Ultra-broadband of up to 200 nm near-infrared phosphors based on one-site occupation strategy for multipurpose applications in light-emitting diodes

Portable near-infrared (NIR) lighting source stimulates great efforts to exploit NIR phosphor-converted LEDs (pc-LEDs) that push the rapid development of broadband NIR-emitting phosphors. Although Cr³⁺-activated NIR phosphors designed by multisites occupation strategy show significant potential in emission bandwidth, poor spectral stability caused by different thermal quenching behaviors is a brake on practical application due to different local structure around Cr centers. One-site-based NIR phosphors seem to be an effective method to solve aforementioned problem. Herein, we report a type of new ultra-broadband one-site-based NIR-emitting phosphors NaSc_1-xP₂O₇:xCr³⁺ (NSP:xCr³⁺) with emission at 910 nm and full width at half maximum (FWHM) of up to ～200 nm. Their FWHM value exceeds all one-site-based Cr³⁺-activated phosphors and some multiple-sites ones. Structural analysis and low-temperature spectra demonstrate that such impressive broadband NIR emission originates from Cr³⁺ occupying at single octahedral Sc site. At 425 K, integrated emission intensity of NSP:0.04Cr³⁺ phosphor maintains 53.8% of room temperature. A NIR pc-LED prototype is fabricated by using NSP:0.04Cr³⁺ phosphor with a blue LED chip, and its multipurpose applications in non-destructive detection, night vision and analysis of foodstuff are demonstrated. These findings indicate that broadband NSP:0.04Cr³⁺ NIR phosphor enabled by one-site occupation strategy has potential prospect for multipurpose NIR pc-LEDs applications.     

Improvement the near-infrared luminescence properties of double perovskite phosphor La(Mg0.5Sn0.5In0.5Sc0.5)0.5O3:Cr3+ via co-doping Yb3+

In recent years, the broadband near-infrared (NIR) spectroscopy technology has been widely used in the field of nondestructive testing. However, these existing NIR phosphors showed relatively short emission wavelengths, narrower half-maximum full-width (FWHM), and narrower half-peak widths, importantly, few phosphors presented the emission from 950 nm to 1100 nm. In order to solve these problems, the Yb³⁺/Cr³⁺ ions codoped La(Mg_0.5Sn_0.5In_0.5Sc_0.5)_0.5O₃ (LMSIS) was synthesized by the solid-state method, and the emission spectrum of LMSIS:Cr³⁺ can be extended to the NIR long-wave region due to the energy transfer of Yb³⁺ and Cr³⁺, and the thermal stability of the phosphor can be improved due to the inherent temperature stability of the Yb³⁺ f-f transition. The NIR phosphor converted light emitting diodes (pc-LEDs) were fabricated by combining the LMSIS:0.003Cr³⁺, 0.0015Yb³⁺ with blue LED chip, which can be expected to be used in the field of broadband near-infrared non-destructive detection.     

Broadband near-infrared emission enhancement in K2Ga2Sn6O16:Cr3+ phosphor by electron-lattice coupling regulation

Cr³⁺-doped phosphors have recently gained attention for their application in broadband near-infrared phosphor-converted light-emitting diodes (pc-LEDs), but generally exhibit low efficiency. In this work, K₂Ga₂Sn₆O₁₆:Cr³⁺ (KGSO:Cr) phosphor was designed and synthesized. The experimental results show that the Cr³⁺-doped phosphor exhibited broadband emissivity in the range 650-1300 nm, with a full width at half maximum (FWHM) of approximately 220-230 nm excited by a wavelength of 450 nm. With the co-doping of Gd³⁺ ions, the internal quantum efficiency (IQE) of the KGSO:Cr phosphor increased from 34% to 48%. The Gd³⁺ ions acted neither as activators nor sensitizers, but to justify the crystal field environment for efficient Cr³⁺ ions broad emission. The Huang-Rhys factor decreased as the co-doping of Gd³⁺ ions increased, demonstrating that the nonradiative transitions were suppressed. An efficient strategy for enhancing the luminescence properties of Cr³⁺ ions is proposed for the first time. The Gd³⁺–co-doped KGSO:Cr phosphor is a promising candidate for broadband NIR pc-LEDs.     

Broadband deep-red-to-near-infrared emission from Mn2+ in strong crystal-field of nitride MgAlSiN3

Broadband near-infrared (NIR) phosphors have received increasing attention for fabricating phosphor-converted light-emitting diodes (pc-LEDs) as NIR light source. Most of the reported broadband NIR phosphors originate from Cr³⁺ in weak crystal field environments. Herein, we report a luminescent material, MgAlSiN₃:Mn²⁺ with CaAlSiN₃-type structure, demonstrating that broadband deep-red-to-NIR emission can be achieved via doping Mn²⁺ into crystallographic sites with strong crystal field in inorganic solids. This phosphor is synthesized via easy-handle solid-state reaction, and the optimized sample, (Mg_0.93Mn_0.07) AlSiN₃ shows an emission band with peak at ~754 nm, FWHM of 150 nm, and internal quantum efficiency of 70.1%. The photoluminescence intensity can further be enhanced by co-doping Eu²⁺ as sensitizer. This work provides a new strategy for discovering new broadband NIR phosphors using Mn²⁺ in strong crystal field as luminescence center.     

A broadband near-infrared Sc1−x(PO3)3:XCr3+ phosphor with enhanced thermal stability and quantum yield by Yb3+ codoping

Broadband near-infrared (NIR) phosphors converted light-emitting diodes (pc-LEDs) have attracted tremendous attention for their great potential in NIR spectroscopy applications. Herein, we report on the photoluminescence (PL) properties of Cr³⁺-doped Sc(PO₃)₃, which exhibits a broadband NIR emission centered at 900 nm with a full width at half-maximum (FWHM) of 161 nm upon excitation at 480 nm. In terms of the examination of spectroscopic parameters, we find that Cr³⁺ ions occupy a weak crystal field site (Dq/B = 1.94) in the Sc(PO₃)₃ host with a stronger electron–phonon coupling (Huang-Rhys factor, S = 5.5), which results in a serious thermal quenching and a low internal quantum efficiency (IQE). Thermal stability and IQE of phosphors can be substantially enhanced by the introduction of Yb³⁺ ions. In the light of the analysis of excited-state dynamics, we demonstrate that the enhancement mechanism is ascribed to the efficient Cr³⁺→Yb³⁺ energy transfer from the thermal sensitive Cr³⁺ centers to the thermal stable Yb³⁺ emitters. An NIR pc-LED device has been finally fabricated by the combination of a blue-emitting chip and a Cr³⁺/Yb³⁺ codoped Sc(PO₃)₃ phosphor whose potential application for broadband NIR pc-LEDs is also discussed.     

Tuning the luminescence properties of blue and far-red dual emitting Gd2MgTiO6: Bi3+, Cr3+ phosphor for LED plant lamp

Blue and far-red light play a key role in plant growth, so it is necessary to develop blue and far-red dual emitting phosphors. However, the match between phosphors and plant pigments is not satisfactory. In this work, we synthesized a series of blue and far-red dual emission Gd₂MgTiO₆: Bi³⁺, Cr³⁺ (GMTO: Bi³⁺, Cr³⁺) phosphors and discussed the luminescence performance. The blue emission at 430 nm is ascribed to ³P₁ → ¹S₀ transition of Bi³⁺ and the far-red emission is ascribed to ⁴T₂ → ⁴A₂ and ²E → ⁴A₂ transitions of Cr³⁺. Notably, because of the energy competition between Cr³⁺ ions and host materials, the luminescence tuning realized with the content of Cr³⁺ doping. In addition, an energy-transfer performance occurred from Bi³⁺ ions to Cr³⁺ ions and the photoluminescence intensity of Cr³⁺ can be enhanced by Bi³⁺. The pc-LEDs devices were synthesized by GMTO: Bi³⁺, Cr³⁺ phosphor, and ultraviolet (UV) chips. Finally, the emission of GMTO: Bi³⁺, Cr³⁺ phosphor matched well with the absorption spectra of plant pigments which indicated the potential applications in LED plant lamp.     

Broadband emission of single-phase Ca3Sc2Si3O12:Cr3+/Ln3+ (Ln = Nd,Yb, Ce) phosphors for novel solid-state light sources with visible to near-infrared light output

Novel single-component phosphors Ca₃Sc₂Si₃O₁₂:Cr³⁺/Ln³⁺ (CSS:Cr³⁺/Ln³⁺, Ln = Nd, Yb, Ce) with broadband near-infrared (NIR) emissions are synthesized. Their phase structure, photoluminescence properties and energy transfer between Cr³⁺ and Ln³⁺ ions are investigated. In the CSS host, Cr³⁺ ions occupy Sc³⁺ sites with low-field octahedral coordination, and thus show a broadband emission in 700–900 nm under the blue light excitation. Nd³⁺, Yb³⁺ and Ce³⁺ ions substitute Ca²⁺ sites in CSS, where Nd³⁺ and Yb³⁺ ions emit the NIR light in 900–1100 nm and their excitation efficiencies at ∼450 nm are greatly enhanced by utilizing the energy transfer from Cr³⁺ to Nd³⁺/Yb³⁺ ions. Ce³⁺ ions can further enhance the absorption of CSS:Cr³⁺/Ln³⁺ phosphors to the blue light, and at the same time contribute to the visible emission in 480–650 nm. Furthermore, CSS:Cr³⁺/Ln³⁺ phosphors show good thermal stability, and approximately 79% of the initial emission intensity is sustained at 150 °C. A phosphor-converted LED (pc-LED) prototype is fabricated by integrating the as-prepared phosphor CSS:Cr³⁺/Ln³⁺ and the commercial phosphor CaAlSiN₃:Eu²⁺ with the blue LED chip, showing a super broadband emission ranging from 450 to 1100 nm. This finding shows the potential application of CSS:Cr³⁺/Ln³⁺ phosphors in broadband NIR pc-LEDs or super broadband LED sources with visible to NIR light output.     

The hydrothermally synthesis of K3AlF6:Cr3+ NIR phosphor and its performance optimization based on phase control

Phosphor-convert (pc) near-infrared (NIR) LED is the next-generation smart NIR light sources. Thus, NIR phosphors are quickly developed. The K₃Al_1−xF₆:xCr³⁺ (KAF:Cr³⁺) NIR phosphor shows broadband emission from 650 to 900 nm under 430 nm and can be used to fabricate NIR LEDs. In this work, KAF:Cr³⁺ phosphors were prepared by a hydrothermal method for the first time. Morphologies and NIR properties are tuned by controlling the hydrothermal processes. Different from the cubic KAF:Cr³⁺ synthesized by a coprecipitation method, KAF:Cr³⁺ synthesized by the hydrothermal method shows the tetragonal phase. The optimized KAF:3%Cr³⁺ shows an internal quantum efficiency of about 31.4%. A NIR pc-LED device was fabricated by integrating the KAF:3%Cr³⁺ phosphor with a blue LED chip (~450 nm). The output power of NIR light is about 5.5 mW driven at 150 mA.     

Efficient near-infrared pyroxene phosphor LiInGe2O6:Cr3+ for NIR spectroscopy application

Broadband near-infrared phosphors are essential to realize nondestructive analysis in food industry and biomedical areas. Efficient long-wavelength (>830 nm) phosphors are strongly desired for practical applications. Herein, we demonstrate an efficient broadband NIR phosphor LiInGe₂O₆:Cr³⁺, which exhibits a broad NIR emission peaking at ~880 nm with a full width at half maximum of 172 nm upon 460 nm excitation. The internal/external quantum efficiencies of LiInGe₂O₆:Cr³⁺ are measured to be 81.2% and 39.8%, respectively. The absorption of the phosphor matches well with commercial blue LEDs. Using the fabricated phosphor converted LED illuminating human palm, distribution of blood vessels can be clearly recognized under a NIR camera. These results indicate that LiInGe₂O₆:Cr³⁺ is a promising candidate to be used in future non-destructive biological applications.     

The co-optimization of efficiency and emission bandwidth in GSAGG:Cr3+ NIR ceramic phosphors

The NIR phosphor-converted light-emitting diode (NIR pc-LED) is a new near-infrared light source that has been widely studied. Among various NIR phosphors, Cr³⁺ doped gadolinium aluminum gallium garnet (GAGG:Cr³⁺) ceramic phosphor has shown great potential due to its ultra-high efficiency and thermal stability. Despite its capabilities, its detection range may be limited due to a relatively narrow emission bandwidth. To make the GAGG:Cr³⁺ ceramic phosphors achieve both high efficiency and broadband emission, a series of Gd₃Al_2-x-ySc_xGa₃O₁₂:yCr³⁺ (GASGG:Cr³⁺) ceramic phosphors were prepared. Thanks to the decrease of crystal field strength with the doping of Sc³⁺, the full width at half maximum (FWHM) of GASGG:Cr³⁺ ceramic phosphors were extended from 84 nm to 117 nm, and the emission peak exhibited a red-shift of 46 nm. Meanwhile, it still retained extremely high external quantum efficiency (EQE = 47%) and excellent thermal stability (90.7%@150 °C). Then, a NIR pc-LED prototype device was fabricated by combining GASGG:Cr³⁺ ceramic phosphor with a blue LED chip. The NIR light output power and the photoelectric conversion efficiency of this device achieved 646 mW and 19.2%, respectively. Finally, the application effect in night vision and venography of this prototype device was demonstrated.     

Broadband near-infrared double-perovskite phosphor Sr2ScTaO6:Cr3+, Yb3+ for NIR pc-LED applications

The broadband near-infrared (NIR) phosphor converted light emitting diode (NIR pc-LED) has garnered unprecedented attention due to its crucial role in NIR applications. However, there remains a scarcity of efficient broadband NIR luminescence materials capable of emitting NIR light with wavelengths greater than 800 nm. This study reports the synthesis, crystal structure and photoluminescence (PL) properties for double perovskite Sr₂ScTaO₆:Cr³⁺ phosphors which exhibit a broadband NIR emission in the 650–1250 nm range, peaking at∼815 nm with the full width at half maximum (FWHM) of 161 nm. The observed broadband emission arises from two distinct Cr³⁺ centers, namely Sc³⁺ and Ta⁵⁺ octahedral sites within the Sr₂ScTaO₆ structure, as demonstrated by luminescence and decay kinetic analysis. A significant enhancement of the thermal stability and a remarkable broadening of the FWHM (from 161 to 275 nm) are achieved by employing Yb³⁺ co-doping strategy. The efficient energy transfer from Cr³⁺ to Yb³⁺ was confirmed through emission and excitation spectra, as well as luminescence decay measurements. Finally, Sr₂ScTaO₆:Cr³⁺-Yb³⁺ phosphor was integrated with a 470 nm blue LED chip to fabricate a NIR pc-LED device, and its potential application in night vision was evaluated.     

Site occupancy and enhanced luminescence of broadband NIR gallogermanate phosphors by energy transfer

Super broadband near-infrared (NIR) La₃Ga₅GeO₁₄(LGGO): Cr³⁺ phosphor is in urgent needs for food testing. Unfortunately, it suffers from poor luminescence intensity in applications. Herein, the enhanced NIR luminescence performance can be realized in LGGO: Pr³⁺, Cr³⁺. The preferential crystallographic site of Cr³⁺ is validated on the basis of EPR spectrum, Rietveld refinement, and the first-principles DFT calculations. It is of great importance that the as-prepared phosphors can be excited by blue light (460 nm), which is beneficial to the application of blue-pumped LEDs. The critical distance of Pr³⁺ in LGGO host has been calculated by concentration-quenching method. For co-doped sample, it is observed that Cr³⁺ luminescence intensity enhancement by a factor of 3 can be achieved by doping Pr³⁺ owing to the energy transfer from Pr³⁺ to Cr³⁺. In addition, the introduction of Pr³⁺ can also improve the Cr³⁺ luminescence intensity at elevated temperature. Furthermore, using the optimized phosphor, a blue-based NIR phosphor-converted LEDs (NIR pc- LEDs) is fabricated, the forward voltage and the intensity of LED hardly change after thermal aging for 500 hours under high temperature/ high humidity condition, indicating its great reliability for NIR pc-LEDs. Therefore, LGGO:Pr³⁺, Cr³⁺ has great potential to serve as an attractive candidate in the application of blue light-excited NIR pc-LEDs in view of its capability for blue to enhanced broadband NIR conversion.     

Luminescent properties and LED Application of Broadband Near-Infrared Emitting NaInGe2O6: Cr3+ phosphors

A NIR-emitting Cr³⁺-activated phosphors (NaInGe₂O₆: Cr³⁺) covering whole NIR-I region (700–1200 nm) were successfully designed and prepared via solid-state reaction. XRD and Rietveld refinement verified that the octahedral In³⁺ site is the preferred site of Cr³⁺ substitution in NaInGe₂O₆ structure. The synthesized NaInGe₂O₆: Cr³⁺ phosphors exhibit two strong absorption bands at 480 and 700 nm, and show a mountain-like single-band emission at 900 nm with FWHM = 175 nm. The crystal field parameters are calculated using steady-state spectral data, in which a low Dq/B value of 1.89 is obtained and results in this broadband NIR emission. NaInGe₂O₆: Cr³⁺ exhibits good emission thermal stability, i.e. 55 % of room temperature intensity at 373 K. Besides, an efficient NIR pc-LED is fabricated and shows NIR output of 25.2 mW@120 mA. This broadband NaInGe₂O₆: Cr³⁺ NIR phosphor could be merged into pc-LED package for hand-held spectrometers, security cameras and vivo biomarkers.     

The ultra-wideband near-infrared luminescence properties and applications of K2SrGe8O18:Cr3+ phosphor

The near-infrared (NIR) light sources are fascinating in real-time nondestructive examination applications. Given that chemical bonds in organic substances (such as C–H, O–H and N–H) have extensive absorption and reflection of light in the NIR region, the emission spectrum of the NIR light sources should be as broad as possible. In this work, ultra-wideband K₂SrGe₈O₁₈ (KSGO):Cr³⁺ NIR-emitting phosphors with a 650–1200 nm emission span are developed. Structural analysis combined with electron paramagnetic resonance (EPR), photoluminescence (PL) spectra, time-resolved spectrum (TRES) and temperature-dependent PL spectra confirm that the super broadband emission with full width at half-maximum (FWHM) of 214 nm originates from the double Cr³⁺ luminescence centers occupying different [GeO₆] octahedra. Li⁺ ion as charge compensator is introduced to balance the negative charge induced by the un-equivalent replacement of Cr³⁺ for Ge⁴⁺, and the PL intensity and thermal stability are greatly enhanced. The NIR phosphor-converted luminescent diodes (pc-LEDs) prepared by combining optimized KSGO:0.10Cr³⁺, 0.07Li⁺ samples with 460 nm LED chips demonstrate their application in night vision. The measured absorption spectra of hemoglobin, water, ethyl alcohol and peanut oil illuminated by the as-prepared KSGO:0.10Cr³⁺, 0.07Li⁺ phosphors indicate nondestructive analysis in the areas of food safety.     

Energy transfer realizes efficient NIR emitting Ca2ScTaO6:Cr3+, Yb3+ perovskite-structured phosphors

Stable and efficient broadband near-infrared (NIR) emitting phosphors are vital for the next-generation NIR sources. However, it still remains challenging to construct such phosphors, particularly those with a NIR-II window. In this work, using the Cr³⁺-Yb³⁺ energy transfer (ET) strategy, the as-synthesized Ca₂ScTaO₆:Cr³⁺, Yb³⁺ phosphor retains 86.2% of the initial luminescence intensity of Yb³⁺ at 373 K with characteristic emissions of both activators ranging from 700 nm to 1200 nm. The occupation of Cr³⁺ into both Ta⁵⁺ and Sc³⁺ sites is confirmed by X-ray diffraction, time-resolved emission spectrum, and crystal structure. The efficient ET from Cr³⁺ to Yb³⁺ is revealed by the diffuse reflection spectrum, steady-state and transient fluorescence. As a result, it contributes to the excellent performance of the phosphor. Based on the optimized phosphor, a NIR light-emitting diode is fabricated and demonstrated its advantage in imaging and potential application in information encryption. The result highlights ET as a robust strategy to construct efficient NIR phosphor.     

A novel extra-broadband visible-NIR phosphor doped with Ce3+ and Cr3+ towards multifunctional advanced applications

Phosphors that can emit broadband light from visible to near infrared (NIR) may have applications in the fields like white-light illumination and NIR vessel visualization, the investigation on single phase extra-broadband visible-NIR emitting phosphor is of great significance. Herein, an extra-broadband phosphor with tunable visible-NIR emission from 500 nm to longer than 900 nm (bandwidth >400 nm) was successfully prepared, which originates from the emission of Ce³⁺ (peaking at 573 nm), Cr³⁺ (peaking at 750 nm) and energy transfer from Ce³⁺ to Cr³⁺ in Y₃MgAl₃SiO₁₂ garnet. The influences of Ce³⁺/Cr³⁺ doping concentration and working temperature were discussed systematically by luminescence spectra and decay curves. A visible-NIR full-spectrum phosphor-converted light emitting diode (pc-LED) fabricated with a 460 nm LED chip and Y₃MgAl₃SiO₁₂:0.03Ce³⁺, 0.01Cr³⁺ can generate bright white light and broadband NIR light simultaneously. The co-doping of Ce³⁺ can perfectly compensate for the missing spectrum of Cr³⁺ in the visible region, thanks to the extra-broadband emission of Ce³⁺ in visible region and Cr³⁺ in NIR region, multifunctional advanced applications may be realized for the prepared phosphors.     

LiBAlF6:Cr3+ (B = Ca,Sr) fluoride phosphors with ultra-broad near-infrared emission for NIR pc-LEDs

Compared with oxide-based NIR phosphors, fluoride phosphors have received great attention recently due to their good thermal resistance and high photoelectric efficiency. In this work, novel LiBAlF₆:Cr³⁺ (B = Ca, Sr) with low phonon energy and relatively weak electron-phonon coupling were synthesized through a facile hydrothermal approach. Benefiting from low Dq/B, an ultra-broad NIR emission extending from 650 nm to 1100 nm can be achieved in these phosphors under excitation of blue light. Among them, LiSrAlF₆:Cr³⁺ presents a FWHM of 155 nm. At 423 K, LiCaAl_0.4F₆: 0.6Cr³⁺ and LiSrAl_0.4F₆: 0.6Cr³⁺ maintain 66.63% and 55.47% of their initial intensities, respectively. Better thermal stability of LiCaAlF₆: Cr³⁺ could be attributed to the broad band gap and weak electron-phonon coupling effect. Photoelectric conversion efficiencies of 5.002% and 5.468% at 300 mA could be obtained for NIR pc-LEDs packaged with LiCaAl_0.4F₆: 0.6Cr³⁺ and LiSrAl_0.4F₆: 0.6Cr³⁺, respectively. A slightly internal bruise inside apple and water level behind trademark in bottle could be clearly detected, revealing that LiBAlF₆:Cr³⁺ (B = Ca, Sr) phosphors have great application potential in infrared inspection.     

A novel far-red phosphors Li2ZnTi3O8:Cr3+ for indoor plant cultivation:Synthesis and luminescence properties

A novel far-red phosphors Li₂ZnTi₃O₈:Cr³⁺ were successfully synthesized via the conventional solid-state method. The structural characteristics, luminescence properties and concentration quenching of the Li₂ZnTi₃O₈:Cr³⁺ phosphors were investigated systematically. Under the excitation at 360 nm and 468 nm, the Li₂ZnTi₃O₈:Cr³⁺ phosphors displays the emission spectra in the range from 600 nm to 850 nm. The far-red emission centered at 735 nm was attributed to the spin-forbidden ²E→⁴A₂ transition of Cr³⁺ ions. The research results of this paper indicate that the phosphors Li₂ZnTi₃O₈:Cr³⁺ has prospective applications in indoor plant cultivation.     

Luminescence enhancement of Cr3+ doped garnet phosphor for high-performance LED towards smart NIR light source

Cr³⁺ doped phosphor shows great potential for near-infrared (NIR) light-emitting diodes (LED), but it suffers from low quantum efficiency and poor thermal stability. Herein, a novel Cr³⁺ doped broadband NIR garnet Ca₃Sc₂Ge₃O₁₂ phosphor was developed. The multisite structure of the emission band is investigated by site-selective spectroscopy and is attributed to the octahedral Cr³⁺ perturbed by defects. Moreover, we propose different strategies to enhance the luminescence of the phosphor, including enhancement of crystallinity and elimination of defects. Compared with the initial sample, the emission intensity of the optimized phosphor is improved for 8.6 times. The optimal Ca₃Sc₂Ge₃O₁₂: 0.06Cr³⁺ phosphor exhibits excellent thermal stability. At 423 K, the integral emission intensity of the optimal sample remains 94.7% of that at room temperature. Finally, high-performance NIR LED was fabricated using a blue LED and the title phosphor. The packaged LED lamp has high radiance (109.3 mW@300 mA) and photoelectric efficiency (15.96%@40 mA). Our study not only provides a boulevard for enhancing the luminescence of Cr doped NIR phosphor, but also gives a new perspective for understanding the multisite luminescence of Cr³⁺ in garnet host.     

Design of a narrow-band blue-emitting Rb2Ba3(P2O7)2:Eu2+ phosphor with low thermal quenching for plant growth LEDs

Phosphor-converted light-emitting diodes (pc-LEDs) are commonly used to regulate the light environment to control the growth rates and improve the production efficiency of plant. Among them, the exploration of blue-emitting phosphors with high efficiency, low thermal quenching and excellent spectrum resemblance matching with the plant response spectrum is still challenging. Herein, a narrow-band blue-emitting Rb₂Ba₃(P₂O₇)₂:Eu²⁺ phosphor with high color purity of 93.4% has been developed. Under 345 nm excitation, it exhibits a blue emission band centered at 413 nm with a full width at half-maximum (FWHM) of 36 nm, and the emission spectrum of Rb₂Ba₃(P₂O₇)₂:0.060Eu²⁺ sample shows 85.7% spectrum resemblance with the absorption spectrum of chlorophyll-a in the blue region from 400 to 500 nm. In addition, the temperature-dependent emission spectra demonstrate that the Rb₂Ba₃(P₂O₇)₂:0.060Eu²⁺ phosphor has good thermal stability and small chromaticity shift, with the emission intensity dropping to 72.5% at 423 K of the initial intensity at 298 K and a chromaticity shift of 38 × 10^-3 at 498 K. All results suggest that the blue-emitting Rb₂Ba₃(P₂O₇)₂:Eu²⁺ phosphor has potential application in plant growth LEDs.