Synthesis and Characterization of 1‐Azido‐2‐Nitro‐2‐Azapropane and 1‐Nitrotetrazolato‐2‐Nitro‐2‐Azapropane

1‐Azido‐2‐nitro‐2‐azapropane ( 1 ) was synthesized in high yield from 1‐chloro‐2‐nitro‐2‐azapropane and sodium azide. 1‐Nitrotetrazolato‐2‐nitro‐2‐azapropane ( 2 ) was synthesized in high yield from 1‐chloro‐2‐nitro‐2‐azapropane and silver nitrotetrazolate. The highly energetic new compounds ( 1 and 2 ) were characterized using vibrational (IR and Raman) and multinuclear NMR spectroscopy (¹H, ¹³C, ¹⁴N), elemental analysis and low‐temperature single crystal X‐ray diffraction. 1‐Azido‐2‐nitro‐2‐azapropane ( 1 ) represents a covalently bound liquid energetic material which contains both a nitramine unit and an azide group in the molecule. 1‐Nitrotetrazolato‐2‐nitro‐2‐azapropane ( 2 ) is a covalently bound room‐temperature stable solid which contains a nitramine group and a nitrotetrazolate ring unit in the molecule. Compounds 1 and 2 are hydrolytically stable at ambient conditions. The impact sensitivity of compound 1 is very high (<1 J) whereas compound 2 is less sensitive (<6 J).     

Synthesis and Cytostatic and Antiviral Activities of 2′‐Deoxy‐2′,2′‐difluororibo‐ and 2′‐Deoxy‐2′‐fluororibonucleosides Derived from 7‐(Het)aryl‐7‐deazaadenines

A series of sugar‐modified derivatives of cytostatic 7‐heteroaryl‐7‐deazaadenosines (2′‐deoxy‐2′‐fluororibo‐ and 2′‐deoxy‐2′,2′‐difluororibonucleosides) bearing an aryl or heteroaryl group at position 7 was prepared and screened for biological activity. The difluororibonucleosides were prepared by non‐ stereoselective glycosidation of 6‐chloro‐7‐deazapurine with benzoyl‐protected 2‐deoxy‐2,2‐difluoro‐D ‐erythro‐pentofuranosyl‐1‐mesylate, followed by amination and aqueous Suzuki cross‐couplings with (het)arylboronic acids. The fluororibo derivatives were prepared by aqueous palladium‐catalyzed cross‐coupling reactions of the corresponding 7‐iodo‐7‐deazaadenine 2′‐deoxy‐2′‐fluororibonucleoside 20 with (het)arylboronic acids. The key intermediate 20 was prepared by a six‐step sequence from the corresponding arabinonucleoside by selective protection of 3′‐ and 5′‐hydroxy groups with acid‐labile groups, followed by stereoselective S_N2 fluorination and deprotection. Some of the title nucleosides and 7‐iodo‐7‐deazaadenine intermediates showed micromolar cytostatic or anti‐HCV activity. The most active were 7‐iodo and 7‐ethynyl derivatives. The corresponding 2′‐deoxy‐2′,2′‐difluororibonucleoside 5′‐O‐triphosphates were found to be good substrates for bacterial DNA polymerases, but are inhibitors of human polymerase α.     

Structural,spectroscopic and computational study of 5‐(substituted phenylazo)‐3‐cyano‐1‐ethyl‐6‐hydroxy‐4‐methyl‐2‐pyridones

Ten 5‐(substituted phenylazo)‐3‐cyano‐1‐ethyl‐6‐hydroxy‐4‐methyl‐2‐pyridones were studied (five new compounds) to provide insight into the electronic effects of diverse substituents located at different positions in their phenyl moieties. The structural features of these dyes were examined by combining experimental and theoretical approaches. The crystal structures of two derivatives were revealed by X‐ray crystallography and diverse packing modes owing to different intermolecular interactions (π–π stacking and lone pair–π interactions, as well as hydrogen bonds) were found. A study on lattice energy and energy related to the molecular pairs obtained from their crystal packing was performed. The tautomerism and ionisation of the dyes in ethanol or N,N ‐dimethylformamide solution were rationalised in terms of diazo component substitution pattern.     

Synthesis and Characterization of 1‐Nitroguanyl‐3‐nitro‐5‐amino‐1,2,4‐triazole

The synthesis of 1‐nitroguanyl‐3‐nitro‐5‐amino‐1,2,4‐triazole (ANTA‐NQ) ( 1 ) with good yield and high purity is described. DSC analysis showed that the material displays good thermal stability. An X‐ray crystallographic analysis confirms the structure of this material, as well as displays intramolecular hydrogen bonding. A gas pycnometry density for this material was measured to be 1.79 g cm⁻³. The heat of formation of this material was also measured. These data, along with the molecular formula were used as inputs to calculate the detonation velocity and detonation pressure using the Cheetah thermochemical code. The sensitivity of this material towards impact, spark and friction was also measured, as well as its vacuum thermal stability. The 3‐azido derivative 2 was also prepared and its properties are described as well. The above data show that (ANTA‐NQ) may be a high performing material with low sensitivity and good thermal stability.     

Polymerization of 4‐(4′‐N‐1,8‐naphthalimidophenyl)‐1,2,4‐triazolidine‐3,5‐dione with diisocyanates

4‐(4′‐Aminophenyl)‐1,2,4‐triazolidine‐3,5‐dione ( 1 ) was reacted with 1,8‐naphthalic anhydride ( 2 ) in a mixture of acetic acid and pyridine (3 : 2) under refluxing temperature and gave 4‐(4′‐N‐1,8‐naphthalimidophenyl)‐1,2,4‐triazolidine‐3,5‐dione ( NIPTD ) ( 3 ) in high yield and purity. The compound NIPTD was reacted with excess n‐propylisocyanate in N,N‐dimethylacetamide solution and gave 1‐(n‐propylamidocarbonyl)‐4‐[4′‐(1,8‐naphthalimidophenyl)]‐1,2,4‐triazolidine‐3,5‐dione ( 4 ) and 1,2‐bis(n‐propylamidocarbonyl)‐4‐[4′‐(1,8‐naphthalimidophenyl)]‐1,2,4‐ triazolidine‐3,5‐dione ( 5 ) as model compounds. Solution polycondensation reactions of monomer 3 with hexamethylene diisocyanate ( HMDI ), isophorone diisocyanate ( IPDI ), and tolylene‐2,4‐diisocyanate ( TDI ) were performed under microwave irradiation and conventional solution polymerization techniques in different solvents and in the presence of different catalysts, which led to the formation of novel aliphatic‐aromatic polyureas. The polycondensation proceeded rapidly, compared with conventional solution polycondensation, and was almost completed within 8 min. These novel polyureas have inherent viscosities in a range of 0.06–0.20 dL g^?1 in conc. H₂SO₄ or DMF at 25°C. Some structural characterization and physical properties of these novel polymers are reported. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2861–2869, 2003     

Synthesis and properties of fluorinated polyimides from 1,1‐bis(4‐amino‐3,5‐dimethylphenyl)‐1‐(3,4,5‐trifluorophenyl)‐2,2,2‐trifluoroethane and various aromatic dianhydrides

A novel aromatic diamine, 1,1‐bis(4‐amino‐3,5‐dimethylphenyl)‐1‐(3,4,5‐trifluorophenyl)‐2,2,2‐trifluoroethane, containing a pendant polyfluorinated phenyl group, a trifluoromethyl group, and methyl groups ortho‐substituted to the amino groups in the structure was synthesized and characterized. The diamine was polymerized with several aromatic dianhydrides, including 3,3′,4,4′‐biphenyltetracarboxylic dianhydride, 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride, 4,4′‐oxydiphthalic anhydride, and 4,4′‐hexafluoroisopropylidene diphthalic anhydride, via a high‐temperature one‐step procedure to afford four polyimides (PIs) with inherent viscosities of 0.47–0.70 dL/g. The PIs exhibited excellent solubilities in a variety of organic solvents. They were soluble not only in polar aprotic solvents but in many common solvents, such as cyclopentanone, tetrahydrofuran, and even toluene at room temperature. The tough and flexible PI films cast from the PI solutions exhibited good thermal stabilities and acceptable tensile properties. The glass‐transition temperatures were in the range 312–365°C, and the 5% weight loss temperatures were all higher than 480°C in nitrogen. The films had tensile strengths in the range 76–99 MPa, tensile moduli of 2.2–2.8 GPa, and elongations at break of 5–8%. In addition, the PI films exhibited excellent transparency in the visible light region with cutoff wavelength as low as 302 nm and transmittance higher than 88% at the wavelength of 450 nm. The PI films showed low dielectric constants ranging from 2.50–2.68 and low moisture absorptions of less than 0.56%. The good combined properties of the PIs mainly resulted from the synergic effects of the different substituents. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Crystallization behavior of 1,3‐dipalmitoyl‐2‐oleoyl‐glycerol and 1‐palmitoyl‐2,3‐dioleoyl‐glycerol

A model margarine was stored under a temperature fluctuation cycle of 5—20 °C until granular crystals were observed. Using information obtained from the granular crystals, the crystallization behaviors of major triacylglycerols of palm oil, 1,3‐dipalmitoyl‐2‐oleoyl‐glycerol (POP), 1‐palmitoyl‐2,3‐dioleoyl‐glycerol (POO), and their mixtures were then investigated. It was shown that in the model margarine, the POP content in the granular crystals was higher than in their surrounding materials, and the X‐ray diffraction pattern of the granular crystals revealed that they were the most stable polymorph, β. 99% pure POP, POO, and their mixtures were then stored under the above‐mentioned temperature cycle. POP was found to form the unstable polymorph, α, when cooled rapidly from the melt. Within 24 hours transformation into the γ polymorph and then into the β polymorph was observed. POO was shown to transform into the β' polymorph from α. When POP and POO were mixed, the β polymorph did not emerge, instead it was shown that POP and POO were both agglomerated in the mixtures, giving rise to the formation of granular crystals.     

Recognition and Excision Properties of 8‐Halogenated‐7‐Deaza‐2′‐Deoxyguanosine as 8‐Oxo‐2′‐Deoxyguanosine Analogues and Fpg and hOGG1 Inhibitors

Cellular DNA continuously suffers various types of damage, and unrepaired damage increases disease progression risk. 8‐Oxo‐2′‐deoxyguanine (8‐oxo‐dG) is excised by repair enzymes, and their analogues are of interest as inhibitors and as bioprobes for study of these enzymes. We have developed 8‐halogenated‐7‐deaza‐2′‐deoxyguanosine derivatives that resemble 8‐oxo‐dG in that they adopt the syn conformation. In this study, we investigated their effects on Fpg (formamidopyrimidine DNA glycosylase) and hOGG1 (human 8‐oxoguanine DNA N‐glycosylase 1). Relative to 8‐oxo‐dG, Cl‐ and Br‐deaza‐dG were good substrates for Fpg, whereas they were less efficient substrates for hOGG1. Kinetics and binding experiments indicated that, although hOGG1 effectively binds Cl‐ and Br‐deaza‐dG analogues with low K_m values, their lower k_cat values result in low glycosylase activities. The benefits of the high binding affinities and low reactivities of 8‐oxo‐dG analogues with hOGG1 have been successfully applied to the competitive inhibition of the excision of 8‐oxoguanine from duplex DNA by hOGG1.     

Copolymerization of 1‐oxo‐2,6,7‐trioxa‐1‐phorsphabicyclo[2,2,2]oct‐4‐yl methyl acrylate and (10‐oxo‐10‐hydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐yl) methyl acrylate with styrene and their thermal degradation characteristics

Two phosphorus‐containing acrylates of 1‐oxo‐2,6,7‐trioxa‐1‐phorsphabicyclo[2,2,2]oct‐4‐yl methyl acrylate and (10‐oxo‐10‐hydro‐9‐oxa‐10λ⁵‐phosphaphenanthrene‐10‐yl) methyl acrylate were free‐radical‐copolymerized with styrene (St). The r₁ reactivity ratio values (related to the novel acrylates) were 0.342 and 0.225, respectively, and the r₂ reactivity ratio values (related to St) were 0.432 and 0.503, respectively. The thermal stability of the copolymers was tested by thermogravimetric analysis (TGA) in N₂ or air, and the ignitability was tested by measurements of UL‐94 vertical combustion tests and the limiting oxygen index. The results of TGA and combustion tests indicated that the effect of flame retardancy was determined by the nature of the phosphorus‐containing substituent. Compared with the 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide based group, the 1‐oxo‐2,6,7‐trioxa‐1‐phorsphabicyclo[2,2,2]oct‐4‐yl methol based group could enhance the ability of char formation with an antidripping effect. It is concluded that phosphorus‐containing acrylates are potential flame‐retarding monomers for styrenic polymers. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

The β‐δ‐Phase Transition and Thermal Expansion of Octahydro‐1,3,5,7‐Tetranitro‐1,3,5,7‐Tetrazocine

Phase behavior of octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocine (HMX) is investigated by X‐ray powder diffraction (XRD). The XRD patterns at elevated temperature show that there is a co‐existing temperature range of β‐ and δ‐phase during the phase transition process. Additionally, mechanical forces can catalyze the conversion from δ‐ back to β‐phase. Based on the diffraction patterns of β‐ and δ‐phase at different temperatures, we calculate the coefficients of thermal expansion by Rietveld refinement. For β‐HMX, the linear coefficients of thermal expansion of a‐axis and b‐axis are about 1.37×10⁻⁵ and 1.25×10⁻⁴ °C⁻¹. A slight decrease in c‐axis with temperature is also observed, and the value is about −0.63×10⁻⁵ °C⁻¹. The volume coefficient of thermal expansion is about 1.60×10⁻⁴ °C⁻¹, with a 2.2% change from 30 to 170 °C. For δ‐HMX, the linear coefficients of thermal expansion of a‐axis and c‐axis are found to be 5.39×10⁻⁵ and 2.38×10⁻⁵ °C⁻¹, respectively. The volume coefficient of thermal expansion is about 1.33×10⁻⁴ °C⁻¹, with a 2.6% change from 30 to 230 °C. The results indicate that β‐HMX has a similar volume coefficient of thermal expansion compared with δ‐HMX, and there is about 10.5% expansion from β‐HMX at 30 °C to δ‐HMX at 230 °C, of which about 7% may be attributed to the reconstructive transition.     

Lewis Acid‐Mediated Transformations of trans‐2‐Aroyl‐3‐aryl‐ cyclopropane‐1,1‐dicarboxylates into 2‐Pyrones and 1‐Indanones

trans‐2‐Aroyl‐3‐arylcyclopropane‐1,1‐dicarboxylates upon treatment with aluminium(III) chloride (AlCl₃) underwent ring‐opening, fragmentation, recombination and lactonization to give highly substituted 2‐pyrones. Alternatively, when treated with titanium(IV) chloride (TiCl₄), the cyclopropane diesters underwent a Nazarov cyclization to afford 1‐indanones with high diastereoselectivity.

     

3‐Hydroxy‐2‐[1′‐phenyl‐3′‐(p‐chlorophenyl)‐4′‐pyrazolyl]‐4‐oxo‐4H‐1‐benzopyran as a spectrophotometric reagent for trace determination of tungsten(vi)

3‐Hydroxy‐2‐[1′‐phenyl‐3′‐(p‐chlorophenyl)‐4′‐pyrazolyl]‐4‐oxo‐4H‐1‐benzopyran solution in acetone forms a yellow‐coloured complex with tungsten(vi ) in perchloric acid medium which is extractable into chloroform after equilibration. In this study, tests were carried out on this compound and it was found to be quite stable and to obey Beer’s law. Interactions with various ions were studied and the molar absorptivity, Sandell’s sensitivity and relative standard deviation were also investigated. Job’s method, the mole ratio method and the equilibrium‐shift method were also used. The ratio of metal to ligand was measured using a method that was simpler, more accurate, sensitive, rapid and selective as compared with existing methods. This method is applicable to the analysis of various samples of varied composition.     

Synthesis and properties of organosoluble polyimides derived from 2,2′‐dibromo‐ and 2,2′,6,6′‐tetrabromo‐4,4′‐oxydianilines

Two new aromatic diamines, 2,2′‐dibromo‐4,4′‐oxydianiline (DB‐ODA 4 ) and 2,2′,6,6′‐tetrabromo‐4,4′‐oxydianiline (TB‐ODA 5 ), have been synthesized by oxidation, bromination, and reduction of 4,4′‐oxydianiline (4,4′‐ODA). Novel polyimides 6a–f and 7a–f were prepared by reacting DB‐ODA ( 4 ) and TB‐ODA ( 5 ) with several dianhydrides by one‐step method, respectively. The inherent viscosities of these polyimides ranged from 0.31 to 0.99 dL/g (0.5 g/dL, in NMP at 30°C). These polyimides showed enhanced solubilities compared to those derived from 4,4′‐oxydianiline and corresponding dianhydrides. Especially, polyimides 7a , derived from rigid PMDA and TB‐ODA ( 5 ) can also be soluble in THF, DMF, DMAc, DMSO, and NMP. These polyimides also exhibited good thermal stability. Their glass transition temperatures measured by thermal mechanical analysis (TMA) ranged from 251 to 328°C. When the same dianhydrides were used, polyimides 7 containing four bromide substituents had higher glass transition temperatures than polyimides 6 containing two bromide substituents. The effects of incorporating more polarizable bromides on the refractive indices of polyimides were also investigated. The average refractive indices (n_av) measured at 633 nm were from 1.6088 to 1.7072, and the in‐plane/out‐of‐plane birefringences (Δn) were from 0.0098 to 0.0445. It was found that the refractive indices are slightly higher when polyimides contain more bromides. However, this effect is not very obvious. It might be due to loose chain packing resulted from bromide substituents at the 2,2′ and 2,2′,6,6′ positions of the oxydiphenylene moieties. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Stereoselective thia‐Michael 1,4‐Addition to Acyclic 2,4‐Dienones and 2‐En‐4‐ynones

Organocatalyzed highly stereoselective 1,4‐thia‐Michael addition of mercaptans to linear 2,4‐dienones and 2‐en‐4‐ynones was developed using Cinchona alkaloid‐based squaramides. Application of only 0.5–1 mol % loading afforded products in up to 98:2 e.r. and above 99:1 after a single recrystallization. The adducts of allyl mercaptan can be conveniently further transformed to new chiral 2‐substituted 2,5‐dihydrothiophenes by ring‐closing metathesis.

     

Copolymerization of 2‐Acrylamido‐2‐methyl‐1‐propanesulfonic Acid and 1‐Vinylimidazole in Ethanol

Polymerization rate and copolymerization parameters of the free‐radical copolymerization of AMPS with 1‐VIm was studied as a function of the monomer feed and the pH value in ethanol. It was found that neutral and basic monomer mixtures containing the sodium salt of AMPS polymerized faster and led to polymers with a higher proportion of NaAMPS incorporated than those monomer mixtures containing the free acid. Additionally, based on the experimental data, copolymerization parameters of r_AMPS = 0.3 and r_1‐VIm = 0.13 were calculated for polymerization in acidic solution and r_AMPS = 4.1 and r_1‐VIm = 0.1 for polymerization in basic and neutral solutions. Finally, the thermal stability, rheological behavior, and intrinsic viscosity were determined for the polymers.

     

1‐amino‐4,5‐8‐naphthalenetricarboxylic acid‐1,8‐lactam‐4,5‐imide‐containing macrocycles: synthesis,molecular modelling and polymerization

Novel macrocycles containing 1‐amino‐4,5‐8‐naphthalenetricarboxylic acid‐1,8‐lactam‐4,5‐imide and 1,4,5‐8‐naphthalenetetracarboxylic bisimide fragments were synthesized by the high‐temperature pseudo‐high‐dilution acylation of the corresponding diols with isophthaloyl chloride, 4,4′‐ and 2,2′‐dichlorocarbonyl biphenyls with up to 60% yield. An important side‐reaction that impedes cyclization was found to be the reaction of diol OH groups with HCl during the acetylation. The ring strain in synthesized macrocyles and model cycles was estimated using the isodesmic reaction approach at the B3LYP/6–311 + G(d,p)//HF/3–21G level of theory. Lactamimide‐containing macrocycles were found to be more strained than bisimide‐containing macrocycles. The ring‐opening polymerization (ROP) of synthesized macrocycles in the molten state shows that the driving force of this process is the strain release on ring‐opening. The ROP of lactamimide‐containing macrocycles was found to be an efficient way to obtain lactamimide‐containing polymers, which are otherwise difficult to synthesize. Copyright © 2003 Society of Chemical Industry     

Organosoluble and light‐colored fluorinated polyimides derived from 5,5′‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy) phenyl]‐4,7‐methanohexahydroindan

A novel bis(ether amine) monomer, 5,5′‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]‐4,7‐methanohexahydroindan ( 2 ), was synthesized through the nucleophilic aromatic substitution reaction of 5,5′‐bis‐(4‐hydroxyphenyl)‐4,7‐methanohexahydroindan with 2‐chloro‐5‐nitrobenzotrifluoride to yield the intermediate dinitro compound, followed by catalytic reduction with hydrazine and Pd/C. A series of polyimides were synthesized from 2 and various aromatic dianhydrides using a standard two‐stage process with chemical or thermal imidization of poly(amic acid). All of these polymer films were soluble in amide‐type solvents above 10% w/v, had tensile strengths of 97–117 MPa, and the 10% weight loss temperature was above 464 °C with their residues exceeding 46% at 800 °C in nitrogen. Compared with the non‐fluorinated polyimides, the fluorinated series were observed to have lower dielectric constants (2.92–3.28 at 1 MHz) and lower moisture absorptions (0.15–0.43 wt%) as well as lower color intensity and better solubility. Copyright © 2006 Society of Chemical Industry     

Synthesis of novel azo‐containing polyureas derived from 4‐[4′‐(2‐hydroxy‐1‐naphthylazo)phenyl]‐1,2,4‐triazolidine‐3,5‐dione

4‐[4′‐(2‐Hydroxy‐1‐naphthylazo)phenyl]‐1,2,4‐triazolidine‐3,5‐dione ( HNAPTD ) ( 1 ) has been reacted with excess amount of n‐propylisocyanate in DMF (N,N‐dimethylformamide) solution at room temperature. The reaction proceeded with high yield, and involved reaction of both N? H of the urazole group. The resulting bis‐urea derivative 2 was characterized by IR, ¹H‐NMR, elemental analysis, UV‐Vis spectra, and it was finally used as a model compound for the polymerization reaction. Solution polycondensation reactions of monomer 1 with Hexamethylene diisocyanate ( HMDI ) and isophorone diisocyanate ( IPDI ) were performed in DMF in the presence of pyridine as a catalyst and lead to the formation of novel aliphatic azo‐containing polyurea dyes, which are soluble in polar solvents. The polymerization reaction with tolylene‐2,4‐diisocyanate ( TDI ) gave novel aromatic polyurea dye, which is insoluble in most organic solvents. These novel polyureas have inherent viscosities in a range of 0.15–0.22 g dL^?1 in DMF at 25°C. Some structural characterization and physical properties of these novel polymers are reported. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 3177–3183, 2001     

Chiral Resolution and Pharmacological Characterization of the Enantiomers of the Hsp90 Inhibitor 2‐Amino‐7‐[4‐fluoro‐2‐(3‐pyridyl)phenyl]‐4‐methyl‐7,8‐dihydro‐6H‐quinazolin‐5‐one Oxime

Heat‐shock protein 90 (Hsp90) is a molecular chaperone involved in the stabilization of key oncogenic signaling proteins, and therefore, inhibition of Hsp90 represents a new strategy in cancer therapy. 2‐Amino‐7‐[4‐fluoro‐2‐(3‐pyridyl)phenyl]‐4‐methyl‐7,8‐dihydro‐6H‐quinazolin‐5‐one oxime is a racemic Hsp90 inhibitor that targets the N‐terminal adenosine triphosphatase site. We developed a method to resolve the enantiomers and evaluated their inhibitory activity on Hsp90 and the consequent antitumor effects. The (S) stereoisomer emerged as a potent Hsp90 inhibitor in biochemical and cellular assays. In addition, this enantiomer exhibited high oral bioavailability in mice and excellent antitumor activity in two different human cancer xenograft models.     

1‐Amino‐1‐hydrazo‐2,2‐dinitroethene – a Hazard Warning

1‐Amino‐1‐hydrazo‐2,2‐dinitroethene ( 2 ) has been observed to spontaneously decompose with considerable violence during storage. Its preparation and handling should be regarded as potentially hazardous.