用于质子交换膜的高质子传导率聚合物研究进展

质子传导率超过Nafion膜的质子交换膜是近年来研究的焦点。质子交换膜的质子传导率与它们的IEC值和形态有关。形成离子通道是开发高质子传导率的质子交换膜的一种有效方法。形成离子通道主要有3种:1)用嵌段共聚物的微相分离;2)侧链和支链磺化的聚合物;3)局部区域的高密集磺化。此外,与无机纳米材料形成纳米复合材料的质子交换膜也能提高质子交换膜的质子传导率及质子交换膜的机械强度、尺寸稳定性、耐氧化稳定性等性能。综述了关于用于高质子传导率的燃料电池质子交换膜(PEM)的聚合物的研究进展。对高质子传导率的燃料电池膜聚合物的发展趋势进行了展望。     

一种新型磺化聚酰亚胺质子交换膜的合成与表征

质子交换膜是质子交换膜燃料电池膜电极的核心部件之一,它的性能好坏对整个系统的运行起着至关重要的作用．目前在质子交换膜燃料电池中普遍采用的质子交换膜材料是全氟磺酸系列薄膜,这类材料具有较高的质子传导率、化学及机械稳定性,但用于直接甲醇燃料电池（DMFC）时则存在甲醇渗透、导致燃料电池输出性能大大降低的问题     

高温质子交换膜研究进展

高温质子交换膜燃料电池解决了传统质子交换膜燃料电池催化剂易受CO等杂质气体毒化、水热管理复杂等问题,成为当今燃料电池发展的主要方向。高温质子交换膜是实现高温操作的关键部分。本文结合质子传递机理,分析了以水作为质子溶剂、非水质子溶剂质子交换膜以及无机固态质子导体膜的研究现状,认为有机/无机复合膜和非水质子溶剂膜,尤其是其中的磷酸掺杂的PBI膜是高温质子交换膜的发展方向。     

磺化聚苯并咪唑/二氧化硅杂化质子交换膜的制备及性能

为改善磺化聚苯并咪唑的综合性能,用异氰酸丙基三乙氧基硅烷作为偶联剂,正硅酸乙酯作为前驱体,在膜内生成有机-无机杂化交联网络,制备了燃料电池用高温质子交换膜。利用傅里叶转变红外光谱（FTIR）表征了聚合物膜的化学结构。用扫描电镜(SEM)观察了聚合物膜的断面形貌。利用交流阻抗（EIS）测定了聚合物膜在磷酸掺杂后的质子传导率。研究结果表明,硅烷偶联剂的加入使得界面相容性良好。由于存在有机-无机交联结构,在膜的溶胀增加不大的前提下,磷酸掺杂量得到了增加,相应地增加了聚合物膜的质子传导率。     

燃料电池用非氟复合质子交换膜的研究进展

介绍了几种非氟复合质子交换膜,包括有机-无机杂化材料质子交换膜(ORMOER)和基于聚苯并咪唑(PBI)、磺化聚醚醚酮(SPEEK)的复合质子交换膜,主要从制备方法出发分析了每种复合膜的优缺点以及在燃料电池(PEMFC)中的应用前景。     

燃料电池高温质子交换膜研究进展

高温质子交换膜燃料电池具有反应动力学快、CO耐受性高等特点,但磷酸掺杂的高温质子交换膜因磷酸的流失和聚合物的降解等原因导致燃料电池的输出功率发生衰减。本文通过介绍聚苯并咪唑衍生物的高温质子交换膜、聚苯并咪唑的复合型质子交换膜、新型芳基聚合物的高温质子交换膜,阐明聚合物的主链结构、官能团结构以及复合填料对高温质子交换膜性能的影响。在近期的研究报道中,提高膜性能的主要策略包括提升自由体积、建立交联结构、嵌段共聚、复合掺杂（ILs、MOFs、PIMs、MO_x）、阳离子官能团修饰等。文章指出,在未来的研究中应该加强对磷酸基高温质子交换膜质子传输通道结构的进一步理解,关注聚合物化学降解和物理性能衰败的原因,并开发更多的新型聚合物材料。     

Nafion/HZSM-5有相-无机复合质子交换膜的制备与性能研究

通过重铸的方法制备了Nafion/HZSM-5有机-无机复合质子交换膜,研究了添加HZSM-5纳米沸石分子筛颗粒对Nafion膜的结构、水吸收、质子传导率、热稳定性和化学稳定性的影响.与纯的重铸Nafion膜相比,含有5%(质量分数)HZSM-5分子筛的Nafion/HZSM-5复合膜具有更高的质子传导率,当HZSM-5的质量分数高于5%时,复合膜的质子电导率随着HZSM-5含量的增加有所降低,而Nafion/HZSM-5复合膜的水吸收率在HZSM-5质量分数为7.5%时最高,Nafion/HTSM-5复合膜的降解温度也高于纯的重铸的Nafion膜,Nafion/HZSM-5复合膜性能的提高可能与HZSM-5的酸性和特殊的孔道结构有关.     

燃料电池用质子交换膜

介绍了燃料电池用含氟质子交换膜的研究历程、应用、结构与性能的关系及当前针对性的改进,归纳了磺化碳氢聚合物、有机无机复合物、离子交联聚合物和无机固体酸等非氟质子交换膜的代表性研究,指出了各利非氟质子交换膜的优点和不足,对质子交换膜的发展做了相应的展望。     

质子交换膜燃料电池关键技术研究进展

简述了质子交换膜燃料电池(PEMFC)的工作原理及特点；综述了PEMFC关键技术的最新研究进展，包括质子交换膜合成、电催化剂制备、膜电极工艺及水管理和热控制；并简介了我国PEMFC的开发情况。     

质子交换膜燃料电池的研究进展

质子交换膜燃料电池（PEMFC）是一种高效节能、工作稳定、环境友好的理想发电装置。质子交换膜是PEMFC的核心组成,是一种选择透过性膜,主要起传导质子、分割氧化剂与还原剂的作用。PEMFC用电催化剂主要为铂系电催化剂,为降低成本,提高铂的利用率和开发非铂系催化剂是今后催化剂研究的主要方向之一。对PEMFC电极的工作原理,关键组件及电池的水管理、热管理方法等作了综述。     

Polymer membranes for high temperature proton exchange membrane fuel cell: Recent advances and challenges

Proton-exchange membrane fuel cells (PEMFCs) are considered to be a promising technology for efficient power generation in the 21st century. Currently, high temperature proton exchange membrane fuel cells (HT-PEMFC) offer several advantages, such as high proton conductivity, low permeability to fuel, low electro-osmotic drag coefficient, good chemical/thermal stability, good mechanical properties and low cost. Owing to the aforementioned features, high temperature proton exchange membrane fuel cells have been utilized more widely compared to low temperature proton exchange membrane fuel cells, which contain certain limitations, such as carbon monoxide poisoning, heat management, water leaching, etc. This review examines the inspiration for HT-PEMFC development, the technological constraints, and recent advances. Various classes of polymers, such as sulfonated hydrocarbon polymers, acid-base polymers and blend polymers, have been analyzed to fulfill the key requirements of high temperature operation of proton exchange membrane fuel cells (PEMFC). The effect of inorganic additives on the performance of HT-PEMFC has been scrutinized. A detailed discussion of the synthesis of polymer, membrane fabrication and physicochemical characterizations is provided. The proton conductivity and cell performance of the polymeric membranes can be improved by high temperature treatment. The mechanical and water retention properties have shown significant improvement., However, there is scope for further research from the perspective of achieving improvements in certain areas, such as optimizing the thermal and chemical stability of the polymer, acid management, and the integral interface between the electrode and membrane.     

Recent advances in polybenzimidazole/phosphoric acid membranes for high‐temperature fuel cells

Proton exchange membrane fuel cells are one of the most promising technologies for sustainable power generation in the future. In particular, high‐temperature proton exchange membrane fuel cells (HT‐PEMFCs) offer several advantages such as increased kinetics, reduced catalyst poisoning and better heat management. One of the essential components of a HT‐PEMFC is the proton exchange membrane, which has to possess good proton conductivity as well as stability and durability at the required operating temperatures. Amongst the various membrane candidates, phosphoric acid‐impregnated polybenzimidazole‐type polymer membranes (PBI/PA) are considered the most mature and some of the most promising, providing the necessary characteristics for good performance in HT‐PEMFCs. This review aims to examine the recent advances made in the understanding and fabrication of PBI/PA membranes, and offers a perspective on the future and prospects of deployment of this technology in the fuel cell market. © 2014 Society of Chemical Industry     

Study of high-temperature proton exchange membrane through one-step encapsulation of ionic liquid in sulfonated poly(ether ether ketone)

The proton exchange membrane (PEM) is the core component of a high-performance proton exchange membrane fuel cell (PEMFC). Since the traditional PEM has the disadvantages of poor cell performance and high cost, a new kind of PEM with good proton conductivity, low cost and simple preparation should be explored. In this paper, several different binary hybrid membranes were successfully prepared through one-step encapsulation of different ionic liquids (ILs) in sulfonated poly(ether ether ketone) (SPEEK). The prepared membranes were characterized by scanning electron microscope (SEM), thermogravimetric analysis (TG), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), proton conductivity measurements and dynamic mechanical analysis (DMA). SEM images showed that ILs were fully doped into SPEEK. FT-IR and XPS proved that SPEEK and IL formed a new chemical bond combined with intermolecular hydrogen bonds. The TG results showed that the binary hybrid membranes could maintain stability even at 300°C. The water uptake and swelling ratio showed that the water absorption capacity of the binary composite membrane played a vital role in improving proton conductivity. The proton conductivity study showed that ILs doping also helped to improve the proton conductivity of the SPEEK membrane. When the doping amount of IL was maintained at 30 wt.%, it has the highest proton conductivity, 25 mS cm⁻¹ at 120°C. It was proved that anhydrous hybrid membrane tetraphenyl imidazole sulfate/SPEEK ([IM2][H₂PO₄]/SPEEK) could be used in PEMFC at medium temperature.     

用于高温质子交换膜燃料电池的聚合物电解质膜研究进展

高温质子交换膜燃料电池在降低燃料电池水热管理复杂性、催化剂中毒方面有明显优势;可改善电池阴阳两极尤其是阴极氧气还原反应的动力学特性,提高电池的效率。聚合物电解质膜作为关键材料之一,在高温时易失水导致质子传导率降低、机械强度和热稳定性不高等问题。本文基于磺酸、磷酸和离子液体等不同质子传递介质,对高温聚合物电解质膜进行综述,比较了各类聚合物电解质膜的优缺点及应用时存在的问题,着重探讨嵌段共聚物在高温聚合物电解质膜方面的潜在应用,指出离子液体的添加不但可作为质子载体,而且在构建嵌段聚合物结构方面可发挥"诱导剂"作用。提出通过分子设计可更好了解嵌段聚合物的空间构效关系,进而通过结构设计提高膜的质子传导性能和稳定性。     

基于PVDF薄膜辐照接枝制备质子交换膜

含氟磺酸型质子交换膜是一类具有高热稳定性、化学稳定性及良好力学性能的离子交换膜,具有极其广阔的应用前景。采用⁶⁰Co辐照接枝技术,在聚偏氟乙烯（PVDF）基膜上产生自由基聚合位点,进而接枝对苯乙烯磺酰氯单体,经过一定条件酸碱处理得到一种新型偏氟磺酸型质子交换膜。并对其进行红外分析,结果显示PVDF膜上成功接枝上了对苯乙烯磺酰氯单体;定量研究了在相同辐照总剂量、不同剂量率条件下,所得质子交换膜的质子传导率、吸水率及离子交换容量与接枝率的关系,结果表明：当剂量率为40 Gy·min^-1时,所得质子交换膜接枝率为52.7%,吸水率为36.85%,80℃时质子传导率达到136 mS·cm^-1,离子交换容量为1.274 mmol·g^-1。     

Sulfonated polyether ether ketone composite proton exchange membranes incorporated with a novel hierarchical-structure hybrid nanofiller consisting solid superacid zirconium phosphate and CNTs

How to simultaneously improved the proton conductivity and mechanical strength is a key problem facing currently used proton exchange membranes (PEMs). Herein, a solid inorganic superacid-zirconium phosphate (ZrP) with a two-dimensional layer structure was combined with one-dimensional carbon nanotubes (CNTs) to prepare hybrid nanofiller ZrP-CNTs by an in situ chemical deposition method. The new hybrid nanofiller was then applied to modify sulfonated polyether ether ketone (SPEEK), a widely used PEM matrix, to obtain a series of composite membranes. The structure and properties of the membranes were fully characterized by SEM, XRD, FTIR, TG, tensile properties, and proton conductivity. The results showed that the proton conductivities of the membranes were significantly improved due to the addition of super solid acid-ZrP that has abundant proton sources or proton sites. Moreover, the composite membranes exhibited better mechanical properties and thermal stability than those of pure SPEEK membrane, owing to the great interface interaction and good compatibility between ZrP-CNTs and SPEEK. The composite membrane (2 wt% ZrP-CNTs) demonstrated the optimal comprehensive performance. Its proton conductivity was 36.63 mS cm⁻¹ and its tensile strength was 37.56 MPa, which was 70% and 10%, respectively, higher than those of the pure SPEEK membrane under the same condition.     

A novel polybenzimidazole composite modified by sulfonated graphene oxide for high temperature proton exchange membrane fuel cells in anhydrous atmosphere

A novel functional graphene with high ion exchange capacity (IEC) was prepared by grafting reaction induced by ⁶⁰Co γ‐ray irradiation using graphene oxide. Then, polybenzimidazole/radiation grafting graphene oxide (PBI/RGO) composite membranes were prepared by the solution‐casting method and doped with phosphoric acid (PA) to improve their proton conductivity. The properties of PBI/GO/PA and PBI/RGO/PA membranes including the PA doping level, chemical stability, proton conductivity and mechanical properties were evaluated and compared. The tensile strength of PBI/RGO/PA membranes (ranging from 27.3 to 38.5 MPa) increases at first and then decreases with the increase of the RGO content, and is significantly higher than that of other PA doped PBI‐based membranes. The proton conductivity of PBI/RGO‐3/PA membrane is 28.0 mS cm^?1 at 170 °C without humidity, with an increase of 72.0% compared with that of PBI/PA membrane. These results suggest that PBI/RGO/PA membranes have the potential to be used as high‐temperature proton exchange membranes. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44986.     

质子交换膜燃料电池用磺化聚醚醚酮膜的研究进展

Nafion膜具有优良的化学稳定性和导电性能,但是它成本高,高温下几乎不导电。本文回顾了Nafion替代膜之一——磺化聚醚醚酮（SPEEK）膜及SPEEK/离子液体（IL）复合膜的研究进展。介绍了SPEEK制备的两种方法：直接磺化法和磺化单体聚合法,其中直接磺化法工艺简单,但磺化度（DS）≤1.0,反应较难控制;磺化单体聚合法DS可控,但工艺复杂,原料有毒。简述了温度、反应时间、原料配比、磺化单体种类、制膜工艺及溶剂对SPEEK膜性能的影响：直接磺化法中DS与温度成负相关,与反应时间成正相关,与原料配比关系不大;磺化单体聚合法中DS受磺化单体的种类和氟酮与磺化氟酮的比例影响较大。着重介绍了SPEEK/咪唑离子液体复合膜和SPEEK/季铵盐离子液体复合膜的研究现状及应用于质子交换膜燃料电池（PEMFC）时存在的问题。最后对SPEEK/IL复合膜未来的研究方向进行了展望,即解决燃料电池运行过程中复合膜中离子液体流失及与Pt基催化剂相容性等关键问题,以提高PEMFC的性能。