共查询到20条相似文献,搜索用时 375 毫秒
1.
2.
3.
4.
5.
新型生物农药——丁烯基多杀菌素 总被引:1,自引:1,他引:0
丁烯基多杀菌素是由须糖多孢菌(Saccharolyspora pogona)产生的一类大环内酯类抗生素,对多杀菌素难于控制的世界性检疫性害虫苹果蠹蛾和重要农业害虫烟青虫具有良好的生物防治作用.丁烯基多杀菌素与多杀菌素生物合成的主要区别在于busA比spnA多5244 bp,该序列编码5个功能结构域,负责在C21上合成丁烯基替代多杀菌素相应位置上的乙基.综述了丁烯基多杀菌素的结构和理化性质、产生菌的生物学特性、生物合成过程及相关基因和酶、杀虫谱、提取等有关研究进展. 相似文献
6.
7.
丁烯基多杀菌素(butenyl-spinosyn)是一种由须糖多孢菌(Saccharopolyspora pogona)产生的杀虫剂,兼具生物农药的安全性和化学农药的速效性。当前,野生型须糖多孢菌合成丁烯基多杀菌素效率低,达不到工业生产要求,获得高产菌株是亟待解决的问题。目前关于丁烯基多杀菌素的相关研究较少,由刺糖多孢菌(Saccharopolyspora spinosa)产生的多杀菌素是丁烯基多杀菌素的结构类似物,具有相似的生物合成途径,本文介绍了两者的基本特性,借鉴多杀菌素的研究经验总结了丁烯基多杀菌素高产菌株已有及可用的选育和改造策略,包括传统的理化诱变方法以及代谢流调控、途径基因调控、转录调控、异源表达等更加精准的基因工程方法,以期为后续丁烯基多杀菌素的深入研究提供思路。 相似文献
8.
9.
采用分子蒸馏技术从异氰酸酯热解液中分离多亚甲基多苯基多异氰酸酯(PMPPI),通过设计L25(56)正交实验对PMPPI-氯苯的模拟热解液进行分离,得到最佳工艺条件为:进料速度2 mL/min、蒸馏温度100℃、转子速度120 r/min、蒸馏压强4.0 kPa,该条件下PMPPI的分离纯度高达99.65%. 使用上述最佳分离条件对多亚甲基多氨基甲酸甲酯(PMDC)热解分离PMPPI的真实热解液进行分离,分离高效液相色谱检测不到氯苯,证明分子蒸馏可从异氰酸酯热解液中高效分离PMPPI. 相似文献
10.
采用氨基多羧酸配合物法合成La2NiO4+δ粉体,利用XRD、TG-DTA、IR、FESEM等测试方法对合成产物进行表征,并探讨氨基多羧酸配合物前驱体的热分解行为。研究结果表明,氨基多羧酸配合物前驱体为非晶态结构,前驱体中DTPA与金属阳离子形成双齿配位结构。配合物前驱体热分解后先形成中间产物(LaO)2CO3和NiO,进一步加热中间产物(LaO)2CO3即分解为La2O3。当热处理温度达到700℃时,合成产物中形成了K2NiF4结构的La2NiO4+δ,但同时还存在少量杂相;经900℃热处理后合成产物形成单一K2NiF4相的La2NiO4+δ,合成粉料的颗粒细小、均匀(~100nm)。 相似文献
11.
通过半连续实验考察了对二甲苯(PX)二次氧化过程中的液相氧化,并对该过程进行了模拟计算。设计和进行了包含PX液相氧化、中断反应以及降温二次液相氧化三个阶段的实验;通过动力学实验测定和数据回归确定了基于芳烃氧化自由基链式反应机理的PX液相氧化动力学模型的参数;采用建立的PX液相氧化机理模型对PX分段氧化过程进行了预测。结果表明,对中断反应后的降温二次液相氧化间歇过程,采用第一阶段末期自由基浓度做初值时模型预测值与实验值符合良好;而假设自由基初值浓度为零时,PX液相氧化动力学模型对二次氧化的液相反应预测效果较差,其原因可能是中断降温后的氧化母液中存在过氧基团会使二次液相氧化反应极快地被再引发启动。 相似文献
12.
Reactant (CO and H 2 ) concentration and conversion profiles were determined as a function of axial distance for the Fischer-Tropsch reaction in a slurry bubble column reactor. Model equations were developed from the basic concepts, i.e., conservation of mass and momentum, and combined with iron catalyst reaction kinetics as well as mass transfer coefficients, gas, liquid, and solid phase holdup, Henry's Law constants, minimum fluidization velocity, and terminal velocity obtained from empirical correlations. Concentration profiles and conversion were determined for varying key process variables: liquid-phase velocity and rate constant. Results suggest that the reaction is kinetically limited and that conversion is proportional to liquid velocity. Thus, process improvements can be achieved by either maximizing liquid-phase velocity or increasing the rate constant by modifying the catalyst. 相似文献
13.
Reactant (CO and H 2 ) concentration and conversion profiles were determined as a function of axial distance for the Fischer-Tropsch reaction in a slurry bubble column reactor. Model equations were developed from the basic concepts, i.e., conservation of mass and momentum, and combined with iron catalyst reaction kinetics as well as mass transfer coefficients, gas, liquid, and solid phase holdup, Henry's Law constants, minimum fluidization velocity, and terminal velocity obtained from empirical correlations. Concentration profiles and conversion were determined for varying key process variables: liquid-phase velocity and rate constant. Results suggest that the reaction is kinetically limited and that conversion is proportional to liquid velocity. Thus, process improvements can be achieved by either maximizing liquid-phase velocity or increasing the rate constant by modifying the catalyst. 相似文献
14.
β-环糊精在液相合成反应中的应用 总被引:2,自引:2,他引:0
综述了β-环糊精应用于液相反应研究的最新进展,对β-环糊精作为催化剂或反应载体进行开环、氧化、脱保护等反应进行分类阐述,包括对β-环糊精的反应底物选择性能和催化性能进行分析,认为β-环糊精与底物的相互作用可有效地催化液相有机化学反应,提高反应选择性。提出β-环糊精尤其是β-环糊精衍生物在有机合成反应中将具有广阔的发展前景。 相似文献
15.
16.
在中空纤维膜系统中用纯水及不同浓度的氢氧化钠溶液和二氧化碳混合气进行反应分离,研究了膜分离与化学反应耦合过程的特性。在低二氧化碳进口摩尔分率、低气速及较高氢氧化钠浓度时,化学反应对分离的增强因子非常大.在反应-膜分离耦合体系中,过程阻力与中空纤维膜自身的阻力及溶液中的反应速率有很大关系.由于增加了中空纤维膜阻力,使得二氧化碳的吸收率比较小,但是增加中空纤维数目可以使膜分离器具有巨大的传质表面积,从而有效地弥补了传质速率的不足.因此,适当地选择吸收剂浓度和混合气体流量,可以使反应一膜分离耦合过程达到较高的分离效果,与传统的填料吸收过程相比,在结构、操作和性能上都显示出优越性。 相似文献
17.
18.
甲烷液相转化具有反应条件温和、能耗低、投资少等优点,研究甲烷液相部分氧化制甲醇对实现天然气的直接转化和利用具有极为重要的战略意义。本文介绍了甲烷液相部分氧化制甲醇反应中有关反应溶剂介质的研究进展,详细叙述了各种酸性介质、水以及乙腈溶剂在甲烷部分氧化制甲醇中的应用,总结了不同溶剂介质下的反应机理、催化剂、溶剂浓度等对甲烷转化的影响,探讨了溶剂在甲烷液相部分氧化中的作用,指出依据溶剂介质的性质和作用,开发环境友好、反应条件温和、转化效率高的优良新型溶剂是甲烷液相部分氧化制甲醇的重要研究方向。 相似文献
19.
A reactive distillation process is being suggested for the production of the commercially interesting intermediate cyclohexanol from cyclohexene and water, which avoids some of the drawbacks of the conventional liquid-phase cyclohexane oxidation process, especially with respect to operational safety. This reactive distillation process has its own intricate challenges due to the fact that reaction, distillative separation and liquid-phase splitting occur simultaneously. The interaction of these three phenomena is studied using residue curve maps for both, model simulations and experimental data. Based on the fixed point analysis of the residue curves, a novel process is proposed for the reactive separation of cyclohexene/cyclohexane mixtures which is difficult to be carried out by conventional distillation due to very close boiling temperatures. 相似文献