共查询到20条相似文献,搜索用时 93 毫秒
1.
2.
3.
偶氮苯及其衍生物的特点在于可逆顺反异构化。为合成各种光致变色的化合物 ,将环氧乙烷环并入到偶氮苯中 ,设计出易感光中间体。首先 ,制备出一系列的 4-烷基偶氮苯 -4’ -(羟基 -2 -羟丙基三甲基 )甲基硫酸铵 ,并在水溶液中进行研究。在UV光照射下 ,偶氮衍生物的表面活性有重大改变。在光稳定态 ,顺式异构体的量约为 92 %。 相似文献
4.
双(苯并恶唑)芪的光物理行为及其异构化反应的研究 总被引:1,自引:1,他引:0
研究了双(苯并恶唑)芪的光物理行为和光顺反异构化反应,对这类化合物的发光光谱不依赖于溶剂极性的原因进行了初步讨论。异构化反应中,发现乙二醇引入时会加速该化合物反-顺异构化和抑制顺-反过程的回复,其原因可能是与生成了顺式异构体两个苯式苯恶唑间的氢键有关。 相似文献
5.
正目前所用的农药产品中25%是手性化合物,而在20世纪90年代以前,这类手性化合物一直被当作单一化合物来应用的。这类手性化合物分子中由于具有限制旋转的因素,使得各个基团在空间排列方式不同而出现顺反异构体,这些顺反异构体的性质不完全相同。化合物分子中有双键(以C=C双键最为常见,此外还有C=N双键、N=N 相似文献
6.
研究了双(苯并唑)芪的光物理行为和光顺反异构化反应,对这类化合物的发光光谱不依赖于溶剂极性的原因进行了初步讨论.异构化反应中,发现乙二醇引入时会加速该化合物反-顺异构化和抑制顺-反过程的回复,其原因可能是与生成了顺式异构体两个苯基苯并唑间的氢键有关. 相似文献
7.
目的:建立了一种测定4-(4'-正丙基环己基)-环己基甲醛顺反异构体的反相HPLC-ELSD法。方法:采用Inter Sustain Swift C18(150×4.6 mm,5μm)色谱柱,以乙醇∶水(V/V=80∶20)为流动相,流速为1.0 mL/min,漂移管温度为35℃,雾化气压力350 kPa。结果:在选定的色谱条件下,4-(4'-正丙基环己基)-环己基甲醛顺式异构体和反式异构体可达到很好的分离,在0.1~0.5μg/mL线性范围内顺反异构的相对矫正因子为0.95,顺式异构体的平均回收率为100.3%,最低检出量为200 ng。结论:方法快速简便,重现性好,可用于控制反式4-(4'-正丙基环己基)-环己基甲醛中的顺式异构体。 相似文献
8.
9.
10.
《山东化工》2018,(19)
乙醛酸可与2,4-二硝基苯肼(DNPH)反应生成乙醛酸腙,该腙类物质对紫外-可见光有较强的特征吸收。本研究对乙醛酸采用高效液相色谱法(HPLC)测定,探究乙醛酸与DNPH反应,衍生成腙过程中的影响因素。实验发现,乙醛酸与DNPH衍生过程中会产生顺式和反式两种异构体。该顺反异构体的生成及生成条件从未被报道过。两种异构体的生成比例与衍生时间、衍生温度、pH值以及DNPH用量等因素有关。其中,衍生时间对乙醛酸腙顺反异构体生成比例的影响最为显著。长时间衍生有利于反式异构体向顺式异构体的转化。同时还发现,当乙醛酸的衍生条件:温度为40℃,pH值为3,DNPH与醛基的物质的量比为30,反应时间60min时,可完全满足乙醛酸的定量要求。但是使用乙醛酸腙顺式或反式单一异构体面积积分值(365nm)与乙醛酸质量浓度做标准曲线不能实现对乙醛酸的准确定量。使用两种异构体色谱峰面积的算术加和与乙醛酸质量浓度作标准曲线定量,则可实现乙醛酸的外标法准确定量。在上述衍生体系下,乙醛酸质量浓度在7~140 mg/kg范围内,乙醛酸腙的峰面积与乙醛酸的质量浓度之间呈良好的线性关系,线形相关系数为0.9999。七次重复测定相对标准偏差为1.06%,结果重复性好。加标回收率在98.9%~102.3%之间。 相似文献
11.
乙烯酮(双乙烯酮)是十分重要的化工中间体,其下游产品较多。江苏某化工厂开发生产乙烯酮(双乙烯酮)下游产品三十多个,年生产规模三万多吨,是国内以乙烯酮(双乙烯酮)为中间体生产精细化学品的综合骨干企业。针对乙烯酮(双乙烯酮)下游产品废水特点,该厂结合企业实际,开展了产品优化,结构调整,清洁生产,资源循环利用,节水降耗等工作,从源头削减了污染物的生产。同时投资二千多万元新建预处理装置三套,6000m3/d废水生化处理装置一套,使全厂乙烯酮(双乙烯酮)下游产品的废水得到了有效的治理。 相似文献
12.
13.
14.
D. G. Gordeev L. F. Gudarenko M. V. Zhernokletov V. G. Kudel’kin M. A. Mochalov 《Combustion, Explosion, and Shock Waves》2008,44(2):177-189
A semi-empirical equation of state for metals is described. Its capabilities are demonstrated by the example of the equation
of state for aluminum. New experimental data are presented on the location of the isentrope of aluminum for unloading from
the state at p = 229.71 GPa on the shock adiabat to an aerogel (SiO2) of density 0.08 g/cm3.
__________
Translated from Fizika Goreniya i Vzryva, Vol. 44, No. 2, pp. 61–75, March–April, 2008. 相似文献
15.
The objective of the study was to explore the effect of the degree of deacetylation (DD) of the chitosan used on the degradation rate and rate constant during ultrasonic degradation. Chitin was extracted from red shrimp process waste. Four different DD chitosans were prepared from chitin by alkali deacetylation. Those chitosans were degraded by ultrasonic radiation to different molecular weights. Changes of the molecular weight were determined by light scattering, and data of molecular weight changes were used to calculate the degradation rate and rate constant. The results were as follows: The molecular weight of chitosans decreased with an increasing ultrasonication time. The curves of the molecular weight versus the ultrasonication time were broken at 1‐h treatment. The degradation rate and rate constant of sonolysis decreased with an increasing ultrasonication time. This may be because the chances of being attacked by the cavitation energy increased with an increasing molecular weight species and may be because smaller molecular weight species have shorter relaxation times and, thus, can alleviate the sonication stress easier. However, the degradation rate and rate constant of sonolysis increased with an increasing DD of the chitosan used. This may be because the flexibilitier molecules of higher DD chitosans are more susceptible to the shear force of elongation flow generated by the cavitation field or due to the bond energy difference of acetamido and β‐1,4‐glucoside linkage or hydrogen bonds. Breakage of the β‐1,4‐glucoside linkage will result in lower molecular weight and an increasing reaction rate and rate constant. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3526–3531, 2003 相似文献
16.
17.
Jorge Marcelo Romero Soledad Bustillo Hugo Enrique Ramirez Maisuls Nelly Lidia Jorge Manuel Eduardo Gómez Vara Eduardo Alberto Castro Alicia H. Jubert 《International journal of molecular sciences》2007,8(7):688-694
A thermochemical rather simple experimental technique is applied to determine the enthalpy of formation of Diperoxide of ciclohexanone. The study is complemented with suitable theoretical calculations at the semiempirical and ab initio levels. A particular satisfactory agreement between both ways is found for the ab initio calculation at the 6–311G basis This set level. Some possible extensions of the present procedure are pointed out. 相似文献
18.
19.
20.
塔设备改造选型的分析 总被引:2,自引:0,他引:2
就当前扩产增容中塔设备设计和改造时板式塔和填料塔的选型问题加以分析。在评述目前国内常用的几种塔板和新型填料之后,着重介绍一种新型塔板(导向梯形浮阀塔板)和一种新型填料(波环填料——乾隆帕克)。 相似文献