Synthesis of biodegradable and biocompatible ABC triblock copolymers

A facile approach is offered to synthesize well‐defined amphiphilic ABC triblock copolymers composed of poly(ethylene glycol) monomethyl ether (MPEO) as A block, poly(L ‐lysine) (PLLys) as B block, and poly(ε‐caprolactone) (PCL) as C block by a combination of ring‐opening polymerization (ROP) and click reactions. The propargyl‐terminated poly(Z‐L ‐lysine)‐block‐poly(ε‐caprolactone) (MPEO‐PzLLys‐PCL) diblock copolymers were synthesized via the ring‐opening polymerization of N^ε‐carbobenzoxy‐L ‐lysine N‐carboxyanhydride (Z‐L ‐Lys NCA) in DMF at room temperature using propargyl amine as an initiator and the resulting amino‐terminated poly(Z‐L ‐lysine) then used in situ as a macroinitiator for the polymerization of ε‐caprolactone in the presence of stannous octoate as a catalyst. The triblock copolymers poly(ethylene glycol) monomethyl ether –block‐poly(Z‐L ‐lysine)‐block‐poly(ε‐caprolactone) (MPEO‐PzLLys‐PCL) were synthesized via the click reaction of the propargyl‐terminated PzLLys‐PCL and azido‐terminated poly(ethylene glycol) monomethyl ether (PEO‐N₃) in the presence of CuBr and 1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) catalyst system. After the removal of Z groups of L ‐lysine units, amphiphilic and biocompatible ABC triblock copolymers MPEO‐PLLys‐PCL were obtained. The structural characteristics of these ABC triblock copolymers and corresponding precursors were characterized by NMR, IR, and GPC. These results showed the click reaction was highly effective. Therefore, a facile approach is offered to synthesize amphiphilic and biocompatible ABC triblock copolymers consisting of polyether, polypeptide and polyester. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Semifluorinated ABA triblock copolymers: Synthesis,characterization, and amphiphilic properties

In this study a series of novel semifluorinated ABA triblock copolymers with different fluorinated segment lengths and different fluorocarbon side‐chain structures were synthesized via atom transfer radical polymerization (ATRP) and macroinitiator techniques. The macroinitiator, telechelic bromine terminated polystyrene, was obtained from bulk ATRP of styrene with α,α′‐dibromo‐p‐xylene as the initiator and cuprous bromide/α,α′‐bispyridine complex as the catalyst. The polymerization reactions of 2‐[(perfluorononenyl)oxy] ethyl methacrylate and ethylene glycol monomethacrylate monoperfluorooctanoate were initiated by the macroinitiator in the presence of additional catalyst. The characterization of the block copolymers was performed by gel permeation chromatography, ¹H‐NMR spectroscopy, and differential scanning calorimetry. The surface activities of the block copolymers in toluene were investigated with the Wilhelmy plate method. The solid surface energy of the block copolymers was determined by measurement of the contact angles. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2625–2633, 2002     

Synthesis of water-soluble ABC triblock copolymers containing polypeptide segments

This article describes a facile approach for the synthesis of water-soluble ABC triblock copolymers through a combination of atom transfer radical polymerization (ATRP) and click reactions. The bromine-terminated MPEO–PtBA–Br precursor was first prepared by ATRP, and converted into the azido-terminated precursor MPEO–PtBA–N₃ by a simple nucleophilic substitution. Then, MPEO–PtBA–PzLLys triblock copolymers were synthesized via the click reaction of MPEO–PtBA–N₃ and the propargyl-terminated poly(N^ε-carbobenzoxy-l-lysine)s (PzLLys). The water-soluble MPEO–PAA–PLLys ABC triblock copolymers were obtained from the hydrolysis process. The structures of these block copolymers were characterized by NMR, IR and GPC.     

Synthesis of poly[(decanoic acid)‐block‐styrene] diblock copolymers and their self‐assembly behavior in aqueous medium

Diblock copolymers, poly[(10‐hydroxydecanoic acid)‐block‐styrene] (PHDA‐b‐PSt), were synthesized by combining enzymatic condensation polymerization of HDA and atom transfer radical polymerization (ATRP) as of St PHDA was first obtained via enzymatic condensation polymerization catalyzed by Novozyme‐435. Subsequently, one terminus of the PHDA chains was modified by reaction with α‐bromopropionyl bromide and the other terminus was protected by chlorotrimethylsilane. The resulting monofunctional macroinitiator was used subsequently in ATRP of St using CuCl/2,2′‐bipyridine as the catalyst system to afford diblock copolymers including biodegradable PHDA blocks and well‐defined PSt blocks. Polymeric nanospheres were prepared by self‐assembly of the PHDA‐b‐PSt diblock copolymers in aqueous medium. Copyright © 2008 Society of Chemical Industry     

Synthesis of block copolymers with thermodynamically compatible chain segments: di‐ and triblock copolymers of polystyrene and poly(2,6‐dimethyl‐1,4‐phenylene oxide)

Mono‐ and bifunctional poly(phenylene oxide) (PPO) macroinitiators for atom transfer radical polymerization (ATRP) were prepared by esterification of mono‐ and bishydroxy telechelic PPO with 2‐bromoisobutyryl bromide. The macroinitiators were used for ATRP of styrene to give block copolymers with PPO and polystyrene (PS) segments, namely PPO‐block‐PS and PS‐block‐PPO‐block‐PS. Various ligands were studied in combination with CuBr as ATRP catalysts. Kinetic investigations revealed controlled polymerization processes for certain ligands and temperature ranges. Thermal analysis of the block copolymers by means of DSC revealed only one glass transition temperature as a result of the compatibility of the PS and PPO chain segments and the formation of a single phase; this glass transition temperature can be adjusted over a wide temperature range (ca 100–199 °C), depending on the composition of the block copolymer. Copyright © 2005 Society of Chemical Industry     

Synthesis of liquid crystalline–amorphous block copolymers by combination of CFRP and ATRP mechanisms

Block copolymers of liquid crystalline 6‐(4‐cyanobiphenyl‐4′‐oxy) hexyl acrylate (LC6) and styrene (St) were obtained by the combination of two different free‐radical polymerization mechanisms namely conventional free‐radical polymerization (CFRP) and atom transfer radical polymerization (ATRP). In the first part, thermosensitive azo alkyl halide, difunctional initiator (AI), was prepared and then used for CFRP of LC6 monomer. The obtained bromine‐ended difunctional liquid crystalline polymers (PLC6) were used as initiators in ATRP of St, in bulk in conjunction with CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as catalyst. In the second part, AI was firstly polymerized by CFRP in the presence of St and then the obtained difunctional bromine ended polystyrenes (PSt) were used as initiators in ATRP of LC6 in diphenyl ether solvent in conjuction with CuBr/PMDETA. The spectral, thermal, and optical measurements confirmed a fully controlled living polymerization, which results in formation of ABA‐type block copolymers with very narrow polydispersities. In both cases, blocks of the different chemical composition were segregated in the solid and melt phases. The mesophase transition temperatures of the liquid crystalline block were found to be very similar to those of the corresponding homopolymers. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Synthesis and characterization of block comb‐like copolymers P(A‐MPEO)‐block‐PSt

Amphiphilic block comb‐shaped copolymers, poly[poly(ethylene oxide) methyl ether acrylate]‐block‐polystyrene [P(A‐MPEO)‐block‐PSt] with PSt as a handle, were successfully synthesized via a macromonomer technique. The reaction of MPEO with acryloyl chloride yielded a macromonomer, A‐MPEO. The macroinitiator PSt capped with the dithiobenzoate group (PSt‐SC(S)Ph) was prepared by reversible addition–fragmentation transfer (RAFT) polymerization of styrene in the presence of benzyl dithiobenzoate, and used as macroinitiator in the controlled radical block copolymerization of A‐MPEO at room temperature under ⁶⁰Co irradiation. After the unreacted macromonomer A‐MPEO had been removed by washing with hot saturated saline water, block comb‐shaped copolymers were obtained. Their structure was characterized by ¹H NMR spectroscopy and gel permeation chromatography. The phase transition and self‐assembling behaviour were investigated by atomic force microscope and differential scanning calorimetry. Copyright © 2004 Society of Chemical Industry     

AB‐ and ABC‐type di‐ and triblock copolymers of poly[styrene‐block‐(ε‐caprolactone)] and poly[styrene‐block‐(ε‐caprolactone)‐block‐lactide]: synthesis,characterization and thermal studies

Polystyrene terminated with benzyl alcohol units was employed as a macroinitiator for ring‐opening polymerization of ε‐caprolactone and L ‐lactide to yield AB‐ and ABC‐type block copolymers. Even though there are many reports on the diblock copolymers of poly(styrene‐block‐lactide) and poly(styrene‐block‐lactone), this is the first report on the poly(styrene‐block‐lactone‐block‐lactide) triblock copolymer consisting of two semicrystalline and degradable segments. The triblock copolymers exhibited twin melting behavior in differential scanning calorimetry (DSC) analysis with thermal transitions corresponding to each of the lactone and lactide blocks. The block derived from ε‐caprolactone also showed crystallization transitions upon cooling from the melt. In the DSC analysis, one of the triblock copolymers showed an exothermic transition well above the melting temperature upon cooling. Thermogravimetric analysis of these block copolymers showed a two‐step degradation curve for the diblock copolymer and a three‐step degradation for the triblock copolymer with each of the degradation steps associated with each segment of the block copolymers. The present study shows that it is possible to make pure triblock copolymers with two semicrystalline segments which also consist of degradable blocks. Copyright © 2009 Society of Chemical Industry     

Graft copolymerization of methylmethacrylate with N‐substituted maleimide‐styrene copolymer by ATRP

Atom transfer radical polymerization (ATRP) was employed to prepare graft copolymers having poly(MBr)‐alt‐poly(St) copolymer as backbone and poly(methyl methacrylate) (PMMA) as branches to obtain heat resistant graft copolymers. The macroinitiator was prepared by copolymerization of bromine functionalized maleimide (MBr) with styrene (St). The polymerization of MMA was initiated by poly(MBr)‐alt‐poly(St) carrying bromine groups as macroinitiator in the presence of copper bromide (CuBr) and bipyridine (bpy) at 110°C. Both macroinitiator and graft copolymers were characterized by ¹H NMR, GPC, DSC, and TGA. The ATRP graft copolymerization was supported by an increase in the molecular weight (MW) of the graft copolymers as compared to that of the macroinitiator and also by their monomodal MW distribution. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Synthesis and characterization of PMMA‐b‐PBMA block copolymers by atom transfer radical polymerization

The synthesis of diblock copolymers using atom transfer radical polymerization, ATRP, of n‐butyl methacrylate, BMA, and methyl methacrylate, MMA, is reported. These copolymers were prepared from 2‐bromoisobutyryl‐terminated macroinitiators of poly(MMA) and poly(BMA), using copper chloride, CuCl,/N,N,N′,N″,N″‐pentamethyldiethylenetretramine, PMDETA, as the catalyst system, at 100°C in bulk and in benzonitrile solution. The block copolymers were characterized by means of size‐exclusion chromatography, SEC, and ¹H‐NMR spectroscopy. The SEC analysis of the synthesized diblock copolymers confirmed important differences in the molecular weight control depending on the reaction medium (solvent effect) and the chemical structure of the macroinitiator used. In addition, differential scanning calorimetry, (DSC) measurements were performed, showing for all the copolymers a phase separation. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2683–2691, 2002