共查询到20条相似文献,搜索用时 62 毫秒
1.
收集了2006年7月~2007年6月世界塑料工业的相关资料,介绍了2006~2007年世界塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍. 相似文献
2.
对国内外研究者在尿素合成反应的热力学、动力学、化学平衡及相平衡等方面的研究成果进行了总结和评价,提供了尿素合成反应的热力学、动力学数据和相图,提出了一些新理念. 相似文献
3.
4.
1 "夹层粘接"新工艺 "夹层粘接"是作者经多年研究、开发的一种新技术,在设备大修理工作中,对于严重摩擦磨损的机床导轨,采用独特的"夹层粘接"工艺,以夹布塑料为加厚层,填充F4为表面耐磨层,使机床导轨恢复了原有的精度和尺寸要求,缩短了修理时间,减轻了劳动强度,节约了修理费用,取得了显著的综合效益. 相似文献
5.
4.3 聚碳酸酯海关进出口分析 1999~2006年间PC进口量年均增长27.91%,比1998~2005年间PC进口量年均增长率31.27%下降3.36个百分点.国内产量偏低、市场需求巨大的现状进一步暴露.中国PC消费主要依靠进口,2006年中国产量仅占总消费量的10%上下.1999~2006年间PC进口量年均增长27.91%,比1998~2005年间Pc进口量年均增长率36.68%下降3.36个百分点.2006年初级形状的聚碳酸酯进口地有45个,主要进口地为泰国(占16.49%),其次为中国(12.86%)、新加坡(11.50%)、美国(10.95%)、日本(10.65%)、韩国(9.81%)、中国台湾省(9.50%)、西班牙(7.46%),八进口地进口量占总进口量的89.2%. 相似文献
6.
7.
1 对蒸骨制胶过程的认识 蒸骨制胶的过程也就是用蒸汽使骨料块在密封的锅内受热、受压,使骨质疏松,由生胶质热解转变为可溶解于热水的动物胶质(习惯上称之为"骨胶")的过程. 相似文献
8.
收集了2001年7月到2002年6月有关国外塑料工业的相关期刊资料,介绍了2001年到2002年国外塑料工业的发展情况,提供了世界各地域塑料原材料的产量及构成比,日本、美国、加拿大、德国、法国、比利时、墨西哥、芬兰、西班牙等国家的树脂产量、消费量及增长率,以及日本、西欧、北美等地区的不同品种塑料原料消费量和增长率统计.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、通用热固性树脂(酚醛、聚氨酯、不饱和树脂、环氧树脂)、特种工程塑料(聚苯硫醚、液晶聚合物、聚醚醚酮)不同品种的顺序,对树脂的产量、消费量及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等有关技术作了详细的介绍. 相似文献
9.
10.
在我的办公桌上,放着一把<井岗山八角楼>粉彩山水壶,每当我空闲时,总喜欢拿在手中把玩,这件小小的山水壶虽不能展现气势豪雄的大写意山水画面,也不可能真正达到烟云满纸的效果,但细腻的工笔,雅静的画意给人一种清心的感觉和享受. 相似文献
11.
12.
液流电池通常采用对角平推流流场,会形成电解液滞留区,造成电池局部浓差极化大,影响综合性能。鉴于此,提出了一种基于框架设计的流场优化方法,通过设计电极框架,可以得到“蛇形流道”和“平行流道”两类流场。以全钒液流电池为例,通过数学建模,研究了不同流场结构和参数对于多孔电极内电解液流动特性、电化学反应和温度变化特性的影响规律。计算结果与实验结果一致性良好,结果表明:电解液在“平行流场”内的流动均匀性比在“蛇形流场”内好,且不存在滞留区,同时在“平行流场”内浓差极化也较“蛇形流场”低;此外,对于同样的电极面积,在电极内部的“平行流道”越多,电解液的流速分布越均匀,反应特性越好。 相似文献
13.
14.
A study of air flow patterns by hot-wire anemometry is reported for a vortex chamber consisting of an upper cylindrical section 122 cm in diameter and 61 cm high and a conical bottom section 122 cm high. Quantitative data are presented for flow angles, profiles of mean tangential and axial velocities, and radial distributions of tangential and axial intensities of turbulence as a function of air entrance velocities of 1.6, 2.4 and 3.2 m/s, and axial distance from the top of the chamber. In general, the quantitative results confirm the theoretical predictions and the experimental trends reported in the literature. In particular, they fully support the conclusion that the flow pattern is relatively insensitive to the entrance volumetric flow rate. A generalized correlation is presented for the axial velocity distribution. Preliminary correlations are also presented for the tangential velocity distributions in the core and in the annular region of the vortex near the wall. These were found to be functions of the axial location and of the air entrance velocity. 相似文献
15.
A new concept of a sequence of plots is used for the separation of flow regimes in two-phase flow. The empirical correlations themselves are based on extensive tabulations of flow-type data from the AGA-API Data Bank. Provided these data and the tabulations are accurate, the accuracy of the proposed method is better than 5%. The accuracy for any separation can easily be obtained from the information given. The probability of being able to separate flow types by the various correlations was determined and used to select the best correlations. In actual use, there will be times when a complete separation cannot be made. However, one will know this and be able to say that the flow is one of two or, rarely, more types. 相似文献
16.
《Journal of aerosol science》2006,37(10):1174-1187
Flow behaviour in laminar aerosol flow tubes was investigated using a Computational Fluid Dynamics (CFD) model. Since these flow tubes are typically operated at low gas velocity, even small temperature gradients produce convection currents strong enough to interfere with laminar flow. This results in recirculation, causing the residence times of aerosol particles to be poorly defined. The situation is exacerbated when temperature inversions are present, or when the flow direction and temperature are changed simultaneously. We analyzed several characteristic flow tube configurations to define the range of experimental conditions that will ensure a laminar flow profile with minimal recirculation. For a laminar flow situation, we evaluated the extent of diffusion-controlled exchange between aerosol and the flow tube wall. 相似文献
17.
18.
19.
An experimental study was made of melt flow instabilities in extrusion of two-phase polymer systems. For the study, blends were prepared from two polymers: polystyrene (Dow Chemical STYRON 686) and high density polyethylene (Union Carbide DMDJ 4309). The experimental technique used in the present study was the same as that described in a previous paper by the authors. The study shows that there are abrupt increases both in exit pressure and in the recoverable shear strain (defined as the ratio of the exit pressure to shear stress) at the critical flow conditions. It has also been found that an addition of a small amount of high density polythylene (2.5 wt-% and 5.0 wt-%) increases the critical shear rate of polystyrene and hence results in a higher throughput rate before extrudate distortion is actually observed. This result is explained in terms of the independently determined melt elasticity of the two-phase systems investigated. 相似文献
20.
平行流热管换热器综合热管轴向高效换热和平行流换热器管外高效换热的优点,是一种新型的热管换热器。为了研究平行流热管工作机理及管内流动过程,搭建了平行流热管可视化实验台并对不同结构参数、不同加热功率和不同充注工质下的启动特性和传热传质规律进行了实验研究。实验结果表明:平行流热管工作机理复杂,并联管路内气柱和液柱在重力和不平衡压力的共同作用下进行互激振荡流动,并且管内出现泡状流、弹状流、环状流等多种流型,同时较高的加热功率和较大的管径会加剧工质在并联各管路之间的往复振荡,增加工质在蒸发段和冷凝段的扰动,提高热管的换热性能。 相似文献