Characterization of 4,6‐Diazido‐N‐nitro‐1,3,5‐triazine‐2‐amine

4,6‐Diazido‐N‐nitro‐1,3,5‐triazine‐2‐amine (DANT) was prepared with a 35 % yield from cyanuric chloride in a three step process. DANT was characterized by IR and NMR spectroscopy (¹H, ¹³C, ¹⁵N), single‐crystal X‐ray diffraction, and DTA. The crystal density of DANT is 1.849 g cm⁻³. The cyclization of one azido group and one nitrogen atom of the triazine group giving tetrazole was observed for DANT in a dimethyl sulfoxide solution using NMR spectroscopy. An equilibrium exists between the original DANT molecule and its cyclic form at a ratio of 7 : 3. The sensitivity of DANT to impact is between that for PETN and RDX, sensitivity to friction is between that for lead azide and PETN, and sensitivity to electric discharge is about the same as for PETN. DANT′s heat of combustion is 2060 kJ mol⁻¹.     

An Ab Initio Theoretical Study of 2,4,6‐Trinitro‐1,3,5‐Triazine, 3,6‐Dinitro‐1,2,4,5‐Tetrazine,and 2,5,8‐Trinitro‐Tri‐s‐Triazine

In order to evaluate 2,4,6‐trinitro‐1,3,5‐triazine (TNTAz), 3,6‐dinitro‐1,2,4,5‐tetrazine (DNTAz), and 2,5,8‐trinitro‐tri‐s‐triazine (TNTsTAz), the geometries of these compounds have been fully optimized employing the B3LYP density functional method and the AUG‐cc‐pVDZ basis set. The accurate gas phase enthalpies of formation have been obtained by using the atomization procedure and designing isodesmic reactions in which the parent rings are not destroyed. Based on B3LYP/AUG‐cc‐pVDZ calculated geometries and natural charges, the crystal structures have been predicted using the Karfunkel–Gdanitz method. Computed results show that there exists extended conjugation over the parent rings of these compounds. More energy content is reserved in DNTAz than in both TNTAz and TNTsTAz. The title compounds are much more sensitive than 1,3,5‐trinitrobenzene. The calculated detonation velocity of DNTAz reaches 9.73–9.88 km s⁻¹, being larger than those of CL‐20 and TNTAz. TNTsTAz has no advantage over the widely used energetic compounds such as RDX and HMX.     

Lecithin‐enhanced biotransformation of cholesterol to androsta‐1,4‐diene‐3,17‐dione and androsta‐4‐ene‐3,17‐dione

A biotransformation process using Mycobacterium sp was studied for androsta‐1, 4‐diene‐3,17‐dione (ADD) and androsta‐4‐ene‐3,17‐dione (AD) production from cholesterol. Cholesterol has a poor solubility in water (～1.8 mg dm^?3 at 25 °C), which makes it difficult to use as the substrate for biotransformation. Lecithin is a mixture of phospholipids of phosphatidylcholine (PC) and phosphatidylethanolamine (PE), which behave like surfactants and can form planar bi‐layer structures in an aqueous medium. Therefore, a small amount of lecithin (<1 g dm^?3) can be used to form stable colloids with cholesterol at a relatively high concentration (20 g dm^?3) in water. In this work, an energy density of 1000 J cm^?3 from sonication was provided to overcome the self‐association of cholesterol and to generate a stable lecithin–cholesterol suspension that could be used for enhanced biotransformation. The lecithin–cholesterol suspension was stable and could withstand typical autoclaving conditions (121 °C, 15 psig, 20 min). In contrast to conventional surfactants, such as Tween 80, that are commonly used to help solubilize cholesterol, lecithin did not change the surface tension of the aqueous solution nor cause any significant foaming problem. Lecithin was also biocompatible and showed no adverse effect on cell growth. Compared with the medium with Tween 80 as the cholesterol‐solubilizing agent, lecithin greatly improved the biotransformation process in regard to its final product yield (～59% w/w), productivity (0.127–0.346 g dm^?3 day^?1), ADD/AD ratio (6.7–8), as well as the long‐term process stability. Cells can be reused in repeated batch fermentations for up to seven consecutive batches, but then lose their bioactivity due to aging problems, possibly caused by product inhibition and nutrient depletion. © 2002 Society of Chemical Industry     

Poly(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)‐diphenylsiloxane‐poly(dimethylsiloxane) block copolymers

The heterofunctional condensation of 1,3‐dichloro‐1,3‐disila‐1,3‐diphenyl‐2‐oxaindane with dihydroxydiphenylsilane at various ratios of initial compounds in the presence of amines was carried out, and α,ω‐dihydroxy(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)‐diphenylsiloxane oligomers with various degrees of condensation were obtained. Corresponding block copolymers were obtained by heterofunctional polycondensation of synthesized α,ω‐dihydroxy(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)‐diphenylsiloxane oligomers with α,ω‐dichlorodimethylsiloxanes in the presence of amines. Thermogravimetry, gel permeation chromatography, differential scanning calorimetry, and wide‐angle X‐ray analysis were carried out on the synthesized block coplymers. Differential scanning calorimetry and wide‐angle X‐ray studies of these copolymers showed that their properties were determined by the ratio of the lengths of the flexible linear poly(dimethylsiloxane) and rigid poly(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)‐diphenylsiloxane fragments in the main macromolecular chain. Two‐phase systems were obtained with specific flexible and rigid fragment length values in synthesized block copolymers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3462–3467, 2006     

Crystallization behavior of 1,3‐dipalmitoyl‐2‐oleoyl‐glycerol and 1‐palmitoyl‐2,3‐dioleoyl‐glycerol

A model margarine was stored under a temperature fluctuation cycle of 5—20 °C until granular crystals were observed. Using information obtained from the granular crystals, the crystallization behaviors of major triacylglycerols of palm oil, 1,3‐dipalmitoyl‐2‐oleoyl‐glycerol (POP), 1‐palmitoyl‐2,3‐dioleoyl‐glycerol (POO), and their mixtures were then investigated. It was shown that in the model margarine, the POP content in the granular crystals was higher than in their surrounding materials, and the X‐ray diffraction pattern of the granular crystals revealed that they were the most stable polymorph, β. 99% pure POP, POO, and their mixtures were then stored under the above‐mentioned temperature cycle. POP was found to form the unstable polymorph, α, when cooled rapidly from the melt. Within 24 hours transformation into the γ polymorph and then into the β polymorph was observed. POO was shown to transform into the β' polymorph from α. When POP and POO were mixed, the β polymorph did not emerge, instead it was shown that POP and POO were both agglomerated in the mixtures, giving rise to the formation of granular crystals.     

Synthesis of novel phosphorous‐containing biphenol, 2‐(5, 5‐dimethyl‐4‐phenyl‐2‐oxy‐1,3,2‐dioxaphosphorin‐6‐yl)‐1,4‐benzenediol and its application as flame‐retardant in epoxy resin

A novel phosphorous‐containing biphenol, 2‐(5,5‐dimethyl‐4‐phenyl‐2‐oxy‐1,3,2‐dioxaphosphorin‐6‐yl)‐ 1,4‐benzenediol (DPODB), was prepared by the addition reaction between 5,5‐dimethyl‐4‐phenyl‐2‐oxy‐1,3,2‐dioxaphosphorinane phosphonate (DPODP) and p‐benzoquinone (BQ). The compound (DPODB) was used as a reactive flame retardant in o‐cresol formaldehyde novolac epoxy resin (CNE) for electronic application. The structure of DPODB was confirmed by FTIR and NMR spectra. Thermal properties of cured epoxy resin were studied using differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). The flame retardancy of cured epoxy resins was tested by UL‐94 vertical test and achieved UL‐94 vertical tests of V‐0 grade (nonflammable). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3842–3847, 2006     

Silver Salt of 4,6‐Diazido‐N‐nitro‐1,3,5‐triazine‐2‐amine – Characterization of this Primary Explosive

A new primary explosive, the silver salt of 4,6‐diazido‐N‐nitro‐1,3,5‐triazine‐2‐amine (AgDANT), was synthesized and characterized. AgDANT was prepared with a 97 % yield and characterized by IR spectroscopy, single‐crystal X‐ray diffraction, and DTA. The crystal density of AgDANT is 2.530 g cm⁻³ and the molecule consists of a centro‐symmetric dimer with a high degree of planarity. The intramolecular Ag Ag distance is relatively low (331 pm) and can be considered as a strong argentophilic interaction. AgDANT is non‐hygroscopic and its solubility in water (1.27 mg in 100 mL at 23 °C) is on a similar level of solubility to that of silver azide. The sensitivity of AgDANT to impact is slightly higher than that for MF, sensitivity to friction is the same as for LA, and sensitivity to electric discharge is between that for LS and MF. Initiation efficiency of AgDANT was tested in electric detonators and compared to dextrinated lead azide (initiation efficiency of AgDANT is 40 mg for PETN secondary charge). The thermal resistance of detonators with AgDANT is satisfactory; all detonators were fully functional after exposure at 65 °C (30 d) and 85 °C (2 d).     

Enzymatic Synthesis of 1‐Alkyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate Using a Novel Lysoplasmalogen‐Specific Phopholipase D

Many phospholipase Ds (PLDs) are known to catalyze transphosphatidylation as well as hydrolysis of phospholipids. Transphosphatidylation of lysoplasmalogen (LyPls)‐specific phospholipase D (LyPls‐PLD), which catalyzes hydrolysis of ether lysophospholipids such as LyPls and 1‐hexadecyl‐2‐hydroxy‐sn‐glycero‐3‐phosphocholine (Lyso‐PAF), still remains unclear. This study aims to reveal the transphosphatidylation activity of LyPls‐PLD, that is, the production of cyclic ether lysophospholipid. The enzymatic reaction is conducted in a buffer system, and the reaction products of a novel LyPls‐PLD from Thermocrispum sp. are investigated using mass spectrometry (MS). MS analyses demonstrate the reaction products to consist of 100% 1‐hexadecyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate (cLyPA) and choline from Lyso‐PAF; however, 1‐alkenyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate from 1‐O‐1′‐(Z)‐octadecenyl‐2‐hydroxy‐sn‐glycero‐3‐phosphocholine and 1‐O‐1′‐(Z)‐octadecenyl‐2‐hydroxy‐sn‐glycero‐3‐phosphoethanolamine is not produced. These results are expected to help in elucidating the catalytic mechanism of LyPls‐PLD, that is, the rate‐limiting step, and indicate LyPls‐PLD to be useful for the one‐pot synthesis of cLyPA. Practical Applications: A novel phospholipase D, LyPls‐PLD, can exclusively synthesize cLyPA from Lyso‐PAF using a one‐step enzymatic reaction without an organic solvent. cLyPA could be expected to show bioactivities similar to those of cyclic phosphatidic acid, which promotes normal cell differentiation, hyaluronic acid synthesis, antiproliferative activity in fibroblasts, and inhibitory activity toward cancer cell invasion and metastasis.     

1‐Amino‐1‐hydrazo‐2,2‐dinitroethene – a Hazard Warning

1‐Amino‐1‐hydrazo‐2,2‐dinitroethene ( 2 ) has been observed to spontaneously decompose with considerable violence during storage. Its preparation and handling should be regarded as potentially hazardous.     

A Highly Regioselective Preparation of 4‐Chloromethyl‐5‐methyl‐2‐aryl‐1,3‐oxazoles

A facile highly regioselective process is described for the formation of 4‐chloromethyl‐1,3‐oxazoles from 1,3‐oxazole N‐oxide/HCl salts. An explanation is presented for the high regioselectivity in deoxygenation‐chlorination using POCl₃ with HCl salts compared to the corresponding free N‐oxides. The method is quite general and the products are isolated by direct precipitation in all cases studied.     

Synergistic extraction of rare earths(III) from chloride medium with mixtures of 1‐phenyl‐3‐methyl‐4‐benzoyl‐pyrazalone‐5 and di‐(2‐ethylhexyl)‐2‐ethylhexylphosphonate

The synergistic effect of 1‐phenyl‐3‐methyl‐4‐benzoyl‐pyrazalone‐5 (HPMBP, HA) and di‐(2‐ethylhexyl)‐2‐ethylhexylphosphonate (DEHEHP, B) in the extraction of rare earths (RE) from chloride solutions has been investigated. Under the experimental conditions used, there was no detectable extraction when DEHEHP was used as a single extractant while the amount of RE(III) extracted by HPMBP alone was also low. But mixtures of the two extractants at a certain ratio had very high extractability for all the RE(III). For example, the synergistic enhancement coefficient was calculated to be 9.35 for Y³⁺, and taking Yb³⁺ and Y³⁺ as examples, RE³⁺ is extracted as RE(OH)A₂.B. The stoichiometry, extraction constants and thermodynamic functions such as Gibbs free energy change ΔG (?17.06 kJ mol^?1), enthalpy change ΔH (?35.08 kJ mol^?1) and entropy change ΔS (?60.47 J K^?1 mol^?1) for Y³⁺ at 298 K were determined. The separation factors (SF) for adjacent pairs of rare earths were calculated. Studies show that the binary extraction system not only enhances the extraction efficiency of RE(III) but also improves the selectivity, especially between La(III) and the other rare earth elements. Copyright © 2006 Society of Chemical Industry     

The High‐Pressure Characterization of Energetic Materials: 1‐Methyl‐5‐Nitramino‐1H‐Tetrazole

Pressure–volume relations and optical Raman and Infrared spectra of polycrystalline 1MNT have been obtained under quasi‐hydrostatic conditions up to 16 and 40 GPa, respectively, by using diamond anvil cell, synchrotron‐based angle‐resolved X‐ray diffraction, and microspectroscopy. The X‐ray measurements show that the pressure–volume relations remain smooth up to 16 GPa at room temperature, while vibrational measurements show no evidence of a phase transition to near 40 GPa. Anomalous increases of several vibrational intensities and bandwidths suggest that subtle molecular distortions and structural modifications occur in the crystal as pressure increases. Decompression experiments indicate the structural modifications are reversible.     

Preparation of 1,3‐Diazido‐2‐Nitro‐2‐Azapropane from Urea

An alternative method to prepare 1,3‐diazido‐2‐nitro‐2‐azapropane (DANP), a promising liquid component for high‐energy condensed systems, is suggested and involves the following stages: (i) nitration of urea, (ii) condensation of the nitration product with formaldehyde, (iii) acylation (chlorination) of 1,3‐dihydroxy‐2‐nitro‐2‐azapropane, (iv) chlorination of 1,3‐diacetoxy‐2‐nitro‐2‐azapropane, and (v) azidation of the dichloro derivative to DANP. This synthesis method is selective and enables isolation of 1,3‐diazido‐2‐nitrazapropane devoid of impurities.     

Synthesis of novel azo‐containing polyureas derived from 4‐[4′‐(2‐hydroxy‐1‐naphthylazo)phenyl]‐1,2,4‐triazolidine‐3,5‐dione

4‐[4′‐(2‐Hydroxy‐1‐naphthylazo)phenyl]‐1,2,4‐triazolidine‐3,5‐dione ( HNAPTD ) ( 1 ) has been reacted with excess amount of n‐propylisocyanate in DMF (N,N‐dimethylformamide) solution at room temperature. The reaction proceeded with high yield, and involved reaction of both N? H of the urazole group. The resulting bis‐urea derivative 2 was characterized by IR, ¹H‐NMR, elemental analysis, UV‐Vis spectra, and it was finally used as a model compound for the polymerization reaction. Solution polycondensation reactions of monomer 1 with Hexamethylene diisocyanate ( HMDI ) and isophorone diisocyanate ( IPDI ) were performed in DMF in the presence of pyridine as a catalyst and lead to the formation of novel aliphatic azo‐containing polyurea dyes, which are soluble in polar solvents. The polymerization reaction with tolylene‐2,4‐diisocyanate ( TDI ) gave novel aromatic polyurea dye, which is insoluble in most organic solvents. These novel polyureas have inherent viscosities in a range of 0.15–0.22 g dL^?1 in DMF at 25°C. Some structural characterization and physical properties of these novel polymers are reported. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 3177–3183, 2001     

Non‐Isothermal Kinetic Study of the Thermal Decomposition of Melamine 3‐Nitro‐1,2,4‐triazol‐5‐one Salt

Study on thermal behavior of 3‐nitro‐1,2,4‐triazol‐5‐one (NTO) salts was required to obtain important data for application purposes. These compounds have been shown to be useful intermediates for gun propellant ingredients, high energetic ballistic modifiers for solid propellants and other potential applications. In this paper, thermal decomposition and non‐isothermal kinetics of melamine 3‐nitro‐1,2,4‐triazol‐5‐one salt (MNTO) were studied under non‐isothermal conditions by DSC and TG methods. The kinetic parameters were obtained from analysis of the DSC and TG curves by Kissinger and Ozawa methods. The critical temperature of thermal explosion (T_b) was 574 K. The results show that MNTO is thermally more stable than NTO when compared in terms of the critical temperature of thermal explosion. Finally, the values of ΔS^#, ΔH^#, and ΔG^# of its decomposition reaction were calculated.     

Catalyst‐Free Domino Reaction of 1‐Acryloyl‐1‐N‐arylcarbamylcyclopropanes with Amines: One‐Pot Approach to 2,3,6,7‐Tetrahydro‐1H‐pyrrolo[3,2‐c]pyridin‐4(5H)‐ones

A facile one‐pot, catalyst‐free reaction has been developed for the synthesis of 2,3,6,7‐tetrahydro‐1H‐pyrrolo[3,2‐c]pyridin‐4(5H)‐ones from readily available 1‐acryloyl‐1‐N‐arylcarbamylcyclopropanes and amines using a domino ring‐opening/cyclization/aza‐addition sequence.

     

Synthesis and characterization of α‐butyl‐omega‐{3‐[2‐hydroxy‐3‐(N‐methyl‐N‐hydroxy‐ ethylamino)propoxy]propyl}polydimethylsiloxane

A novel synthesis path for the monotelechelic polydimethylsiloxane with a diol‐end group, α‐butyl‐omega‐{3‐[2‐hydroxy‐3‐(N‐methyl‐N‐hydroxyethylamino)propoxy]propyl}polydimethylsiloxane, is described in this article. The preparation included three steps, which were anionic ring‐opening polymerization, hydrosilylation, and epoxy addition. The structure and polydispersity index of the products were analyzed and confirmed by FTIR, ¹H NMR, ¹³C NMR, H? H, and C? H. Correlated Spectroscopy and gel permeation chromatography. The results demonstrated that each step was successfully carried out and the targeted products were accessed in all cases. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

A Simple Copper‐Catalyzed Cascade Synthesis of 2‐Amino‐1H‐indole‐3‐carboxylate Derivatives

We have developed a simple and efficient copper‐catalyzed method for the synthesis of 2‐amino‐1H‐indole‐3‐carboxylate derivatives via cascade reactions of substituted N‐(2‐halophenyl)‐2,2,2‐trifluoroacetamide with alkyl 2‐cyanoacetate or malononitrile under mild conditions, and the method is of wide practical application.     

The High‐Pressure Characterization of Energetic Materials: 2‐Methyl‐5‐Nitramino‐2H‐Tetrazole

The isothermal structural properties, equation of state, and vibrational dynamics of 2MNT were studied under high‐pressure using synchrotron XRD and optical Raman and IR microspectroscopy. Analysis of the XRD patterns revealed no indication of a phase transition to near 15 GPa and the pressure‐volume isotherm remained smooth to 15 GPa. Near 15 GPa, significant sample damage was observed from the X‐ray beam which precluded the acquisition of patterns above this pressure. XRD and Raman spectroscopic measurements showed the monoclinic ambient condition phase of 2MNT remains the dominant phase to near 20 GPa, although a shift of the NO₂ IR active vibrational modes to lower frequencies suggested a subtle geometry modification not reflected in the XRD data.