Nanodiamond particles/reduced graphene oxide composites as efficient supercapacitor electrodes

The paper reports on the preparation of reduced graphene oxide (rGO) modified with nanodiamond particles composites by a simple solution phase and their use as efficient electrode in electrochemical supercapacitors. The technique relies on heating aqueous solutions of graphene oxide (GO) and nanodiamond particles (NDs) at different ratios at 100 °C for 48 h. The morphological properties, chemical composition and electrochemical behavior of the resulting rGO/NDs nanocomposites were investigated using UV/vis spectrometry, Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, transmission electron microscopy (TEM) and electrochemical means. The electrochemical performance, including the capacitive behavior of the rGO/NDs composites were investigated by cyclic voltammetry and galvanostatic charge/discharge curves at 1 and 2 A g⁻¹ in 1 M H₂SO₄. The rGO/ND matrix with 10/1 ratio displayed the best performance with a specific capacitance of 186 ± 10 F g⁻¹ and excellent cycling stability.     

Effect of oxygen functional groups of reduced graphene oxide on the mechanical and thermal properties of polypropylene nanocomposites

Reduced graphene oxide (rGO) with various surface structures was prepared by reducing graphene oxide (GO) with hydrazine hydrate (N₂H₄), sodium borohydride (NaBH₄) and l ‐ascorbic acid, respectively. The resulting rGO were used to fabricate rGO/polypropylene (PP) nanocomposites by a melt‐blending method. The surface structure of rGO as well as multifunctional properties of rGO/PP nanocomposites were thoroughly investigated. It was shown that rGO with highest C/O ratio could be obtained by reducing GO with N₂H₄. The crystallization behaviors, tensile strength, thermal conductivity and thermal stability of rGO/PP nanocomposites were significantly improved with the increase of C/O ratio of rGO. For example, with only 1 phr (parts per hundred PP) rGO reduced by N₂H₄, the degree of crystallinity, tensile strength, maximum heat decomposition temperature and thermal conductivity of PP nanocomposite were increased by 6.2%, 20.5%, 48.0 °C and 54.5%, respectively, compared with those of pure PP. Moreover, the thermal degradation kinetics indicated that the decomposition activation energy of rGO/PP nanocomposites could be enhanced by adding rGO with higher C/O ratio. © 2018 Society of Chemical Industry     

Development of photo-anodes based on strontium doped zinc oxide-reduced graphene oxide nanocomposites for improving performance of dye-sensitized solar cells

The goal of this study was to create highly efficient dye-sensitized solar cells (DSSCs) using strontium doped zinc oxide-reduced graphene oxide (Sr-doped ZnO/rGO) nanocomposites. As photo-anodes of DSSCs, ZnO, ZnO/rGO (with weight percent rGO in composites: 0, 0.01, 0.1, 0.5, and 1 wt%) and Sr-doped ZnO/rGO (with Zn_1-xSr_xO nanoparticle stoichiometry: x = 0, 0.02, 0.04, 0.06 and 0.08) nanocomposites were designed and characterized. AFM, FESEM, XRD, EDS, XPS, PL, and FTIR analyses were used to investigate the morphology and structure properties of prepared nanocomposites. UV–vis spectroscopy and photo-electrochemical measurements were used to investigate the efficiency of prepared photo-anodes. The efficiency (η) and short-circuit photocurrent density (JSC) of DSSCs based on Zn_0.92Sr_0.08O/rGO nanocomposite were 7.98 % and 18.4 mA cm⁻², respectively. The results showed that doping Sr on ZnO/rGO nanocomposites resulted in a wide bandgap energy and increased the values of η, J_SC, IPCE, and photo-anode electron transportability. These findings suggest that Sr-doped ZnO/rGO nanocomposites can provide a novel approach for increasing photo-electrochemical activity in ZnO-based DSSCs.     

A highly selective carbon paste electrode enhanced by Cu-encapsulated poly(amidoamine) for the simultaneous detection of organic and inorganic contaminants

In this study, a copper/poly(amidoamine)/multi-walled carbon nanotube/reduced graphene oxide (Cu/PAMAM/MWCNT/rGO) complex was synthesized for fabricating an electrochemical sensor to simultaneously detect nitrate and nitrite ions as inorganic contaminants, and 4-chlorophenol (4-CP) and 1,2,5,8 tetrahydroxy anthraquinone (THA) as organic pollutants. The prepared Cu/PAMAM/MWCNT/rGO electrode was characterized using scanning electron microscopy (SEM), Fourier-transform infrared (FT-IR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and electrochemical impedance spectroscopy (EIS). Cyclic voltammetry (CV) was performed to investigate the influence of the pH of the solution, concentration of anions, and scan rate on the analytical performance of the electrodes. The simultaneous determination of nitrite/nitrate ions using a Cu/PAMAM/MWCNT/rGO electrode showed sensitivities of 8.030 × 10⁻³ and 5.370 × 10⁻³ μA μM⁻¹ mm⁻², and limits of detection (LODs) of 0.081 and 0.115 μM, respectively. For the simultaneous determination of 4-CP/THA, the sensitivities of the modified electrode were 0.0105 and 9.399 × 10⁻³ μA μM⁻¹ mm⁻², and detection limits were 0.062 and 0.070 μM respectively.     

MnO anchored reduced graphene oxide nanocomposite for high energy applications of Li-ion batteries: The insight of charge-discharge process

In the present work, a new class of anode material for high energy applications of Li-ion battery is prepared by easy and large-scale producible process. Herein, the nanocomposite of MnO and reduced graphene oxide (rGO) is prepared by anchoring MnO nanoparticles into 3D matrix of rGO hydrogel followed by annealing process. The composite which has homogeneous distribution of MnO particles on conducting rGO layers demonstrated superior electrochemical performance such as high reversible capacity, stable cycle life and better rate capability. It has shown initial discharge capacity of 2358 mAh g⁻¹ and retained 570 mAh g⁻¹ after 100 cycles as compared to pristine MnO which shown initial discharge capacity of 820 mAh g⁻¹ and retained only 45 mAh g⁻¹ after 100 cycles. The retained capacity of new MnO/rGO anode is much higher than the theoretical capacity of conventional graphite anode. Moreover, the MnO/rGO nanocomposite shows six times higher Li⁺ ion diffusion of 4.18 × 10⁻¹² cm² s⁻¹ as compared to 6.84 × 10⁻¹³ cm² s⁻¹ of MnO. In addition, the study provides insight of charge-discharge process, which conducted in initial, discharge and charge states of pristine MnO and MnO/rGO composite using ex-situ X-ray diffraction and X-ray photon spectroscopy techniques.     

Bifunctional ternary manganese oxide/vanadium oxide/reduced graphene oxide as electrochromic asymmetric supercapacitor

A bifunctional ternary manganese oxide/vanadium oxide/reduced graphene oxide (MnO₂/V₂O₅/rGO) was developed for asymmetric electrochromic supercapacitor (EC-SC) application. The elemental mapping revealed uniformly distributed MnO₂, V₂O₅ and rGO, depicting homogenous synthesis of the hybrid composite. The phase composition, vibration modes and valance state of the ternary composite were analyzed via X-ray diffraction (XRD), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) analysis, respectively. Interestingly, the as-prepared MnO₂/V₂O₅/rGO composite disclosed tremendous C_sp of 1403.5 F/g, which was higher compared to MnO₂/V₂O₅ (801.1 F/g), V₂O₅ (613.1 F/g), MnO₂ (126.7 F/g) and rGO (60.7 F/g). MnO₂/V₂O₅/rGO that appeared in dark green switched its visual color to orange at the charged state, confirming the electrochromic property. The bifunctional manganese oxide/vanadium oxide/reduced graphene oxide//copper-based metal-organic framework/reduced graphene oxide (MnO₂/V₂O₅/rGO//MrGO) asymmetrical EC-SC device revealed outstanding cycling stability (90.3% charge retention over 5000 cycles), tremendous specific capacitance (652.7 F/g) and maximum specific energy (60.4 Wh/kg). MnO₂/V₂O₅/rGO//MrGO asymmetrical EC-SC device demonstrated reversible color changes from dark green to orange at the discharged and charged states, respectively. The significantly great electrochromic and supercapacitive performance revealed that MnO₂/V₂O₅/rGO//MrGO is an outstanding electroactive candidate for the next generation of electrochromic supercapacitors.     

Low-temperature exfoliated graphene oxide incorporated with different types of natural rubber latex: Electrical and morphological properties and its capacitance performance

A simple with cost-effective method in the production and fabrication of graphene-based rubber nanocomposites as electrode materials is still remain a global challenge. In this work, we proposed one- and two-step approaches to fabricate an exfoliated graphene oxide (GO) as nanofiller in three different types of rubber latex polymer, namely, low ammonia natural rubber latex (NRL), radiation vulcanized NRL (RVNRL), and epoxy NRL 25 (ENRL 25). The electrical conductivity and capacitive behavior of nanocomposite samples were investigated under a four-point probe and cyclic voltammetry measurements, respectively. Meanwhile, the morphological properties were observed using field emission scanning electron microscopy, energy dispersive X-ray, optical polarization microscope, high-resolution transmission electron microscopy, Fourier-transform infrared spectroscopy, micro-Raman spectroscopy, and X-ray diffraction. The thermal stabilities of the nanocomposites were also investigated by thermogravimetric analysis. Among all, the GO/RVNRL polymer nanocomposite samples performed a better homogeneity with an improved electrical conductivity (~8.6 × 10⁻⁴ Scm⁻¹) as compared with the GO/ENRL 25 (~3.1 × 10⁻⁴ Scm⁻¹) and GO/NRL (~2.6 × 10⁻⁴ Scm⁻¹) polymer nanocomposite samples. In addition, the GO/RVNRL polymer nanocomposite electrodes showed acceptable specific capacitance (5 Fg^-1). The successfully fabricated conductive GO-based rubber nanocomposites are suitable for new supercapacitor electrodes.     

Enhancement in the photocatalytic and optoelectronic properties of erbium oxide by adding zinc oxide and molybdenum

Rare earth metals like erbium oxide (Er₂O₃) show outstanding photocatalytic properties. However, its high recombination rate and low surface area limit its performance. Therefore, various metal oxide composites with Er₂O₃ have been reported to improve their photocatalytic and optoelectronic properties. In this study, a composite of Er₂O₃ and zinc oxide (ZnO) was synthesized using the sol-gel combustion method to enhance its surface area. Moreover, molybdenum (Mo) was loaded on the matrix to suppress the charge recombination. The detailed characterizations were conducted by employing X-ray Diffraction (XRD), Raman Spectroscopy, Field Emission Scanning Electron Microscopy (FESEM), Brunauer–Emmett–Teller (BET) analysis, Photoluminescence (PL) spectroscopy and UV–Vis spectroscopy. BET analysis revealed the enhancement in surface area by adding ZnO and Mo (from S_BET = 29.07 m²/g to S_BET = 45.71 m²/g). Additionally, the loading of Mo enhanced the immobilization of carriers that facilitate the photooxidation process and suppressed the electron-holes recombination (from 800 counts to 100 counts) as confirmed by the PL spectroscopy. Photocatalytic studies were comparatively analyzed by degradation of textile dye named methylene blue (MB). The efficiency of Er₂O₃ improved by up to 80% by adding the ZnO and Mo. The composite of Er₂O₃ with ZnO and loading of Mo, not only improved the photocatalytic properties but also improved the electrical properties of the Er₂O₃ (σ = 4.4 × 10⁻⁴ Sm⁻¹ to σ = 5.1 × 10⁻⁴ Sm⁻¹) as confirmed by the Hall Effect. Due to enhancement in properties, the proposed material can be rendered as one of the most suitable candidates for optoelectronic applications.     

Decorating carbon nanosheets with copper oxide nanoparticles for boosting the electrochemical performance of symmetric coin cell supercapacitor with different electrolytes

The synergetic combination of double-layer capacitor carbon nanosheets and pseudocapacitive CuO particles with enhanced electrochemical properties had been proposed. Herein, CuO/carbon nanosheets electrode material with outstanding electrochemistry performance was successfully synthesized via a low-cost and controllable strategy. Such rational architecture integrates high-conductivity carbon nanosheets with rich-chemical-activity CuO particles. The surface-functional carbon nanosheets serve as a conductive substrate, provide an efficient pathway and accelerate the fast diffusion of electrons. This electrode material depicts high specific capacitance up to 183.9 and 371.1 F g⁻¹ at 1 A g⁻¹ in Na₂SO₄ and KOH electrolyte using three-electrode tests, respectively. Moreover, two symmetric devices using this CuO/carbon nanosheets electrode material were assembled with different electrolytes. The as-fabricated device with KOH electrolyte delivers remarkable energy density of 19.36 W h kg⁻¹ at power density of 355.6 W kg⁻¹ and still maintains 12.06 W h kg⁻¹ at 1750.7 W kg⁻¹. The as-fabricated device with Na₂SO₄ electrolyte achieves the maximum energy density of 12.46 W h kg⁻¹ at 355.6 W kg⁻¹. The capacitance retention rate is maintained at 94.4% after 2000 cycles in the as-fabricated coin cell supercapacitor with Na₂SO₄ electrolyte, showing outstanding long-cycling life. Herein, the strategic integration of CuO particles with two-dimensional functional carbon nanosheets as the electrode material provides superior electrochemical performance for supercapacitors.     

Electrochemical behavior of CuO/rGO nanopellets for flexible supercapacitor,non-enzymatic glucose,and H2O2 sensing application

In the present article, graphene oxide (GO) sheets and monoclinic copper oxide (CuO) nanocrystals are connected with each other and result in the formation of CuO/rGO nanopellets, and these nanopellets synthesized using coprecipitation method. The nanopellet structured CuO/rGO composite on carbon cloth, which act as current collector exhibits specific capacitance of 188 F g^?1 at a current density of 0.2 A g^?1 and up to 96.3% capacity retention after 2000 charge-discharge cycles. It shows a maximum energy density of 7.32 Wh kg^?1 and power density of 53 W kg^?1. The glucose sensing characteristics of CuO/rGO nanopellet is investigated on carbon cloth and ITO substrate. It shows glucose sensitivity of 0.805 mA mM^?1 cm^?2 and 0.2982 mA mM^?1 cm^?2 for a bundle like structured CuO/rGO composite on carbon cloth and ITO substrate, respectively. Further H₂O₂ sensing is studied on ITO substrate, which manifests H₂O₂ sensitivity of 84.39 μA mM^?1 cm^?2. The results indicate that nanopellet structured CuO/rGO composite could be a promising electrode material for supercapacitor, glucose, and H₂O₂ sensor.     

Extraction equilibria of chromium(VI) from sulfuric acid solutions with tri-n-octylphosphine oxide

The extraction equilibria of chromium(VI) from sulfuric acid solutions with tri-n-octylphosphine oxide (TOPO) dissolved in kerosene at 25°C have been studied. The possible complexes of chromium(VI) with TOPO in organic phase and extraction constants were determined by best fitting the distribution coefficient expression of Cr(VI) with experimental data using the Rosenbrock method. The extraction reactions, including the equilibria among seven species in aqueous phase (H₂CrO₄, HCrO₄⁻, HCr₂O₇⁻, Cr₂O₇²⁻, CrSO₇²⁻, HSO₄⁻ and SO₄²⁻) and five possible complexes in organic phase (H₂CrO₄·(TOPO), H₂Cr₂O₇·(TOPO)₃, H₂CrSO₇·(TOPO)₃, H₂SO₄·(TOPO)₂ and (H₂SO₄)₂·(TOPO)₂) were proposed. The influence of initial sulfuric acid concentration on the fraction of extracted complexes and on the distribution coefficients of Cr(VI) is discussed. This result was helpful for the clarification of the extraction reactions of Cr(VI). © 1998 Society of Chemical Industry     

Nanocrystalline transition metal oxides and their composites with reduced graphene oxide and carbon nanotubes for photocatalytic applications

Transition metal oxide nanoparticles (CuO, ZnO & Fe₂O₃) and mixed metal oxides CuO. ZnO.Fe₂O₃ were fabricated by facile co-precipitation approach for photocatalytic treatment of organic dyes. The structural features, phase purity, crystallite size and morphology of individual and mixed metal oxides were analysed by X-rays diffraction patterns (XRD) and scanning electron microscopic (SEM) analysis. Electrical behaviour of CuO, ZnO, Fe₂O₃ and mixed metal oxides CuO. ZnO.Fe₂O₃ was explored by current-voltage (I-V) measurements. Functional groups present in the synthesized metal oxides were investigated by Fourier transform infrared spectroscopy (FTIR) which ensures the existence of M-O functional groups in the samples. The optical bandgap analysis was carried out by UV–visible spectroscopic technique which revealed that the blend of three different transition metal oxides reduced the bandgap energy of mixed metal oxides. The reason behind this reduced bandgap energy is formation of new electronic state which arises due to the metal-oxygen interactions. Moreover, the nanocomposites of CuO.ZnO.Fe₂O₃ with reduced graphene oxide (rGO) and carbon nanotubes (CNTs) were prepared to study the effect of the carbonaceous materials on the rate of photodegradation. These carbonaceous nanomaterials have plethora properties which can bring advancement in sector of photocatalytic treatment of wastewater. The photocatalytic experiments were performed using methylene blue (MB) as standard dye for comparative study of metal oxides and their composites with rGO and CNTs. The percentage degradation of methylene blue (MB) by nanocomposite CuO.ZnO.Fe₂O₃/rGO is 87% which is prominent among all samples. This result ascribed the photocatalytic aspects of reduced graphene oxide along with mixed metal oxides.     

Structural and ion transport properties of sodium ion conducting Na2MTeO6 (M= MgNi and MgZn) solid electrolytes

Solid-state electrolytes Na₂MTeO₆ (M = MgNi and MgZn) were prepared via a conventional solid-state reaction method. Structural properties of the samples were investigated by using powder X-ray diffraction (XRD), Raman, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy, and X-ray photoelectron spectroscopy (XPS) techniques. XPS and XRD studies indicate the phase pure hexagonal layered P2-type structure of samples. Raman and FTIR spectroscopy reveal the possible bending and stretching vibration modes for Te–O and other metal oxides. The ion transport properties of the solid electrolytes were investigated by using AC impedance spectroscopy. The electrical properties were examined by means of classical brick layer model. The specific grain conductivity (σ_g) is found to be 2.13 × 10⁻⁵ S cm⁻¹ and 0.90 × 10⁻⁵ S cm⁻¹ at 20 °C for Na₂MgNiTeO₆ and Na₂MgZnTeO₆ electrolytes, respectively. The activation energy of σ_g for Na₂MgNiTeO₆ and Na₂MgZnTeO₆ is found to be 0.59 eV and 0.36 eV respectively for the temperature below 30 °C. Summerfield AC conductivity scaling analysis of samples is performed. These electrolytes could be potential candidates in solid-state Na⁺ battery applications.     

A multifunctional Ag/TiO2/reduced graphene oxide with optimal surface-enhanced Raman scattering and photocatalysis

A multifunctional Ag/TiO₂/reduced graphene oxide (rGO) ternary nanocomposite was prepared by a one-step photochemical reaction with TiO₂ and Ag nanoparticles successively deposited on reduced graphene oxide. The structure, morphology, composition, optical, and photoelectrochemical properties of Ag/TiO₂/rGO were investigated in detail. Meanwhile, the ternary nanocomposite possessed much higher adsorption capacity to organic dyes compared with bare TiO₂ and binary Ag/TiO₂, which would help to its use for surface-enhanced Raman scattering detection and photocatalytic degradation. Due to the charge transfer between rGO and organic dyes and enhanced electromagnetic mechanism of Ag, Ag/TiO₂/rGO nanocomposites as surface-enhanced Raman scattering substrates demonstrated dramatically improved sensitivity and good uniformity. The detection limit of rhodamine 6G (R6G) was as low as 10⁻⁹ mol/L, and the relative standard deviation values of the intensities remained below 5%. Most importantly, the synergistic coupling effect of three components extended the photoresponse range and accelerated separation of the electron-hole pairs, leading to greatly improved photocatalytic activity under simulated sunlight. The maximum rate constant (k, 0.06243 min⁻¹) of Ag/TiO₂/rGO was 50 and four times higher than that of TiO₂ and Ag/TiO₂, respectively.     

Improvement of microwave absorption for PAni/HA/TiO2/Fe3O4 nanocomposite after chemical treatment

In order to obtain efficient microwave absorbers that possess high conductivity, dielectric and magnetic properties, hexanoic acid doped polyaniline (PAni) nanocomposites which contain different ratios of ferum (II) oxide (Fe₃O₄) and titanium dioxide (TiO₂) nanoparticles were successfully prepared by in situ chemical polymerization through template free method. Chemical structure, conductivity, morphology, thermal stability, magnetic properties, and amorphous/crystalline behavior of PAni nanocomposites were characterized by Fourier transform infrared spectrometer (FTIR), four point probe, field emission scanning electron microscope (FESEM), thermal gravimetric analysis (TGA), vibrating samples magnetometer (VSM), and X‐ray diffractometer (XRD), respectively. From this study, conductivity was significantly improved from 8.48 × 10⁻⁴−1.23 × 10⁻² S/cm for PAni nanocomposites without any chemical treatment (during addition of Fe₃O₄) to 3.58 × 10⁻²−4.77 × 10⁻² S/cm for those with chemical treatment. PAni nanocomposites with chemical treatment show a narrow sharp reflection loss (RL) peak with high absorption (−48.9 dB) at lower frequency due to the limited individual Fe₃O₄ nanoparticles outside the nanorods/nanotubes as proved by the new proposed mechanism (Fig. 5 ), while it shows a broad RL peak with poor absorption (−13 dB) at higher frequency for those without chemical treatment. The novelty of this research has been focused on PAni with chemical treatment which yield better microwave absorption property (99.999% absorption), combination of high conductivity (3.58 × 10⁻²−4.77 × 10⁻² S/cm), high heterogeneity and moderate magnetization (Ms = 8.87–28.49 emu/g) compare to the PAni without chemical treatment. POLYM. COMPOS., 34:1186–1194, 2013. © 2013 Society of Plastics Engineers     

Low-temperature synthesis of copper oxide (CuO) nanostructures with temperature-controlled morphological variations

We demonstrate low-temperature formation of copper oxide (CuO) nanostructures as well as temperature-controlled variation of morphology by applying hydrothermal methods with copper(II) acetate Cu(CH₃COO)₂·H₂O and 2-piperidinemethanol (2PPM) as starting materials. Monoclinic CuO nanostructures produced at 25 °C were of dendritic morphology with short nanorod-like substructures and exhibited a consequently large surface area (179 m² g⁻¹). Cyclic voltammetry measurements confirmed pseudocapacitive behavior of these dendritic CuO nanostructures giving specific capacitance ca. 28.2 F g⁻¹ at a scan rate of 5 mV s⁻¹. Oxide nanomaterials prepared in this investigation were characterized using powder X-ray diffraction, scanning and transmission electron microscopies, and nitrogen adsorption/desorption techniques. It is expected that these materials exhibit improved sensing and catalytic properties due to the increased availability of surface adsorption sites.     

Synthesis,Characterization, and Antibacterial Activity of Polyindole/Ag–Cuo Nanocomposites by Reflux Condensation Method

Polyindole-based silver and copper oxide (polyindole/Ag–CuO) nanocomposites were synthesized using reflux condensation method by varying the concentrations of polyindole and silver nitrate with copper oxide in N₂ atmosphere. They were characterized by Fourier transform infrared (FTIR), X-ray diffraction (XRD), and scanning electron microscope (SEM) techniques. The SEM images revealed fascinating shapes of CuO nanoparticles. The FTIR and XRD confirmed the functional group transformation and crystalline natures of silver and CuO existed in the nanocomposites. The polyindole/Ag–CuO nanocomposites were examined for antibacterial activity and found to exhibit the antibacterial activity against pathogenic bacteria.     

The mechanism of the reaction of graphite oxide to reduced graphene oxide under ultraviolet irradiation

Under ultraviolet (UV) irradiation, the formation and reduction mechanism of reduced graphene oxide (rGO) layers prepared from graphite oxide (GO) sheets have been investigated. The effects of hydroxyl free radicals (HO), hydroxide ions (OH⁻) or hydrazine molecules (N₂H₄) are considered. It has been demonstrated that the HO radicals, UV-induced from H₂O₂ molecules in aqueous solution, cannot reduce GO into rGO, but to some extent oxidize and damage the GO structure, simultaneously accompanied by a slight increase of acidity, possibly because of a release of H⁺ from H₂O₂ and GO during the reaction. The existence of OH⁻ ions or N₂H₄ instead of H₂O₂ molecules enables GO sheets to be quickly reduced into rGO due to the effect of photo-induced electrons on the GO sheets. The electrons are photogenerated mainly from OH⁻ or N₂H₄ in a GO aqueous dispersion. Because GO in diluted N₂H₄ aqueous solution can be photo-reduced almost completely within half an hour at room temperature, it is inferred that many more electrons are generated from N₂H₄ than from OH⁻.     

Electrical properties of FeII‐terpyridine‐Modified cellulose nanocrystals and polycaprolactone/FeII‐CTP nanocomposites

Supramolecular crosslinked Fe^II‐terpyridine cellulose nanocrystals (Fe‐CTP) were prepared by surface modification of cellulose nanocrystals with 4′‐chloro‐2,2′:6′,2″‐terpyridine and subsequent reaction with Fe(II)SO₄. The prepared complex was characterized using transmission electron microscopy (TEM), ultraviolet spectroscopy (UV), thermogravimetric analysis (TGA), and measuring its electrical properties at temperatures from 25 to 70°C. Use of Fe‐CTP at loadings from 1% to 10% (wt. ratio) in nanocomposites with polycaprolactone polymer was investigated; the nanocomposites were characterized regarding their electrical properties, which studied using broadband AC‐relaxation spectroscopy in the frequency range between 0.1 Hz and 1 MHz. The results were compared to that of PCL nanocomposites containing multiwalled carbon nanotubes (CNT). Variation in real and imaginary parts of permittivity has been explained on the basis of interfacial polarization of fillers in the polymer medium. The percolation limit of the conductive CNT and Fe‐CTP as studied by ac conductivity measurements has also been reported. Fe‐CTP showed conductivity values in the range of semiconductors. PCL/Fe‐CTP nanocomposites showed conductivity values from 1.98 × 10⁻¹¹ to 3.76 × 10⁻⁶ while PCL/CNT nanocomposites showed conductivity values from 1.4 × 10⁻¹⁰ to 3.67 × 10⁻⁴ S/m for 1–10 wt% CNT content. POLYM. COMPOS., 37:2734–2743, 2016. © 2015 Society of Plastics Engineers     

Microwave assisted synthesis of rGO/ZnO composites for non-enzymatic glucose sensing and supercapacitor applications

Zinc oxide (ZnO) and Graphene Oxide (GO) are known to show good electrochemical properties. In this paper, rGO/ZnO nanocomposites have been synthesised using a simple microwave assisted method. The nanocomposites are characterized using XRD, Raman, SEM and TEM. XRD reveals the wurtzite structure of ZnO and TEM shows the heterogeneous nucleation of ZnO nanocrystals anchored onto graphene sheets. The electrochemical properties of the rGO/ZnO nanocomposite enhanced significantly for applications in glucose sensors and supercapacitors. The non-enzymatic glucose sensor of this nanocomposite tested using cyclic voltammetry (CV) and chronoamperometry, exhibits high sensitivity (39.78 mA cm⁻² mM⁻¹) and a lower detection limit of 0.2 nM. The supercapacitor electrode of rGO/ZnO nanocomposite exhibits a significant increase in specific capacitance.