Improved synthesis of a branched poly(ethylene imine)‐modified cellulose‐based adsorbent for removal and recovery of Cu(II) from aqueous solution

This study focuses on an improved synthesis of a branched poly (ethylene imine) (PEI)‐modified cellulose‐based adsorbent (Cell‐g‐PGMA‐PEI). We aim to improve the adsorbent capacity by reducing side reaction of epoxide ring opening during graft copolymerization of glycidyl methacrylate (GMA) onto cellulose which increases the content of epoxy groups, anchors to immobilize branched PEI moieties. FTIR spectra provided the evidence of successful graft copolymerization of GMA onto cellulose initiated by benzoyl peroxide (BPO) and modification with PEI. The amount of epoxy groups of Cell‐g‐PGMA was 4.35 mmol g^?1 by epoxy titration. Subsequently, the adsorption behavior of Cu(II) on cell‐g‐PGMA‐PEI in aqueous solution has been investigated. The data from the adsorption kinetic experiments agreed well with pseudo‐second‐order model. The adsorption isotherms can be interpreted by the Langmuir model with the maximum adsorption capacity of 102 mg g^?1 which was largely improved compared with the similar adsorbent reported. The dynamic adsorption capacity obtained from the column tests was 119 mg g^?1 and the adsorbent could be regenerated by HCl of 0.1 mol L^?1. Results indicate that the novel pathway for the synthesis of Cell‐g‐PGMA‐PEI exhibits significant potential to improve the performance of adsorbents in removal and recovery of Cu(II) from aqueous solution. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation and Characterization of Charred Xanthated Sugarcane Bagasse for the Separation of Heavy Metals From Aqueous Solutions

Introduction of xanthate group onto sugarcane (Saccharum officinarum) bagasse has been investigated for the removal of cadmium, lead, nickel, zinc, and copper from their aqueous media. The charred xanthated sugarcane bagasse (CXSB) was found to have significant adsorption capacity which is more than that of various bio-sorbents mentioned in the available literatures. The newly developed bio-sorbent was characterized by SEM, FTIR, TGA/DTA, and elemental analysis. The velocity of sorption of the tested metals was fast, reaching equilibrium within 40 min. The maximum loading capacities was found to be 225 for Cd(II), 318 for Pb(II), 144 for Ni(II), 164 for Zn(II), and 178 for Cu(II) mg g^?1, respectively. The fast kinetics results and high adsorption capacity indicated that CXSB can be applied as the selective adsorbent for the treatment of heavy metal ions from aqueous solutions.     

蔗渣闪爆处理及其黄原酸化物的制备和应用

采用热蒸汽适度闪爆及稀碱洗涤等预处理技术对蔗渣进行纯化和活化,利用处理后的蔗渣纤维素合成纤维素基黄原酸酯,对其在水处理中的应用进行了研究。研究优化了闪爆处理的工艺条件,并采用IR、SEM和化学分析技术对闪爆前后蔗渣纤维的形态、结构、a-纤维素的含量进行了分析,对处理前后的蔗渣纤维的碱化和黄原酸化合成条件进行了优化。结果表明,闪爆预处理技术是一种便宜、迅速、无污染的技术,蔗渣纤维素基黄原酸酯对含金属离子的污水有良好的处理效果。     

Cellulose-lanthanum hydroxide nanocomposite as a selective marker for detection of toxic copper

In this current report, a simple, reliable, and rapid method based on modifying the cellulose surface by doping it with different percentages of lanthanum hydroxide (i.e., 1% La(OH)₃-cellulose (LC), 5% La(OH)₃-cellulose (LC2), and 10% La(OH)₃-cellulose (LC3)) was proposed as a selective marker for detection of copper (Cu(II)) in aqueous medium. Surface properties of the newly modified cellulose phases were confirmed by Fourier transform infrared spectroscopy, field emission scanning electron microscope, energy dispersive X-ray spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopic analysis. The effect of pH on the adsorption of modified cellulose phases for Cu(II) was evaluated, and LC3 was found to be the most selective for Cu(II) at pH 6.0. Other parameters, influencing the maximum uptake of Cu(II) on LC3, were also investigated for a deeper mechanistic understanding of the adsorption phenomena. Results showed that the adsorption capacity for Cu(II) was improved by 211% on the LC3 phase as compared to diethylaminoethyl cellulose phase after only 2 h contact time. Adsorption isotherm data established that the adsorption process nature was monolayer with a homogeneous adsorbent surface. Results displayed that the adsorption of Cu(II) onto the LC3 phase obeyed a pseudo-second-order kinetic model. Selectivity studies toward eight metal ions, i.e., Cd(II), Co(II), Cr(III), Cr(VI), Cu(II), Fe(III), Ni(II), and Zn(II), were further performed at the optimized pH value. Based on the selectivity study, it was found that Cu(II) is highly selective toward the LC3 phase. Moreover, the efficiency of the proposed method was supported by implementing it to real environmental water samples with adequate results.     

机械活化甘蔗渣与丙烯[BF]酸(钠)的接枝共聚反应

采用搅拌球磨对甘蔗渣进行机械活化,以不同活化时间的甘蔗渣为原料,过硫酸铵和亚硫酸钠为引发剂,在水溶液中与部分中和的丙烯酸进行接枝共聚反应。以接枝率和接枝效率为评价指标,考察了活化时间、丙烯酸与甘蔗渣的用量比、反应时间和反应温度等因素对接枝反应的影响。并采用SEM、FT-IR对甘蔗渣和产物进行表征。结果表明：机械活化明显强化了甘蔗渣与丙烯酸的接枝共聚反应,接枝率和接枝效率随着活化时间的延长而增大,主要是由于机械活化破坏了甘蔗渣中木质素对纤维素的包裹作用,降低纤维素的结晶度,提高了其反应活性。以活化1.5 h的甘蔗渣为原料进行接枝共聚反应,在反应时间为3 h、丙烯酸（体积,ml）与甘蔗渣（质量,g）的用量比为6、反应温度为60℃的条件下,制得接枝率和接枝效率分别为165.29%和82.70%的接枝共聚产物。     

Bifunctional cellulose derivatives for the removal of heavy‐metal ions and phenols: Synthesis and adsorption studies

In this article, we report a study of the design and synthesis of a bifunctional cellulose derivative on the removal of phenols and heavy‐metal ions in wastewater treatment. A radical polymerization was performed in an ionic liquid, 1‐allyl‐3‐methylimidazolium chloride, to graft two monomers, butyl methacrylate and 4‐vinyl pyridine, on the backbone of cellulose. The effects of the five reaction conditions on the yield of final products were evaluated. The grafted celluloses were characterized by means of Fourier transform infrared spectroscopy, scanning electron microscopy, and thermogravimetric analysis. Adsorption experiments were carried out on the cellulose‐g‐poly(butyl methacrylate‐co‐4‐vinyl pyridine) to evaluate the capacity of the removal of 2,4‐dichlorophenol (2,4‐DCP) and Cu(II) in water. The adsorption isotherms were measured at five temperatures and interpreted by a Langmuir model of adsorption. The thermodynamics of the adsorption suggested that the binding process was mildly exothermic for Cu(II) and endothermic for 2,4‐DCP. Kinetic studies were interpreted with a pseudo‐second‐order adsorption model. The process of the adsorption of 2,4‐DCP could be described overall by the model, whereas the adsorption of Cu(II) involved two processes. This was due to adsorption both on the surface and inside the adsorbent. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41830.     

Heavy metal ion removal by amidoximated bagasse

Amidoximated bagasse (Am‐B) was prepared by treating sugarcane bagasse fibers with acrylonitrile in the presence of sodium hydroxide followed by aqueous hydroxyl amine. Adsorption of some heavy metal ions, namely, Cu(II), Hg(II), Ni(II), Cr(III), and Pb(II) on the prepared Am‐B at different metal ion concentration, intervals, and temperatures was studied. Also, the selectivity of the prepared Am‐B toward adsorption of the aforementioned metal ions in an equimolar mixture was studied. The effect of regeneration of Am‐B using ethylenediamine tetraacetic acid disodium salt (EDTA), up to five times, on its adsorption capacity of the aforementioned metal ions was investigated. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 666–670, 2003     

Facile preparation of magnetic chitosan modified with thiosemicarbazide for adsorption of copper ions from aqueous solution

In this study, magnetic chitosan modified with thiosemicarbazide (TSC‐Fe₃O₄/CTS) was facilely synthesized with glutaraldehyde as the crosslinker, and its application for removal of Cu(II) ions was investigated. The as‐prepared TSC‐Fe₃O₄/CTS was characterized by Fourier transform infrared spectroscopy (FTIR), X‐ray powder diffraction (XRD), and scanning electron microscopy (SEM). The results showed that TSC‐Fe₃O₄/CTS has high adsorption capacity and selectivity towards Cu(II) ions. Adsorption experiments were carried out with different parameters such as pH, solution temperature, contact time and initial concentration of Cu(II) ions. The adsorption process was better described by the pseudo‐second‐order model. The sorption equilibrium data was fitted well with the Langmuir isotherm model and the maximum adsorption capacity toward Cu(II) ions was 256.62 mg/g. The thermodynamic parameters indicated that the adsorption process of Cu(II) ions was exothermic spontaneous reaction. Moreover, this adsorbent showed excellent reusability and the adsorption property remained stable after five cycles. This adsorbent is believed to be one of the promising and favorable adsorbent for the removal of Cu(II) ions from aqueous solution. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44528.     

Chitosan functionalized with 2[-bis-(pyridylmethyl) aminomethyl]4-methyl-6-formyl-phenol: equilibrium and kinetics of copper (II) adsorption

The complexation agent 2[-bis-(pyridylmethyl) aminomethyl]-4-methyl-6-formyl-phenol (HL) was immobilized in chitosan in order to obtain a new adsorbent material to be employed in studies on adsorption and pre-concentration of Cu(II). The chitosan modified by the complexation agent was characterized by infrared spectroscopy, DSC and TGA. The studies were conducted as a function of the pH of the medium and the mechanism of Cu(II) adsorption in the solid phase was analyzed utilizing several kinetic models. The parameters for the adsorption of Cu(II) ions by chitosan-HL were determined with a Langmuir isotherm, the maximum saturation capacity of the monolayer being 109.4 mg of Cu(II) per gram of polymer. Electron paramagnetic resonance spectroscopy revealed that Cu^II ions coordinate to the donor atoms of the HL ligand anchored to the surface of the polymer forming a stable chelate complex in the solid state.     

Application of succinylated sugarcane bagasse as adsorbent to remove methylene blue and gentian violet from aqueous solutions - Kinetic and equilibrium studies

In a previous work, succinylated sugarcane bagasse (SCB 2) was prepared from sugarcane bagasse (B) using succinic anhydride as modifying agent. In this work the adsorption of cationic dyes onto SCB 2 from aqueous solutions was investigated. Methylene blue, MB, and gentian violet, GV, were selected as adsorbates. The capacity of SCB 2 to adsorb MB and GV from aqueous single dye solutions was evaluated at different contact times, pH, and initial adsorbent concentration. According to the obtained results, the adsorption processes could be described by the pseudo-second-order kinetic model. Adsorption isotherms were well fitted by Langmuir model. Maximum adsorption capacities for MB and GV onto SCB 2 were found to be 478.5 and 1273.2 mg/g, respectively.     

一种多响应性纳米凝胶用于盐酸阿霉素的释放

以甘蔗渣为原料，用HNO3/H3PO4-NaNO2混合体系氧化甘蔗渣纤维素得到单羧基纤维素，然后在交联剂胱胺双丙烯酰胺（CBA）存在下，甲基丙烯酸酐修饰的单羧基甘蔗渣纤维素（MAMC-SBC）和N-异丙基丙烯酰胺（NIPAM）在水相中通过原位自由基共聚反应，得到具有氧化还原、pH和热响应性的纳米凝胶。通过FTIR、1H NMR、SEM和高精度粒度分析仪对纳米凝胶的结构进行表征。结果表明，纳米凝胶是粒径分布均一的微球，在溶胀状态下平均粒度为183± 2 nm。盐酸阿霉素（DOX）作为模型药物被有效地装载到纳米凝胶中，药物载药效率高达82.7 ％。结果发现，通过还原剂、pH和温度及其它们之间的协同效应可以精准地控制药物的释放。     

Lightweight hydrophobic cellulose foam material with low density and high porosity applications in Cu (II) adsorption

Cellulose foam, renowned for its lightweight properties and exceptional adsorption capacity, has emerged as a significant material of interest. In our study, a distinct functionalized cellulose foam adsorbent was developed using N,N-methylenebisacrylamide (MBA) as a cross-linker. This foam was further chemically tailored with 3-aminopropyltriethoxysilane (APTES) and tannic acid (TA) to optimize its affinity for Cu (II). Utilizing a green and efficient procedure at ambient temperature, MBA was directly crosslinked with MCC sol, the resultant foam features a distinguished three-dimensional, multi-walled porous configuration, marked by a strikingly low average density of 0.0306 g/cm³ and an impressive average porosity surpassing 97%. Subsequently, more amino and oxygen-containing groups were introduced by simple impregnation. The rich functional groups and unique structure enabled the adsorption of Cu (II) up to 93 mg/g, demonstrating an increasing trend in line with rising Cu (II) concentrations. Furthermore, this composite cellulose foam displayed commendable hydrophobic characteristics, evident from a hydrophobic angle surpassing 120°. From both environmental and economic perspectives, this chemically-modified cellulose material epitomizes an ideal adsorbent, showcasing unparalleled adsorption capacity coupled with robust chemical and structural integrity. As such, it presents a viable option for the efficient sequestration of Cu (II) in wastewater treatments.     

季铵盐纤维素对苯胺废水的吸附行为研究

利用柚子皮纤维素为载体制成一种新型吸附剂季铵盐纤维素,对苯胺进行静态吸附,探讨了其吸附机理。结果表明:合成的季铵盐纤维素对苯胺有较好的吸附效果,吸附平衡遵守Langmuire和Freundlich方程,吸附剂对苯胺的吸附速率符合拟二级反应动力学,吸附反应的吉布斯函数变、焓变、熵变均为负值,说明该吸附反应属于自发进行的放热反应,反应容易进行,并很快达到吸附平衡。     

Dithiooxamide-Immobilized Microalgal Residue for the Selective Recovery of Pd(II) and Pt(IV)

Microalgal residue was chemically modified by immobilizing a functional group of dithiooxamide to prepare a novel type of adsorbent. This adsorbent exhibited high adsorption affinity and selectivity for Pd(II) and Pt(IV) whereas the adsorption of coexisting base metal ions was negligible. From the adsorption isotherms, this adsorbent was found to exhibit remarkably high adsorption capacity. The thermodynamic parameters indicated that the adsorption is governed by an endothermic reaction. The effective separation of Pd(II) and Pt(IV) from Cu(II) was confirmed also by a dynamic adsorption test. The effectiveness of elution of adsorbed Pd(II) and Pt(IV) was 85% and 96%, respectively.     

Preparation,characterization, and behavior of cellulose–titanium(IV) oxide modified with organosilicone

Cellulose–titanium(IV) oxide modified with organosilicone (CTSN) was prepared by a reaction of cellulose powder with titanic chloride, followed by a reaction with 4‐aza‐6‐aminohexyl triethoxysilane, and was characterized by infrared spectroscopy, scanning electron microscopy (SEM), and thermogravimetric analysis. An SEM image of titanium(IV) oxide‐coated cellulose and a Ti mapping image showed that titanium oxide was well dispersed on the cellulose surface. Titanium and silicon mapping images of CTSN, obtained with SEM, indicated that both oxides were uniformly dispersed on the cellulose surface. The atomic ratio of Ti to Si was obtained with X‐ray energy spectral composition analysis. The adsorption behavior of CTSN toward Hg(II), Cu(II), Pb(II), Fe(III), and Cr(III) ions in aqueous solutions was determined. The adsorption behavior of CTSN toward human serum protein was preliminarily examined. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 61–66, 2002; DOI 10.1002/app.10188     

Removal of copper ions from aqueous solutions by adsorption onto wheat straw cellulose‐based polymeric composites

The wheat straw cellulose‐based hydrogels were synthesized by graft copolymerization followed by semi‐interpenetrating network technology. The prepared hydrogels were characterized through various methods including Fourier transform infrared spectra, scanning electron microscope, thermogravimetric analysis, and X‐ray photoelectron spectroscopy. Batch adsorption experiments were carried out to investigate the adsorption performances of hydrogels toward Cu(II) ions. The results suggested that the introduction of semi‐interpenetrating network polymers, sodium alginate and poly(vinyl alcohol), could greatly enhance the adsorption property of hydrogels. And the wheat straw cellulose‐g‐poly(potassium acrylate)/sodium alginate hydrogel showed a highest Cu(II) ions adsorption capacity of 130 mg/g. The equilibrium isotherm and adsorption kinetics were also studied. Besides, the mass transfer coefficients and the thermodynamics of Cu(II) ions adsorption were also probed. Finally, the X‐ray photoelectron spectroscopy analysis further demonstrated that the Cu(II) ions adsorption was mainly via complexation reaction of ? NH₂ and O‐containing groups in hydrogels. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46680.     

拟薄水铝石负载PEI/AMP吸附CO2性能

用富含胺基的物质对多孔材料进行修饰可以得到高CO₂吸附量的吸附剂。采用浸渍法将聚乙烯亚胺(PEI)和2-氨基-2-甲基-1-丙醇(AMP)负载在拟薄水铝石上,考察了CO₂压力、胺类物质负载量等对吸附性能的影响。采用低温N₂吸附/脱附法(BET)、扫描电镜(SEM)、傅里叶变换红外线光谱分析仪(FTIR)等手段表征了吸附剂的结构特征及其物理性质,并使用重量法微天平实验装置对吸附剂的性能进行了评价。实验结果表明,当温度恒定为50℃,压力小于1 MPa时,负载PEI的吸附剂最高的CO₂吸附量为77.53 mg CO₂·(g吸附剂)^-1,最佳负载量为85%;压力大于1 MPa时,负载PEI的吸附剂最高的CO₂吸附量为123.79 mg CO₂·(g吸附剂)^-1,最佳负载量为10%。负载AMP的吸附剂最高的CO₂吸附量为128.01 mg CO₂·(g吸附剂)^-1,最佳负载量为85%。CO₂吸附稳定性实验表明,吸附剂对CO₂的吸附性能稳定。     

丙酮酸改性壳聚糖对金属离子的吸附性能研究

丙酮酸经Schiff碱反应对壳聚糖进行修饰 ,合成了高取代的水溶性丙酮酸缩壳聚糖 (PCTS) ,研究了PCTS、SCTS(水杨醛改性壳聚糖 )、CTS(壳聚糖 )对Cu(Ⅱ )、Zn(Ⅱ )、Co(Ⅱ )的静态吸附性能 ,并采用正交实验法考察了金属离子浓度、介质酸度、吸附量和吸附时间对吸附剂去除金属离子能力的影响。结果表明 ,PCTS的吸附性能优于SCTS与CTS ,对Cu(Ⅱ )、Zn(Ⅱ )、Co(Ⅱ )的吸附容量 (pH =7 0 )分别为 2 79 56、1 96 63、70 2 1mg/g ,金属离子浓度、介质酸度对吸附性能影响大 ,而吸附剂用量、吸附时间对吸附性能影响较小。     

Batch Removal of Crystal Violet from Aqueous Solution by H2SO4 Modified Sugarcane Bagasse: Equilibrium,Kinetic, and Thermodynamic Profile

Batch adsorption studies were carried out using H₂SO₄ modified sugarcane bagasse (HMSB) for the removal of hazardous Crystal Violet (CV) dye from aqueous solutions. The effects of initial solution pH, adsorbent dose, and temperature on the adsorption process were investigated. The Langmuir isotherm model well described the equilibrium dye uptake while the pseudo-second-order kinetic model showed good agreement with the experimental kinetic data. Gibb's free energy change (ΔG⁰) was spontaneous for all interactions, and the adsorption process exhibited endothermic enthalpy values. Results suggest that HMSB is an effective adsorbent for the removal of CV from wastewater.     

Studies on the composites of cellulose triacetate (prepared from sugar cane pulp) and gelatin

Sugarcane waste (bagasse) which is hitherto discarded as a waste at sugarcane parlors and jaggery units was recovered and cellulose triacetate (CTA) was prepared from the same, after isolation of cellulose. Using this CTA, CTA–gelatin composites were prepared. The materials prepared (i.e., sugarcane cellulose, CTA, CTA–gelatin composites) were characterized for their mechanical properties, water absorption capacity, infrared spectroscopy, and scanning electron microscopy. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 847–853, 2001