Stannum-(II) dopant effects on morphology evolution and upconversion performance of Yb3+/Er3+:NaGdF4 crystals

Hexagonal Yb³⁺/Er³⁺:NaGdF₄ nanocrystals codoped with Sn²⁺ ions were prepared via a modulated solvothermal method. Upon introducing 25mol% Sn²⁺ ions into the host lattice by substituting Gd³⁺ ions, a portion of Yb³⁺/Er³⁺:NaGdF₄ nanocrystals was converted into nanorods. Meanwhile, the upconversion (UC) luminescence intensity of 542 nm and 652 nm were intensified by 24 and 33 times respectively, when compared with samples without Sn²⁺ ions doping. The effect of Sn²⁺ ions doping content on the morphology and UC emission performances of Yb³⁺/Er³⁺:NaGdF₄ nanocrystals were discussed in detail. The enhancement of UC luminescence intensity could be attributed to the growth of UC nanocrystals and the low crystal local symmetry around Yb³⁺/Er³⁺ ion pairs. This study may be beneficial for fabricating high-performance UC materials and realizing their practical applications.     

Effect of crystalline fraction on upconversion luminescence in Er3+/Yb3+ Co-doped NaYF4 oxyfluoride glass-ceramics

The crystalline fraction were adjusted MgO concentration and the corresponding effect on upconversion (UC) luminescence in Er³⁺/Yb³⁺ co-doped NaYF₄ oxyfluorode glass-ceramics was investigated. With increase of MgO and the content of Na₂O reduced, the internal network structure of the glass became compact, which made the size of NaYF₄ nanocrystals unchanged, while the average distance between the nanocrystals increased significantly. Crystal growth is limited with the glass network, keeping the crystal size not changed. SNM-1 glass ceramics samples show a predominant red up-conversion emission under near infrared excitation at 980 nm, while a predominant green emission is observed in the SNM-3 samples. In this paper, it was indicated that it changed the effect of glass network modifier MgO in the glass structure. The possible mechanism responsible for the color variation of UC in Er³⁺/Yb³⁺ co-doped was discussed.     

Bright red upconversion luminescence from Er3+ and Yb3+ co-doped ZnO-TiO2 composite phosphor powder

ZnO-TiO₂ composites co-doped with Er³⁺ and Yb³⁺ ions were successfully synthesized by powder-solution mixing method and their upconversion (UC) luminescence was evaluated. The effect of firing temperature, ZnO/TiO₂ mixing ratio, and dopant concentration ranges on structural and UC luminescence properties was investigated. The crystal structure of the product was studied and calculated in detail by means of X-ray diffraction (XRD). Also, the site preference of Er³⁺ and Yb³⁺ ions in the host material was considered and analyzed based on XRD results and UC luminescence characteristics. Brightest UC luminescence was observed in the ZnO-TiO₂:Er³⁺,Yb³⁺ phosphor fired at 1300 °C in which the system consisted of mixed phases; Zn₂TiO₄, TiO₂, RE₂Ti₂O₇ and RE₂TiO₅ (RE = Er³⁺ and/or Yb³⁺). Under the excitation of a 980 nm laser, the two emission bands were detected in the UC emission spectrum, weak green band centered at 544 and 559 nm, and strong red band centered at 657 and 675 nm wavelengths in accordance with ²H_11/2, ⁴S_3/2 → ⁴I_15/2 and ⁴F_9/2 → ⁴I_15/2 transitions of Er³⁺ ion, respectively. The simple chemical formula equations, for explaining the site preference of Er³⁺ and Yb³⁺ ions in host crystal matrix, were generated by considering the Zn₂TiO₄ crystal structure, its crystal properties, and the effect of Er³⁺ and Yb³⁺ ions to the host crystal matrix. The UC emission intensity of the products was changed by varying ZnO/TiO₂ mixing ratios, and Er³⁺ and Yb³⁺ concentrations. The best suitable condition for emitting the brightest UC emission was 1ZnO:1TiO₂ doped with 3 mol% Er³⁺, 9 mol% Yb³⁺ fired at 1300 °C for 1 h.     

Effect of ligand field symmetry on upconversion luminescence in heat‐treated LaBGeO5:Yb3+, Er3+ glass

In this paper, we report upconversion (UC) luminescence enhancement in LaBGeO₅:Yb³⁺, Er³⁺ glass‐ceramics (GCs), surface crystallized glass‐ceramics (SCGCs) and ceramics compared with the as‐melt glass fabricated by the conventional melt‐quenching technique. Based on structural investigations, we find that the nucleation and crystallization of trigonal stillwellite LaBGeO₅:Yb³⁺, Er³⁺ nanocrystals occur first at the glass surface before the following volume crystallization. The local site symmetry around rare earth (RE) ions which was evaluated using the Eu³⁺ ions as a probe together with Judd‐Ofelt theory calculations exhibits a clear increase with the devitrification of the glass. Consequently, complete crystallization of the glass leads to largest enhancement in the UC emissions of the LaBGeO₅:Yb³⁺, Er³⁺ ceramics. We ascribe the enhancement of UC luminescence in the LaBGeO₅:Yb³⁺, Er³⁺ GCs, SCGCs, and ceramics to the structural ordering and the improvement of site symmetry surrounding RE ions that minimizes the rate of nonradiative relaxation process.     

Controlled Synthesis of BaYF<Subscript>5</Subscript>:Er<Superscript>3+</Superscript>, Yb<Superscript>3+</Superscript> with Different Morphology for the Enhancement of Upconversion Luminescence

In this work, Er³⁺/Yb³⁺-codoped BaYF₅ with different sizes and shapes have been synthesized by a simple solvothermal method. By changing the fluoride source, pH value, solvent, surfactants, Yb³⁺ concentration, temperature, and reaction time, the optimum synthetic conditions of BaYF₅:Er³⁺, Yb³⁺ were found to improve the upconversion luminescent properties. It is found that the emission intensity of green and red light is enhanced for several times by the way of using NaBF₄ as a fluoride source with the comparison of NH₄F and NaF. Moreover, the effects of different surfactants are not the same. Adding 5% polyetherimide (PEI) as surfactant can also improve the upconversion emission. On the contrary, when sodium citrate (CIT) as another surfactant was used to add, the sizes of the nanocrystals were gradually increased and the luminous properties also declined.     

Enhanced upconverted luminescence and the optical thermometry behavior of Er3+-doped BaYbF5 transparent glass ceramics

Transparent SiO₂ - Al₂O₃ - Na₂O - CaO - BaF₂ - YbF₃ glass ceramics (GC) doped with Er³⁺ ions were successfully fabricated by a melt-quenching technique with subsequent heat treatment. The formation of BaYbF₅ nano-crystalline phase was confirmed by X-ray diffraction and transmission electron microscopy. Compared to the precursor glass (PG), the clearer Stark splitting and greatly enhanced up-conversion (UC) emission in GC indicate that Er³⁺ ions mainly enter into BaYbF₅ nanocrystals with low phonon energy after crystallization. The temperature dependent on purple UC emission ratio (which is due to the Er^{3+ 4}G_11/2→⁴I_15/2 and ²H_9/2→⁴I_15/2 transitions) and common green UC emission ratio with low-power excitation in BaYbF₅ GC have been studied respectively. In addition, the UC mechanisms in PG and GC are illustrated and analyzed. The outstanding properties of Er³⁺-doped BaYbF₅ transparent GC may present potential applications in all-solid-state UC lasers and optical fiber temperature sensors.     

Enhanced upconversion study of Er3+-Yb3+ codoped NaYF4 phosphors synthesized by the reverse microemulsion method

Herein, nanocrystals of Er³⁺ and Er³⁺, Yb³⁺ co-doped NaYF₄ upconversion (UC) phosphor were prepared via the reverse-microemulsion method. The impact of different concentrations of Er³⁺ ions on the UC emission intensity after 980?nm diode laser excitation is discussed. The structure, morphology and composition of the nanophosphors were confirmed by X-ray diffraction, transmission electron microscopy, scanning electron microscopy and the results showed the presence of NaYF₄ nanocrystals with hexagonal phases of NaYF₄. The UC spectra revealed two emission bands including a green and a red emission band and the CIE coordinate for the samples were estimated. The present research revealed that the reverse-microemulsion approach will be suitable for the synthesis of efficient upconversion nanophosphors.     

Near-infrared photo-responsive Er3+-K+ co-doped Y2O3 phosphors with enhanced UC luminescence

Y₂O₃: x% Er³⁺ (x=5, 7, 10, 12, 15) and Y₂O₃: 10% Er³⁺，x% K⁺ (x=0, 1, 3, 5, 7, 10, 15) phosphors were successfully prepared by a low-temperature combustion method. The structure as well as the absorption/emission spectra of phosphors were investigated. The effect of doping concentration of K⁺ ions on the upconversion (UC) luminescence of Y₂O₃: 10% Er³⁺ phosphor was examined and the possible optical transitions were discussed. The results showed that K⁺ ion doping not only changed the microstructure and crystallinity of the phosphors, but also enhanced its UC luminescence intensity. The Y₂O₃: 10% Er³⁺, 7% K⁺ phosphor exhibit the strongest UC emission intensity. Compared with the Y₂O₃: 10% Er³⁺ phosphor, the UC luminescence intensity at 563 nm and 661 nm was enhanced by 67.8 and 27.3 times for the K-codoped samples, respectively. The phosphor with the optimal doping concentration was mixed with a polymer to form a composite film, which was employed for the fabrication of near-infrared (NIR) photo-responsive detection devices. The device exhibited strong photo-current response to NIR light at 980 nm, implying that our work could inspire new design strategy for the development of NIR photo-detection devices.     

A Novel Multifunctional Upconversion Phosphor: Yb3+/Er3+ Codoped La2S3

Yb³⁺/Er³⁺ codoped La₂S₃ upconversion (UC) phosphors have been synthesized using high‐temperature solid‐state method. Under 971‐nm excitation, the maximum luminescence power can reach 0.64 mW at the excitation power density of 16 W/cm² and an absolute power yield of 0.36% was determined by an absolute method at the excitation power density of 3 W/cm², and the quantum yield of La₂S₃:Yb³⁺, Er³⁺ (green ~0.18%, red ~0.03%, integration ~0.21) was comparable to that of NaYF₄:Yb³⁺, Er³⁺ nanocrystals (integration ~0.005–0.30). Frequency upconverted emissions from two thermally coupled excited states of Er³⁺ were recorded in the temperature range 100–900 K. The maximum sensitivity of temperature sensing is 0.0075 K^?1. As the excitation power density increases, the temperature of host materials rapidly rises and the top temperature can reach to 600 K. Given the intense UC emission, high sensitivity, as well as good photothermal stability, La₂S₃:Yb³⁺/Er³⁺ phosphor can become a promising composite material for photothermal ablation of cancer cells possessing the functions of temperature sensing and in vivo imaging.     

Color tunable up-conversion emission of ZrO2:Yb3+, Er3+ thin films prepared by chemical solution deposition

The color-tunable up-conversion (UC) emission was observed in ZrO₂:Yb³⁺, Er³⁺ thin films synthesized on fused silica substrates using a chemical solution deposition method. The crystal structure, surface morphology image and optical transmittance of ZrO₂:Yb³⁺, Er³⁺ thin films were detected in the matter of Yb³⁺/Er³⁺ doping content. Under excitation by 980?nm infrared light, intense UC emission can be obtained from ZrO₂:Yb³⁺, Er³⁺ thin films. Photoluminescence study shows that there are two emission bands centered at 548?nm and 660?nm in the UC luminescence spectra, which can be owing to (²H_11/2,⁴S_3/2)→⁴I_15/2 and ⁴F_9/2→⁴I_15/2 transitions of Er³⁺ ions, respectively. In addition, the color coordinate of UC emission between green-red can be tuned by properly adjusting the dopant concentration, because the composition of Yb³⁺/Er³⁺ affect the red/green ratio via the process of cross relaxation and energy back transfer. Our study suggests that ZrO₂:Yb³⁺, Er³⁺ thin films can be considered as promising materials for new photoluminescence devices.     

Wide‐range thermometry based on green up‐conversion luminescence of K3LuF6:Yb3+/Er3+ bulk oxyfluoride glass ceramics

Yb³⁺/Er³⁺ ions codoped bulk glass ceramics (GC) with embedded monoclinic K₃LuF₆ nanocrystals are reported for potential temperature‐sensing application by using the fluorescence intensity ratio method. Such GC with good transparency and enhanced up‐conversion were prepared by the simple conversional melt‐quenching method and subsequent annealing process. Optical, structural, and temperature‐sensing up‐conversion properties were characterized systematically. Optical spectroscopy analysis confirms the incorporation of Yb³⁺/Er³⁺ into the K₃LuF₆ crystalline lattice, resulting in enhanced up‐conversion luminescence. Compared to other Er³⁺‐doped typical systems, Er³⁺ ions in K₃LuF₆ GC present large energy gap (870 cm^?1) and high relative sensitivity (37.6 × 10^?4 K^?1 at 625 K), revealing that K₃LuF₆:Yb³⁺/Er³⁺ GC can be excellent candidates for optical thermometers.     

REVO4‐Based Nanomaterials (RE = Y,La, Gd,and Lu) as Hosts for Yb3+/Ho3+, Yb3+/Er3+, and Yb3+/Tm3+ Ions: Structural and Up‐Conversion Luminescence Studies

Rare‐earth vanadates of the form REVO₄ (RE = Y, La, Gd, and Lu) doped by Yb³⁺/Ho³⁺, Yb³⁺/Er³⁺_, or Yb³⁺/Tm³⁺ lanthanide ions were successfully synthesized using the sol–gel method and annealing at 600°C in an air atmosphere. The structure and morphology of the prepared nanocrystals were investigated by X‐ray diffraction, thermogravimetric analysis, transmission electron microscopy, and energy‐dispersive X‐ray spectroscopy. All prepared materials were homogenous and had nanosized dimensions. Their elemental compositions were confirmed by optical emission spectrometry. Spectroscopic analysis of the materials was carried out by measuring excitation and emission spectra, luminescence decays, and dependence between the intensity of the luminescence and the laser energy. Following effective excitation by NIR radiation, Ln³⁺ co‐doped vanadate matrices exhibited a strong up‐conversion (UC) luminescence. Differences in spectroscopic properties between monoclinic LaVO₄ and tetragonal YVO₄, GdVO₄, or LuVO₄ doped by Ln³⁺ ions were observed, indicating the influence of the crystal structure on the UC emission. Drawing conclusions from these spectroscopic investigations, the UC mechanisms were proposed, including energy‐transfer processes between Yb³⁺ ions and emitting ions.     

Visible up-conversion luminescence of CaWO<Subscript>4</Subscript>: Er<Superscript>3+</Superscript>,Yb<Superscript>3+</Superscript> and emission enhancement by tri-doping of Li<Superscript>+</Superscript> ions

Er³⁺,Yb³⁺ co-doped CaWO₄ polycrystalline powders were prepared by a solid-state reaction and their up-conversion (UC) luminescence properties were investigated in detail. Under 980 nm laser excitation, CaWO₄: Er³⁺,Yb³⁺ powder exhibited green UC emission peaks at 530 and 550 nm, which were due to the transitions of Er³⁺ (²H_11/2)→Er³⁺ (⁴I_15/2) and Er³⁺ (⁴S_3/2)→Er³⁺ (⁴I_15/2), respectively. Effects of Li+ tri-doping into CaWO₄: Er³⁺,Yb³⁺ were investigated. The introduction of Li⁺ ions reduced the optimum calcinations temperature about 100 °C by a liquid-phase sintering process and the UC emission intensity was remarkably enhanced by Li⁺ ions, which could be attributed to the lowering of the symmetry of the crystal field around Er³⁺ ions.     

Preparation,Structure, and Up‐Conversion Luminescence of Yb3+/Er3+ Codoped SrIn2O4 Phosphors

SrIn₂O₄, which shows lower phonon energy than CaIn₂O₄, is not only a good photocatalyst but also can be an excellent up‐conversion (UC) host to exhibits UC luminescence. In this work, Yb³⁺ and/or Er³⁺ doped SrIn₂O₄ phosphors were synthesized, and their UC luminescence properties were studied and compared with those in the CaIn₂O₄ host. The structure of SrIn₂O₄: 0.01Er³⁺ and SrIn₂O₄: 0.1Yb³⁺/0.01Er³⁺ samples were refined by the Rietveld method and found to that SrIn₂O₄: 0.1Yb³⁺/0.01Er³⁺ showed increasing unit cell parameters and cell volume, indicating In³⁺ sites were substituted successfully by Yb³⁺ and/or Er³⁺ ions. From the UC luminescence spectra and diffuse reflection spectra, Er³⁺‐doped SrIn₂O₄ showed very weak luminescence due to ground state absorption of Er³⁺; Yb³⁺/Er³⁺ codoped SrIn₂O₄ presented strong green (550 nm) and red (663 nm) UC emissions which were assigned to energy transfer from Yb³⁺ transition ²F_7/2→²F_5/2 to the Er³⁺ transition ⁴S_3/2 → ⁴I_15/2 and ⁴F_9/2 → ⁴I_15/2. Comparing with CaIn₂O₄, Yb³⁺/Er³⁺ codoped SrIn₂O₄ showed obvious advantages with higher UC luminescent intensity. The pumping powers study showed that UC emissions in Yb³⁺/Er³⁺ codoped SrIn₂O₄ were attributed to energy transfer of Yb³⁺→Er³⁺ with a two‐photon process. The possible UC luminescent mechanism of Yb³⁺/Er³⁺‐doped SrIn₂O₄ was discussed.     

Evolution of Strong Red Upconversion Luminescence in Er3+‐Containing Oxy‐Fluoride Glass and Glass‐Ceramics

The Er³⁺ concentration dependencies of upconversion luminescence in oxy‐fluoride glass and glass‐ceramics containing PbF₂ nanocrystals were investigated. Strong red emission from the ⁴F_9/2 → ⁴I_15/2 transition was observed with the addition of ~0.8 mol% Er³⁺ ions, whereas ~10 mol% of Er³⁺ is required to achieve such emission in several other crystalline hosts. Intensities of red emission further increased with the formation of nanocrystals through heat treatment. The Er³⁺ ions enriched in glass and segregated preferentially inside the PbF₂ nanocrystals that decreased the distance among Er³⁺ ions and thereby facilitated energy transfer.     

Visible green upconversion luminescence of Er3+/Yb3+/Li+ co-doped CaWO4 particles

The upconversion (UC) luminescence of Li⁺/Er³⁺/Yb³⁺ co-doped CaWO₄ phosphors is investigated in detail. Single crystallized CaWO₄:Li⁺/Er³⁺/Yb³⁺ phosphor can be obtained, co-doped up to 25.0/5.0/20.0 mol% (Li⁺/Er³⁺/Yb³⁺) by solid-state reaction. Under 980 nm excitation, CaWO₄:Li⁺/Er³⁺/Yb³⁺ phosphor exhibited strong green UC emissions visible to the naked eye at 530 and 550 nm induced by the intra-4f transitions of Er³⁺ (²H_11/2,⁴S_3/2→⁴I_15/2). The optimum doping concentrations of Yb³⁺/Li⁺ for the highest UC luminescence were verified to be 10/15 mol%, and a possible UC mechanism that depends on the pumping power is discussed in detail.     

Unveiling the mechanisms of defects induced upconversion luminescence enhancement in Er3+-sensitized 2D Bi3O4Br nanosheets

Lanthanide (Ln³⁺) ions doped upconversion (UC) nanosheets have attracted tremendous attention such as displays, sensing, bioimaging and lasers etc, which was benefitting from the intriguing optical characters of Ln³⁺. However, the field of UC nanosheets has been hindered by low UC conversion efficiencies associate with nonradiative relation (NR) occurring by defect, the existence and influence of defects still cannot be eliminated completely. In this work, we design introduce the impurity energy level by doping Er³⁺in Bi₃O₄Br:Er³⁺ nanocrystal materials, which was closed with the intermediate band (IB) formed by oxygen vacancies defects. The density functional theory calculations confirm the IB energy level was closed with the intermediate excited states of Er³⁺, which provided the potential to tailored the ground state carriers transition from matrix semiconductor to Er³⁺ and thus tool to counteract the effect of NR and even enhance the UC luminescence performance. The photo-current results evidenced that the photocarrier success transition from IB to Er³⁺ intermediate excited states energy level leads to a sharp decrease in the surface carrier, on the contrary, the electron population on the excited state energy level of Er³⁺ have increased. As a result, compared with unmodified sample the UC emission intensity under excited by 980 nm of green and red is enhanced by 7 and 4 times respectively. This work paves the way to design efficient UC nanosheets through by energy transfer (ET) combine matrix semiconductor with RE and greatly enriches the understanding about the ET behavior of RE.     

BiLaWO6: Er3+/Tm3+/Yb3+ phosphor: Study of multiple fluorescence intensity ratiometric thermometry at cryogenic temperatures

Highly thermally stable Er³⁺/Tm³⁺/Yb³⁺ tri-doped bismuth lanthanum tungstate phosphors were prepared by high temperature solid-state reaction method. The structural and morphological properties of the prepared phosphors were analysed by X-ray diffraction (XRD), Raman spectroscopy and Scanning electron microscopy (SEM) coupled with energy dispersion spectrum (EDS). Visible upconversion (UC) luminescence was measured by exciting the phosphors with 980 nm laser radiation. The dependence of the UC intensity of each emission band of Er³⁺ and Tm³⁺ ions as a function of temperature in the range from 30 to 300 K was monitored. Fluorescence intensity ratios (FIR) of thermally coupled levels (TCL) and non-thermally coupled levels (NTCL) were analysed and verified with appropriate theoretical validation. The absolute (S_A) and relative sensitivities (S_R) were estimated and compared with the reported systems. In the present case of BiLaWO₆: Er³⁺/Tm³⁺/Yb³⁺, S_R (0.43 % K^?1) related to TCL of Er³⁺ UC is found to have maximum sensitivity compared to any of the NTCL combinations at 300 K. From this study we inferred that the S_R values estimated from NTCL are smaller than that of TCL involved in BLW: Er³⁺/Tm³⁺/Yb³⁺ phosphor. The temperature dependent CIE color coordinates were also evaluated in the cryogenic temperature region.     

Er3+ concentration-dependent microstructural and upconversion luminescence process of transparent perfluoride composite glass

Er³⁺-doped transparent perfluoride composite glass (PFCG) containing SrF₂ crystals was obtained by a one-step method. PFCG was observed to maintain the formation of a single SrF₂ crystal phase even when the Er³⁺ doping concentration was as high as 8 mol%. Importantly, Er³⁺ was enriched in the crystalline region, which promoted grain growth. This ensures effective emission of upconversion (UC). Interestingly, green and red UC emissions were found to be tunable in the range of 1–6 mol% Er³⁺ doping, and the UC emission and lifetime started to produce concentration quenching until 6 mol% Er³⁺ doping. To the best of our knowledge, this is the highest quenching concentration of Er³⁺ in composite-glass materials. Moreover, the dominant UC process was systematically analyzed at different doping levels. This research is expected to provide ideal candidate materials and appropriate Er³⁺ concentration doping level guidance in PFCG for the field of UC lasers.