La_(0.8)Sr_(0.2)MnO_3的燃烧法制备及对HMX热分解的影响(英文)

Perovskite-type La0.8Sr0.2MnO3 was prepared by stearic acid gel combustion method. The obtained powders were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scaning electron micrograph (SEM) and X-ray photoelectron spectroscopy (XPS) techniques. The catalytic activity of La0.8Sr0.2MnO3 was investigated on thermal decomposition of octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) by thermal gravity-differential scanning calorimetry (TG-DSC) techniques. The experimental results show that La0.8Sr0.2MnO3 is an effective catalyst for HMX thermal decomposition. The surface-adsorbed species such as H2O, OH&;#61485; and adsorbed oxygen (Oad) could result in an advance in the onset temperature of HMX thermal decompo-sition. The mixture system of Mn3+ and Mn4+ ions and lattice oxygen could play key roles for the increase of the decomposition heat of HMX because these exothermic reactions could be catalyzed by La0.8Sr0.2MnO3 between CO and NOx (from the thermal decom-position of HMX) and the oxidation reaction of CO. According to the previous researches and our results, perovskite-type La0.8Sr0.2MnO3 may be used as a novel catalyst or modifier for nitrate ester plasticized polyether (NEPE) propellant.     

用含夹带剂丙酮的超临界CO2快速膨胀法制备灰黄霉素的微细颗粒

Griseofulvin (GF) is an antifungal drug whose pharmaceutical activity can be improved by reducing particle size. In this study the rapid expansion of supercritical solution (RESS) was employed to micronize GF.Carbon dioxide with cosolvent acetone was chosen as a supercritical mixed solvent. The solubility of GF in super-critical CO2 with cosolvent acetone was measured using a dynamic apparatus at pressures between 12 and 32 MPa,temperatures at 313, 323 and 333 K and cosolvent concentration at 1.5, 3.0, 4.5 and 6.0% (by mole). The effect of pre-expansion pressure, extraction temperature, spraying distance, nozzle size and concentration of cosolvent on the precipitated particles was investigated. The results show that the mean particle size of griseofulvin precipitated by RESS was less than 1.2μm. An increase in pre-expansion pressure, extraction temperature, spraying distance and concentration of cosolvent resulted in a decrease in particle size under the operating condition studied. With the decrease of nozzle diameter the particle size reduces. The crystallinity and melting point of the original material and the processed particle by RESS were tested by X-ray diffraction (XRD) and differential scanning calorimetry (DSC).No evident modification in the crystal habit was found under the experimental conditions tested. The morphology of particles precipitated was analyzed bY scanning electron microscopy (SEM).     

Anaerobic biodegradation of RDX and HMX with different co-substrates☆

Simulated wastewater of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) was treated under anaerobic conditions with co-substrates such as ammonium chloride, dex-trose, sodium acetic, sodium nitrate and sulfate. The results showed that with nitrogen compounds such as ammonium chloride added as co-substrate, no significant change was observed, indicating that the molar ratio of N/C for RDX and HMX is sufficient for biodegradation. With the addition of dextrose and acetate to the system, biodegradation efficiency was enhanced greatly. For example, with dextrose as the co-substrate, degradation efficiency of 99.1%and 98.5%was achieved for RDX and HMX, respectively, after treatment for 7 days. When so-dium acetic was used as the co-substrate, the enhancement of degradation percentage was similar, but was not as high as that with dextrose, indicating the selectivity of RDX and HMX to co-substrate during anaerobic degrada-tion. With sodium nitrate as the co-substrate, the degradation efficiency of RDX or HMX decreased with the increase of salt concentration. Sodium sulfate has no significant effect on the biodegradation of RDX and HMX. A wel-selected co-substrate should be employed in applications for degradation of RDX and HMX wastewaters.     

低浓度草酸水溶液的电导研究

Oxalic acid is a weak and unsymmetrical bi-basic acid. There exist dissociation and association equilibria among the species in aqueous solution. The molar conductivity of the solution is the sum of the ionic contributions.Based on this idea, a new prediction equation of ionic conductivity was proposed at low concentration. The molar conductivities of the solution and its relevant ions were calculated respectively. The results obtained were in good agreement with those from experiments and the Quint-Viallard equation.     

孔隙尺寸、盐度和气体组分对水合物相平衡的影响(英文)

An experimental device was set up to study the hydrate formation conditions. Effects of pore size, salinity, and gas composition on the formation and dissociation of hydrates were investigated. The result indicates that the induction time for the formation of hydrates in porous media is shorter than that in pure water. The decrease in pore size, by decreasing the size of glass beads, increases the equilibrium pressure when the salinity and temperature are kept constant. In addition, higher salinity causes higher equilibrium pressure when the pore size and temperature are kept constant. It is found that the effects of pore size and salinity on the hydrate equilibrium are quite different. At lower methane concentration, the hydrate equilibrium is achieved at lower pressure and higher temperature.     

超临界反溶剂过程制备槲皮素超细颗粒

Supercritical antisolvent (SAS) process is a recently developed technology to produce micro- and nanoparticles. This paper presents a continuous apparatus to conduct experiment of SAS process. With the apparatus,the effects of pressure, temperature and flow ratio of CO2 to the solution on the shape and size of particles are studied for the quercetin-ethanol-CO2 system. Spherical quercetin microparticles with diameters ranging form i μm to 6μm can be obtained while ethanol is used as organic solvent. The most effective fact on the shape and size of particles is pressure, the next is temperature and the last is the flow ratio of CO2 to solution.     

Process development for producing a food-grade glucose solution from rice straws

In this paper, processes for producing a food-grade glucose solution through enzymatic hydrolysis of celluloserich solids obtained from rice straws are presented. The rice straws were pretreated by acid-catalyzed steam explosion, and the reaction efficiency, toxicity control, and process economic feasibility were studied. Mass transfer resistance to the hydrolysis reaction was reduced by grinding with glass beads. A higher glucose concentration could be obtained by feeding more cellulose in the hydrolysis reaction; however, this also resulted in the production of undesired byproducts. Thus, a soaking process for the cellulose solids in water was developed to effectively reduce the generation of byproducts in the hydrolysis reaction. The resulting food-grade glucose solution can provide 414 kilocalories per liter, and could be used during a food-shortage crisis in the future.The current production cost is estimated to be 0.82 USD·L~(-1).     

SEBS三嵌段共聚物膜的形态研究

Surface morphologies of the films of poly [styrene-b-（ethylene-co-butene）-b-styrene] （SEBS） have been studied by using tapping-mode atomic force microscopy （TM-AFM）. The films of block copolymer were prepared both by spin-coating on mica and by solvent-casting on different solution surfaces. For spin-coating samples, the effect of solution concentration, solvent, and annealing temperature are investigated. It is shown that changing the concentration of the solution makes no difference on the morphology of the film of the block copolymer. The microstructures are quite stable during thermal annealing; only the size of the domains changes toward the equilibrium configuration. However, solvent annealing can notably change the microstructures. When different selective solvents are used for film spin-coating, different morphologies can be obtained and explained by the different solubility parameters of the solvents. As expected, significant different morphologies in the top and the bottom surfaces of the casting films were observed. The images of the top surfaces reveal cylinder microdomains, while those of the bottom surfaces were spherical morphologies.     

应用激光成像系统研究非牛顿流体中的气泡生成

A self-developed laser image measurement system was established to study the behavior of bubble formation at a single orifice in non-Newtonian polyacrylamide （PAAm） solutions. Images of bubbles were captured by a CCD camera and volumes of bubbles were digitally analyzed online. The effects of rheological property of PAAm solution, orifice, reservoir, and gas flowrate on bubble formation were studied experimentally. It is found that the volume of bubble increases with the concentration of PAAm solution, the diameter of the orifice, and the gas flowrate, respectively, whereas little effect of reservoir is observed in experiments.     

P507溶于煤油作为载体的一种新型分散组合液膜对Eu3+的分离

The separation of Eu3+ is studied with a dispersion combined liquid membrane (DCLM), in which polyvinylidene fluoride membrane (PVDF) is used as the liquid membrane support, dispersion solution containing HCl solution as the stripping solution, and 2-ethyl hexyl phosphonic acid-mono-2-ethyl hexyl ester (P507) dissolved in kerosene as the membrane solution. The effects of pH value, initial concentration of Eu3+ and different ionic strength in the feed phase, volume ratio of membrane solution to stripping solution, concentration of HCl solution, concentration of carrier, different stripping agents in the dispersion phase on the separation are investigated. The optimum condition for separation of Eu3+ is that concentration of HCl solution is 4.0 mol•L1, concentration of carrier is 0.16 mol•L1, and volume ratio of membrane solution to stripping solution is 30︰30 in the dispersion phase, and pH value is 4.2 in the feed phase. The ionic strength has no significant effect on separation of Eu3+. Under the optimum condition, when the initial concentration of Eu3+ is 0.8×104 mol•L1, the separation percentage of Eu3+ is 95.3% during the separation time of 130 min. The kinetic equation is developed in terms of the law of mass diffusion and the theory of interface chemistry. The diffusion coefficient of Eu3+ in the membrane and the thickness of diffusion layer between feed phase and membrane phase are obtained and their values are 1.48×107 m2•s1 and 36.6 μm, respectively. The results obtained are in good agreement with literature data.     

Solvent effect on particle morphology in recrystallization of HMX (cyclotetramethylenetetranitramine) using supercritical carbon dioxide as antisolvent

Supercritical fluid processes have gained great attention as a new and environmentally benign method of preparing the microparticles of energetic materials like explosives and propellants. In this work, HMX (cyclotetramethylenetetranitramine) was selected as a target explosive. The microparticle formation of HMX using supercritical antisolvent (SAS) recrystallization process was performed and the effect of organic solvent on the size and morphology of prepared particles was observed. The organic solvents used in this work were dimethylsulfoxide (DMSO), N,N-dimethylformamide (DMF), cyclohexanone, acetone, and N-methyl pyrrolidone (NMP).     

Study of the Elaboration of HMX and HMX Composites by the Spray Flash Evaporation Process

The Spray Flash Evaporation (SFE) process invented and developed at the NS3E laboratory allows obtaining different nanosized explosives (TNT, RDX, CL‐20…). This process is based on the very fast evaporation of the solvent due to the drastic modification of pressure and temperature leading to the crystallization of the molecules present in solution into nanometric or submicrometric particles. Here, we show the possibility to prepare pure HMX (Octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocine) or HMX based composites at the nanoscale using this process. This study mainly focuses on the size, morphology and crystallographic phases obtained for HMX and HMX/TNT composites depending on the experimental conditions (temperature, pressure, solution concentration…) used during the elaboration. For this purpose, the results obtained from scanning electron microscopy, X‐ray diffraction and Raman spectroscopy are discussed.     

HMX分级工艺研究

为了制备不同粒径级的奥克托今（HMX）晶体,采用二甲基亚砜（DMSO）重结晶粒度分级,通过控制稀释速度,搅拌和温度等条件,进行HMX粒度分级。通过光学显微镜分析了重结晶HMX的晶体形貌,用不同目的筛子对重结晶后的HMX晶体分级。结果表明：通过控制结晶条件,可直接制得6种粒度的HMX,粒度和质量均符合美军标MIL,H-45444B要求。     

Crystallization of HMX-Particles by Using the Gas Anti-Solvent-Process

A ternary system consisting of cylcotetramethylene tetranitramine (octogen, HMX) as the solute, acetone respectively γ-butyrolactone as solvents and carbon dioxide as the anti-solvent was used to investigate the formation of fine particles with the GAS-process as well as the influence of the solvents upon the particle morphology under the same operating conditions. The precipitated particles were examined by infrared radiation spectroscopy (IR), laser light diffraction and light-optical microscopy. The results show that octogen with a narrow particle size distribution was obtained. The crystals are of the same modification as the raw material and of hight purity. The modification and the particle size are influenced by the solvent used for the recrystallization.     

奥克托今结晶工艺对其撞击感度的影响研究

以结晶机理为指导,硝酸为溶剂,水为稀释剂,采用溶剂-非溶剂法重结晶奥克托今,用立式落锤仪测定其撞击感度。通过工艺条件的改变,寻求奥克托今撞击感度与结晶工艺的关系。实验结果表明,奥克托今晶体的撞击感度与其结晶工艺密切相关。实验较佳工艺条件,在(30±1)℃下,用98%的硝酸35 mL溶解5.0 g奥克托今,加水速率为0.67 mL/min,搅拌速率为220 r/min,测其撞击感度,计算的特性落高值为22.91 cm。     

Na_2·cis-BNT和G_2·trans-BNT与几种含能材料相互作用的热分析

采用差示扫描量热法(DSC)并结合热重-微商热重法(TG-DTG)研究了双(3-(5-硝基-1,2,4-三唑))的钠盐(Na_2·cis-BNT)和胍盐(G_2·trans-BNT)与黑索金(RDX)、奥克托今(HMX)及3,3-双叠氮甲基氧丁环-聚叠氮缩水甘油醚共聚物(BAMO-GAP)的相容性,及混合物体系的热行为。初步探索了样品制备方法 (研磨法与溶剂法)对混合物体系相容性的影响。结果表明,对Na_2·cis-BNT、G_2·trans-BNT采用干法和湿法制备得到的混合体系相容性结果有一定差异。用干法制备二元体系时,Na_2·cis-BNT/RDX体系相容,Na_2·cis-BNT/HMX体系为轻度敏感,适合短期使用;而G_2·trans-BNT/RDX体系为敏感,不适合使用,G_2·trans-BNT/HMX体系为不相容;用湿法制备二元体系时,Na_2·cis-BNT与RDX、HMX、BAMO-GAP的混合物及G_2·trans-BNT与BAMO-GAP的混合物为相容,而混合物G_2·trans-BNT/RDX、G_2·trans-BNT/HMX为敏感,不适合使用。非均相过程分解的HMX混合体系相容性会受混合方式的影响,因此,由DSC法测定相容性时,制样的混合方法需要明确说明,并应当结合其他方法作最后判定。     

β-环糊精与RDX,HMX的包合研究

通过测定溶液的紫外吸收光谱,得到了β-环糊精(β-CD)与RDX,HMX的最佳包合比为1∶1;采用饱和溶液法对β-环糊精与含能材料RDX,HMX进行包合,得到了β-环糊精与RDX、HMX的固体包合产物;通过测定固体产品的X-射线衍射,证明了包合物的形成。     

Evaluation of Ultrasonic Treatment for the Size Reduction of HNS and HMX in Comparison to Solvent‐Antisolvent Crystallization

The paper presents and compares two methods for the synthesis of fine particles of the high explosives HNS and HMX by ultrasonic treatment and solvent/antisolvent crystallization. The effect of ultrasonic treatment on the particle size of explosives was studied by varying the amplitude and frequency of ultrasonication for different time periods using an ultrasonic probe and an ultrasonic bath. Solvent/antisolvent recrystallization was performed by varying the process parameters including stirring rate, antisolvent temperature etc. In addition to FT‐IR spectroscopy and thermal analysis by TGA/DSC; the particle size and shape of fine powders of the explosives HMX and HNS were determined using particle size analysis and scanning electron microscopy (SEM). Ultrasonic treatment of the probes resulted in the finer grains of HMX compared to solvent‐antisolvent crystallization. However in the case of HNS, solvent‐antisolvent crystallization produced finer particles compared to ultrasonication.     

Sonogashina偶联法合成芳基末端炔的工艺改进

以对二溴苯(Ⅰa)、1,3,5-三溴苯(Ⅰb)和2-甲基-3-丁炔-2-醇(Ⅱ)为原料,在PdC l2、PPh3和CuI的催化作用下进行Sonogash ina偶联反应,偶联产物在KOH作用下发生消去反应,分别得到对溴苯乙炔(Ⅳa)、对二乙炔基苯(Ⅳa′)、1,3,5-三乙炔基苯(Ⅳb)。研究发现,在合成中间体1,4-二(3-羟基-3-甲基-1-丁炔)苯时,选择n(Ⅰa)∶n(Ⅱ)=1∶3较为适合;共催化剂n(CuI)∶n(Ⅱ)≈0.01时产率较高;水对偶联反应无影响。粗产物经硫酸铜溶液萃取、硅胶过滤、重结晶、真空升华进行分离提纯得到纯产品。3种产物的收率分别为75%、72%、70%。产物用IR、GC-MS、1HNMR进行了确证。     

超临界流体GAS重结晶过程的过饱和度与产品的颗粒形态

超临界流体ＧＡＳ重结晶过程的过饱和度与产品的颗粒形态蔡建国周展云（华东理工大学化学工程研究所，上海２００２３７）关键词超临界流体重结晶颗粒形态微细颗粒胆红素二甲基亚砜１前言超临界流体重结晶是近十年发展起来的有关超临界流体应用的新技术［１］。超临界流...