of CO₂/N₂ is significantly improved with the incorporation of the three zeolites in the polyimide membrane. Experimental permeabilities are higher than those predicted by the Maxwell model except for H₂ and N₂ permeabilities of the PI-4A system which are consistent with the predicted permeabilities. The proposed modified Maxwell model is capable of predicting the permeabilities of polyimide-zeolite 4A MMMs, but fails to simulate the permeability increase induced by interface voids in the polyimide-zeolite 13X and ZSM-5 systems.     

High speed spin coating in fabrication of Pebax 1657 based mixed matrix membrane filled with ultra-porous ZIF-8 particles for CO<Subscript>2</Subscript>/CH<Subscript>4</Subscript> separation

Modified ultra-porous ZIF-8 particles were used to prepare novel ZIF-8/Pebax 1657 mixed matrix membranes (MMMs) on PES support for separation of CO₂ from CH₄ using spin coating method. TEM and SEM were used to characterize modified ZIF-8 particles. SEM was also used to investigate the morphology of synthesized MMMs. The MMMs with thinner selective layer showed higher CO₂ permeability and lower CO₂/CH₄ selectivity in permeation tests compared to MMMs with thicker selective layer. The plasticization was recognized as the main reason for rise in CO₂ permeability and drop in CO₂/CH₄ selectivity of thinner MMMs. The gas sorption results showed that the high permeability of CO₂ in MMMs is mainly due to the high solubility of this gas in MMMs, leading to high CO₂/CH₄ solubility selectivity for MMMs. The fractional free volume and void volume fraction of MMMs increased as the thickness of membrane decreased. Applying higher mixed feed pressures and permeation tests temperatures resulted in increase in CO₂ permeability and decrease in CO₂/CH₄ selectivity. At highest testing temperature (60 °C), the CO₂ permeability of synthesized MMMs with thinner selective layer remarkably increased.     

Effect of the ZIF‐8 Distribution in Mixed‐Matrix Membranes Based on Matrimid® 5218‐PEG on CO2 Separation

In theory, the combination of inorganic materials and polymers may provide a synergistic performance for mixed‐matrix membranes (MMMs); however, the filler dispersion into the MMMs is a crucial technical parameter for obtaining compelling MMMs. The effect of the filler distribution on the gas separation performance of the MMMs based on Matrimid®‐PEG 200 and ZIF‐8 nanoparticles is demonstrated. The MMMs were prepared by two different membrane preparation procedures, namely, the traditional method and non‐dried metal‐organic framework (MOF) method. In CO₂/CH₄ binary mixtures, the MMMs were tested under fixed conditions and characterized by various methods. Finally, regardless of the MMM preparation procedure, the incorporation of 30 wt % ZIF‐8 nanoparticles allowed to increase the CO₂ permeability in MMMs. The ZIF‐8 dispersion influenced significantly the separation factor.     

PBI/Clinoptilolite mixed-matrix membranes for binary (N2/CH4) and ternary (CO2/N2/CH4) mixed gas separation

In this work, polybenzimidazole (PBI)-based mixed matrix membranes (MMMs) with natural zeolite were prepared and their transport properties for binary (N₂/CH₄) and ternary (CO₂/N₂/CH₄) mixed-gas separation were studied. The MMMs, were prepared with PBI as polymeric matrix and Mexican natural zeolite clinoptilolite enriched with cations of Ca²⁺ as filler. The thermal properties analysis of the PBI and MMMs studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) indicates that the MMMs membranes have Tg higher than 350°C and decomposition temperatures above 600°C compared with the pristine membranes. PBI membrane and MMMs were analyzed by X-Ray Diffraction (XRD) and the diffraction patterns showed the zeolite signals combine with the amorphous dome from the polymeric matrix. In addition, the perm-selectivity properties of the polymeric membranes and MMMs were tested with binary (N₂/CH₄; 10/90 mol%) and ternary (CO₂/N₂/CH₄; 5/10/85 mol%) gas mixtures at different pressure rates (50, 150 and 300 psi). The perm-selectivity properties of the MMMs membranes show an improvement in their values about 30% higher compared to the PBI polymeric membranes, favoring the permeation of CO₂ and N₂.     

Effect of graphene oxide on the behavior of poly(amide‐6‐b‐ethylene oxide)/graphene oxide mixed‐matrix membranes in the permeation process

Polyether‐block‐amide (Pebax)/graphene oxide (GO) mixed‐matrix membranes (MMMs) were prepared with a solution casting method, and their gas‐separation performance and mechanical properties were investigated. Compared with the pristine Pebax membrane, the crystallinity of the Pebax/GO MMMs showed a little increase. The incorporation of GO induced an increase in the elastic modulus, whereas the strain at break and tensile strength decreased. The apparent activation energies (E_p) of CO₂, N₂, H₂, and CH₄ permeation through the Pebax/GO MMMs increased because of the greater difficulty of polymer chain rotation. The E_p value of CO₂ changed from 16.5 kJ/mol of the pristine Pebax to 23.7 kJ/mol of the Pebax/GO MMMs with 3.85 vol % GO. Because of the impermeable nature of GO, the gas permeabilities of the Pebax/GO MMMs decreased remarkably with increasing GO content, in particular for the larger gases. The CO₂ permeability of the Pebax/GO MMMs with 3.85 vol % GO decreased by about 70% of that of the pristine Pebax membrane. Rather than the Maxwell model, the permeation properties of the Pebax/GO MMMs could be described successfully with the Lape model, which considered the influence of the geometrical shape and arrangement pattern of GO on the gas transport. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42624.     

Current Status and Future Prospect of Polymer‐Layered Silicate Mixed‐Matrix Membranes for CO2/CH4 Separation

The mixed‐matrix membrane (MMM), a state‐of‐the‐art polymer‐inorganic hybrid, is a relatively recent addition to the membrane family which adopts the synergistic advantages of the polymer and inorganic phase. Although marked improvement has been achieved by MMMs in CO₂/CH₄ separation, the development of a defect‐free structure to transcend the Robeson upper bound limit remains a challenge. In previous years, a number of inorganic materials with diverse nature have been studied for CO₂/CH₄ separation; however, layered silicates have not attracted much attention despite their superior thermal and mechanical properties. Analyses of the potential of using layered silicates as inorganic fillers in MMM fabrication for CO₂/CH₄ separation are reviewed. Additionally, the immediate challenges toward successful formation of layered silicate‐based MMM and future prospects are addressed.     

Experimental study of the effect of zeolite 4A treated with magnesium hydroxide on the characteristics and gas‐permeation properties of polysulfone‐based mixed‐matrix membranes

Nowadays, new methods for gas‐separation processes are being quickly developed. The separation of CH₄/CO₂ and CH₄/H₂ is usually the subject of most related research studies, especially in the membrane gas‐separation process, because of their important role in industry. In this study, we attempted to improve the separation properties of a polysulfone/zeolite 4A mixed‐matrix membrane by modifying the zeolite particle surface. The method included a simple ion‐exchange reaction of magnesium chloride with ammonium hydroxide that yielded the formation and precipitation of magnesium hydroxide whiskers on the surface of the zeolites. The whiskers could omit most of the nonselective voids by interlocking the polymer chains through them and, consequently, improve the permeability, selectivity, and elastic modulus of the membranes. X‐ray diffraction, energy‐dispersive X‐ray spectroscopy, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy, and dynamic mechanical analysis proved all the changes recorded after the particle and membrane treatments. SEM images showed the petal‐like morphology of the whiskers that formed on the surface of the particles after the reaction against the smooth surface of the untreated zeolite. At a 30 wt % loading of particles in the polymeric matrix, the selectivities for H₂/CH₄ and CO₂/CH₄ increased by 69 and 56%, respectively; in contrast, the H₂ and CO₂ permeabilities decreased by 2.5 and 10%, respectively. The modulus of elasticity for the treated membrane also increased by 14 and 30% compared to those of the pure and untreated membranes, respectively. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44329.     

Fabrication of mixed‐matrix membranes with MOF‐derived porous carbon for CO2 separation

Mixed‐matrix membranes (MMMs) have shown great advantages but still face some challenges, such as the trade‐off between permeability and selectivity, stability, and the lack of efficient ways to enhance them simultaneously. Here, the fabrication of MMMs with metal‐organic frameworks derived porous carbons (MOF‐PCs) as fillers which exhibit selective‐facilitating CO₂ transport passage originating from interactions between fillers and CO₂ is showed. With the aid of the developed multicalcination method, MOF‐PCs with variable N‐contents were prepared and incorporated into PPO‐PEG matrix for the first time to prepare MMMs, which show excellent separation performance for CO₂/CH₄ mixture with a tunable separation performance by combining different N‐contents and surface areas of MOF‐PCs. Moreover, the developed MMMs have hydrothermal and chemical stability. This work not only presents a series of MMMs with both good separation properties and stability, it also provides useful information for guiding the fabrication of high performance MMMs for practical application. © 2018 American Institute of Chemical Engineers AIChE J, 64: 3400–3409, 2018     

Effect of different organic amino cations on SAPO‐34 for PES/SAPO‐34 mixed matrix membranes toward CO2/CH4 separation

Mixed matrix membranes (MMMs) embedded with functionalized SAPO‐34 were successfully synthesized and characterized. Two different types of organic amino cation, namely ethylenediamine (EDA) and hexylamine (HA), were used to functionalize SAPO‐34 particles prior to MMM synthesis. In this work, the effects of different functionalizing agents on the membrane morphology, pore size, and CO₂/CH₄ gas separation properties were investigated. Surface modification of SAPO‐34 was confirmed via X‐ray photoemission spectroscopy (XPS) where the presence of nitrogen atom was observed for the samples functionalized with amino cations. The dispersion of EDA‐functionalized SAPO‐34 particles was found to have better polymer/filler interface morphology as shown by field emission scanning electron microscopy (FESEM) analysis. The gas separation performance revealed that PES containing EDA‐functionalized SAPO‐34 exhibited better CO₂/CH₄ separation performance as compared to the MMMs containing HA‐functionalized SAPO‐34. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43387.     

Fabrication and characterization of silica modified polyimide–zeolite mixed matrix membranes for gas separation properties

In this study, new monomers having silica groups were synthesized as an intermediate for the preparation of poly(imide siloxane)-zeolite 4A and 13X mixed matrix membranes (MMMs). The effects of membrane preparation steps, zeolite loading, precursor’s composition, and pore size of zeolite on the gas separation performance of these mixed matrix membranes were studied. The new diamine monomer was prepared from 3,5-diaminobenzoic acid (3,5-DABA), 3-aminopropyltrimethoxysilane (3-APTMS), and zeolite 4A and zeolite 13X in N-methyl-2-pyrollidone (NMP) at 180 °C. Poly(imide siloxane)-zeolite 4A and 13X MMMs were synthesized from pyromellitic dianhydride (PMDA) and 4,4-oxydianiline (ODA) in NMP using a two-step thermal imidization. SEM images of the MMMs show the interface between polymer and zeolite phases getting closer when surface modified zeolite is used. The increase in glass transition temperature (T _g) confirms the polymer chain becoming more rigid induced by the presence of zeolite. The experimental results indicated that a higher zeolite loading resulted in a decrease in gas permeability and an increase in gas pair selectivity. In terms of O₂ and N₂ permeance and ideal selectivity, the separation performances of poly(imide siloxane)-zeolite MMMs were related to the zeolite type and zeolite pore dimension.     

Pebax–polydopamine microsphere mixed‐matrix membranes for efficient CO2 separation

Novel facilitated‐transport mixed‐matrix membrane (MMM) were prepared through the incorporation of polydopamine (PDA) microspheres into a poly(amide‐b‐ethylene oxide) (Pebax MH 1657) matrix to separate CO₂–CH₄ gas mixtures. The Pebax–PDA microsphere MMMs were characterized by Fourier transform infrared spectroscopy, scanning electron microcopy, X‐ray diffraction, differential scanning calorimetry, and thermogravimetric analysis. The PDA microspheres acted as an adhesive filler and generated strong interfacial interactions with the polymer matrix; this generated a polymer chain rigidification region near the polymer–filler interface. Polymer chain rigidification usually results in a larger resistance to the transport of gas with a larger molecular diameter and a higher CO₂–CH₄ selectivity. In addition, the surface of PDA microspheres contained larger numbers of amine, imine, and catechol groups; these were beneficial to the improvement of the CO₂ separation performance. Compared with the pristine Pebax membrane, the MMM with a 5 wt % PDA microsphere loading displayed a higher gas permeability and selectivity; their CO₂ permeability and CO₂–CH₄ selectivity were increased by 61 and 60%, respectively, and surpassed the 2008 Robeson upper bound line. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44564.     

Effect of gas permeation temperature and annealing procedure on the performance of binary and ternary mixed matrix membranes of polyethersulfone,SAPO‐34, and 2‐hydroxy 5‐methyl aniline

This study investigated the effect of annealing time and temperature on gas separation performance of mixed matrix membranes (MMMs) prepared from polyethersulfone (PES), SAPO‐34, and 2‐hydroxy 5‐methyl aniline (HMA). A postannealing period at 120°C for a week extensively increased the reproducibility and stability of MMMs, but for pure PES membranes no post‐annealing was necessary for stable and reproducible performance. The effect of operation temperature was also investigated. The permeabilities of H₂, CO₂, and CH₄ increased with increasing permeation temperature from 35°C to 120°C, yet CO₂/CH₄ and H₂/CH₄ selectivities decreased. PES/SAPO‐34/HMA ternary and PES/SAPO‐34 binary MMMs exhibited the highest ideal selectivity and permeability values at all temperatures, respectively. For H₂/CO₂ pair, when temperature increased from 35°C to 120°C, selectivity increased from 3.2 to 4.6 and H₂ permeability increased from 8 to 26.5 Barrer for ternary MMM, demonstrating the advantage of using this membrane at high temperatures. The activation energies were in the order of CH₄ > H₂ > CO₂ for all membranes. PES/SAPO‐34/HMA membrane had activation energies higher than that of PES/SAPO‐34 membrane, suggesting that HMA acts as a compatibilizer between the two phases. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40679.     

Mixed matrix membranes of Pebax1657 loaded with iron benzene‐1,3,5‐tricarboxylate for gas separation

Mixed matrix membranes offer major advantages in gas separation processes due to desirable properties found in both organic and inorganic membranes. In this study, a novel mixed matrix membrane was prepared for such application by incorporating iron benzene‐1,3,5‐tricarboxylate (Fe‐BTC) into the poly(amide‐6‐b‐ethylene oxide) (Pebax1657) polymer. Membranes with various loadings of 5, 10, and 20 wt% Fe‐BTC in the polymer matrix were fabricated to investigate the effect of filler loading on the membrane performance. Membranes, prepared by solution‐casting were characterized by scanning electron microscopy, thermogravimetric analysis, Fourier transform infrared, X‐ray diffraction, and tensile test. Pure gas separation of CO₂, CH₄, and N₂ and ideal gas selectivity of CO₂/CH₄ and CO₂/N₂ were performed and permeation tests were carried out under 4, 8, and 12 bar pressures. Results show that adding Fe‐BTC into the Pebax1657 matrix improved both permeability and selectivity of the filled membranes. For instance, 10 wt% loading of Fe‐BTC into the Pebax1657 matrix led to CO₂ permeability increase of 49% as well as CO₂/CH₄ and CO₂/N₂ selectivities enhancements of about 36% and 16%, respectively. POLYM. COMPOS., 38:1363–1370, 2017. © 2015 Society of Plastics Engineers     

Mixed matrix membranes based on 6FDA polyimide with silica and zeolite microsphere dispersed phases

Mixed matrix membranes (MMMs) prepared with 6FDA‐DAM polymer using ordered mesoporous silica MCM‐41 spheres (MSSs), Grignard surface functionalized MSSs (Mg‐MSSs) and hollow zeolite spheres are studied to evaluate the effects of surface modification on performance. Performance near or above the so‐called permeability‐selectivity trade‐off curve was achieved for the H₂/CH₄, CO₂/N₂, CO₂/CH_4, and O₂/N₂ systems. Two loadings (8 wt % and 16 wt %) of MSSs were tested using both constant volume and Wicke–Kallenbach sweep gas permeation systems. Besides single gas H₂, CO₂, O₂, N₂, and CH₄ tests, mixed gas (50/50 vol %) selectivities were obtained for H₂/CH₄, CO₂/N₂, CO₂/CH₄, and O₂/N₂ and found to show enhancements vs. single gases for CO₂ including cases. Mg‐MSS/6FDA‐DAM was the best performing MMM with H₂/CH₄, CO₂/N₂, CO₂/CH₄, and O₂/N₂ separation selectivities of 21.8 (794 Barrer of H₂), 24.4 (1214 Barrer of CO₂), 31.5 (1245 Barrer of CO₂), and 4.3 (178 Barrer of O₂), respectively. © 2015 American Institute of Chemical Engineers AIChE J, 61: 4481–4490, 2015     

Tuning the gas separation performance of fluorinated and sulfonated PEEK membranes by incorporation of zeolite 4A

Mixed matrix membranes (MMMs) containing fluorinated‐sulfonated poly(ether ether ketone) (F‐SPEEK) and zeolite 4A filler, were prepared by solution casting. F‐SPEEK with a fixed degree of sulfonation (40%) was used for membrane synthesis. The SEM pictures showed good interfacial adhesion between filler particles and polymer, which was also confirmed by the increase in glass transition temperature of MMMs with increase in filler particles. Pure and mixed gas permeation experiments were carried out to investigate the potential of this membrane material. The results revealed that addition of zeolite 4A fillers enhanced both permeability and selectivity owing to the intrinsic nature of polymer and modified membrane morphology due to filler. The highest permeability obtained for CO₂ at 30% filler loading was 49.2 Barrer, while highest selectivities obtained for CO₂/CH₄ and CO₂/N₂ were 55 and 58 compared to 47 and 51 for the unfilled polymer, respectively. Intrinsic CO₂ solubility of F‐SPEEK was observed to be decreased from 10.7 to 1.9 (10^?2) cm³ (STP)/cm³ cmHg with the addition of Zeolite 4A. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45952.     

Gas‐separation properties of amine‐crosslinked polyimide membranes modified by amine vapor

The modification of a polyimide (PI) membrane by aromatic amine vapor was performed in this work to increase the crosslinking of the membrane and to study the effect on gas permeability and the corresponding selectivity. The single‐gas permeability of the membranes at 35 °C was probed for H₂, O₂, N₂, CO₂, and CH₄. From the relationship between the combinations of gases and ideal permselectivities, this study showed that amine‐crosslinked PI membranes tended to increase gas permselectivities exponentially with the increasing difference in gas kinetic diameter. Moreover, this study illustrated that the permeability of the membranes was influenced by the formation rate of amine‐crosslinked networks or chemical structures after the reaction. The membranes had the highest level of permselectivities among crosslinked PI membranes for O₂/N₂, and the H₂/CH₄ permselectivity increased 26 times after vapor modification. Furthermore, the modification method that used aromatic amine vapor produced thin and strongly modified layers. These findings indicate that modification is an advantageous technique for improving gas‐separation performance, even considering thinning. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44569.     

Theoretical and experimental studies on the gas transport properties of mixed matrix membranes based on polyvinylidene fluoride

The effects of the impregnation of three types of inorganic fillers into polyvinylidene fluoride (PVDF) polymer membranes on the gas permeability and selectivity of these membranes were studied theoretically and experimentally. Permeabilities of He, CO₂, O₂, and N₂ through three types of mixed matrix membranes (MMMs) based on PVDF, that is, PVDF/SiO₂, PVDF/MCM‐41, and PVDF/4A MMMs, were experimentally measured and theoretically predicted using Maxwell, Higuchi, Bruggeman, and Bottcher‐Landauer models. Theoretical permeabilities of the PVDF/SiO₂ MMMs using the above four models predicted the results in the following order: Maxwell model>Bruggeman model>Bottcher model>Higuchi model. However, this sequence was reversed for PVDF/MCM‐41 MMMs. The nonporous SiO₂, mesoporous MCM‐41 and zeolite 4A inorganic fillers had effects on the permeabilities of the challenge gases for the PVDF/SiO₂, PVDF/MCM‐41, and PVDF/4A MMMs but had no effects on the selectivities of the MMMs. The experimental permeabilities of the MMMs showed that there were no significant differences among the three types of MMMs despite that the inorganic fillers, that is, SiO₂, MCM‐41, and zeolite 4A, had distinct dissimilar properties such as pore structures and particle sizes. Density measurements indicated that some voids were present in the polymer/particle interfaces. Based on the density measurement results, the void volume fractions of the resulting MMMs were calculated. An equation is derived to determine the void thickness of the MMM in terms of its physical properties and hence this proposed equation can substitute the difficult task of measuring such void thickness through any microscopy techniques. The Maxwell, Higuchi, Bruggeman, and Bottcher‐Landauer models could not predict the actual gas permeabilities of the PVDF MMMs. By taking the effects of crystallinity and immobilization factor on gas permeability into consideration, the extended modified Maxwell model showed good agreement with the experimental gas permeabilities of the resulting MMMs, indicating that the model did capture the essence of the gas transport behaviors through the MMMs. © 2013 American Institute of Chemical Engineers AIChE J, 59: 4715–4726, 2013     

Preparation and Characterization of Polycarbonate-Blend-Raw/Functionalized Multi-Walled Carbon Nano Tubes Mixed Matrix Membrane for CO2 Separation

Membrane composed of PC as base of polymer matrix with different ratio of multiwall carbon nano tubes (MWCNTs) as nanofillers and poly ethylene glycol (PEG) as second polymer was prepared by solution casting method. Both raw-MWCNTs (R-MWCNTs) and functionalized carboxyle-MWCNTs (C-MWCNTs) were used in membrane preparation. The MWCNTs loading ratio and pressure effects on the gas transport properties of membranes were examined in relation to pure He, N₂, CH₄, and CO₂ gases. Results showed that the use of C-MWCNT instead of R-MWCNTs in mixed matrix membranes (MMMs) fabrication with base of PC provides better performance and also it increases (CO₂/CH₄) and (CO₂/N₂) selectivities to 27.38 and 25.42 from 25.45 and 19.24, respectively (at 5 wt% of MWCNTs). PEG as the second rubbery polymer was utilized to improve the separation performance and mechanical properties. In blend MMMs, highest (CO₂/CH₄) selectivity at 2 bar pressure increased to 35.64 for PC/PEG/C-MWCNT blend MMMs which was 27.28 for PC/MWCNTs MMMs at 10 wt%. Increase of feed pressure led to gas permeability and gas pair selectivity improvement in approximately all of membranes. Analysis of mechanical properties showed improvement in tensile modules with the increase of MWCNTs loading ratio and use of PEG in prepared MMMs.     

Amine-impregnated natural zeolite as filler in mixed matrix membranes for CO2/CH4 separation

Flat mixed matrix membranes (MMMs) comprising polysulfone and clinoptilolite-type natural zeolite were prepared by casting. Zeolite was modified with three alkylamines: ethanolamine (EA), bis(2-hydroxypropyl)amine (BHPA), and polyethylenimine (PEI) by the impregnation method. Impregnated zeolite samples were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and N₂ adsorption–desorption. The alkylamine loading extent determined by thermogravimetric analysis was 5.2, 4.8, and 8.5% for EA, BHPA, and PEI, respectively. Analyses of MMMs showed that the incorporation of impregnated zeolite affected the glass-transition temperature (T_g) and mixed-gas transport properties. In this regard, a decreasing trend of the T_g values from 185.5 °C for the polymeric membrane up to 176.6 °C for Clino-EA-based MMM was recorded. In addition, the gas separation performance was evaluated at two different feed pressures. At 50 psi, MMMs showed an enhancement up to 30% on the CO₂ permeability (22.79 Barrer) and 55% on the CO₂/CH₄ selectivity (45.78) in comparison with the polymeric membrane (CO₂ permeability 17.34 Barrer; CO₂/CH₄ selectivity 29.38). These values varied depending on the alkylamine, BHPA being the most selective. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48286.     

Gas permeation performance of cellulose hollow fiber membranes made from the cellulose/N‐methylmorpholine‐N‐oxide/H2O system

Cellulose hollow fiber membranes (CHFM) were prepared using a spinning solution containing N‐methylmorpholine‐N‐oxide as solvent and water as a nonsolvent additive. Water was also used as both the internal and external coagulant. It was demonstrated that the phase separation mechanism of this system was delayed demixing. The CHFM was revealed to be homogeneously dense structure after desiccation. The gas permeation properties of CO₂, N₂, CH₄, and H₂ through CHFM were investigated as a function of membrane water content and operation pressure. The water content of CHFM had crucial influence on gas permeation performance, and the permeation rates of all gases increased sharply with the increase of membrane water content. The permeation rate of CO₂ increased with the increase of operation pressure, which has no significant effect on N₂, H₂, and CH₄. At the end of this article a detailed comparison of gas permeation performance and mechanism between the CHFM and cellulose acetate flat membrane was given. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1873–1880, 2004