共查询到20条相似文献,搜索用时 93 毫秒
1.
2.
3.
4.
5.
6.
以主链降解型丙烯酸锌树脂为主体树脂,选择吡啶硫酮锌( ZPT)和溴代吡咯腈( Econea)为复配防污剂,硫酸钡和石英砂为填料,制备了一种新型无铜自抛光防污涂料。运用正交试验设计方法,研究了涂料配方中颜料体积溶度(PVC)、填料含量、主防污剂用量和 m(ZPT)∶m(Econea)对自制涂层的防污性能、人工海水 /去离子水浸泡后附着力、硬度和耐冲击性的影响。通过综合加权评分法计算得到的最优值分别为 41%、5%、40%和 1∶1. 5。优化获得的无铜防污涂料力学性能良好,经过 6个月浅海挂板试验(防污涂层 70 μm)初步验证,防污涂料具有良好的防污效果。 相似文献
7.
8.
长效无毒海洋防污涂料的研究进展 总被引:1,自引:0,他引:1
《上海涂料》2015,(11)
重点介绍了低表面能防污涂料、仿生防污涂料以及含两性离子聚合物的防污涂料的研究进展;对这三种环境友好型海洋防污涂料的防污机理与存在的缺陷进行分析;对环境友好型海洋防污涂料的发展前景作了展望。 相似文献
9.
10.
11.
12.
13.
用酶防污,消除毒素对环境的危害,这是环境友好型防污涂料的重要发展方向之一。阐述了酶防污涂料的发展历程、防污机理以及就"留住"防污涂料中的酶及其发展前景作了粗浅的探索。 相似文献
14.
由于中国的许多船厂位于淡水流域,淡水浸泡对防污涂料的影响正引起人们越来越多的关注。本研究中,选取了4种基于丙烯酸硅烷技术和6种基于离子交换技术的防污涂料,比较了在海水和淡水里的吸水性能。为了便于确定成膜树脂与相应涂料吸水性能之间的相关性,将成膜树脂从涂料中分离出来进行研究。 相似文献
15.
采用气流磨处理工业级 Cu2O,可有效减小颗粒粒径和分布范围,得到平均粒径约为 0.98 μm的微纳米 Cu2O;通过抑菌、抑藻、铜离子渗出速率、浅海浸泡等试验探讨了微纳米Cu2O防污性能。结果表明:相对于工业级 Cu2O,微纳米 Cu2O的 24 h抑菌、抑藻率可分别提升约 28.82%和 21.82%,使防污涂料具有更优异的实海综合应用性能和防污性能;相对于纳米级 Cu2O,基于微纳米 Cu2O的防污涂层具有更稳定、可控的铜离子渗出性能,避免了因纳米 Cu2O引起的前期铜离子“暴释”而导致的资源浪费,以及后期铜离子渗出率不足而导致的防污效果欠佳等缺陷。 相似文献
16.
17.
18.
介绍了符合环保要求的绿色功能涂料,结合功能涂料的发展趋势,阐述了抗菌、防火、防污等新型绿色环保功能涂料的现状,并展望了未来新型环保功能涂料的发展前景。 相似文献
19.
Marine biofouling had been a headache when engaging in marine activities. The most effective and convenient method for dealing with this problem was to apply antifouling coatings. But now a single anti-fouling system was hard to satisfy the requirement of anti-fouling simultaneously. Therefore, it was particularly important to develop novel multi-system anti-fouling technology. In the work, a novel polymer coatings with polydimethylsiloxane (PDMS) segments in the main chain and hydrolysable side chain was designed and synthesized which showed low surface energy and self-polishing performance, and then we creatively covalently immobilized the polyurethane on the surface of multi-carbon nanotubes (MWNTs) to form multisystem antifouling coating. The results showed that the polymer coating would produce hydrolysable regions in the hydrophobic PDMS segment to endure the polymer coating hydrophobic and hydrolysis properties when contacted with water. In addition, the self-polishing rate and the surface energy could be regulated by varying its copolymerization, and the addition of MWNTs could kill the microorganisms and endowed the polymer coating itself enhanced antibacterial effect. Furthermore, considering the high specific surface area and physicochemical characteristics of MWNTs, it could be combined with antifoulant Cu2O through a polar or non-polar combination as a carrier to control the release rate of Cu2O in coatings. 相似文献
20.
建筑反射隔热保温涂料的研制 总被引:1,自引:1,他引:1
介绍了以有机硅改性丙烯酸乳液为基料,不透明聚合物、空心微珠和红外辐射功能颜填料制备建筑反射隔热保温涂料的工艺技术,研究了几种功能颜填料及涂料体系的PVC值对涂料隔热保温性能的影响,乳液T_g值及阻燃剂对涂料耐沾污性和阻燃性能的影响。 相似文献