共查询到19条相似文献,搜索用时 718 毫秒
1.
2.
对质子交换膜燃料电池膜材料的重要性、性能要求以及TRIZ理论的核心思想、基本发明原理进行了介绍,并结合实际技术内容,通过TRIZ理论的标准求解过程,即参数选择、矛盾矩阵分析和发明原理求解印证了质子交换膜燃料电池的膜材料性能改进研究的实际发展历程。由求解过程和结论可知,基于TRIZ理论推导过程给出的相关发明原理能够合理预测膜材料导电性、稳定性的发展趋势;通过掌握TRIZ理论,能够更有针对性地寻找对膜材料改进的可行之路。对于质子交换膜而言,至少可以在提纯工艺、遴选工艺以及燃料电池组件协同功能性方面寻找提升性能的途径。 相似文献
3.
4.
TRIZ理论是研究人类解决技术难题、进行发明创造过程中所遵循的科学原理和法则。文章简要介绍了TRIZ理论,详细分析如何将TRIZ理论应用于环境监测开放式实验平台。TRIZ理论在构建环境监测开放式实验平台中的应用,对激发学生学习兴趣,提高学生创新能力具有重要的作用。 相似文献
5.
TRIZ的40个发明原理在化工行业中的体现 总被引:2,自引:2,他引:0
TRIZ理论是Altshuller在分析了大量专利的基础上提出的,40个创新发明原理是其中的重要内容之一,包括分割、抽取、局部质量特性等原理。理论认为尽管很多专利虽然来自不同国家、不同领域,而且解决的也是不同的问题,实现的是对不同系统的改进,但是,这些专利是利用了某些相同的方法。也就是说,很多的原理和方法在发明的过程中是重复使用的。笔者根据发明原理的内容并结合工作实际,归纳总结了TRIZ的40个发明原理在化工行业中的实际体现。 相似文献
6.
TRIZ是一种解决创新发明问题的理论和工具,它由前苏联发明家Altshuller提出,并在世界范围内得到认可和广泛应用。TRIZ的核心内容之一是40个发明原理,这些原理来自于对大量专利的归纳总结,并且可以作为通用型的解决方法应用到不同领域。作者根据对于TRIZ理论的理解,结合工作实际,总结出40个发明原理在塑料行业,尤其是塑料产品开发和应用中的实际体现。 相似文献
7.
8.
“发明问题解决理论”(TRIZ)的起源出自于前苏联对工程和实用专利的分析。因此,“发明问题解决理论”(TRIZ)的40条发明原理的创建可用于解决工程问题。之后,人们做了大量的工作,试图将这些发明原理的应用范围扩大到非工程领域.例如:商业、个人或健康方面的“软”问题。 相似文献
9.
介绍了TRIZ理论的发展历史及利用该理论解决问题的思路,结合工作实际,列举了TRIZ的40个发明原理在生物化工中的应用举例。 相似文献
10.
11.
12.
采用异丙醇铝水解法制备氧化铝,考察了多种因素对氧化铝物化性质的影响。用X射线衍射、氮物理吸附、扫描电镜等方法分析了所得样品的晶相结构、孔结构以及微观形貌。试验结果表明:异丙醇铝在不同条件下水解均能制备出高纯的拟薄水铝石;提高水解温度有利于提高所制备氧化铝的孔径以及孔容;低水解液浓度有利于制备大孔容的氧化铝,而高水解液浓度有利于制备小孔容的氧化铝;水与异丙醇铝比例在2:1~4:1时拟薄水铝石和氧化铝比表面积和孔容达到最大;水解时间为3~4 h是制备高比表面积和大孔容拟薄水铝石和氧化铝的最佳时间。 相似文献
13.
Seung-Joon Yoo Ho-Sung Yoon Hee Dong Jang Jung-Woon Lee Seung-Tae Hong Min-Jae Lee Se-Il Lee Ki-Won Jun 《Korean Journal of Chemical Engineering》2006,23(4):683-687
Synthetic reaction of aluminum isopropoxide, which is used as a starting material for catalytic-grade alumina, has been studied
in the presence of a small amount of HgI2, HgCl2, I2 or FeCl3 from aluminum dross. It was synthesized by solid-liquid reaction between the aluminum metal and isopropyl alcohol, using
vacuum distillation process. The purity of the synthesized aluminum isopropoxide was obtained over 97.6% experimentally, which
had been analyzed quantitatively by complexometric method. The initial amount of sodium, which directly affects the catalytic
activation in the alumina catalyst, was in the range of 0.926 to 1.563 wt% in the aluminum dross. Finally, it was decreased
to 0.007 wt% in the aluminum isopropoxide product. Yield was changed according to the amount of aluminium existing in the
aluminum dross. Aluminum could mostly be recovered regardless of the amount of aluminium existing in the aluminum dross. 相似文献
14.
Synthesis of stable boehmite sols and structural properties of the sol–gel-derived γ-alumina using alkoxides, commercial boehmite powders, and aluminum chloride were studied for cost-effective preparation of high quality γ-alumina granules. Stable boehmite sols could be prepared from aluminum butoxide, aluminum isopropoxide, and commercial boehmite powders but not from aluminum chloride. The stable sol-derived γ-alumina has large surface area and nanopore size with uniform pore size distributions. Mesoporous spherical γ-alumina granules were prepared by an oil-drop process from aluminum butoxide, aluminum isopropoxide and a commercial boehmite powder under specific conditions. The sol–gel-derived γ-alumina granules are better than the commercial γ-alumina granules in terms of the pore structure and mechanical strength. The successful synthesis of γ-alumina granules by the sol–gel method from the commercial boehmite powder provides a basis for large-scale, cost-effective production of the high quality γ-alumina granules for use as sorbents or catalysts in industrial processes. 相似文献
15.
采用异丙醇铝水解制备拟薄水铝石,考察用水量[n(水)∶n(异丙醇)为2∶1~4.5∶1]、水解时间(0~3 h)、干燥温度(75~120 ℃)、干燥时间(2 ~10 h)对拟薄水铝石碳含量、晶相、胶溶指数和水化效果的影响。结果表明,制备条件的改变都会影响产物的碳含量,其中用水量影响最为明显。用水量不断增大,产物的结晶度提高,胶溶指数由2.3%增大到95%以上;延长水解时间有利于产物晶粒的生长和胶溶指数的提高(由35.4%增大到65%以上);干燥温度和干燥时间对产物的晶型和胶溶指数影响较小。此外,产物水化后胶溶指数均大幅度提高,水解过程用水量[n(水)∶n(异丙醇)]大于3∶1时,水化后胶溶指数均能达到99%以上,为异丙醇铝水解制备拟薄水铝石的工业化提供相应的研究基础。 相似文献
16.
本文以正硅酸乙酯(TEOS)、异丙醇铝(AIP)、硝酸铝(AN)等为原料,用溶胶-凝胶(so1-ge1)法制备硅酸铝耐火纤维. 相似文献
17.
简要介绍了异丙醇与铝合成异丙醇铝的原理及工业化生产工艺,探讨了催化剂类型及用量、异丙醇中的水含量、铝中铁杂质含量及减压蒸馏条件对生产及产品质量的影响,指出了实际生产中需要从那些方面进行控制,并提供了控制方法。 相似文献
18.
The rapid hydrolysis of some alkoxides creates problems in alcohol-based sol–gel processes. This paper describes a simple aqueous sol–gel process for the synthesis of barium aluminosilicate gels and gel-derived glasses, in which the problem of the rapid hydrolysis of aluminum isopropoxide (the source of aluminum) is solved by a precipitation–peptization process that is cost effective. Tetraethylorthosilicate, aluminum isopropoxide, and barium acetate are used as the starting materials, and water is the solvent. The molecular network, crystallization behavior, weight-loss, and thermal characteristics of the gel and the gel-derived glass have been detected by Raman spectroscopy, XRD, DTA, and TGA. 相似文献