Study on the photocatalytic degradation of trichlorfon in suspension of titanium dioxide

In this paper, the photocatalytic degradation of trichlorfon, an organophosphorous pesticide, was studied by using TiO₂ as a photocatalyst. The effects of various parameters, such as the amount of the photocatalyst, illumination time, reaction temperature, electron acceptors, metal ions, anions, and initial pH value on the photocatalytic degradation of trichlorfon were investigated. The best conditions for the photocatalytic degradation of trichlorfon were obtained. The results show that the optimum amount of the photocatalyst used is 8.0 g L^− 1. The photodegradation efficiency of trichlorfon increases with the increase of the illumination time or reaction temperature. The photodegradation efficiency of trichlorfon is increased rapidly by adding a small amount of H₂O₂, K₂S₂O₈, KBrO₃, Fe³⁺ and Cu²⁺, however, with the addition of Na⁺, K⁺, Mg²⁺, Ca²⁺, Zn²⁺, Co²⁺ and Ni²⁺, or with the addition of trace amount of SO₄²⁻, Cl⁻, Br⁻, there are no obvious effects on the photocatalytic degradation reactions. Alkaline mediums are favorable for the photocatalytic degradation of trichlorfon. The possible roles of the additives on the reactions and the possible mechanisms of effect were also discussed.     

Na+/H+ Exchangers Involve in Regulating the pH-Sensitive Ion Channels in Mouse Sperm

Sperm-specific K⁺ ion channel (KSper) and Ca²⁺ ion channel (CatSper), whose elimination causes male infertility in mice, determine the membrane potential and Ca²⁺ influx, respectively. KSper and CatSper can be activated by cytosolic alkalization, which occurs during sperm going through the alkaline environment of the female reproductive tract. However, which intracellular pH (pH_i) regulator functionally couples to the activation of KSper/CatSper remains obscure. Although Na⁺/H⁺ exchangers (NHEs) have been implicated to mediate pH_i in sperm, there is a lack of direct evidence confirming the functional coupling between NHEs and KSper/CatSper. Here, 5-(N,N-dimethyl)-amiloride (DMA), an NHEs inhibitor that firstly proved not to affect KSper/CatSper directly, was chosen to examine NHEs function on KSper/CatSper in mouse sperm. The results of patch clamping recordings showed that, when extracellular pH was at the physiological level of 7.4, DMA application caused KSper inhibition and the depolarization of membrane potential when pipette solutions were not pH-buffered. In contrast, these effects were minimized when pipette solutions were pH-buffered, indicating that they solely resulted from pH_i acidification caused by NHEs inhibition. Similarly, DMA treatment reduced CatSper current and intracellular Ca²⁺, effects also dependent on the buffer capacity of pH in pipette solutions. The impairment of sperm motility was also observed after DMA incubation. These results manifested that NHEs activity is coupled to the activation of KSper/CatSper under physiological conditions.     

Permissive Modulation of Sphingosine-1-Phosphate-Enhanced Intracellular Calcium on BKCa Channel of Chromaffin Cells

Sphingosine-1-phosphate (S1P), is a signaling sphingolipid which acts as a bioactive lipid mediator. We assessed whether S1P had multiplex effects in regulating the large-conductance Ca²⁺-activated K⁺ channel (BK_Ca) in catecholamine-secreting chromaffin cells. Using multiple patch-clamp modes, Ca²⁺ imaging, and computational modeling, we evaluated the effects of S1P on the Ca²⁺-activated K⁺ currents (I_K(Ca)) in bovine adrenal chromaffin cells and in a pheochromocytoma cell line (PC12). In outside-out patches, the open probability of BK_Ca channel was reduced with a mean-closed time increment, but without a conductance change in response to a low-concentration S1P (1 µM). The intracellular Ca²⁺ concentration (Ca_i) was elevated in response to a high-dose (10 µM) but not low-dose of S1P. The single-channel activity of BK_Ca was also enhanced by S1P (10 µM) in the cell-attached recording of chromaffin cells. In the whole-cell voltage-clamp, a low-dose S1P (1 µM) suppressed I_K(Ca), whereas a high-dose S1P (10 µM) produced a biphasic response in the amplitude of I_K(Ca), i.e., an initial decrease followed by a sustained increase. The S1P-induced I_K(Ca) enhancement was abolished by BAPTA. Current-clamp studies showed that S1P (1 µM) increased the action potential (AP) firing. Simulation data revealed that the decreased BK_Ca conductance leads to increased AP firings in a modeling chromaffin cell. Over a similar dosage range, S1P (1 µM) inhibited I_K(Ca) and the permissive role of S1P on the BK_Ca activity was also effectively observed in the PC12 cell system. The S1P-mediated I_K(Ca) stimulation may result from the elevated Ca_i, whereas the inhibition of BK_Ca activity by S1P appears to be direct. By the differentiated tailoring BK_Ca channel function, S1P can modulate stimulus-secretion coupling in chromaffin cells.     

Physiological Roles of the Rapidly Activated Delayed Rectifier K+ Current in Adult Mouse Heart Primary Pacemaker Activity

Robust, spontaneous pacemaker activity originating in the sinoatrial node (SAN) of the heart is essential for cardiovascular function. Anatomical, electrophysiological, and molecular methods as well as mathematical modeling approaches have quite thoroughly characterized the transmembrane fluxes of Na⁺, K⁺ and Ca²⁺ that produce SAN action potentials (AP) and ‘pacemaker depolarizations’ in a number of different in vitro adult mammalian heart preparations. Possible ionic mechanisms that are responsible for SAN primary pacemaker activity are described in terms of: (i) a Ca²⁺-regulated mechanism based on a requirement for phasic release of Ca²⁺ from intracellular stores and activation of an inward current-mediated by Na⁺/Ca²⁺ exchange; (ii) time- and voltage-dependent activation of Na⁺ or Ca²⁺ currents, as well as a cyclic nucleotide-activated current, I_f; and/or (iii) a combination of (i) and (ii). Electrophysiological studies of single spontaneously active SAN myocytes in both adult mouse and rabbit hearts consistently reveal significant expression of a rapidly activating time- and voltage-dependent K⁺ current, often denoted I_Kr, that is selectively expressed in the leading or primary pacemaker region of the adult mouse SAN. The main goal of the present study was to examine by combined experimental and simulation approaches the functional or physiological roles of this K⁺ current in the pacemaker activity. Our patch clamp data of mouse SAN myocytes on the effects of a pharmacological blocker, E4031, revealed that a rapidly activating K⁺ current is essential for action potential (AP) repolarization, and its deactivation during the pacemaker potential contributes a small but significant component to the pacemaker depolarization. Mathematical simulations using a murine SAN AP model confirm that well known biophysical properties of a delayed rectifier K⁺ current can contribute to its role in generating spontaneous myogenic activity.     

Synthesis and transport properties in La2−xAxMo2O9−δ (A = Ca, Sr, Ba, K) series

The La_2−xA_xMo₂O_9−δ (A = Ca²⁺, Sr²⁺, Ba²⁺ and K⁺) series has been synthesised as nanocrystalline materials via a modification of the freeze-drying method. The resulting materials have been characterised by X-ray diffraction (XRD), thermal analysis (TG/DTA, DSC), scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM). The high-temperature β-polymorph is stabilised for dopant content x > 0.01. The nanocrystalline powders were used to obtain dense ceramic materials with optimised microstructure and relative density >95%. The overall conductivity determined by impedance spectroscopy depends on both the ionic radius and dopant content. The conductivity decreases slightly as the dopant content increases in addition a maximum conductivity value was found for Sr²⁺ substitution, which show an ionic radii slightly higher than La³⁺ (e.g. 0.08 S cm⁻¹ for La₂Mo₂O₉ and 0.06 S cm⁻¹ for La_1.9Sr_0.1Mo₂O_9−δ at 973 K). The creation of extrinsic vacancies upon substitution results in a wider stability range under reducing conditions and prevents amorphisation, although the stability is not enhanced significantly when compared to samples with higher tungsten content. These materials present high thermal expansion coefficients in the range of (13-16) × 10⁻⁶ K⁻¹ between room temperature and 753 K and (18-20) × 10⁻⁶ K⁻¹ above 823 K. The ionic transport numbers determined by a modified emf method remain above 0.98 under an oxygen partial pressure gradient of O₂/air and decreases substantially under wet 5% H₂-Ar/air when approaching to the degradation temperature above 973 K due to an increase of the electronic contribution to the overall conductivity.     

A new rhodamine-based single molecule multianalyte (Cu, Hg) sensor and its application in the biological system

A new single molecule multianalyte sensor, vanillic aldehyde rhodamine 6G hydrazone has been designed for the selective detection of Cu²⁺ and Hg²⁺ ions. UV/Vis spectroscopy indicates that the sensor is a good chromogenic chemosensor for Cu²⁺ in 1:99 (v/v) ethanol-water media. Whereas, other ions, such as Li⁺, Na⁺, Mg²⁺, K⁺, Ca²⁺, Cr³⁺, Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Zn²⁺, Ag⁺, Cd²⁺, Ba²⁺, Hg²⁺ and Pb²⁺ failed to generate a distinct response. Fluorescence spectral data reveals that the sensor is an excellent fluorescent chemosensor for Hg²⁺ in aqueous ethanol solution and with no fluorescent response toward other ions. The spectroscopic behavior of the sensor in living cells indicated that it can be used for the detection of Cu²⁺ and Hg²⁺ in environmental and biological systems. Mechanisms for the high selectivity of the sensor to Cu²⁺ and Hg²⁺ are discussed.     

Effectiveness of Columbianadin,a Bioactive Coumarin Derivative,in Perturbing Transient and Persistent INa

Columbianadin (CBN) is a bioactive coumarin-type compound with various biological activities. However, the action of CBN on the ionic mechanism remains largely uncertain, albeit it was reported to inhibit voltage-gated Ca²⁺ current or to modulate TRP-channel activity. In this study, whole-cell patch-clamp current recordings were undertaken to explore the modifications of CBN or other related compounds on ionic currents in excitable cells (e.g., pituitary GH₃ cells and HL-1 atrial cardiomyocytes). GH₃-cell exposure to CBN differentially decreased peak or late component of voltage-gated Na⁺ current (I_Na) with effective IC₅₀ of 14.7 or 2.8 µM, respectively. The inactivation time course of I_Na activated by short depolarization became fastened in the presence of CBN with estimated K_D value of 3.15 µM. The peak I_Na diminished by 10 µM CBN was further suppressed by subsequent addition of either sesamin (10 µM), ranolazine (10 µM), or tetrodotoxin (1 µM), but it was reversed by 10 µM tefluthrin (Tef); however, further application of 10 µM nimodipine failed to alter CBN-mediated inhibition of I_Na. CBN (10 µM) shifted the midpoint of inactivation curve of I_Na to the leftward direction. The CBN-mediated inhibition of peak I_Na exhibited tonic and use-dependent characteristics. Using triangular ramp pulse, the hysteresis of persistent I_Na enhanced by Tef was noticed, and the behavior was attenuated by subsequent addition of CBN. The delayed-rectifier or erg-mediated K⁺ current was mildly inhibited by 10 µM CBN, while it also slightly inhibited the amplitude of hyperpolarization-activated cation current. In HL-1 atrial cardiomyocytes, CBN inhibited peak I_Na and raised the inactivation rate of the current; moreover, further application of 10 µM Tef attenuated CBN-mediated decrease in I_Na. Collectively, this study provides an important yet unidentified finding revealing that CBN modifies I_Na in electrically excitable cells.     

Li1.6Mn1.6O4/PVDF多孔膜的制备及提锂性能

自制锂离子筛前驱体Li_1.6Mn_1.6O₄，并将Li_1.6Mn_1.6O₄粒子与高分子树脂PVDF杂化制膜，研究了膜经稀盐酸抽锂后对锂的吸附性能以及多次吸附与脱附性能等。结果表明，膜M-10-55[Li]采用0.5 mol·L^-1 HCl溶液抽锂约2 h锂的脱出基本达到平衡，Li⁺的洗脱率在95%左右，锰的溶损率为3.5%左右。抽锂后得M-10-55[H]对富锂溶液中锂的吸附约12 h达平衡，对锂的吸附容量较高为41 mg·g^-1，在第5次吸附时对锂的提取量为35 mg·g^-1左右。相比于Na⁺、K⁺、Mg²⁺、Ca²⁺，该膜对Li⁺表现出较好的选择性，对于从海水、盐湖卤水等液态锂资源中提取锂有很大的开发潜力。     

Enhanced luminescence of novel Ca3B2O6:Dy phosphors by Li-codoping for LED applications

The Ca_3−xB₂O₆:xDy³⁺ (0.0 ≤ x ≤ 0.105) and Ca_2.95−yDy_0.05B₂O₆:yLi⁺ (0 ≤ y ≤ 0.34) phosphors were synthesized at 1100 °C in air by solid-state reaction route. The as-synthesized phosphors were characterized by X-ray powder diffraction (XRD), scanning electron microscope (SEM), photoluminescence excitation (PLE) and photoluminescence (PL) spectra. The PLE spectra show the excitation peaks from 300 to 400 nm is due to the 4f-4f transitions of Dy³⁺. This mercury-free excitation is useful for solid state lighting and light-emitting diodes (LEDs). The emission of Dy³⁺ ions upon 350 nm excitation is observed at 480 nm (blue) due to the ⁴F_9/2 → ⁶H_15/2 transitions, 575 nm (yellow) due to ⁴F_9/2 → ⁶H_13/2 transitions and a weak 660 nm (red) due to ⁴F_9/2 → ⁶H_11/2 emissions, respectively. The optimal PL intensity of the Ca_3−xB₂O₆:xDy³⁺ phosphors is found to be x = 0.05. Moreover, the PL results from Ca_2.95−yDy_0.05B₂O₆:yLi⁺ phosphors show that Dy³⁺ emissions can be enhanced with the increasing codopant Li⁺ content till y = 0.22. By simulation of white light, the CIE of the investigated phosphors can be tuned by varying the content of Li⁺ ions, and the optimal CIE value (0.300, 0.298) is realized when the content of Li⁺ ions is y = 0.22. All the results imply that the Ca_2.95−yDy_0.05B₂O₆:yLi⁺ phosphors could be potentially used as white LEDs.     

Preparation of synthetic rutile and metal-doped LiFePO4 from ilmenite

The synthetic rutile and metal-doped LiFePO₄ are prepared from the high-titanium residue and iron-rich lixivium, which are obtained from the ilmenite by a mechanical activation and leaching process. ICP results show that the rutile contains 92.01% TiO₂, 1.59% Fe₂O₃, 0.034% MnO₂ and 0.60% (MgO + CaO), which meet the requirement of the titanium dioxide chlorination process. The results also reveal that small amounts of Al³⁺, Ca²⁺ and Ti⁴⁺ precipitate in the FePO₄·xH₂O precursor. XRD and Rietveld-refine results show that the metal-doped LiFePO₄ is single olivine-type phase and well crystallized, and Ti⁴⁺ occupy M1 site, Ca²⁺ occupy M2 site and Al³⁺ occupy both sites, which indicates the formation of cation-deficient solid solution. The sample exhibits a capacity of 123 mAh g⁻¹ at 5C rate, and retains 94.3% of the capacity after 100 cycles.     

Solvent Extraction of Li+ using Organophosphorus Ligands in the Presence of Ammonia

In this work, the selective extraction of Li⁺ with the aid of organophosphorus ligands (H-OP) including phenylphosphonic (H-PHO), phenylphosphinic (H-PHI) and bis(2-ethylhexyl) phosphoric (H-BIS) acids in the absence and presence of ammonia was studied. Adding NH₃ to the aqueous phase resulted in significant improvement in the % extraction of Li⁺ into the organic phase containing H-OP ligands. The highest % extraction values obtained in the case of H-PHO, H-PHI, and H-BIS were 43.2%, 45.7%, and 90.0%, respectively. Two mechanisms were inferred; the first was that the extraction equilibrium reaction of LiCl + H-OP ? Li-OP + HCl shifted forward due the reaction of the produced HCl with NH₃. The second mechanism was that the Li⁺/NH₄⁺ exchange of NH₄-OP (produced from the reaction of H-OP with NH₃) was easier than Li⁺/H⁺ exchange of H-OP itself. Competitive extraction experiments indicated that the selectivity factors of Li⁺ over Na⁺ and K⁺ were strongly dependent on the concentration of H-OP ligands which suggested that aggregation of ligand molecules via hydrogen bonding is the limiting factor for selectivity.     

The promotional effect of Cr on catalytic activity of Pt/ZSM-35 for H2-SCR in excess oxygen

Selective catalytic reduction of NO by hydrogen was studied over Cr modified Pt/ZSM-35 catalysts. The preparation process greatly influenced catalytic activity and sample prepared by co-impregnation method exhibits the best activity. In situ DRIFT studies revealed that on Pt–Cr/ZSM-35, (1) new Pt-NO^δ+ and NO species adsorbed on Pt were detected upon NO + O₂ adsorption; (2) much more ammonia species were formed under reaction condition. Cr addition not only enhanced the adsorption of NO_x but also promoted the formation of surface NH₄⁺ species, which should be the origin of promotional effect of Cr on Pt/ZSM-35 for H₂-SCR reaction.     

Heavy metals in cement phases: on the solubility of Mg, Cd, Pb and Ba in Ca3Al2O6

The compounds formed when the divalent cations Mg²⁺, Cd²⁺, Ba²⁺ and Pb²⁺ are present during the preparation of Ca₃Al₂O₆ have been studied using X-ray microanalysis and diffraction methods. The smaller Mg cations are found to partially substitute for Ca²⁺, and structural refinements show that Mg preferentially occupies the smaller six-coordinate sites in Ca_3−xMg_xAl₂O₆. When Ba is present, it preferentially occupies the larger eight- and nine-coordinate sites. X-ray microanalysis suggests that Pb and Cd are lost from the samples during the preparation process. The diffraction patterns show a small decrease in the lattice parameters, suggesting that a defect structure of the type Ca_3−x(vac)_xAl₂O₆ is formed. The distribution of products formed on hydration of the doped Ca_3−xM_xAl₂O₆ is found to be very different than that observed for the undoped material.     

Midazolam’s Effects on Delayed-Rectifier K+ Current and Intermediate-Conductance Ca2+-Activated K+ Channel in Jurkat T-lymphocytes

Midazolam (MDZ) could affect lymphocyte immune functions. However, the influence of MDZ on cell’s K⁺ currents has never been investigated. Thus, in the present study, the effects of MDZ on Jurkat T lymphocytes were studied using the patch-clamp technique. Results showed that MDZ suppressed the amplitude of delayed-rectifier K⁺ current (I_K(DR)) in concentration-, time-, and state-dependent manners. The IC₅₀ for MDZ-mediated reduction of I_K(DR) density was 5.87 μM. Increasing MDZ concentration raised the rate of current-density inactivation and its inhibitory action on I_K(DR) density was estimated with a dissociation constant of 5.14 μM. In addition, the inactivation curve of I_K(DR) associated with MDZ was shifted to a hyperpolarized potential with no change on the slope factor. MDZ-induced inhibition of I_K(DR) was not reversed by flumazenil. In addition, the activity of intermediate-conductance Ca²⁺-activated K⁺ (IK_Ca) channels was suppressed by MDZ. Furthermore, inhibition by MDZ on both I_K(DR) and IK_Ca-channel activity appeared to be independent from GABAA receptors and affected immune-regulating cytokine expression in LPS/PMA-treated human T lymphocytes. In conclusion, MDZ suppressed current density of I_K(DR) in concentration-, time-, and state-dependent manners in Jurkat T-lymphocytes and affected immune-regulating cytokine expression in LPS/PMA-treated human T lymphocytes.     

(R,R)-salen/salan-based polymer fluorescence sensors for Zn detection

(R,R)-salen-based polymer fluorescence sensor P-1 could be synthesized by the polymerization of 5,5′-(isoquinoline-5,8-diylbis(ethyne-2,1-diyl))-bis(3-tert-butyl-2-hydroxybenzaldehyde) (M-1) with (R,R)-1,2-diaminocyclohexane (M-2) via nucleophilic addition-elimination reaction, and (R,R)-salan-based polymer sensor P-2 could be obtained by the reduction reaction of P-1 with NaBH₄. The fluorescence response behaviors of two chiral polymers P-1 and P-2 on Zn²⁺ were investigated by fluorescence spectra. The fluorescence intensities of P-1 and P-2 can exhibit gradual enhancement upon addition of Zn²⁺. Compared with other cations, such as Na⁺, K⁺, Mg²⁺, Ca²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Ag⁺, Cd²⁺, Cr³⁺ and Pb²⁺, Zn²⁺ can lead to the pronounced fluorescence enhancement as high as 22.8-fold for P-1 and 3.75-fold for P-2, respectively. The results show that P-1 and P-2 incorporating (R,R)-salen/salan moieties as receptors in the polymer main chain backbone can exhibit high sensitivity and selectivity for Zn²⁺ detection.     

Cationic substitution in tricalcium aluminate

Cubic and orthorhombic crystals of tricalcium aluminate doped with Na₂O, Fe₂O₃ and SiO₂ were prepared and examined using an electron probe microanalyzer. The cationic ratios based on six oxygen atoms were derived from the oxide compositions. These data, together with those in previous studies for clinker aluminates containing Mg²⁺ and K⁺, provided excellent correlations between Al+Fe and Si (Al+Fe=2.001−1.03Si) and Ca+Mg and Na+K+Si [Ca+Mg=3.006−0.51(Na+K+Si)]. The chemical variation that is constrained by these equations is well accounted for by the general formula (Na,K)_2x(Ca,Mg)_3−x−y[(Al,Fe)_1−ySi_y]₂O₆, where x is the amount of Ca substituted by Na and K (0≤x<0.158), and y is the amount of Al substituted by Si (0≤y<0.136). The crystal system changed from cubic to orthorhombic with increasing x value. The substitution of Si and Fe for Al extended the solid solution range of the orthorhombic phase to lower values of x, while its effect on the solid solution range of the cubic phase was reversed.     

Luminescent properties of a novel afterglow phosphor Sr3Al2O5Cl2:Eu,Ce

A series of Eu²⁺ and Ce³⁺ doped/co-doped Sr₃Al₂O₅Cl₂ afterglow phosphors that presented various bright colors were successfully synthesized via high temperature solid state reaction. The structure and luminescence properties of the obtained samples were characterized by X-ray powder diffraction (XRD), photoluminescence (PL) spectra and decay curves as well as the thermoluminescence (TL) glow curves. The XRD results showed that all the phase could be indexed to the orthorhombic structure with the space group P2₁2₁2₁. After being exposed to a 254 nm or 365 nm mercury lamp, blue/yellow-orange afterglow emissions with broad bands peaking around 620 nm/435 nm, which were ascribed to the characteristic 4f⁶5d–4f⁷/5d¹–4f¹ transitions of Eu²⁺/Ce³⁺, could be observed in phosphors of Sr₃Al₂O₅Cl₂:Eu²⁺/Sr₃Al₂O₅Cl₂:Ce³⁺, respectively. Because of the overlap spectral range between the Sr₃Al₂O₅Cl₂:Eu²⁺ and Sr₃Al₂O₅Cl₂:Ce³⁺ phosphors, the energy transfer (ET) from Ce³⁺ to Eu²⁺ occurred. The related ET process was discussed in detail. Moreover, the incorporation of Ce³⁺ could significantly prolong the afterglow duration of Sr₃Al₂O₅Cl₂:Eu²⁺ phosphor, which was due to the increase of trap concentration. Consequently, 6 h of the afterglow duration could be observed in Sr₃Al₂O₅Cl₂:1.0%Eu²⁺, 0.5%Ce³⁺ sample, exhibiting much longer than that of Sr₃Al₂O₅Cl₂: 1.0%Eu²⁺ (3 h). From the afterglow decay curves and the fitting results, the optimal concentration of Ce³⁺ for the enhanced afterglow property was experimentally determined to be 0.5%.     

Impact of the cation field strength on physical properties and structures of alkali and alkaline-earth borosilicate glasses

The impact of the cation field strength (CFS) of the glass network-modifier cations on the structure and properties of borosilicate glasses (BS) were examined for a large ensemble of mixed-cation (R/2)M₍₂₎O–(R/2)Na₂O–B₂O₃–KSiO₂ glasses with M⁺ ={Li⁺, Na⁺, K⁺, Rb⁺} and M²⁺ ={Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺} from four series of {K, R} combinations of K = n(SiO₂)/n(B₂O₃) = {2.0, 4.0} and R =[n(M₍₂₎O) ?+ ?n(Na₂O)]/n(B₂O₃) = {0.75, 2.1}. Combined with results from La³⁺ bearing glasses enabled the probing of physical-property variations across a wide CFS range, encompassing the glass transition temperature (T_g), density, molar volume and compactness, as well as the hardness (H) and Young's modulus (E). We discuss the inferred composition–structure/CFS–property relationships. Each of T_g, H, and E revealed a non-linear dependence against the CFS and a strong T_g/H correlation, where each property is maximized for the largest alkaline-earth metal cations, i.e., Sr²⁺ and Ba²⁺, along with the high-CFS La³⁺ species. The ¹¹B MAS NMR-derived fractional BO₄ populations decreased linearly with the average M^z+/Na⁺ CFS within both K–0.75 glass branches, whereas the NBO-rich K–2.1 glasses manifested more complex trends. Comparisons with results from RM₂O–B₂O₃–KSiO₂ glasses suggested no significant “mixed alkali effect”.     

An In Situ ESR Study of Pd/H-ZSM-5 Interaction with Different Adsorbents

In situ ESR at 120–473 K permits to monitor formation of transient paramagnetic ions/complexes (isolated Pd⁺ sites; Pd⁺/H₂O; Pd⁺/C₆H₆) upon interaction of isolated Pd²⁺ cations stabilized by the H-ZSM-5 matrix with different organic compounds and gas mixtures (NO, O₂, H₂O, H₂, propene, benzene). The in situ study provides insight into the elementary steps of redox processes on isolated Pd species in H-ZSM-5 zeolite under realistic conditions. Adsorbed water stabilizes the transient paramagnetic complex and decreases the rate of Pd²⁺ to Pd⁰ reduction by H₂. Strong bonding of NO _x ligands to Pd²⁺ species suppresses the reduction of Pd(II) ions. Sorption of benzene on preoxidized Pd²⁺/HZSM-5 is accompanied by an easy formation of organic cation-radicals and of a Pd⁺/benzene complex, the paramagnetic Pd⁺/benzene structure indicating a surprisingly high resistance to further reduction to Pd⁰. Illumination of the Pd/HZSM-5 by UV-visible light causes no measurable change in the redox properties of the catalyst.