Phase relationships in the Na<Subscript>2</Subscript>ZnP<Subscript>2</Subscript>O<Subscript>7</Subscript>–LiKZnP<Subscript>2</Subscript>O<Subscript>7</Subscript> system

The phase relationships in the Na₂ZnP₂O₇–LiKZnP₂O₇ system are studied. They are represented by a mixture of the starting components in the subsolidus region. The eutectic was found at a temperature of 640°C and composition of 0.5LiKZnP₂O₇. The phase formation of this system is compared with the previously studied NaKZnP₂O₇–LiKZnP₂O₇ system. It is shown that a structural factor affects the geometry of the state diagrams.     

Thermal investigation of ammonioborite (NH<Subscript>4</Subscript>)<Subscript>3</Subscript>[B<Subscript>15</Subscript>O<Subscript>20</Subscript>(OH)<Subscript>8</Subscript>] · 4H<Subscript>2</Subscript>O

The thermal behavior of ammonioborite (NH₄)₃[B₁₅O₂₀(OH)₈] · 4H₂O is investigated using thermal X-ray diffraction, differential thermal analysis (DTA) in air and vacuum, and thermogravimetry. It is shown that the decomposition of the mineral (dehydration, dehydroxylation, deammoniation) proceeds in several stages, and the dehydration is accompanied by the amorphization. The thermal expansion of ammonioborite is sharply anisotropic. As in the case of other hydrous pentaborates, the thermal expansion is maximum in the direction in which pentaborate groups alternate with ammonium cations.     

Photon interaction parameters for some ZnO–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

Some photon interaction parameters such as mass attenuation coefficient, effective atomic number, half value layer, mean free path and electron density for 15ZnO–(17.5–x)Al₂O₃–xFe₂O₃–67.5P₂O₅ glass system (x = 0, 7.5, 12.5, 17.5) and 15ZnO–(25–x)Al₂O₃–xFe₂O₃–60P₂O₅ glass system (x = 0, 25) have been investigated in the photon energy range of 1 keV to 100 GeV. It has been observed that all the photon interaction parameters for the selected glass systems vary with the photon energy. Among the selected glass systems, the sample 15ZnO–25Fe₂O₃–60P₂O₅ glass system shows maximum values for mass attenuation coefficients, effective atomic numbers, electron densities and minimum values for mean free path and half value layer in the entire energy grid.     

Ultrafast Spectroscopy and Red Emission from β-Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>/β-Ga<Subscript>2</Subscript>S<Subscript>3</Subscript> Nanowires

Ultrafast pump-probe and transient photoluminescence spectroscopy were used to investigate carrier dynamics in β-Ga₂O₃ nanowires converted to β-Ga₂O₃/Ga₂S₃ under H₂S between 400 to 600 °C. The β-Ga₂O₃ nanowires exhibited broad blue emission with a lifetime of 2.4 ns which was strongly suppressed after processing at 500–600 °C giving rise to red emission centered at 680 nm with a lifetime of 19 μs. Differential absorption spectroscopy reveals that state filling occurs in states located below the conduction band edge before sulfurization, but free carrier absorption is dominant in the β-Ga₂O₃/Ga₂S₃ nanowires processed at 500 to 600 °C for probing wavelengths >500 nm related to secondary excitation of the photo-generated carriers from the mid-gap states into the conduction band of Ga₂S₃.     

Structural heterogeneity of SiO<Subscript>2</Subscript>–Na<Subscript>2</Subscript>O–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> glass

It is shown that the phase heterogeneity of SiO₂–Na₂O–Al₂O₃ glass has a liquation and crystallization nature, the balance between which is determined by the conditions of their synthesis. An increase in the aluminum oxide content decreases the number of liquation and crystallization sites, and also the linear sizes of the crystalline formations without eliminating the phase separation due to the liquation. The area of metastable immiscibility in the SiO₂–Na₂O–Al₂O₃ system, which is determined by scanning electron microscopy, is probably wider than the area detected by the optical methods.     

Hydroisomerization of Benzene-Containing Gasoline Fraction on Pt/B<Subscript>2</Subscript>O<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and Pt/WO<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalysts

The effect of the hydroisomerization conditions of the benzene-containing fraction of catalytic reforming gasoline on the yield and composition of products is studied on Pt/B₂O₃–Al₂O₃ and Pt/WO₃–Al₂O₃ catalysts. These catalysts allow benzene to be completely removed from the raw material. At the same time, the greatest yields of liquid products are obtained with minimal losses of the octane number at 2 MPa, a mass feedstock hourly space velocity (MFHSV) of 2 h^?1, and 325°C: 96.3 and 95.4 wt % on Pt/B₂O₃–Al₂O₃ and Pt/WO₃–Al₂O₃ catalysts, respectively. The activity of the catalysts is maintained for 100 h during their operation.     

Photocatalytic Removal of 17α-Ethinyl Estradiol Using the Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>/Bi<Subscript>2</Subscript>O<Subscript>4</Subscript> Photocatalyst

A series of Bi₂O₃/Bi₂O₄ composites were prepared by calcining raw materials with different NaBiO₃/KOH mass ratios. The Bi₂O₃/Bi₂O₄ photocatalysts were characterized by the various measurements and their photocatalytic performance was assessed by degradation of 17α-ethinyl estradiol (EE2). The Bi₂O₃/Bi₂O₄ photocatalysts have wider visible light absorption and lower fluorescence emission intensity than the commercial Bi₂O₃. So, they displayed superior performance in the degradation of EE2. After the adsorption equilibrium of EE2 was reached, the degradation efficiency of Bi₂O₃/Bi₂O₄ for EE2 can reach a maximum value of ~?100% in 12 min under the visible-light illumination. Degradation analysis results indicated that both holes (h⁺) and superoxide radical (·O₂^?) can affect the degradation efficiency of EE2.

Graphical Abstract

Open image in new window

     

Preparation and Photocatalytic Activity of an Inorganic–Organic Hybrid Photocatalyst Ag<Subscript>2</Subscript>WO<Subscript>4</Subscript>/g-C<Subscript>3</Subscript>N<Subscript>4</Subscript>

Ag₂WO₄/g-C₃N₄ composites with different Ag₂WO₄ concentration and calcination temperature were synthesized via a mixing and heating approach. Various techniques were used to investigate the characters of the as-prepared samples, such as thermogravimetric analysis, X-ray diffraction, Fourier transform infrared spectroscopy, UV–Vis diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy and photoluminescence spectroscopy. The degradation of rhodamine B (20 ppm) under visible light was performed to investigate the photocatalytic activity of Ag₂WO₄/g-C₃N₄ composites. Results indicate that the Ag₂WO₄/g-C₃N₄ is actually Ag/Ag₂WO₄/g-C₃N₄ ternary system. 7.5 wt% Ag₂WO₄/g-C₃N₄ prepared at 300 °C presented the best photocatalytic performance in rhodamine B degradation. The degradation rate reaches 0.0679 min^?1, which is 3.25 times higher than the value of pure g-C₃N₄. The enhanced activity is attributed to the synergetic effect of Ag₂WO₄, g-C₃N₄ and metal Ag. Additionally, cycling experiments also proved that the Ag₂WO₄/g-C₃N₄ photocatalyst has good stability.     

Porous ceramics based on the ZrO<Subscript>2</Subscript>(Y<Subscript>2</Subscript>O<Subscript>3</Subscript>)–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> system for filtration membranes

The results of the studies of the process of fabricating ceramic filtration membranes in the system ZrO₂(Y₂O₃)–Al₂O₃ are presented. The phase compositions of the precursor powders and sintered ceramics have been investigated and their porous structures have been determined. Two stages of the implementation of the technology were demonstrated: fabrication of substrates with an open porosity ranging from 20 to 47% and pore sizes in the 100–300 nm range, as well as the deposition of nanocrystalline aluminum oxide layers on them. It has been established that the pore size distribution in the membrane layer of α-Al₂O₃ is unimodal (from 30 to 100 nm).     

Vapor–Liquid Equilibrium of Binary Components of the BrCF<Subscript>2</Subscript>COOCH<Subscript>3</Subscript>–CF<Subscript>3</Subscript>COOH–BrCF<Subscript>2</Subscript>COOH–CF<Subscript>3</Subscript>COOCH<Subscript>3</Subscript> Quaternary System

Vapor–liquid equilibria of binary components of the BrCF₂COOCH₃–CF₃COOH–BrCF₂COOH–CF₃COOCH₃ quaternary system have been studied experimentally at constant pressure. The experiments have been carried out on a modified Sventoslavskii ebulliometer. Using the Aspen Plus software package, the appropriate models have been selected and the vapor–liquid equilibria for six binary systems have been simulated.     

Study on flame structures and emissions of CO and NO in Various CH<Subscript>4</Subscript>/O<Subscript>2</Subscript>/N<Subscript>2</Subscript>–O<Subscript>2</Subscript>/N<Subscript>2</Subscript> counterflow premixed flames

An oxygen-diluted partially premixed/oxygen-enriched supplemental combustion (ODPP/OESC) counterflow flame is studied in this paper. Flame images are obtained through experiments and numerical simulations with the GRI-Mech 3.0 chemistry. The oxygen dilution effects are revealed by comparing the flame structures and emissions with those of a premixed flame and partially premixed flame (PPF) at the same equivalence ratio (?_Σ = 0.95 and ? _f = 1.4). The results show that both PPF and ODPP/OESC flames have distinct double flame structures; however, the location of the premixed combustion zone and the distance between premixed/nonpremixed combustion zone are significantly different for these two cases. For the ODPP/OESC flame, the temperature in the premixed combustion zone is lower and the premixed zone itself is located farther downstream from the fuel nozzle, which leads to reduction of NO and CO emissions, as compared to those of the PPF. Therefore, by adjusting the distribution of the oxygen concentration in the premixed and nonpremixed combustion zones, the ODPP/OESC can effectively balance the chemical reaction rate in the entire combustion zone and, consequently, reduce emissions.     

Fe-doping effects on the structural and electrochemical properties of 0.5Li<Subscript>2</Subscript>MnO<Subscript>3</Subscript>·0.5LiMn<Subscript>0.5</Subscript>Ni<Subscript>0.5</Subscript>O<Subscript>2</Subscript> electrode material

With the aim of achieving a high-performance 0.5Li₂MnO₃·0.5LiMn_0.5Ni_0.5O₂ material, a series of 0.5Li₂MnO₃·0.5LiMn _x Ni _y Fe_(1−x−y)O₂ (0.3 ≤ x ≤ 0.5, 0.4 ≤ y ≤ 0.5) samples with low Fe content was synthesized via coprecipitation of carbonates. Its crystal structure and electrochemical performance were characterized by means of powder X-ray diffraction, field emission scanning electron microscopy, X-ray photoelectron spectroscopy, galvanostatic charge/discharge testing, cyclic voltammetry, and electrochemical impedance spectra. Rietveld refinements with a model integrating R [`3] \overline{3} m and Fm [`3] \overline{3} m indicate that a low concentration of Fe incorporated in 0.5Li₂MnO₃·0.5LiMn_0.5Ni_0.5O₂ decrease a disordered cubic domain of the composite structure. The preferential distribution of Fe in cubic rock-salt contributes to an unimaginable decrease of c-axis parameter of the predominant layered structure as the Fe content increases. Moreover, including Fe as a dopant can kinetically improve crystallization and also change the ratio of Mn³⁺/Mn⁴⁺ and Ni³⁺/Ni²⁺. As a result, 0.5Li₂MnO₃·0.5LiMn_0.4Ni_0.5Fe_0.1O₂ exhibits lower Warburg impedance and higher reversible capacity than the undoped material.     

Mechanical,Structural and Thermal Properties of Transparent Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–ZnO–TeO<Subscript>2</Subscript> Glass System

Oxide based optical glass materials has important potential material in many applications from fiber optic to sensor due to the high transparency and amourphous structures. The objective of this study is to synthesize the novel optical glass materials based on the bismuth and aluminum contents to be able to determine the physical, chemical and mechanical properties by considering the systematic experimental steps. In this study, Bi₂O₃–Al₂O₃ based tellurite optical glasses have been prepared by using conventional melt quenching method as a function of the both Bi₂O₃ and Al₂O₃ compositions. There is a strong interactions between the glass former and modifier ions that might effect on the structure and mechanical properties. During the experimental steps, thermal, structural and mechanical properties of the prepared glass materials have been determined considering the DTA/DSC, FT-IR spectroscopy, SEM and Vicker’s hardness techniques, respectively. Thermal parameters, like glass transition, T_g, onset, T_x, crystallization, T_p, and melting, T_m, temperatures were obtained by using DTA scan.     

Effects of ZnO–B<Subscript>2</Subscript>O<Subscript>3</Subscript> addition on sintering behaviors and microwave dielectric properties of Ba<Subscript>4</Subscript>Sm<Subscript>9.33</Subscript>Ti<Subscript>18</Subscript>O<Subscript>54</Subscript> ceramics

Effects of ZnO–B₂O₃ (ZB) addition on the densification, phase evolution and microwaves dielectric properties of Ba₄Sm_9.33Ti₁₈O₅₄ (BST) ceramics for low-temperature fired applications have been investigated. The sintering temperature of BST ceramics can be effectively lowered to about 1000°C with introduction of ZB. Tungsten bronze like single phase is observed in the BST ceramics with 0.5 and 1.0% ZB. However, Sm₂Ti₂O₇ secondary phase appears when ZB addition reaches 2%, and Sm₂Ti₂O₇ phase gradually increases with the increase ZB addition. Microwave dielectric properties of the present ceramics are strongly dependent on phase constitution and density. Optimal microwave dielectric properties of ε = 63.4, Qf = 2830 GHz, τ _f =–8.8 ppm/°C is obtained for BST ceramics with 1% ZB addition.     

Synthesis of the study of solid solutions based on the ZrO<Subscript>2</Subscript>–HfO<Subscript>2</Subscript>–Y<Subscript>2</Subscript>O<Subscript>3</Subscript>(CeO<Subscript>2</Subscript>) system

The results of the studies of the conditions of the liquid-phase synthesis of highly dispersed xerogels with a low degree of agglomeration and precursor nanopowders (~10–12 nm) based on zirconium dioxide in the ZrO₂–HfO₂–Y₂O₃(CeO₂) system are presented. The thermal decomposition of xerogels and formation of crystalline solid solutions with the structure of fluorite are investigated. The optimal conditions for the solidification of nanodispersed powders for fabricating compact ceramics based on solid solutions of ZrO₂ and the physical–chemical properties of these ceramics are studied.     

An Efficient Process for the Cyclization of N-β-hydroxyethyl-N-methyl-1,3-propanediamine to N-methylhomopiperazine Over Cu<Subscript>20</Subscript>Cr<Subscript>10</Subscript>Mg<Subscript>10</Subscript>/γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>

Abstract  

Continuous synthesis of N-methylhomopiperazine over Cu–Cr–Mg/γ-Al₂O₃ has been developed. The doped Cr improves the dispersion of the Cu⁰ particles and inhibits the generation of CuAl₂O₄ so that the Cu⁰ particles are retained as the active sites. Doped Mg neutralizes the strong acid sites in Cu₂₀Cr₁₀Mg₁₀/γ-Al₂O₃, and led to a decrease in coking side reactions. The reaction parameters were optimized and N-methylhomopiperazine was obtained in a yield of 66%.     

Vitreous region and properties of glasses of the Ga<Subscript>2</Subscript>S<Subscript>3</Subscript>–GeS<Subscript>2</Subscript>–PbF<Subscript>2</Subscript> system

Vitrification in the Ga₂S₃–GeS₂–PbF₂ system is considered. The physicochemical properties of glasses, such as density, microhardness, electroconductivity, refraction index, and transmission percentage of specimens in visible and IR ranges of spectrum are studied; differential thermal analysis is carried out; and Raman and electron paramagnetic resonance spectra are investigated.     

Physicomechanical properties of refractory Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–Si<Subscript>3</Subscript>N<Subscript>4</Subscript>–C materials with ACPC

A study has been made on the effects of the amount of silicon nitride and graphite on the physicomechanical properties of Al₂O₃–Si₃N₄–C composites for lining purposes. Adding 2.5–5.0 wt.% silicon nitride and 0.5 wt.% reactive alumina improves the properties, raises their apparent density, and increases the mechanical strength, while reducing the open porosity. Optimized compositions have been determined for refractory materials of Al₂O₃–Si₃N₄–C composition, and it has been found that to attain the higher values of physicomechanical properties the amount of graphite should constitute 5–10 wt.%.