A new synthetic approach to asymmetric amphiphilic ABA′ block copolymers by ATRP and click reactions

Well‐defined asymmetric amphiphilic ABA′ block copolymers composed of poly(ethylene oxide) monomethylene ether (MPEO) with different molecular weights as A or A′ block and poly(styrene) (PS) as B block were synthesized by the combination of atom transfer radical polymerization (ATRP) and click reactions. First, bromine‐terminated diblock copolymer poly(ethylene oxide) monomethylene ether‐block‐poly(styrene) (MPEO‐PS‐Br) was prepared by ATRP of styrene initiated with macroinitiator MPEO‐Br, which was prepared from the esterification of MPEO and 2‐bromoisobutyryl bromide. Then, the azido‐terminated diblock copolymers MPEO‐PS‐N₃ were prepared through the bromine substitution reaction with sodium azide. Propargyl‐terminated MPEO with a different molecular weight was prepared under the basic condition from propargyl alcohol and p‐toluenesulfonyl‐terminated MPEO, which was prepared through the esterification of MPEO and p‐toluenesulfochloride using pyridine as solvent. Asymmetric amphiphilic ABA′ block copolymers, with a wide range of number–average molecular weights from 1.92 × 10⁴ to 2.47 × 10⁴ and a narrow polydispersity from 1.03 to 1.05, were synthesized via a click reaction of the azido‐terminated diblock copolymers and the propargyl‐terminated MPEO in the presence of CuBr and 1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) catalyst system. The structures of these ABA′ block copolymers and corresponding precursors were characterized by NMR, IR, and GPC. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and self-association in aqueous media of poly(ethylene oxide)/poly(ethyl glycidyl carbamate) amphiphilic block copolymers

New temperature sensitive AB, ABA, and BAB amphiphilic block copolymers consisting of hydrophilic poly(ethylene oxide) and hydrophobic poly(ethyl glycidyl carbamate) blocks were synthesized by anionic polymerization followed by chemical modification reactions. The self-association of the block copolymers in aqueous media was studied by UV-vis spectroscopy and dynamic and static light scattering. The obtained block copolymers spontaneously form micelles in aqueous media. The critical micellization concentration varied from 0.5 to 4 g/L depending on the copolymer architecture and composition. The influence of the temperature upon the self-association of the block copolymers was investigated. The increase of temperature did not affect the value of the critical micellization concentration, but led to the formation of better defined micelles with narrow size distribution.     

Vesicular and micellar self‐assembly of stimuli‐responsive poly(N‐isopropyl acrylamide‐b‐9‐anthracene methyl methacrylate) amphiphilic diblock copolymers

Dually responsive amphiphilic diblock copolymers consisting of hydrophilic poly(N‐isopropyl acrylamide) [poly(NIPAAm)] and hydrophobic poly(9‐anthracene methyl methacrylate) were synthesized by reversible addition fragmentation chain‐transfer (RAFT) polymerization with 3‐(benzyl sulfanyl thiocarbonyl sulfanyl) propionic acid as a chain‐transfer agent. In the first step, the poly(NIPAAm) chain was grown to make a macro‐RAFT agent, and in the second step, the chain was extended by hydrophobic 9‐anthryl methyl methacrylate to yield amphiphilic poly(N‐isopropyl acrylamide‐b‐9‐anthracene methyl methacrylate) block copolymers. The formation of copolymers with three different hydrophobic block lengths and a fixed hydrophilic block was confirmed from their molecular weights. The self‐assembly of these copolymers was studied through the determination of the lower critical solution temperature and critical micelle concentration of the copolymers in aqueous solution. The self‐assembled block copolymers displayed vesicular morphology in the case of the small hydrophobic chain, but the morphology gradually turned into a micellar type when the hydrophobic chain length was increased. The variations in the length and chemical composition of the blocks allowed the tuning of the block copolymer responsiveness toward both the pH and temperature. The resulting self‐assembled structures underwent thermally induced and pH‐induced morphological transitions from vesicles to micelles and vice versa in aqueous solution. These dually responsive amphiphilic diblock copolymers have potential applications in the encapsulation of both hydrophobic and hydrophilic drug molecules, as evidenced from the dye encapsulation studies. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46474.     

AB‐ and ABC‐type di‐ and triblock copolymers of poly[styrene‐block‐(ε‐caprolactone)] and poly[styrene‐block‐(ε‐caprolactone)‐block‐lactide]: synthesis,characterization and thermal studies

Polystyrene terminated with benzyl alcohol units was employed as a macroinitiator for ring‐opening polymerization of ε‐caprolactone and L ‐lactide to yield AB‐ and ABC‐type block copolymers. Even though there are many reports on the diblock copolymers of poly(styrene‐block‐lactide) and poly(styrene‐block‐lactone), this is the first report on the poly(styrene‐block‐lactone‐block‐lactide) triblock copolymer consisting of two semicrystalline and degradable segments. The triblock copolymers exhibited twin melting behavior in differential scanning calorimetry (DSC) analysis with thermal transitions corresponding to each of the lactone and lactide blocks. The block derived from ε‐caprolactone also showed crystallization transitions upon cooling from the melt. In the DSC analysis, one of the triblock copolymers showed an exothermic transition well above the melting temperature upon cooling. Thermogravimetric analysis of these block copolymers showed a two‐step degradation curve for the diblock copolymer and a three‐step degradation for the triblock copolymer with each of the degradation steps associated with each segment of the block copolymers. The present study shows that it is possible to make pure triblock copolymers with two semicrystalline segments which also consist of degradable blocks. Copyright © 2009 Society of Chemical Industry     

Synthesis,photophysical properties and microphase separation of all‐conjugated diblock copolymers with hydrophilic side chains

A series of new all‐conjugated diblock copolymers, poly(2,5‐dioctyloxy‐p‐phenylene)‐block‐poly(3‐methoxyethoxyethoxy‐methylthiophene) (PPP‐b‐P3MEEMT), with hydrophilic side‐chains have been synthesized by quasi‐living Grignard metathesis polymerization. The narrow polydispersity indices of the block copolymers are in the range 1.32–1.40. The block ratios in the obtained diblock copolymers can be well defined by the feed ratios of the monomers. Photoluminescence results reveal that resonance energy transfer occurs from the PPP block to the P3MEEMT block in dilute solution. Differential scanning calorimetry shows that both PPP and P3MEEMT blocks in the copolymers produce crystalline regions and lead to microphase separation as indicated by two endothermal transitions, corresponding to the melting peaks of the PPP and P3MEEMT blocks, respectively. The formations of microphase‐separated nanostructures in annealed copolymer films are also observed using transmission electron microscopy. © 2012 Society of Chemical Industry     

Synthesis of cationic amphiphilic diblock copolymers of poly(vinylbenzyl triethylammonium chloride) and polystyrene by reverse iodine transfer polymerization (RITP)

A new method called reverse iodine transfer polymerization (RITP), based on the in situ generation of transfer agents using molecular iodine I₂, was applied to the synthesis of poly(vinylbenzyl chloride). Well-defined diblock copolymers poly(vinylbenzyl chloride)-b-polystyrene with different chain lengths were then successfully produced through sequential polymerization of styrene. The polydispersity index values M_w/M_n ranged from 1.4 to 1.6 for all the homopolymers and diblock copolymers. The diblock copolymers could be synthesized with equally good results by starting with either poly(vinylbenzyl chloride) or polystyrene as macrotransfer agents. The diblock copolymers were then quaternized with triethylamine to prepare cationic amphiphilic diblock copolymers.     

Synthesis and characterization of diblock,triblock, and multiblock copolymers containing poly(3‐hydroxy butyrate) units

A poly[(R,S)‐3‐hydroxybutyrate] macroinitiator (PHB‐MI) was obtained through the condensation reaction of poly[(R,S)‐3‐hydroxybutyrate] (PHB) oligomers containing dihydroxyl end functionalities with 4,4′‐azobis(4‐cyanopentanoyl chloride). The PHB‐MI obtained in this way had hydroxyl groups at two end of the polymer chain and an internal azo group. The synthesis of ABA‐type PHB‐b‐PMMA block copolymers [where A is poly(methyl methacrylate) (PMMA) and B is PHB] via PHB‐MI was accomplished in two steps. First, multiblock active copolymers with azo groups (PMMA‐PHB‐MI) were prepared through the redox free‐radical polymerization of methyl methacrylate (MMA) with a PHB‐MI/Ce(IV) redox system in aqueous nitric acid at 40°C. Second, PMMA‐PHB‐MI was used in the thermal polymerization of MMA at 60°C to obtain PHB‐b‐PMMA. When styrene (S) was used instead of MMA in the second step, ABCBA‐type PMMA‐b‐PHB‐b‐PS multiblock copolymers [where C is polystyrene (PS)] were obtained. In addition, the direct thermal polymerization of the monomers (MMA or S) via PHB‐MI provided AB‐type diblocks copolymers with MMA and BCB‐type triblock copolymers with S. The macroinitiators and block copolymers were characterized with ultraviolet–visible spectroscopy, nuclear magnetic resonance spectroscopy, gel permeation chromatography, cryoscopic measurements, and thermogravimetric analysis. The increases in the intrinsic viscosity and fractional precipitation confirmed that a block copolymer had been obtained. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1789–1796, 2004     

Well-defined phosphonated homo- and copolymers via direct ring opening metathesis polymerization

Phosphonated polymers with a well-defined molecular weight, composition and architecture have been prepared via ring opening metathesis polymerization (ROMP) of phosphonated and non-phosphonated norbornene imides at room temperature for the first time. ROMP was proven to be living and versatile. This enabled preparation of a broad range of phosphonated homopolymers, statistical copolymers, AB diblock as well as ABA and BAB triblock copolymers based on poly(norbornene imide)s with low polydispersity (1.09–1.32). Complete hydrolysis of phosphonated poly(norbornene imide)s under mild conditions yielded the phosphonic acid derivatives. Thermogravimetric analysis indicated high thermal and thermo-oxidative stability of the polymers. Free standing and transparent films with good mechanical stability were obtained from the phosphonic acid functional homopolymers, diblock and triblock copolymers. Combining these basic properties with the advantages mentioned above makes ROMP a promising pathway for accessing a wide diversity of phosphonated macromolecular structures. These new phosphonated polymers will open new perspectives in advanced application areas, which require a high level of control over polymer structure.     

Chemoenzymatic synthesis of the novel amphiphilic diblock copolymer poly[caprolactone‐block‐(glycidyl methacrylate)] from a bifunctional initiator and its micellization behavior

The chemoenzymatic synthesis of a novel diblock copolymer consisting of a hydrocarbon block of polycaprolactone (PCL) and an epoxy‐based block of poly(glycidyl methacrylate) (PGMA) was achieved by the combination of enzymatic ring‐opening polymerization (eROP) and atom transfer radical polymerization (ATRP). A trichloromethyl‐terminated PCL macrointiator was obtained via Novozyme 435‐catalyzed eROP of ε‐caprolactone from a bifunctional initiator, 2,2,2‐trichloroethanol, under anhydrous conditions. PCL‐b‐PGMA diblock copolymers were synthesized in a subsequent ATRP of glycidyl methacrylate. The kinetics analysis of ATRP indicated a ‘living’/controlled radical polymerization. The macromolecular structure and thermal properties of the PCL macroinitiator and of the diblock copolymer were characterized using NMR spectroscopy, gel permeation chromatography and differential scanning calorimetry. The well‐defined PCL‐b‐PGMA amphiphilic diblock copolymer self‐assembled in aqueous solution into nanoscale micelles. The size and shape of the resulting micelles were investigated using dynamic light scattering, transmission electron microscopy and tapping‐mode atomic force microscopy. Copyright © 2007 Society of Chemical Industry     

Design of novel poly(methyl vinyl ether) containing AB and ABC block copolymers by the dual initiator strategy

A new set of block copolymers containing poly(methyl vinyl ether) (PMVE) on one hand and poly(tert-butyl acrylate), poly(acrylic acid), poly(methyl acrylate) or polystyrene on the other hand, have been prepared by the use of a novel dual initiator 2-bromo-(3,3-diethoxy-propyl)-2-methylpropanoate. The dual initiator has been applied in a sequential process to prepare well-defined block copolymers of poly(methyl vinyl ether) (PMVE) and hydrolizable poly(tert-butyl acrylate) (PtBA), poly(methyl acrylate) (PMA) or polystyrene (PS) by living cationic polymerization and atom transfer radical polymerization (ATRP), respectively. In a first step, the Br and acetal end groups of the dual initiator have been used to generate well-defined homopolymers by ATRP (resulting in polymers with remaining acetal function) and living cationic polymerization (PMVE with pendant Br end group), respectively. In a second step, those acetal functionalized polymers and PMVE-Br homopolymers have been used as macroinitiators for the preparation of PMVE-containing block copolymers. After hydrolysis of the tert-butyl groups in the PMVE-b-ptBA block copolymer, PMVE-b-poly(acrylic acid) (PMVE-b-PAA) is obtained. Chain extension of the AB diblock copolymers by ATRP gives rise to ABC triblock copolymers. The polymers have been characterized by MALDI-TOF, GPC and ¹H NMR.     

Chemoenzymatic synthesis of Y‐shaped amphiphilic block copolymers and their micellization behavior

BACKGROUND: Y‐shaped block copolymers are a type of special star polymer that have received considerable attention due to their unique morphologies and phase behavior. This research is based on the preparation of novel Y‐shaped block copolymers using enzymatic ring‐opening polymerization (eROP) and atom‐transfer radical polymerization (ATRP), followed by an investigation of their micellization properties. RESULTS: Y‐shaped block copolymers consisting of polycaprolactone and poly(glycidyl methacrylate) were synthesized successfully by the combination of eROP and ATRP. NMR, gel permeation chromatography (GPC), Fourier transform infrared and atomic force microscopy analyses confirmed the compositions of the block copolymers. The dispersity obtained from GPC was less than 1.4, which indicated a control of the polymerization. The self‐assembly behavior of the Y‐shaped block copolymers was investigated in aqueous media. Aggregates of various morphologies (such as spherical micelles, lamellae, worm‐like micelles and large compound micelles) were observed. In addition, it was found that both the copolymer composition and concentration in tetrahydrofuran greatly influenced the morphologies of the aggregates. CONCLUSION: The results suggest that the Y‐shaped diblock copolymers can be synthesized by simple methods. They have various morphologies, including normal spherical micelles, lamellae, worm‐like micelles and large compound micelles. Copyright © 2009 Society of Chemical Industry     

The melt rheological behavior of AB,ABA, BAB,and (AB)n block copolymers with monodisperse aramide segments

The melt rheological behavior of segmented block copolymers with high melting diamide (A) hard segments (HS) and polyether (B) soft segments was studied. The block copolymers can be classified as B (monoblock), AB (diblock), ABA (triblock, diamide end segment), BAB (triblock, diamide mid‐segment) and ? (AB)_n? (multiblock) block copolymers. Varied were the number of HS in the chain, the HS concentration, the position of the HS (in the chain or at the end of the chain) and the molecular weight of the copolymers. The melt rheological behavior of the copolymers was studied with a plate–plate method. The materials B (monoblock), BAB (triblock, diamide mid‐segment), and ? (AB)_n? (multiblock) block copolymers had a rheological behavior of a linear polymer and the complex viscosity increased with molecular weight. Surprisingly, the diblock copolymers AB and the triblock copolymers ABA at low frequencies and near the melting temperature of the copolymers had the behavior of a gelled melt. The diamide segments at the chain end seemed to form aggregates, whereas the diamide mid‐segments did not. Also, time‐dependent rheology of diblock copolymer confirmed the network structure built up in the melt. The block copolymers with H‐bonding diamide end segments had a thixotropic behavior. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

Two‐component “Onionlike” micelles with a PPO core,a PDMAEMA shell and a PEO corona: formation and crosslinking

BACKGROUND: Chemical or physical crosslinking of supramolecular assemblies gives them stability in a wide range of environments. Much attention is paid to multilayer (onion‐like) polymeric micelles because their functionality is higher than classic core‐shell micelles. This work reports on the formation and crosslinking of onion‐like micelles prepared by mixing two different block copolymers containing a crosslinkable poly(dimethylaminoethyl methacrylate) (PDMAEMA) block. RESULTS: Block copolymers of a crosslinkable PDMAEMA block were synthesized by atom transfer radical polymerization of 2‐(dimethylamino)ethyl methacrylate (DMAEMA) from poly(propylene oxide) (PPO) or poly(ethylene oxide) (PEO) macroinitiators. The (PDMAEMA₁₃)‐block‐PPO₆₉‐block‐(PDMAEMA₁₃) triblock formed wormlike core‐shell micelles, which were converted into ellipsoidal onion‐like micelles on mixing with the PEO₄₅‐block‐P(DMAEMA₈‐co‐MMA₄) diblock. Onion‐like micelles were crosslinked by quaternization of DMAEMA units. CONCLUSION: Formation of onion‐like micelles by mixing two different AB (ABA) and B′C block copolymers and their subsequent crosslinking is a valuable approach towards stabilized supramolecular assemblies of a higher complexity and functionality than the individual constitutive components. Copyright © 2008 Society of Chemical Industry     

Synthesis and characterization of copolymers with the same proportions of polystyrene and poly(ethylene oxide) compositions but different connection sequence by the efficient Williamson reaction

The AB type diblock PS‐b‐PEO and ABA type triblock PS‐b‐PEO‐b‐PS copolymers containing the same proportions of polystyrene (PS) and poly(ethylene oxide) (PEO) but different connection sequence were synthesized and investigated. Using the sequential living anionic polymerization and ring‐opening polymerization mechanisms, diblock PS‐b‐PEO copolymers with one hydroxyl group at the PEO end were obtained. Then, using the classic and efficient Williamson reaction (realized in a ‘click’ style), triblock PS‐b‐PEO‐b‐PS copolymers were achieved by a coupling reaction between hydroxyl groups at the PEO end of PS‐b‐PEO. The PS‐b‐PEO and PS‐b‐PEO‐b‐PS copolymers were well characterized by ¹H NMR spectra and SEC measurements. The critical micelle concentration (CMC) and thermal behaviors were also investigated by steady‐state fluorescence spectra and DSC, respectively. The results showed that, because the PEO segment in triblock PS‐b‐PEO‐b‐PS was more restricted than that in diblock PS‐b‐PEO copolymer, the former PS‐b‐PEO‐b‐PS copolymer always gave higher CMC values and lower crystallization temperature (T_c), melting temperature (T_m) and degree of crystallinity (X_c) parameters. © 2015 Society of Chemical Industry     

Nanostructured latex particles synthesized by nitroxide-mediated controlled/living free-radical polymerization in emulsion

Suspensions of diblock and triblock copolymer particles comprising a poly(n-butyl acrylate) first/central block and polystyrene or poly(methyl methacrylate) second/outer blocks were synthesized by nitroxide-mediated controlled/living free-radical emulsion polymerization. Monofunctional and difunctional alkoxyamines based on the nitroxide SG1 were used as initiators. For the sake of simplicity, sequential monomer additions were performed without any removal of unreacted monomer. Self-assembly of the obtained block copolymers was investigated both under the latex form as well as after different thermal treatments. AFM and TEM analyses revealed the occurrence of “onion-like” lamellar microphases directly inside latex particles for high enough copolymer molar masses and irrespective of molar mass distribution. This particular organization evolved towards more classical block copolymer morphologies upon solvent casting and/or thermal annealing of latex films.     

Nitroxide‐mediated ‘living’ free radical synthesis of novel rod–coil diblock copolymers with polystyrene and mesogen‐jacketed liquid‐crystal polymer segments

The synthesis of rod–coil diblock copolymers with narrow polydispersity was achieved for the first time by TEMPO‐mediated ‘living’ free radical polymerization of styrene and 2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene. The block architecture of the two diblock copolymers thus prepared, MPCS‐block‐St (5400/2400) and MPCS‐block‐St (10 800/8700), was confirmed by GPC, ¹H and ¹³C NMR and DSC studies. The liquid‐crystalline behaviour of the copolymers was studied by DSC and polarized optical microscope. It was observed that both copolymers showed two distinct glass transitions, corresponding to polystyrene and poly(‐2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene). Above the glass transition temperature of rigid block, liquid‐crystalline phase was formed. The clearing point of the phase is higher than the polymer decomposition temperature. © 2000 Society of Chemical Industry     

Living carbocationic polymerization of isobutylene and synthesis of ABA block copolymers by conventional laboratory techniques

Summary Living polymerization of isobutylene (IB) and subsequent controlled synthesis of ABA block copolymers, such as poly(styrene-b-isobutylene-b-styrene) (PSt-PIB-PSt) and poly(p-methylstyrene-b-isobutylene-b-p-methylstyrene) (PpMeSt-PIB-PpMeSt), have been carried out by a simple and inexpensive conventional laboratory technique. The homo- and block copolymers obtained by using this technique have exhibited excellent molecular weight control and low polydispersity indexes. The living nature of IB polymerization has been demonstrated by the incremental monomer addition (IMA) method with the dicumyl methyl ether (DiCumOMe)/TiCl₄ initiating system in the presence of 2,5-di-tert-butylpyridine (DtBP) proton trap. PSt-PIB-PSt and PpMeSt-PIB-PpMeSt block copolymers have been synthesized by sequential monomer addition: first living difunctional polyisobutylene (PIB) midsegment was prepared by difunctional initiator, then the second monomer was added to the charge. High blocking efficiencies and desired block copolymer structures have been obtained.     

Synthesis and characterization of poly(ϵ‐caprolactone)–poly(L‐lactide) diblock copolymers with an organic amino calcium catalyst

The quasiliving characteristics of the ring‐opening polymerization of ?‐caprolactone (CL) catalyzed by an organic amino calcium were demonstrated. Taking advantage of this feature, we synthesized a series of poly(?‐caprolactone) (PCL)–poly(L ‐lactide) (PLA) diblock copolymers with the sequential addition of the monomers CL and L ‐lactide. The block structure was confirmed by ¹H‐NMR, ¹³C‐NMR, and gel permeation chromatography analysis. The crystalline structure of the copolymers was investigated by differential scanning calorimetry and wide‐angle X‐ray diffraction analysis. When the molecular weight of the PLA block was high enough, phase separation took place in the block copolymer to form PCL and PLA domains, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2654–2660, 2006     

Influence of semi‐crystalline poly(ε‐caprolactone) and non‐crystalline polylactide blocks on the thermal properties of polydimethylsiloxane‐based block copolymers

Poly(A)‐block‐poly(B), poly(A)‐block‐poly(B)‐block‐poly(A) and B(A)₂ block copolymers were prepared through coordinated anionic ring‐opening polymerization of ε‐caprolactone (CL) and lactic acid (LA) using hydroxy‐terminated polydimethylsiloxane (PDMS) as initiator. A wide range of well‐defined combinations of PDMS‐block‐PCL and PDMS‐block‐PLA diblock copolymers, PCL‐block‐PDMS‐block‐PCL and PLA‐block‐PDMS‐block‐PLA triblock copolymers and star‐PDMS(PCL)₂ copolymers were thus obtained. The number‐average molar masses and the structure of the synthesized block copolymers were identified using various analytical techniques. The thermal properties of these copolymers were established using differential scanning calorimetry. Considering PDMS‐block‐PCL copolymers, the results demonstrate the complex effect of polymer architecture and PCL block length on the ability of the PDMS block to crystallize or not. In the case of diblock copolymers, crystallization of PCL blocks originated from stacking of adjacent chains inducing the extension of the PDMS block that can easily crystallize. In the case of star copolymers, the same tendency as in triblock copolymers is observed, showing a limited crystallization of PDMS when the length of the PCL block increases. In the case of PDMS‐block‐PLA copolymers, melting and crystallization transitions of the PLA block are never observed. Considering the diblock copolymers, PDMS sequences have the ability to crystallize. © 2019 Society of Chemical Industry     

Synthesis and characterization of amphiphilic block copolymers of methyl methacrylate with poly(ethylene oxide) macroinitiators formed by atom transfer radical polymerization

Amphiphilic ABA triblock copolymers of poly(ethylene oxide) (PEO) with methyl methacrylate (MMA) were prepared by atom transfer radical polymerization in bulk and in various solvents with a difunctional PEO macroinitiator and a Cu(I)X/N,N,N′,N″,N″‐pentamethyldiethylenetriamine catalyst system at 85°C where X=Cl or Br. The polymerization proceeded via controlled/living process, and the molecular weights of the obtained block copolymers increased linearly with monomer conversion. In the process, the polydispersity decreased and finally reached a value of less than 1.3. The polymerization followed first‐order kinetics with respect to monomer concentration, and increases in the ethylene oxide repeating units or chain length in the macroinitiator decreased the rate of polymerization. The rate of polymerization of MMA with the PEO chloro macroinitiator and CuCl proceeded at approximately half the rate of bromo analogs. A faster rate of polymerization and controlled molecular weights with lower polydispersities were observed in bulk polymerization compared with polar and nonpolar solvent systems. In the bulk polymerization, the number‐average molecular weight by gel permeation chromatography (M_n,GPC) values were very close to the theoretical line, whereas lower than the theoretical line were observed in solution polymerizations. The macroinitiator and their block copolymers were characterized by Fourier transform infrared spectroscopy, ¹H‐NMR, matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry, thermogravimetry (TG)/differential thermal analysis (DTA), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). TG/DTA studies of the homo and block copolymers showed two‐step and multistep decomposition patterns. The DSC thermograms exhibited two glass‐transition temperatures at ?17.7 and 92°C for the PEO and poly(methyl methacrylate) (PMMA) blocks, respectively, which indicated that microphase separation between the PEO and PMMA domains. SEM studies indicated a fine dispersion of PEO in the PMMA matrix. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 989–1000, 2005