The use of carbon nanotubes in textile printing

The characteristic properties of carbon nanotubes (CNTs), particularly their heat conduction, electrical conductivity, high modulus of elasticity, high strength, and resistance to chemicals, have resulted in widespread application of CNTs in nanotechnologies. In this study, CNTs were used to impart specific functionality to textiles by printing techniques. To this aim, modified commercial aqueous dispersions of multiwalled CNTs from Nanocyl^® were used for preparing special compositions as paste for printing by conventional techniques (screen printing) and as inks for ink‐jet printing to bestow the fabric antistatic and antibacterial properties. Taking into account the importance of the dispersion level of CNT in the printing composition from the point of view of antistatic properties, the quality of the CNT dispersion was assessed on the basis of particle size distribution by means of a DLS PSS Nicomp device. Printings were done on two types of woven fabrics: 100% cotton and 30/70% cotton/polyester blend. The CNTs used in printing were found to impart antistatic and antibacterial properties to the printed fabrics. These imparted properties were resistant to repeated washing. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Pretreatment effects on pigment‐based textile inkjet printing – colour gamut and crockfastness properties

The application of two commercial pretreatment agents, formulated to improve the performance of a six‐colour nano‐scale pigment ink set during the textile inkjet printing of cotton and polyester (PET) fabrics, was examined. An industrial scale printer, operating at 55 linear m/h and equipped with Kyocera printheads, was used to print on commercial fabrics (180 cm wide) prepared for digital printing. The work employed an industrial scale rather than a benchtop printer to enhance the utility of the results for a commercial environment. The colorimetric attributes of printed fabrics were recorded for the individual inks as well as for spot colour combinations generated using Dr. Wirth RIPMaster v11 software. Colour table profiles were also generated and the colorimetric values of inks were compared. Colour gamuts of inks on cotton and PET, including three‐dimensional volumes in the CIELab space, were examined to assess the role of pretreatment on the colorimetric properties of the printed substrates. It was found that the pretreatments enhanced the ink receptiveness, colour intensity and colour gamut of fabrics. Pretreatment of cotton resulted in a larger gamut and more vivid colours than on PET. However, wet and dry crockfastness results were found to be low. In this regard, Time‐of‐Flight Secondary Ion Mass Spectrometry analysis of fabrics printed in the presence and absence of pretreatment indicated that the low crockfastness arises from higher pigment levels on the surface of the pretreated fabric.     

Single‐phase ink‐jet printing onto cotton fabric

The current commercial application of ink‐jet reactive inks to cotton fabrics requires pretreating with pad liquor containing a thickener, urea and alkali prior to printing. In this study, attempts have been made to develop a reactive ink‐jet print in a single‐phase process by adding an organic salt to the ink formulation and hence removing the need to pretreat fabrics. This approach utilises inks containing both a reactive dye, in this case Procion Red H‐E3B, and an organic salt such as sodium formate, sodium acetate, sodium propionate or tri‐sodium citrate. The behaviour of a novel reactive ink formulation for ink‐jet printing on to cotton fabric was evaluated at different pH vlaues. The results at optimum pH indicated that printed non‐pretreated fabrics with ink containing organic salts exhibited a higher level of reactive dye fixation than printed pretreated fabric containing no organic salt ink. The yielded prints demonstrate excellent colour fastness to washing and dry/wet crocking properties. The light fastness of the printed fabrics was improved by adding an organic salt to the ink formulation.     

Photochromic ink formulation for digital inkjet printing and colour measurement of printed polyester fabrics

The application of a series of commercial photochromic dyes to polyester fabric by a digital inkjet printing method was investigated. Solvent‐based ink systems using the dyes were formulated. The inks were characterised in terms of their physical properties which are related to the jettability of the inks, and finally the prints were fixed onto polyester fabrics by thermal fixation. Colour measurement of the printed fabrics was used to measure their degree of photocoloration, fading rate, fatigue resistance, and storage stabilities. The measured properties of the inkjet‐printed fabrics were compared with the same properties of the same dyes applied to polyester fabrics by dyeing methods. The printed fabrics demonstrated inferior performance in terms of the degree of photocoloration, superior performance in the case of background colours, a higher rate of fading, and a lower fatigue resistance compared with that shown by the same dyes applied to polyester fabric by dyeing methods.     

Ink‐jet printing of cotton with natural dyes

Four natural dyes, annatto, cutch, pomegranate fruit rind, and golden dock, were used as colorants for the preparation of water‐based ink‐jet inks for digital textile printing. The physical and rheological properties (pH, conductivity, surface tension, and viscosity) of the inks were measured over a period of 90 days for the evaluation of ink stability and suitability for ink‐jet printing. The inks were found to be suitable and were used for the digital printing of cotton fabrics. The prints were subjected to wash, light, and rub fastness tests and colour measurements. Colour consistency and fastness results, especially after fixation, are comparable with those of synthetic dyes, which paves the way for the production of environmentally friendly ink‐jet inks using natural dyes for the digital printing of cotton through the formulation of suitable printing techniques.     

Disperse ink‐jet inks: properties and application to polyester fibre

Water‐based ink‐jet inks were prepared using press cake samples of two commercially available azo disperse dyes. The suitability of the inks for printing polyester fabric was evaluated via measurement of surface tension, conductivity, viscosity, pH and particle size distribution. Inks prepared by the proposed method fulfill most requirements for an ink‐jet ink depending on the colorant structure, the dispersing agent and the alcohol used. The inks were applied to polyester fabric by both printing and dyeing and the fastness of the ensuing coloured samples was assessed. The fastness properties of the dyed and printed polyester samples were found to be very good to excellent and generally meet accepted customer requirements. Oil‐in‐water microemulsions containing the same colorants were also prepared. Their properties, which are crucial to the suitability for ink‐jet ink, were compared with those of the conventionally prepared inks and were found to be improved, with the exception of conductivity, while surface tension remained within acceptable values.     

Ink‐jet printing process for lyocell and cotton fibres. Part 2: The relationship of colour strength and dye fixation to ink penetration

The colour appearance on ink‐jet printed textiles is influenced by a range of factors, including the chemical and physical nature of the fibre, dye–fibre affinity, pretreatment and fabric structure. Regression analyses were conducted to study the correlation between colour strength, fixation and ink penetration obtained by ink‐jet printing lyocell fibres (standard Tencel and Tencel A100) and cotton with an ink based on a monofunctional reactive red dye. The fixation was highest on Tencel A100, followed by standard Tencel and then cotton, while colour strength was highest on standard Tencel followed by cotton and Tencel A100. A linear relationship between colour strength and ink penetration was found with cotton, indicating greater dependence of depth of shade on ink penetration than on standard Tencel and Tencel A100 fabrics, where the interrelationships were more complex, but of low statistical significance. A schematic representation is proposed illustrating the mechanism of ink penetration into pretreated fibres, which provides a reasonable interpretation of the events occurring as dye penetrates into and fixes onto the fibres.     

Flame resistant cotton fabrics prepared by radiation-initiated polymerization with vinyl phosphonate oligomer and N-methylolacrylamide

Radiation-initiated polymerization of vinyl phosphonate oligomer (molecular weight 500–1000) and N-methylolacrylamide from aqueous solutions was investigated with cotton printcloth, flanelette, and sateen fabrics and with cotton (50%)–polyester (50%) flannelette fabrics. Determinations were made of the effects of radiation dosage, mole ratio of vinyl phosphonate in the oligomer to N-methylolacrylamide in aqueous solution, concentration of reactants, wet pickup of solutions on fabrics, and irradiation of both dry and wet fabrics on efficiency of conversion of oligomer and monomer in solution to polymer add-on. The effects of vinyl phosphonate oligomer and N-methylolacrylamide radiation-initiated polymerization on some of the textile properties of cotton printcloth and on flame resistances of cotton and cotton–polyester fabrics were evaluated. The breaking strength of modified cotton printcloth was about the same as that of unmodified fabric; however, the tearing strength and flex abrasion resistance of modified fabric were reduced. The textile hand of the modified printcloth fabrics that had flame resistance indicated: interaction between cellulose and vinyl phosphonate oligomer–poly(N-methylolacrylamide) and uniform deposition in the fibrous cross section (transmission electron microscopy); surface areas of heavy deposits of oligomer–polymer (scanning electron microscopy); and phosphorus located throughout the fibrous cross section (energy dispersive x-ray analysis). Polymerization of vinyl phosphonate oligomer and N-methylolacrylamide was radiation initiated with cotton–polyester fabric; however, this modified fabric did not have flame-resistant properties.     

Properties of ink‐jet printed,ultraviolet‐cured pigment prints in comparison with screen‐printed,thermo‐cured pigment prints

A collection of printed fabrics for men’s shirts was designed and prepared using computer‐aided design/computer‐aided manufacturing technology. The colours for designs were ink‐jet printed on cotton fabrics with pigments and ultraviolet‐cured. These prints represented the target colours for subsequent flat‐screen printing, which was performed using pigment printing pastes and thermal curing. For an exact transfer of colours of the ink‐jet‐printed standard into the screen‐printing process, a computer recipe prediction method was used. A comparison of colorimetric parameters of fabrics printed with both printing techniques shows minimal and acceptable differences in the CIELab colour values. A comparison of colour fastness properties proves that very good colour fastness is achieved on the pigment‐printed fabrics produced with both printing techniques. The flat‐screen‐printed fabrics show better colour fastness to washing, perspiration and rubbing, while ink‐jet‐printed fabrics show better colour fastness to dry‐cleaning and light. The fabrics printed with both printing techniques have high rigidity and non‐elastic properties. The mechanical and physical parameters are strongly dependent upon the amount of the dry substance of the printing media applied on the cotton fabric surface, which is higher on screen‐printed fabrics. The ink‐jet‐printed fabrics show better air permeability than flat‐screen‐printed fabrics.     

Surface treatment of cotton fabrics with chitosan

Antibacterial activities of cotton and polyester/cotton fabrics treated with chitosan or chitosan/DMDHEU have been investigated. The washing durability properties of the aforementioned fabrics were also studied. Another group of fabric samples produced from mature and immature cotton fibres were dyed with reactive dyes and the colour yields and colour differences of the dyed fabrics assessed. The surfaces of the treated and untreated cotton fabrics were observed by scanning electron microscopy to compare the morphology.     

丽赛织物洗涤性能研究

测试了纯棉织物以及棉／丽赛、棉／涤纶和棉／粘交织物洗涤一定次数后拉伸性能和悬垂性能的变化，试验结果表明，经过10次洗涤后棉／丽赛交织物的耐洗涤性能较纯棉织物好，比棉／粘交织物有明显提高。     

Synthesis,characterization, and application of hetarylazo disperse colorants: Preparation and properties of ink-jet inks with active agents for polyester printing

The synthesis and characterization of two hetarylazo disperse colorants are described. These compounds were used for the preparation of ink-jet inks with and without active agents for polyester printing. The viscosity, conductivity, surface tension, and pH of these inks were studied over a period of time and discussed with respect to their structure and the active agent content. The particle size and particle size distribution of a representative ink containing a new synthesized hetarylazo compound were measured. All the prepared inks were proved to be suitable for ink-jet printing in terms of their particle size. Viscosity , surface tension, conductivity, and pH values of all inks, with and without active agent, were monitored over a period of 90 days and were related to the ink stability. The same properties were measured for an ink preparation with a commercial dye for comparison. The inks containing the new synthesized dyes were found to be more advantageous regarding most of the above properties, i.e., surface tension, viscosity, and conductivity. Contrarily pH values of all the preparations were unacceptable for ink-jet inks. The ink compositions containing the new synthesized compounds were applied by exhaustion (dyed) on polyester fabric. Fastness properties of the dyed polyester samples were excellent to very good in most cases. Color measurements of the dyed fabric were also performed. A qualitative determination of the aroma-active agent adsorbed on the fiber by the exhaustion method was achieved by the GC-MS method. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

The study of colour fastness of commercial microencapsulated photoresponsive dye applied on cotton,cotton/polyester and polyester fabric using a pad‐dry‐cure process

Commercial microencapsulated photoresponsive dye was applied on cotton, polyester/cotton and polyester fabric using a pad‐dry‐cure process. Colour fastness of the photoresponsive fabrics to washing, wet cleaning, dry cleaning, rubbing and light was investigated. The CIELAB colour values of the fabrics before and after testing were measured using a reflectance spectrophotometer, and the colour differences were calculated to evaluate the fastness properties. The fabrics had better colour fastness to wet cleaning and washing than to dry cleaning. The fabrics showed higher colour fastness to wet than to dry rubbing. The photoresponsiveness of the fabrics decreased with prolonged exposure time to artificial light due to low photostability of the microcapsules.     

Pretreatment of silk fabric surface with amino compounds for ink jet printing

This research studied pretreatments of silk fabric with amino compounds for ink jet printing. The pre-treating solutions were serine, glycine, aspartic acid, sericin, chitosan, and a commercial pre-treating chemical called Sanfix 555. Both untreated and treated fabrics were printed with in-house formulated pigmented inks and later steamed to fix the ink on the fabric surface. The pretreatments containing the amino compounds improved hydrophilicity of the silk fabric with the exception of chitosan. The color gamut from sericin, chitosan, and Sanfix 555 pretreatments was wider than that from the amino acid pretreatments. The chroma of the cyan color was most improved. The fabric, after pretreatment with sericin, showed a significant improvement in dry crock fastness while wet crock fastness was improved by serine and glycine. The chitosan slightly improved both dry and wet crock fastness. Wash fastness of all pretreated and printed fabrics including untreated and the printed fabrics was excellent because the pigmented ink was formulated with pigment and binder. Bending stiffness of the silk fabrics after chitosan pretreatment was significantly higher than those with other pretreatments. The ink penetration in sericin and chitosan padded layers was shallower than those for amino acids, enhancing ink deposition on the fabric surface. The amino compound pretreatments held and fixed additional ink on the fabric surfaces resulting in a wider color gamut of the inks.     

纳米氧化锌和纳米银对棉织物的多功能整理

以植物金银花提取物作为还原剂制备了纳米ZnO和纳米Ag,通过浸轧法将纳米ZnO单独整理以及将两者依次整理到棉织物上制备多功能棉织物(ZnO-棉织物、ZnO/Ag-棉织物).利用SEM、XRD、FTIR分析了整理前后棉织物的形貌和结构,并探讨了整理后棉织物的多功能性.结果表明,棉织物上的纳米粒子分布较均匀且发生了轻微团聚.与ZnO-棉织物相比,ZnO/Ag-棉织物对亚甲基蓝(MB)和红酒的降解率分别提高了7.09％和10.61％,说明纳米Ag提升了纳米ZnO的光催化活性.ZnO-棉织物经过10次洗涤后其纳米粒子含量虽有小幅下降,但对MB的降解率仍达到83.24％以上,说明负载纳米粒子后棉织物具有良好的自清洁能力和耐洗性能.此外,ZnO-棉织物和ZnO/Ag-棉织物的紫外防护系数(UPF)值分别达到33.23和41.06,对大肠杆菌和金黄色葡萄球菌的抑菌率均达到95％以上,表现出优良的抗紫外线性和抗菌性能.     

Digital and conventional printing and dyeing with the natural dye annatto: optimisation and standardisation processes to meet future demands

The plant colorant annatto was investigated to determine its potential use as a natural dye for conventional and novel textile applications. Alum was selected as a mordant. Different techniques of mordanting and a broad set of variations in the dyeing recipes were applied to achieve optimisation and an improvement in colour fastness properties. Quality control of all dyeings was performed using standard fastness tests and colour measurements. Printing of cotton fabrics was also achieved with annatto using the flatbed screen‐printing technique. Measurement of the rheological and physical properties of the annatto printing paste confirmed its stability and suitability for conventional printing. Fastness properties of the conventionally printed annatto fabric were also measured. A novel water‐based digital printing ink using annatto was prepared and applied to cotton fabric using a digital printing application. The physical properties of the annatto ink‐jet ink were also measured. Wash, light and rub fastness properties of the annatto digitally printed fabric were determined and compared with those of conventional printing methods. The results were promising for annatto as a natural colorant, which possibly paves the way for the development of a new range of natural environmentally friendly dyes.     

Structural,electrical, and electromagnetic properties of cotton fabrics coated with polyaniline and polypyrrole

In this study, the structural, electrical, and electromagnetic properties of cotton fabrics coated with polyaniline (PAni) and polypyrrole (PPy) were investigated and compared. For the aims, anilin and pyrrole were used as monomers, and in situ polymerization on cotton fabric by chemical oxidative polymerization was performed. After production, the structural properties of the fabrics were determined with Fourier transform infrared spectroscopy and X‐ray diffraction. In addition, ultraviolet (UV) permeability, tensile strength, colorfastness, and electrical and electromagnetic measurements of the fabric samples were carried out. The resistance values of the cotton fabrics coated with PAni and PPy were found to be 350 and 512 Ω, respectively. The average electromagnetic shielding efficiency and average absorption values of the cotton fabrics coated with PAni were determined to be 3.8 dB and 48%, respectively, and these values for the cotton fabrics coated with PPy were 6 dB and 50%, respectively. Consequently, a significant difference was not observed between the resistance values and electromagnetic parameters of the fabrics coated with PAni and PPy, although the intact textile characteristics of the fabric coated with PPy were protected and improved, whereas the characteristics of the fabric coated with PAni were inferior. Moreover, we first report that the fabrics coated with conductive polymers had excellent UV‐protection properties. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

高分子电磁屏蔽织物的研制

采用自制导电涤纶织物和棉织物,通过在交联剂中均匀分散导电粉末制得屏蔽涂料,采用涂敷方法得到电磁波屏蔽织物。讨论了导电粒子种类与质量分数对涂层表面比电阻、涂层的屏蔽性能等的影响。结果表明:采用三明治型涂敷方式,每层涂层中导电粉末的质量分数分别为银粉70%、石墨60%,涂层的总厚度40～60μm,所得屏蔽织物的屏蔽效能最优,在30～1500MHz内平均达30dB,织物的手感保持良好,有工业化前景。     

Effect of cotton fabric pretreatment on drop spreading and colour performance of reactive dye inks

Ink dot distribution on cotton fabrics determines the colour performance of reactive dye inkjet printing, and ink drop spreading is one of the important factors influencing the ink dot distribution. In order to reveal the relationship between fabric pretreatment and ink drop spreading, two pieces of cotton fabric were pretreated respectively with sodium alginate and sodium alginate plus high fatty acid derivative solutions. Results indicate that the surface energy of the cotton fabrics was reduced from 73.79 to 69.45 and 58.49 mJ m^?2 after the pretreatment with sodium alginate and sodium alginate plus high fatty acid derivative respectively. Correspondingly, the spreading area of cyan ink drops on these fabrics was reduced from 104.9 to 92.5 and 72.3 mm². Furthermore, on the fabric treated with sodium alginate plus high fatty acid derivative, the strip‐like ink dots were narrow and short, which means the dye was concentrated in an area on the fabric surface. Colorimetric values of the inkjet‐printed fabrics demonstrated that the high fatty acid derivative would enhance the ability of sodium alginate to control ink droplet spreading, thereby improving the colour performance.     

The colour properties of polyester/cotton knitted fabrics coated with poly(N‐vinyl‐2‐pyrrolidone)

The objective of this research was to investigate the use of crosslinked poly(N‐vinyl‐2‐pyrrolidone) (PVP) to coat polyester/cotton knitted fabric, without adversely affecting its dyeing properties. Before dyeing, the knitted fabrics were tested for bursting strength to assess the influence of the coating on their resistance. The dyeing parameters were evaluated as the exhaustion (%), K/S value, colour difference (ΔE), relative strength (RS %) and colour fastness to washing. Bursting strengths were 9.4 for coated and 9.7 kgf cm^?2 for uncoated knitted fabric samples, confirming an insignificant loss in resistance. In the evaluation of K/S, ΔE and RS%, the values for the samples with the highest concentration of PVP were the most different to those for the standard sample. The colour fastness showed satisfactory results indicating that neutralisation and washing after dyeing were effective. These results could lead to increased quality in the textile industry, adding value to products.