Performance evaluation of bromofluoropropene in extinguishing liquid fuel spray fires

Liquid fuel spray fires emit high radiation heat fluxes, posing great threat to humans. The study of suitable agents and techniques for extinguishing this particular type of fire is of great importance. In this study, degradable 2‐bromo‐3,3,3‐trifluoropropene (BTP), a new clean fire extinguishing agent, was tested for its effectiveness in extinguishing three types of liquid fuel spray fires, namely diesel, gasoline, and ethanol. Bench‐scale experiments were conducted in a 6 × 5 × 3 m compartment with natural ventilation. The liquid fuels sprayed at varying pressures were ignited by a small open flame and then extinguished by a portable BTP extinguisher. Results showed that BTP of less than 60.0 g could extinguish all liquid fuel spray fires of 0.20 to 1.0 MPa in less than 2.0 s. The results also showed that when compared with fire sparked by gasoline and diesel, it is significantly easier to put out ethanol spray fires because of its high flame temperature and low flame power. Based on well‐established fire suppression theories and experimental results, the detailed mechanism of how BTP functions as an extinguishing agent in the suppression of liquid fuel spray fires will be discussed. Copyright © 2013 John Wiley & Sons, Ltd.     

氟碳表面活性剂在消防领域中的应用

分析了氟碳表面活性剂的结构和性能特点;讲解了氟蛋白泡沫灭火剂、轻水泡沫灭火剂和凝胶型抗溶剂泡沫灭火剂的基本组成、性能特点和在消防领域中的应用场合等;最后指出在研发过程中科学工作者必须考虑氟碳表面活性剂对人类身体和环境可能产生的危害.     

Evaluating the performance of a portable water–mist fire extinguishing system with additives

This study investigates how high‐pressure water–mist system discharge methodologies influence the fire extinction performance for pan pool fires and the corresponding mechanisms of restraining fire. The fire source is a pool‐fire burner. Fine water spray is injected using a portable device. The additive in the water–mist is neither toxic nor corrosive. All the tests are regarded as fuel controlled. The fire test parameters are fuel type, nozzle discharge angle, and additive solution volume. The fuels used are heptane, gasoline, and diesel. Nozzle discharge angles are 30, 45, and 60° with respect to the ground. Additive solution volumes are 0% (pure water), 3, 6, and 10%. Test results indicate that the nozzle discharge angle and additive solution volume in a water–mist fire extinction system play a significant role. Fire extinguishing efficiency is influenced by mist effects and the additive. Furthermore, the water–mist system can reduce radiation and can provide good protection for operators using portable fire extinguishing equipment. Copyright © 2008 John Wiley & Sons, Ltd.     

泡沫灭火剂中全氟辛烷磺酸类物质的管控行为及替代物研究进展

全氟辛烷磺酸（perfluorooctane sulfonic acid, PFOS）使水成膜泡沫灭火剂（aqueous film forming foam,AFFF）具有较好的耐高温和抗烧能力,但由于PFOS的难降解性、生物富集性及毒性,国内外相继对PFOS类物质进行了管控。本文简述和分析了泡沫灭火剂中PFOS类物质的管控行为及替代物研究,分析表明管控行动逐步从限制走向淘汰,研究泡沫灭火剂中PFOS类物质的替代物极为迫切;替代物的研究方向主要有两个,一个是泡沫灭火剂中短氟碳链类表面活性剂研究及短氟碳链泡沫灭火剂的灭火效果验证,但短氟碳链类表面活性剂可能存在长期环境持久性的问题;另一个是泡沫灭火剂中无氟类表面活性剂的研究,如有机硅表面活性剂、甜菜碱型表面活性剂、纯化皂苷表面活性剂,但无氟类表面活性剂可能会影响无氟泡沫灭火剂的表面活性、灭火能力、灭火效果等。泡沫灭火剂中PFOS类物质的替代物研发尚任重而道远。     

常用灭火剂灭火性能及原理

详细介绍了气体灭火剂、泡沫灭火剂、干粉灭火剂和气溶胶灭火剂等多种常用灭火剂的性能及灭火原理,并对其适用条件进行了说明。     

Study on the relationship between the particle size distribution and the effectiveness of the K‐powder fire extinguishing agent

The relationship between the particle size distribution and the extinguishing effectiveness of the new K‐powder fire extinguishing agent has been studied experimentally, to explore the reason of the great extinguishing efficiency exhibited by the new K‐powder fire extinguishing agent on Class B fire (liquid fuel fire). The results of the experiment showed that the extinguishing effectiveness increased along with the decrease of the particle size distribution. In addition, a sharp discontinuity appeared around the limiting size, about 40 μm. The powder with the particle size below 40 μm exhibited highly effective extinguishing with the minimum effective extinguishing concentration C_xr = 23 g·m^?3, while the powder with the particle size above 40 μm exhibited little fire extinguishing efficiency. Compared with other fire extinguishing agents produced by different substances, the new K‐powder fire extinguishing has the bigger limiting size. That means, in the same particle size distribution, the new K‐powder fire extinguishing agent contains more highly effective powder than others contain, and is more effective.     

Research on a noble extinguish material for the underground fire prevention

The three-phase foam consisted of solid, liquid and gas is regarded as a highly effective measure for the underground mine fire prevention. In this study, the three-phase foam technology is introduced and a visualization platform is established to exhibit the foam flow in a physical goaf. The diffusion rule and extinguishing performance for three-phase foam are researched. Test results show that the three-phase foam has a superior heat resistance than expansion foam in the top goaf. The coal heating rate is postponed after the three-phase foam processing and the active functional groups are suppressed effectively. Increasing the foam expansion ratio is adverse to the three-phase foam stability. The field application of three-phase foam was evaluated via the practical extinguishment effect. The marked reduction in the sealed zone temperature and CO concentration proved that the proposed three-phase foam technology was effective on controlling the concealed goaf fire.     

碳氢/有机硅/低碳醇三元系泡沫及抑制煤自燃的效果分析

泡沫灭火剂是常用的火灾扑救方法之一,但常规泡沫灭火剂存在半衰期短,析液、聚并迅速而影响灭火效能的问题,基于火灾化学和活性剂技术,提出碳氢表面活性剂SDS、有机硅表面活性剂LS-99和低碳醇的三元系泡沫体系,并系统探究碳氢/有机硅/低碳醇的复配配比。通过表面张力、发泡高度、稳泡系数的大量测试,发现LS-99的临界胶束浓度为0.0083%。LS-99和SDS二元系在降低表面张力、提升发泡高度和稳泡系数方面具有良好的协同增效作用。在此基础上引入适量浓度的能够延缓泡沫析液、聚并的异丁醇,设计出了性能优良的碳氢/有机硅/低碳醇泡沫灭火剂。LS-99、SDS和异丁醇的质量分数为0.1%时,测试结果表明SDS/LS-99/醇三元系泡沫的发泡倍数可达52.5倍,25%析液时间可达210 s,300 s时的稳泡系数高达0.958,半衰期远超常规泡沫。煤自燃的灭火抑制实验表明,SDS/LS-99/醇三元系泡沫作用下,煤自燃各反应阶段的活化能相较于空气氛围均增大,反应难度增强;最大失重速率下降,反应剧烈程度减弱。初期吸热阶段的吸热量为78.3 J/g,大于空气氛围下煤氧复合的吸热量,吸热增幅高达2.16倍。放热阶段的放热量为1765.4 J/g,相较于空气氛围放热降幅达到15.15%,表明SDS/LS-99/醇三元系泡沫对煤自燃具有良好的灭火效果。     

低碳醇改性无氟泡沫的性能分析与扑灭油池火的实验研究

针对现有氟碳类泡沫灭火剂关键组分PFOS因国际环境公约出于环保和健康而限用,以及现有泡沫灭火剂还存在析液速度快而影响灭火能效等问题,在前人及团队探究无氟泡沫复配方案基础上,基于火灾化学理论与表面活性剂技术,遴选碳氢/有机硅表面活性剂(LS-99/SDS)为基剂,通过引入可改善气泡聚并的低碳醇(乙醇、正丙醇和异丁醇)调控泡沫的发泡倍数和25%析液时间等性能,开展含醇泡沫和无醇泡沫的灭火对比实验,考察低碳醇引入后的泡沫灭火能效。结果表明,引入适量浓度低碳醇可显著影响LS-99/SDS复配体系的发泡倍数和25%析液时间。相比乙醇和正丙醇,当异丁醇质量分数为0.1%时,可有效延缓含醇泡沫的析液进程和降低析液速率。通过灭火过程的火焰温度测定,发现含醇泡沫作用下10 cm和20 cm高度处的火焰最大降温速率为20.1℃·s^-1和11.2℃·s^-1,相较于无醇泡沫体系降温效果显著,降温增幅分别为39.58%和14.29%。含醇泡沫灭火剂相对于无醇泡沫灭火时间缩短了3.6 s,缩短幅度为37.5%。适量浓度的异丁醇引入到无氟泡沫体系中,可有效延缓泡沫析液进程,提高泡沫体系的发泡倍数及稳泡性能,为无氟泡沫的优化设计提供了一条新路径。建立了基于25%析液时间、平均析液速度、最大降温速率和灭火时间等综合指标的灭火效果考察方法,为泡沫灭火效能的实验室评价提供了参考依据。     

低碳醇改性无氟泡沫的性能分析与扑灭油池火的实验研究

针对现有氟碳类泡沫灭火剂关键组分PFOS因国际环境公约出于环保和健康而限用,以及现有泡沫灭火剂还存在析液速度快而影响灭火能效等问题,在前人及团队探究无氟泡沫复配方案基础上,基于火灾化学理论与表面活性剂技术,遴选碳氢/有机硅表面活性剂(LS-99/SDS)为基剂,通过引入可改善气泡聚并的低碳醇(乙醇、正丙醇和异丁醇)调控泡沫的发泡倍数和25%析液时间等性能,开展含醇泡沫和无醇泡沫的灭火对比实验,考察低碳醇引入后的泡沫灭火能效。结果表明,引入适量浓度低碳醇可显著影响LS-99/SDS复配体系的发泡倍数和25%析液时间。相比乙醇和正丙醇,当异丁醇质量分数为0.1%时,可有效延缓含醇泡沫的析液进程和降低析液速率。通过灭火过程的火焰温度测定,发现含醇泡沫作用下10 cm和20 cm高度处的火焰最大降温速率为20.1℃·s^-1和11.2℃·s^-1,相较于无醇泡沫体系降温效果显著,降温增幅分别为39.58%和14.29%。含醇泡沫灭火剂相对于无醇泡沫灭火时间缩短了3.6 s,缩短幅度为37.5%。适量浓度的异丁醇引入到无氟泡沫体系中,可有效延缓泡沫析液进程,提高泡沫体系的发泡倍数及稳泡性能,为无氟泡沫的优化设计提供了一条新路径。建立了基于25%析液时间、平均析液速度、最大降温速率和灭火时间等综合指标的灭火效果考察方法,为泡沫灭火效能的实验室评价提供了参考依据。     

EBM气溶胶灭火剂产物的潮解研究

EBM气溶胶灭火剂是一种新型高效灭火剂,其灭火效率高于哈龙类灭火剂。燃烧反应产生的白色烟雾对火灾具有抑制作用。白色烟雾中含有固体颗粒物质,这些颗粒物降落形成的残留物潮解后对金属材料及线路板等有腐蚀性。对气溶胶灭火剂颗粒物潮解进行研究,研究结果表明:空气的相对湿度是影响气溶胶颗粒物潮解的主要因素。     

Experimental assessment on LPG fire extinguishing properties of three chemical powders before and after milling action

The extinguishing performance of three dry chemical powders (DCPs) was investigated through a lab-scale suppression system for liquefied petroleum gas (LPG) fire. The magnesium hydroxide (Mg(OH)₂ ), sodium bicarbonate (NaHCO3 ), and commercial ABC − MAP powders are used to prepare two groups of samples: raw samples and milled samples. The effect of milling action on the properties of DCPs, such as the bulk density, microstructure, particle size, thermal decomposition, and the extinguishing performance, is analyzed. The density test revealed that the bulk density increased after milling, and the Mg(OH)₂ had a lower density than the other powders. The microstructure analysis showed that the milled powders had a smaller particle size and more regular shapes than raw powders. The thermal analysis demonstrated that the powder decomposition process was somewhat similar with a slight difference in initial decomposition temperature and degradation rate. The fire tests proved that the extinguishing efficacy greatly improved after the samples were milled. Moreover, the experiments indicated that the milled Mg(OH)₂ was superior in fire extinguishing to the other samples with shorter extinction time and less agent quantity consumed. Based on the results, it can be inferred that the milling action has a significant influence in enhancing the extinguishing mechanisms' efficiency of DCPs.     

The physicochemical and fire extinguishing performance of aqueous film-forming foams based on a class of short-chain fluorinated surfactants

Aqueous film-forming foams (AFFFs) are an important for fire extinguishing, and their key ingredient is fluorinated surfactant. In recent years, traditional long-chain fluorinated surfactants have been banned by most countries because of their persistence, bio-accumulation and toxicity. Therefore, increased attention has been paid to the research and development of short-chain fluorinated surfactants. As is well known, the introduction of hydrophilic or hydrophobic groups in a surfactant affects its surface activity, and therefore, the fire extinguishing performance of AFFFs. In this work, a series of short-chain fluorosurfactant-based AFFFs with different hydrophobic chain lengths were prepared. The physicochemical performance of mixed systems (fluorinated surfactant plus sodium hexanesulfonate), including surface activity, spreading ability, foam expansion, drainage time, and the fire extinguishing and burn-back performance of AFFFs were studied. The results show that the critical micelle concentration (CMC) and the surface tension (γ_CMC) at the CMC of mixed systems at 25°C are lower than 7.68 mmol/L and 16.51 mN/m, respectively. For mixed systems, the average spreading rate is more than 1.09 cm/s, the foam expansion is over 7.1, and the drainage time is greater than 3.28 min. The fire extinguishing time of AFFFs on fuels is less than 51 s while the burn-back time is more than 15.18 min. The results imply a potential application prospect of the short-chain fluorinated surfactants in AFFFs.     

空气泡沫灭火剂与石油化工火灾扑救

近年来频发的石油化工火灾为人们敲响了安全警钟,再一次引起人们对石油化工火灾问题的高度关注。文章介绍了在石油化工火灾中常用空气泡沫灭火剂的种类、灭火机理、适用范围、优点及不足,指出了空气泡沫灭火剂使用时的注意事项,并展望了其在石油化工火灾中的应用前景。     

浅析哈萨克斯坦石油化工装置消防设计

在石油化工装置的消防设计上,哈萨克斯坦与国内在设计规范及设计惯例等方面存在诸多差异。介绍了哈萨克斯坦石油化工装置消防规范,并从消防冷却水系统、泡沫灭火系统、蒸汽灭火系统、干粉灭火系统、自动气体灭火系统及消防用水量确定等方面,分析比较了哈萨克斯坦与国内石油化工装置消防设计规范及设计惯例的不同之处。     

Study on aqueous film-forming foam extinguishing agent based on fluorocarbon cationic–hydrocarbon anionic surfactants mixture system

Fluorocarbon surfactants were the main components of aqueous film-forming foam extinguishing agents (AFFF). Unfortunately, the widely used fluorocarbon surfactant perfluorooctane sulfonate (PFOS) was limited due to its toxicity, bioaccumulation and biodegradability. In this paper, an environmentally friendly quaternary ammonium cationic fluorocarbon surfactant with high surface activity and simple synthesis route was reported. The surface performance and aggregation behavior of the mixed solution of this fluorocarbon surfactant and sodium n-octyl sulfate were studied by means of surface tension meter and transmission electron microscope (TEM). The results showed that the synergistic effect of sodium n-octyl sulfate and this fluorocarbon surfactant was significant, and many vesicles could be observed in the mixed solution with the concentration of 0.1 mol/L under TEM. Subsequently, three environmental friendly AFFF formulations (F-1, F-2, F-3) were designed with the mixture of the fluorocarbon surfactant, sodium n-octyl sulfate and lauryl betaine BS-12 as foaming agent. Through its foam performance test, it could be seen that F-3 showed relatively excellent foam performance. The initial foam height h₀ was 70 mm, the 25% drainage time was 315 s, the extinguishing time was 28 s, and the burn-back time was 720 s. This kind of fire extinguishing agent had the potential of fire protection application.     

Fire suppressing performance of superfine potassium bicarbonate powder

Fire suppression effectiveness of a new kind of dry powder based on potassium bicarbonate was studied in this paper. The powder consisted of superfine potassium bicarbonate and some organic and inorganic additives, which was denoted as ‘K‐powder’. The physical and chemical characteristics of the K‐powder were characterized by a series of techniques of X‐ray diffraction, scanning electron microscopy, Fourier transforms infrared (FTIR) and thermal gravity analysis, etc. Performance of the new potassium‐based powder in fire suppression was studied by laboratory‐scale experiments, which exhibited much superior fire suppression efficacy than that of the commercial bicarbonate powder. Such improvements could be reasonably ascribed to the special chemical composition, microstructure and radiation effect on the mechanisms. The preparation, fire suppression and possible fire‐extinguishing mechanisms were studied in detail. Copyright © 2010 John Wiley & Sons, Ltd.     

AFFF1高浓度低冻点耐海水型水成膜泡沫灭火剂的研究

水成膜泡沫灭火剂是目前世界公认性能最佳的油类环保型灭火剂。针对目前该类产品大多为淡水型,存在耐寒、耐盐性较差的特点,文章详细阐述了可弥补这些不足的高浓度低冻点耐海水型水成膜泡沫灭火剂的技术原理,研究方法,应用优势,并对研究成果在技术、经济、社会效益方面进行了系统的分析,从而得出研究成果的使用价值比其他类型的水成膜泡沫灭火剂具有更高的综合竞争力与良好的应用前景。     

温湿度对EBM气溶胶灭火剂吸湿的影响

EBM气溶胶灭火剂是一种新型高效灭火剂,其灭火效率高于哈龙类灭火剂.燃烧反应产生的白色烟雾对火灾具有抑制作用.白色烟雾中含有固体颗粒物质,这些颗粒物降落形成残留物湿后的残留物对金属材料及线路板等有腐蚀性.研究了温湿度对气溶胶灭火剂吸湿的影响.研究结果表明:空气的相对湿度是影响气溶胶颗粒物吸湿的主要因素.     

某立式可燃液体储罐区消防灭火及冷却用水系统的设计

根据相关规范和业主要求,某立式可燃液体罐区采用固定式消防冷却水系统和低倍数泡沫灭火系统相结合的灭火系统。本设计通过对市场上实际灭火设备参数的选取,确定了泡沫比例混合装置的参数：并通过对罐区环状消防冷却水管分区布管的比较,选择最优的布管方式,该布管方式不仅避免了因设计取值较小造成消防储水量的不足而且减少了消防用水量。