Use of CaCl2 modified bentonite for removal of Congo red dye from aqueous solutions

CaCl₂ modified bentonite (BCa²⁺), a clean and cost-effective adsorbent with a basal spacing of 15.43 Å, was prepared for the removal of Congo red dye from water. It was effective for the removal of Congo red with a high adsorption capacity, and the adsorption was favored over a broad pH range (5-10). The pseudo-second-order kinetic model provided the best correlation of the experimental data. Adsorption isotherms indicated that sorption took place at specific homogeneous sites within the adsorbent. Furthermore, BCa²⁺ showed higher sorption capacity compared with other common materials used as adsorbents for Congo red dye. The results showed that BCa²⁺ could be employed as a low-cost material for the removal of Congo red from aqueous solutions.     

Adsorption of Rhodamine B Dye on Elaeis guineensis Frond Fiber

Adsorption of Rhodamine B (RB) dye was investigated using raw Elaeis guineensis frond fiber (EGFF). Experiments were performed using face centered composite statistical design with six input parameters namely pH (2-10), agitation speed (150-300 rpm), initial dye concentration (100-500 mg/L), temperature (27-80°C), contact time (10-40 min), and adsorbent dosage (0.5-1.5 g). Particle size of < 45 μm was taken as a fixed input parameter. Regression analysis showed good fit of the experimental data to the second-order polynomial model with coefficient of determination (R²) value of 0.99 and 0.98 for color removal and chemical oxygen demand (COD) reduction, respectively. Two optimum operating conditions for the adsorption of RB were found using RSM, resulted in > 99% of color removal and > 97% of COD reduction. The adsorption process was rapid and fitted to the pseudo-second-order kinetic model, while equilibrium data were favorably described by the Langmuir isotherm. The adsorbent showed excellent reusability with 0.1 M NaOH solution as desorbing agent. The findings make EGFF a promising and low-cost adsorbent for the removal of RB from aqueous solutions.     

EFFECT OF TEMPERATURE ON THE ADSORPTION OF METHYLENE BLUE DYE ONTO SULFURIC ACID–TREATED ORANGE PEEL

The present study explains the preparation and application of sulfuric acid–treated orange peel (STOP) as a new low-cost adsorbent in the removal of methylene blue (MB) dye from its aqueous solution. The effects of temperature on the operating parameters such as solution pH, adsorbent dose, initial MB dye concentration, and contact time were investigated for the removal of MB dye using STOP. The maximum adsorption of MB dye onto STOP took place in the following experimental conditions: pH of 8.0, adsorbent dose of 0.4 g, contact time of 45 min, and temperature of 30°C. The adsorption equilibrium data were tested by applying both the Langmuir and Freundlich isotherm models. It is observed that the Freundlich isotherm model fitted better than the Langmuir isotherm model, indicating multilayer adsorption, at all studied temperatures. The adsorption kinetic results showed that the pseudo-second-order model was more suitable to explain the adsorption of MB dye onto STOP. The adsorption mechanism results showed that the adsorption process was controlled by both the internal and external diffusion of MB dye molecules. The values of free energy change (ΔG ^o) and enthalpy change (ΔH ^o) indicated the spontaneous, feasible, and exothermic nature of the adsorption process. The maximum monolayer adsorption capacity of STOP was also compared with other low-cost adsorbents, and it was found that STOP was a better adsorbent for MB dye removal.     

Adsorption of different dyes from aqueous solution using Si-MCM-41 having very high surface area

Adsorption characteristics of four different dyes Safranin O (cationic), Neutral Red (neutral), Congo Red (anionic) and Reactive Red 2 (anionic) on Si-MCM-41 material having very high surface area are reported. The surface morphology of Si-MCM-41 material before and after adsorbing dye molecules are characterised by FTIR, HRXRD, nitrogen adsorption–desorption isotherms, FESEM, and HRTEM. The adsorption capacities of Si-MCM-41 for the dyes followed a decreasing order of NR > SF > CR > RR2. The adsorption kinetics, isotherm and thermodynamic parameters are investigated in detail for these dyes using calcined Si-MCM-41. The kinetics and isotherm data showed that both SF and NR adsorb more rapidly than CR and RR2, in accordance with pseudo-second-order kinetics model as well as intraparticle diffusion kinetics model and Langmuir adsorption isotherm model respectively. The thermodynamic data suggest that the dye uptake process is spontaneous. The high adsorption capacities of dyes on Si-MCM-41 (q_m = 275.5 mg g^?1 for SF, q_m = 288.2 mg g^?1 for NR) is explained on the basis of electrostatic interactions as well as H-bonding interactions between adsorbent and adsorbate molecules. Good regeneration capacity is another important aspect of the material that makes it potent for the uptake of dyes from aqueous solution.     

Adsorptive removal of congo red dye (CR) from aqueous solution by Cornulaca monacantha stem and biomass-based activated carbon: isotherm,kinetics and thermodynamics

Cornulaca monacantha stem (CS) and biomass stem-based activated carbon (CS^AC) were explored for the removal of congo red (CR) dye from water system. The biomaterial was characterized using Fourier transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET) and field emission scanning electron microscope (FESEM). The BET surface area of biomass stem-based activated carbon (CS^AC) was recorded to be 304.27 m²/g. The influence of different parameters such as initial CR concentration, adsorbent dosage, contact time, adsorbate pH and temperature onto CR adsorption were studied.The maximum adsorption of CR dye 97.19% and 86.43% were achieved at 55°C using CS^AC and CS adsorbents, respectively. The isotherm, kinetics and thermodynamic study were also investigated to explore the adsorption mechanism. The adsorption isotherm closely follow the Langmuir model (R² = 0.99) suggesting the monolayer adsorption of CR dye. Kinetic results indicated that pseudo second-order and Elovich model provide the better regression coefficient. Thermodynamic study revealed the feasible, spontaneous and endothermic nature of adsorption process. The regeneration study implies that adsorbent was efficiently recovered from CR dye with 0.01 mol/L NaOH solution. The CS^AC adsorbent possesses 75.75% uptake for CR dyes after 6th cycles of desorption-adsorption, respectively. .     

Equilibrium Isotherms,Thermodynamics, and Kinetic Studies for the Adsorption of Food Azo Dyes onto Chitosan Films

The adsorption of FD&C red 2 and FD&C yellow 5 onto chitosan films (CFs) was evaluated by equilibrium isotherms, thermodynamics, and kinetic studies. The effects of temperature (298–328 K), initial dye concentration (50–300 mg L^?1), stirring rate (50–350 rpm), and contact time (0–120 min) were investigated at pH of 2.0 and 100 mg L^?1 of CFs. The dye concentration was determined by spectrophotometry. Freundlich and Langmuir models were used to represent the equilibrium data. The Langmuir model was the more adequate to represent the equilibrium data (R² > 0.99 and average relative error <2.50%) and the maximum adsorption capacities were 494.13 and 480.00 mg g^?1 for FD&C red 2 and FD&C yellow 5, respectively, obtained at 298 K. The R_L values ranged from 0.044 to 0.145. The adsorption was exothermic, spontaneous, and favorable. For the FD&C red 2, 90% of saturation was attained at 120 min and the Elovich model was the more appropriate. For the FD&C yellow 5, 95% of saturation was attained at 20 min and the pseudo first-order model was the more adequate to fit the kinetic data. CFs were easily separated from the liquid phase after the adsorption process, providing benefits for industrial applications, and its application range can be extended for azo dyes.     

Removal of benzoic acid from industrial wastewater using metal organic frameworks: equilibrium,kinetic and thermodynamic study

In this work, the adsorption of benzoic acid (BA) over metal organic framework of chromium-benzenedicarboxylates (MIL-101) is reported for the first time. The influences of pH, contact time, initial concentration, and temperature of BA solution on the adsorption behavior were investigated. The Langmuir adsorption isotherm was adequate to represent the experimental data (R² > 0.99) and the adsorption kinetics was well-represented by a pseudo-second order kinetic model (R² > 0.96). The zeta potential of MIL-101 decreased with increasing pH confirming the importance of electrostatic interactions between MIL-101 and BA as well as the importance of the large pore volume (1.32 m³/g) and large surface area (2390 m²/g) of MIL-101 for adsorption interaction. The thermodynamics analysis indicated negative free energy, enthalpy, and entropy changes suggesting that the adsorption of BA on MIL-101 is spontaneous and exothermic. The adsorption capacity of BA adsorption over MIL-101 was compared with those for other conventional adsorbents. The maximum capacities of BA uptake on MIL-101, activate carbon, and multiwall carbon nanotubes were 769.2, 406.5, and 341.2 mg/g, respectively, suggesting the superiority of MIL-101 as an adsorbent. Adsorption of real wastewaters containing other organic compounds in addition to BA confirmed the versatility of MIL-101 as a suitable adsorbent in wastewater treatment compared with conventional adsorbents.     

Mechanistic,Kinetic, and Thermodynamic Evaluation of Adsorption of Hazardous Malachite Green onto Conch Shell Powder

The present study explores the ability of a new adsorbent—conch shell powder (CSP) in removing Malachite Green from aqueous solutions. The effect of various process parameters, namely initial solution pH, temperature, initial dye concentration, adsorbent dose, and contact time was investigated. Adsorption equilibrium data were well described by the Langmuir isotherm with maximum adsorption capacity of 92.25 mg g^?1 at 303 K. The kinetic data conformed to the pseudo-second-order kinetic model. A thermodynamic study showed the spontaneous nature and feasibility of the adsorption process. The results provide strong evidence to support the hypothesis of adsorption mechanism.     

Removal of Congo Red dye from aqueous solution using Amberlite IRA-400 in batch and fixed bed reactors

Removal of Congo Red (CR) azo dye by adsorption process using Amberlite IRA-400 resin was evaluated in both batch and fixed bed system. From the batch adsorption results, maximum loading efficiency (99.99%) of CR dye was obtained at the conditions pH 4.5, temp. 303?K, contact time 180?min., Amberlite IRA-400 dose 0.5?g. The isotherm study ascertained on favorability of adsorption process as the value of separation factor (K_L?=?0.88) and Freundlich constant (1/n?=?0.96?R²?=?0.99) than Freundlich model (R²?=?0.97). The kinetic data studied at three different CR dye concentration (50, 75, 100?mg) and results were fitted with both pseudo-first-order and second-order model equations. The values of R² obtained are of 0.95 and 0.99 for former and later one, respectively, ensuring on best fitting of pseudo-second-order kinetics and also suggesting about the chemisorptions type of adsorption. The bed depth service model was applied for competitive analysis of the CR dye adsorption in column variables indicating mass transfer from aqueous solution to Amberlite IRA-400 phase. Fourier transform infrared analysis of CR-loaded resin Amberlite IRA-400 showed a band shifted from 1057 to 1130?cm^?1 confirming CR adsorption with Amberlite IRA-400. Scanning electron microscope analysis of resin before and after adsorption was well evident from the phase patterns. Selective separation of CR dye from waste effluent of a textile industry bearing CR dye along with other trace heavy metal was achieved.     

p-Sulphonatocalix[8]arene functionalized silica resin for the enhanced removal of methylene blue from wastewater: equilibrium and kinetic study

ABSTRACT

The present investigation represents the synthesis of new p-sulphonatocalix[8]arene-based silica resin, p-SC8SR (5) and its application for the enhanced removal of methylene blue (MB) dye from contaminated water. The new p-SC8SR (5) resin was characterized by FT-IR, SEM, and EDX spectroscopy. The adsorption of MB on p-SC8SR (5) was investigated systematically by evaluating the effects of adsorbent dosage, initial pH, contact time, dye concentration, and ionic strength. Excellent adsorption (94%) of MB on p-SC8SR (5) was achieved at pH 9.5, contact time 10 min by using 0.2 mol L^?1 ionic strength and 2 × 10^?5 M initial MB dye concentration. Kinetic behavior of MB dye adsorption process on the newly synthesized p-SC8SR (5) adsorbent follows the pseudo-second-order rate model (R² = 0.998 and 0.999 for 2 × 10^?5 M and 1 × 10^?4 M, respectively). Adsorption isotherms were fitted well by the Freundlich model with excellent value of coefficient of determination (R²) = 0.995 which demonstrated that the adsorption of MB follows multilayer mechanism. Wastewater samples contaminated with MB were used to assess efficiency of the p-SC8SR (5) adsorbent. Results indicated that newly synthesized p-SC8SR (5) was found to be efficient adsorbent. During the removal process, the role of different functional groups’ cyclic structure was scrutinized and found that the ionic property as well as π–π interaction of host molecules played imperative role in the extent of adsorption.     

Adsorptive removal of cationic dye from aqueous solutions by ZnO/ZnMn2O4 nanocomposite

The ZnO/ZnMn₂O₄ nanocomposite (ZnMn) was used as adsorbent for the removal of cationic dye Basic Yellow 28 (BY28) from aqueous solutions. The adsorbent was characterized by X-ray diffraction, scanning electron microscope, TEM, Fourier transform infrared ray, BET, particle size distribution and zeta potential measurements. The adsorption parameters, such as temperature, pH and initial dye concentration, were studied. Kinetic adsorption data were analyzed using the pseudo-first-order, pseudo-second-order and intraparticle diffusion kinetic models. The Langmuir and Freundlich isotherm models were applied to fit the equilibrium data. The maximum adsorption capacity of BY28 was 48.8 mg g^?1. Various thermodynamic parameters, such as ΔG°, ΔH° and ΔS°, were calculated.     

Investigation of α‐iron oxide‐coated polymeric nanocomposites capacity for efficient heavy metal removal from aqueous solution

In the present study, PS@α‐Fe₂O₃ nanocomposites were prepared by chemical microemulsion polymerization approach and the ability of magnetic beads to remove Cu(II) ions from aqueous solutions in a batch media was investigated. Various physico‐chemical parameters such as pH, initial metal ion concentration, temperature, and equilibrium contact time were also studied. Adsorption mechanism of Cu²⁺ ions onto magnetic polymeric adsorbents has been investigated using Langmuir, Freundlich, Sips and Redlich–Petersen isotherms. The results demonstrated that the PS@α‐Fe₂O₃ nanocomposite is an effective adsorbent for Cu²⁺ ions removal. The Sips adsorption isotherm model (R² > 0.99) was more in consistence with the adsorption isotherm data of Cu(II) ions compared to other models and the maximum adsorbed amount of copper was 34.25 mg/g. The adsorption kinetics well fitted to a pseudo second‐order kinetic model. The thermodynamic parameters (ΔH°, ΔS°, and ΔG°) were calculated from the temperature dependent sorption isotherms, and the results suggested that copper adsorption was a spontaneous and exothermic process. POLYM. ENG. SCI., 55:2735–2742, 2015. © 2015 Society of Plastics Engineers     

Application of Papaya Seeds as a Macro-/Mesoporous Biosorbent for the Removal of Large Pollutant Molecule from Aqueous Solution: Equilibrium,Kinetic, and Mechanism Studies

The potential use of papaya seeds as biosorbent for the removal of a large dye molecule, Procion Red, from aqueous solution was investigated. Papaya seeds were characterized by nitrogen adsorption/desorption isotherms and scanning electron microscopy. The results revealed that the papaya seeds exhibit a macro-/mesoporous structure, which is desirable for applications in adsorption processes. The models of Langmuir, Freundlich, and Temkin were employed to fit the equilibrium data, where the Langmuir model showed the most suitable fitting. The maximum adsorption capacity for Procion red dye was found to be 73.26 mg g^?1. Pseudo-first-order, pseudo-second-order, Elovich, and intraparticle diffusion models were used to analyze the kinetic data obtained at different concentrations of dye. The adsorption process of Procion red dye followed the pseudo-second-order and intraparticle diffusion models. The results indicated that the adsorbent used in this work is adequate for the treatment of large dye molecules containing in aqueous solutions. This work highlights the potential application of papaya seeds in the field of adsorption.     

Kinetics,Thermodynamics, and Isothermic Evaluation in Sorption Study of Hazardous Dye Using Sodium Dodecylsulfate Physically Impregnated in Polyester‐Type Polyurethane Foam

Use of polyester‐type polyurethane foam (PUF) is an effective adsorbent for the removal of hazardous dye: crystal violet (CV) from an aqueous solution. In this adsorption study, the formation of hydrophobic ion pair (opposite charge attraction) between the charged species, i.e., cationic (basic) dye CV and anionic surfactant sodium dodecylsulfate (SDS) sorbed onto PUF. Chemical calculations were performed using quantum simulation to understand ion‐pair formation for CV–SDS at the semiempirical PM6 level. Adsorption studies were performed using 200 mg cylindrical PUF with an overhead stirrer in solutions containing varying compositions of the dye–surfactant mixture. The equilibrium thermodynamics and kinetics of the adsorption process were studies by measuring CV dye removal as a function of time and temperature. Results show that the formation of the dye–surfactant ion pair is necessary for effective adsorption onto PUF. Various adsorption isotherms, viz., Langmuir, Freundlich, Temkin, Dubinin–Radushkevich (DRK), Harkin‐Jura, and several kinetic models, viz., pseudo‐first order, pseudo‐second order, Elovich, and Intraparticle diffusion were used to fit the spectrophotometric result. The equilibrium adsorption data fit to the Langmuir isotherm gives the maximum adsorption of PUF as 33.39 mg g^?1 from 200 mL 5.0 × 10^?5 mol L^?1 CV solution at 298.15 K. The kinetics study showed that the overall adsorption process follows pseudo‐second‐order kinetics. The Morris–Weber model suggests that an intraparticle diffusion process is active in controlling the adsorption rate. The Freundlich, Temkin, DRK adsorption isotherms showed that solute dye transfers from solution to the PUF adsorbent surface through physical adsorption. The Langmuir and Harkin‐Jura adsorption isotherms suggest that the adsorbent surface is homogeneous in nature. The thermodynamic data showed that the adsorption process is spontaneous and endothermic with a positive enthalpy change and a negative change in Gibb's energy.     

Application of graphene-based adsorbents in the treatment of dye-contaminated wastewater; kinetic and isotherm studies

The adsorption of methylene blue (MB) on graphene-based adsorbents was tested through the batch experimental method. Two types of graphene-based adsorbents as graphene oxide (GO) and reduced graphene oxide (RGO) were compared to investigate the best adsorbent for MB removal. So that optimizing the MB removal for the selected type of graphene-based adsorbent, the diverse experimental factors, as pH (2–10), contact time (0–1440 min), adsorbent dosage (0.5–2 g/L), and initial MB concentration (25–400 mg/L) were analyzed. The conclusions indicated that the MB removal rised with an increase in the initial concentration of the MB and so rises in the amount of adsorbent used and initial pH. Maximum dye removal was calculated as 99.11% at optimal conditions after 240 min. Adsorption data were compiled by the Langmuir isotherm (R²: 0.999) and pseudo-second-order kinetic models (R²: 0.999). The Langmuir isotherm model accepted that the homogeneous surface of the GO adsorbent covering with a single layer. And the adsorption energy was calculated as 9.38 kJ mol⁻¹ according to the D-R model indicating the chemical adsorption occurred. The results show that GO could be utilized for the treatment of dye-contaminated aqueous solutions effectively.     

Removal of Rhodamine B Dye Using Activated Carbon Prepared from Palm Kernel Shell and Coated with Iron Oxide Nanoparticles

The efficacy of activated carbon prepared from Palm Kernel Shell (PKSAC) from agriculture biomass and coated with magnetic nanoparticle (Fe₃O₄) in the removal of Rhodamine B dye was investigated. Adsorption experiments were carried out at various initial pH, adsorbent dosage, initial dye concentration, particle size, and temperature. Kinetic analyses were conducted using pseudo first order, pseudo second order and intra particle diffusion models. However, the regression results showed that the adsorption kinetics was represented more accurately by the pseudo second order model. The pseudo second order kinetic constant obtained was 1.7 × 10^?4 min^?1 at 323 K when 200 mg L^?1 dye concentration was used. The equilibrium data were well described by both Langmuir and Freundlich isotherm models. The Langmuir adsorption capacity was 625 mgg^?1. The rate of adsorption improved with increasing temperature and the process was endothermic with ΔH value assessed at 80 kJmol^?1. Results obtained reveal that activated carbon prepared from Palm Kernel Shell coated with magnetic nanoparticle from agriculture biomass can be an attractive option for dye removal from industrial effluent.     

Synthesis of High Surface Area MgAl2O4 Nanopowder as Adsorbent for Leather Dye Removal

Abstract

MgAl₂O₄ nanopowder has been prepared by alkoxides hydrolysis with further calcination at temperature of 700°C. The adsorption of a leather dye, Direct Black 38, onto this material was investigated. The sample was characterized by X-ray-diffraction (XRD), N₂ adsorption–desorption isotherm and Fourier transform infrared spectroscopy. The results showed that sample present a pure phase, and the average nanocrystal size of 8 nm, the BET surface area is about 206.5 m² · g^?1 and total pore volume is about 1.44 cm³ · g^?1. Adsorption kinetics data were modeled by film and pore diffusion model. The experimental isotherm was described by the Langmuir model. MgAl₂O₄ nanopowder presented a great removal efficiency of leather dye by adsorption process, with a maximum adsorption capacity of 833 mg of dye per gram of adsorbent.     

Removal of Crystal Violet Dye from Aqueous Solution Using Calcined and Uncalcined Mixed Clay Adsorbents

In this work, calcined and uncalcined mixed clays containing kaolin, ball clay, feldspar, pyrophyllite, and quartz are examined as a potential adsorbent for the removal of crystal violet dye from aqueous solution. These clays are characterized by nitrogen adsorption/desorption isotherms, X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, and thermo gravimetric analysis (TGA). The kinetics and thermodynamic parameters as well as the effects of the pH, the temperature, and the adsorbent dosage have also been investigated. The experimental results indicate that the Langmuir model expresses the adsorption isotherm better than the Freundlich model. The obtained result showed a tremendous increase in the crystal violet adsorption capacity (1.9 × 10^?3 mol g^?1) after calcination, which is one order greater than that of the uncalcined mixed clay. The mechanism of the adsorption process is elucidated on the basis of experimental data. The percentage removal of crystal violet dye increases with increasing the pH, the temperature, and the adsorbent dosage. The investigation of kinetic studies indicates that the adsorption of crystal violet on calcined and uncalcined mixed clays could be described by the pseudo-second-order model. The negative Δ G ⁰ values obtained from the thermodynamic investigation confirm that the adsorption is spontaneous in nature. The adsorption results suggest that the calcined and uncalcined mixed clays can also be used as low cost alternatives to the expensive activated carbon for the removal of dyes from aqueous solution.     

Removal of methylene blue from aqueous solutions by adsorption onto chemically activated halloysite nanotubes

This study examines the adsorption behavior of methylene blue (MB) from aqueous solutions onto chemically activated halloysite nanotubes. Adsorption of MB depends greatly on the adsorbent dose, pH, initial concentration, temperature and contact time. The Langmuir and Freundlich models were applied to describe the equilibrium isotherms and the Langmuir model agrees very well with experimental data. The maximum adsorption capacities for MB ranged from 91.32 to 103.63 mg·g⁻¹ between 298 and 318 K. A comparison of kinetic models applied to the adsorption data was evaluated for pseudo-first-order, pseudo-second-order, Elovich and intra-particle diffusion equation. The results showed the adsorption process was well described by the pseudo-second-order and intra-particle diffusion mode. Thermodynamic parameters suggest that the adsorption is spontaneous and endothermic. The obtained results indicated that the product had the potential to be utilized as low-cost and effective alternative for dye removal in wastewater.