基于无约束迭代学习的间歇生产过程优化控制

针对基于迭代学习控制的间歇过程优化控制算法难以进行收敛性分析的难题,本文基于数据驱动的神经模糊模型提出一种新颖的间歇过程无约束迭代学习控制方法,通过调节因子的变化去除了约束条件,使控制轨迹在批次轴上收敛,并创新性地对优化问题的收敛性给出了严格的数学证明。在理论研究的基础上,将本文提出的算法用于间歇连续反应釜的终点质量控制研究,仿真结果验证了本文算法的有效性和实用价值,为间歇过程的优化控制提供了一条新途径。     

一种间歇过程产品质量迭代学习控制策略

针对基于迭代学习控制的间歇过程产品质量优化控制算法难以进行收敛性分析的难题,以数据驱动的神经模糊模型为基础,提出一种新颖间歇过程的产品质量迭代学习控制方法。通过在优化算法中加入了新的约束条件,改变了最优解的搜索空间范围,从而使产品质量在批次轴上收敛,并创新性地对优化问题的收敛性给出了严格的数学证明。在理论研究的基础上,将提出的算法用于间歇连续反应釜的终点质量控制研究,仿真结果验证了本文算法的有效性和实用价值,为间歇过程的优化控制提供了一条新途径。     

一类间歇生产过程的迭代学习控制算法及其收敛性分析

针对基于迭代学习控制的间歇过程产品质量优化控制算法难以进行收敛性分析的难题,并且考虑到实际生产中存在外部干扰和不确定因素的影响,本文对间歇过程模型参数动态更新问题进行了分析,建立了间歇生产过程产品质量的神经模糊(NF)预测模型,提出了一种新颖的批次轴参数自适应调节算法。在此基础上,构造了一种基于数据驱动的间歇生产过程产品质量迭代学习控制算法,并对优化问题的收敛性给出了严格的数学证明。最后,将本文提出的算法用于一类典型的间歇过程终点质量控制研究,仿真结果验证了本文算法的有效性和实用价值,为间歇过程的优化控制提供了一条新途径。     

基于广义预测控制的间歇生产迭代优化控制

针对间歇生产,提出了一种基于广义预测控制的批次迭代优化控制策略--BGPC,在间歇过程中引入批次间优化的思想,将迭代学习控制ILC和广义预测控制GPC相结合,在GPC实时结构参数辨识的基础上利用前面批次的模型预测误差修正当前批次的模型预测值.该算法能够有效地克服模型失配、扰动和系统参数变化等情况.文章最后以一个数值例子和间歇反应器为对象进行仿真试验,验证了该算法是有效的.     

基于KPLS模型的间歇过程产品质量控制

针对间歇过程所具有的非线性特性,提出了一种基于核偏最小二乘(KPLS)模型的最终产品质量控制策略。利用初始条件、批次展开后的过程数据以及最终产品质量建立了间歇过程的KPLS模型;采用基于主成分分析(PCA)映射的预估方法对未知的过程数据进行补充,实现了最终产品质量的在线预测。为了解决最终产品质量的控制,利用T2统计量确定KPLS模型的适用范围,并作为约束引入产品质量控制问题,提高控制策略的可行性;采用粒子群优化(PSO)算法实现了优化问题的高效求解。仿真结果表明,与基于偏最小二乘(PLS)模型的控制策略相比,所提出的方法具有更高的预测精度,且能有效解决产品质量控制中出现的各种问题。     

间歇过程的批间自优化控制

针对间歇过程的实时优化问题,提出了一种基于最优性条件近似法的批间自优化控制策略。首先获取标称工作点的最优输入轨迹形态,将其参数化为少量决策变量,简化问题复杂度。然后根据参数化后的决策变量得到批间优化的最优性条件,并建立批次终端可测变量和最优性条件之间的回归模型,将其作为被控变量进行批间跟踪控制。对一个间歇反应器进行了仿真研究,结果表明方法能有效实现间歇过程的批间自优化控制。     

基于MKPLS和SQP方法的间歇过程迭代优化控制

采用多向核偏最小二乘（MKPLS）方法建立间歇过程的模型并进行操作条件的优化。由于存在模型失配和未知扰动，基于MKPLS模型的最优控制轨迹在实际对象上往往难以实现最优的产品质量指标。本文利用间歇过程批次间的重复特性与序贯二次规划（SQP）优化算法中迭代计算的相似特点，提出了一种基于MKPLS模型的批次间优化调整策略，使得经过逐步优化调整得到的控制轨迹作用于实际对象时，可以得到更优的质量指标。该方法的有效性在苯乙烯聚合反应器和乙醇流加发酵过程的仿真对象上得到了验证。     

间歇过程优化与先进控制综述

总结近年来间歇过程操作优化和设计优化中出现的各种新方法,以及在优化问题求解中使用的各种先进控制策略,反映间歇过程最优化和先进控制的最新研究方向。重点介绍间歇过程单元的操作优化和控制,兼顾在线稳态优化和动态优化。对新的研究方法提出展望。     

间歇过程控制标准化

本文介绍了间歇过程控制标准ＳＰ８８，以便从事间歇过程的人员了解该领域的最新国际动态。ＳＰ８８强调间歇过程控制的体系和横模块化。它定义了适用于间歇过程控制的专业术语，控制功能和控制模型，这对于推动间歇过程控制自动化具有重要意义。     

基于多阶段多向核熵成分分析的间歇过程故障检测方法

针对间歇过程的非线性、多阶段特性,提出一种基于多阶段多向核熵成分分析（multistage-MKECA,MsMKECA）的故障检测方法。针对间歇过程的多阶段特性,建立一种时序核熵主元关联度的矩阵相似性阶段划分方法,实现对间歇生产过程的多阶段划分;针对传统批次展开方式在线监控需要预估批次未来值的缺陷,进一步引入一种批次-变量三维数据展开方式建立每个阶段的MKECA非线性统计模型,实现对间歇过程的分阶段监控。最后对盘尼西林发酵过程开展仿真研究,结果表明所提方法能够比传统MKECA方法更为快速地进行故障检测。     

DYNAMIC OPTIMAL CONTROL OF BATCH CRYSTALLIZATION PROCESSES

This work applies an on-line optimal control strategy developed by Zhang (2001) to two cooling batch crystallization processes. The algorithm initially finds the optimal crystallizer temperature and subsequently uses a feedback control system in order to achieve the desired final product quality of the crystals expressed in terms of the final crystal size distribution. In both batch processes, it is shown that the on-line optimal control approach provides better final product quality as compared with a simplified optimal cooling policy. The improvement is especially noticeable in the presence of plant/model mismatch or errors in the initial conditions.     

BATCH-TO-BATCH OPTIMAL CONTROL OF BATCH PROCESSES BASED ON RECURSIVELY UPDATED NONLINEAR PARTIAL LEAST SQUARES MODELS

A batch-to-batch optimal control approach for batch processes based on batch-wise updated nonlinear partial least squares (NLPLS) models is presented in this article. To overcome the difficulty in developing mechanistic models for batch/semi-batch processes, a NLPLS model is developed to predict the final product quality from the batch control profile. Mismatch between the NLPLS model and the actual plant often exists due to low-quality training data or variations in process operating conditions. Thus, the optimal control profile calculated from a fixed NLPLS model may not be optimal when applied to the actual plant. To address this problem, a recursive nonlinear PLS (RNPLS) algorithm is proposed to update the NLPLS model using the information newly obtained after each batch run. The proposed algorithm is computationally efficient in that it updates the model using the current model parameters and data from the current batch. Then the new optimal control profile is recalculated from the updated model and implemented on the next batch. The procedure is repeated from batch to batch and, usually after several batches, the control profile will converge to the optimal one. The effectiveness of this method is demonstrated on a simulated batch polymerization process. Simulation results show that the proposed method achieves good performance, and the optimization with the proposed NLPLS model is more effective and stable than that with a batch-wise updated linear PLS model.     

BATCH-TO-BATCH OPTIMAL CONTROL OF BATCH PROCESSES BASED ON RECURSIVELY UPDATED NONLINEAR PARTIAL LEAST SQUARES MODELS

A batch-to-batch optimal control approach for batch processes based on batch-wise updated nonlinear partial least squares (NLPLS) models is presented in this article. To overcome the difficulty in developing mechanistic models for batch/semi-batch processes, a NLPLS model is developed to predict the final product quality from the batch control profile. Mismatch between the NLPLS model and the actual plant often exists due to low-quality training data or variations in process operating conditions. Thus, the optimal control profile calculated from a fixed NLPLS model may not be optimal when applied to the actual plant. To address this problem, a recursive nonlinear PLS (RNPLS) algorithm is proposed to update the NLPLS model using the information newly obtained after each batch run. The proposed algorithm is computationally efficient in that it updates the model using the current model parameters and data from the current batch. Then the new optimal control profile is recalculated from the updated model and implemented on the next batch. The procedure is repeated from batch to batch and, usually after several batches, the control profile will converge to the optimal one. The effectiveness of this method is demonstrated on a simulated batch polymerization process. Simulation results show that the proposed method achieves good performance, and the optimization with the proposed NLPLS model is more effective and stable than that with a batch-wise updated linear PLS model.     

Batch-to-batch iterative learning control and within-batch on-line control for end-point qualities using MPLS-based dEWMA

A new feedback batch control strategy based on multiway partial least squares (MPLS) model and dEWMA (double exponentially weighted moving average) control for the end-point product quality system is proposed in this paper. It combines batch-to-batch (BtB) control with on-line tracking control within a batch. In the BtB operation, MPLS-based dEWMA control is done by applying feedback from the final output quality of the batch process. It utilizes the information from the current batch to improve quality for the next batch. The advantage of MPLS is to extract the strongest relationship between the input and the output variables in the reduced space of the latent variables model rather than in the real space of the highly dimensional manipulated variable trajectories. It is particularly useful for inherent noise suppression. Then the optimal manipulated variable trajectories in the score space without decoupler design can be directly and individually applied to each control loop under the MPLS modeling structure. Then the dEWMA controller can be applied to each SISO control loop respectively to address the model errors gradually reduced from model-plant mismatches and unmeasured disturbances. In on-line tracking control within a batch, the MPLS-based dEWMA control strategy is developed to explore the possible adjustments of the future input trajectories. It fixes up the disturbances just in time instead of until the next batch run and maintains the product specification when this batch is finished. To demonstrate the potential applications of the proposed design method, a typical batch reactor with processes of different dynamics is applied. Comparisons between MPLS-based dEWMA BtB control and MPLS-based dEWMA within-batch control are also made.     

Predictive control of particle size distribution in particulate processes

In this work, we focus on the development and application of predictive-based strategies for control of particle size distribution (PSD) in continuous and batch particulate processes described by population balance models (PBMs). The control algorithms are designed on the basis of reduced-order models, utilize measurements of principle moments of the PSD, and are tailored to address different control objectives for the continuous and batch processes. For continuous particulate processes, we develop a hybrid predictive control strategy to stabilize a continuous crystallizer at an open-loop unstable steady-state. The hybrid predictive control strategy employs logic-based switching between model predictive control (MPC) and a fall-back bounded controller with a well-defined stability region. The strategy is shown to provide a safety net for the implementation of MPC algorithms with guaranteed stability closed-loop region. For batch particulate processes, the control objective is to achieve a final PSD with desired characteristics subject to both manipulated input and product quality constraints. An optimization-based predictive control strategy that incorporates these constraints explicitly in the controller design is formulated and applied to a seeded batch crystallizer. The strategy is shown to be able to reduce the total volume of the fines by 13.4% compared to a linear cooling strategy, and is shown to be robust with respect to modeling errors.     

Product quality improvement of batch crystallizers by a batch-to-batch optimization and nonlinear control approach

Batch crystallization is one of the widely used processes for separation and purification in many chemical industries. Dynamic optimization of such a process has recently shown the improvement of final product quality in term of a crystal size distribution (CSD) by determining an optimal operating policy. However, under the presence of unknown or uncertain model parameters, the desired product quality may not be achieved when the calculated optimal control profile is implemented. In this study, a batch-to-batch optimization strategy is proposed for the estimation of uncertain kinetic parameters in the batch crystallization process, choosing the seeded batch crystallizer of potassium sulfate as a case study. The information of the CSD obtained at the end of batch run is employed in such an optimization-based estimation. The updated kinetic parameters are used to modify an optimal operating temperature policy of a crystallizer for a subsequent operation. This optimal temperature policy is then employed as new reference for a temperature controller which is based on a generic model control algorithm to control the crystallizer in a new batch run.     

在线自适应批次过程监视的双滑动窗口MPCA方法

Online monitoring of chemical process performance is extremely important to ensure the safety of a chemical plant and consistently high quality of products. Multivariate statistical process control has found wide applications in process performance analysis, monitoring and fault diagnosis using existing rich historical database. In this paper, we propose a simple and straight forward multivariate statistical modeling based on a moving window MPCA （multiway principal component analysis） model along the time and batch axis for adaptive monitoring the progress of batch processes in real-time. It is an extension to minimum window MPCA and traditional MPCA. The moving window MPCA along the batch axis can copy seamlessly with variable run length and does not need to estimate any deviations of the ongoing batch from the average trajectories. It replaces an invariant fixed-model monitoring approach with adaptive updating model data structure within batch-to-batch, which overcomes the changing operation condition and slows time-varying behaviors of industrial processes. The software based on moving window MPCA has been successfully applied to the industrial polymerization reactor of polyvinyl chloride （PVC） process in the Jinxi Chemical Company of China since 1999.     

The Effect of Batch Quality on Glass Melting

Glass-melting processes and the effect of batch quality on these processes are considered. An analysis is performed on the basis of a heat-engineering study of large-capacity glass-melting furnaces and mathematical modeling. Admissible single-impulse and multi-impulse deviations from a prescribed batch formula are estimated.