Roles of doping ions in persistent luminescence of SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript>: Eu<Superscript>2+</Superscript>,<Emphasis Type="Italic">RE</Emphasis><Superscript>3+</Superscript> phosphors

The polycrystalline Eu²⁺ and Dy³⁺ codoped strontium aluminates SrAl₂O₄: Eu²⁺,Dy³⁺ were prepared by a solid-state reaction. The UV-excited photoluminescence, persistent luminescence, and thermoluminescence of the SrAl₂O₄: Eu²⁺,Dy³⁺ phosphors with different compositions and ion doping was studied and compared. The results showed that the Eu²⁺ ion doped in SrAl₂O₄: Eu²⁺,Dy³⁺ phosphors is not only the UV-excited luminescent center but also the persistent luminescent center. The Dy³⁺ ion introduced into SrAl₂O₄: Eu²⁺ crystal matrix can hardly yield any luminescence under UV excitation but acts as an electron trap with a suitable depth for persistent luminescence. The Dy³⁺ codoping would effectively enhance the persistent luminescence and thermoluminescence. Different codoping RE ³⁺ ions have a different effect on persistent luminescence. Only the RE ³⁺ ions (for example, Dy³⁺ and Nd³⁺), which have suitable optical electronegativity, can form suitable electron traps and effectively improve the persistent luminescence of SrAl₂O₄: Eu²⁺. Based on the above observations, a persistent luminescence mechanism, electron transfer model, was proposed and illustrated. The text was submitted by the authors in English.     

Morphology and photoluminescence properties of phenolic epoxy resin coating on KH550-modified SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript>: Eu<Superscript>2+</Superscript>, Dy<Superscript>3+</Superscript> powder in the presence of triarylsulfonium hexafluoroantimonate

In this study, the amino silane coupling agent (KH550)-modified SrAl₂0₄: Eu²⁺, Dy³⁺ phosphor powder coated with phenolic epoxy resin (EOCN) in the presence of triarylsulfonium hexafluoroantimonate catalyst was prepared using the combination of organic–inorganic composite dip-coating and UV curing coating methods. The results of SEM, TEM, and FTIR showed that the organic coating was a layer of compact membrane with a thickness of 20–50 nm, which can be named silane-modified epoxy monomer generated by the KH550 and the EOCN. Furthermore, it was observed that afterglow and spectrum properties of the coated phosphor powder had good long-afterglow luminescence properties, and revealed two emission peaks at 435 nm and 520 nm under the same excitation wavelength of 360 nm, respectively. More interesting, the emitting color of the coated sample was located in the area of cyan light on CIE1931 chromaticity diagram, which led to a slight blue shift rather than the yellow–green color of the pure SrAl₂0₄: Eu²⁺, Dy³⁺ phosphor powder.     

Sunlight‐activated long persistent luminescent polyurethane incorporated with amino‐functionalized SrAl2O4:Eu2+,Dy3+ phosphor

An amino‐terminated long persistent luminescent phosphor (Amino‐SrAl₂O₄:Eu²⁺,Dy³⁺) was prepared based on inorganic SrAl₂O₄:Eu²⁺,Dy³⁺ phosphor, chemically modified with 3‐aminopropyltriethoxysilane (KH550). Fourier transform infrared and X‐ray photoelectron spectral, thermogravimetric and scanning electron microscopic measurements confirmed the successful synthesis of Amino‐SrAl₂O₄:Eu²⁺,Dy³⁺. Then this amino‐functionalized phosphor was introduced into polyurethane (PU) through urea linkages, and the effects of the chemical combination of Amino‐SrAl₂O₄:Eu²⁺,Dy³⁺ and PU on the morphology, structure, storage stability, and mechanical, thermal and luminescent properties of the resultant long persistent luminescent polyurethane (LPLPU) were investigated. Compared with SrAl₂O₄:Eu²⁺,Dy³⁺/PU composites prepared by physical blending, the LPLPU shows better mechanical properties and storage stability due to the good compatibility of Amino‐SrAl₂O₄:Eu²⁺,Dy³⁺ with PU. More residues and higher initial decomposition temperature are observed because the interaction of the amino‐phosphor and PU delays the degradation. Study of the luminescent effect reveals that the LPLPU shows more than 10 h afterglow after cessation of the excitation light, and the brightness of green light in darkness is basically the same as that of LPLPU and SrAl₂O₄:Eu²⁺,Dy³⁺/PU. © 2016 Society of Chemical Industry     

Long Afterglow SrAl2O4:Eu2+,Dy3+ Phosphors as Luminescent Down‐Shifting Layer for Crystalline Silicon Solar Cells

SrAl₂O₄:Eu²⁺,Dy³⁺ phosphors can convert near ultraviolet light with lower sensitivity to the solar cell to yellow‐green light at which the solar cell has higher sensitivity and exhibit the excellent luminescent property of long persistence. Therefore, in this study, the authors firstly synthesized the fine SrAl₂O₄:Eu²⁺,Dy³⁺ phosphors and then produced SrAl₂O₄:Eu²⁺,Dy³⁺/SiO₂ composite films as spectral shifters to understand the effects of SrAl₂O₄:Eu²⁺,Dy³⁺ phosphor on photoelectric conversion efficiencies of a crystalline silicon photovoltaic module. Under one sun illumination, the composite film containing an appropriate amount of SrAl₂O₄:Eu²⁺,Dy³⁺ phosphor enhances the photoelectric conversion efficiency of the cell through spectral down‐shifting as compared to the bare glass substrate, and the maximum achieves 11.12%. In contrast, the commercial SrAl₂O₄:Eu²⁺,Dy³⁺ phosphor composite film is not effective for improving the photoelectric conversion efficiency because of the relatively lower visible light transmittance of film caused by the large aggregates. After one sun illumination for 1 min, the light source was turned off, and the cell containing the synthesized SrAl₂O₄:Eu²⁺,Dy³⁺ phosphor still shows an efficiency of 1.16% in the dark due to the irradiation by the long persistent light from SrAl₂O₄:Eu²⁺,Dy³⁺, which provides a possibility to fulfill the operation of solar cells even in the dark.     

Red-shift and improved afterglow of Sr3Al2-xBxO5Cl2:Eu2+, Dy3+ phosphors via a cation substitution strategy

Sr₃Al_2-xB_xO₅Cl₂:Eu²⁺, Dy³⁺ (x = 0, 0.2, 0.4) long persistent phosphors were prepared via solid-state process. The pristine Sr₃Al₂O₅Cl₂:Eu²⁺, Dy³⁺ phosphor exhibits orange/red broad band emission around 609 nm, which can be attributed to the electric radiation transitions 4f⁶5 d¹→4f⁷ of Eu²⁺. Upon the same excitation, the B³⁺-doped Sr₃Al_2-xB_xO₅Cl₂:Eu²⁺, Dy³⁺ phosphors display red-shift from 609 nm to 625 nm with increasing B³⁺ concentrations. The XRD patterns show that Al³⁺ can be replaced by B³⁺ in the host lattice at the tetrahedral site, which causes lattice contraction and crystal field enhancement, and thereafter achieves the red-shift on the emission spectrum. The XPS investigation provides direct evidence of the dominant 2-valent europium in the phosphor, which can be ascribed for the broad band emission of the prepared phosphors. The afterglow of all phosphors show standard double exponential decay behavior, and the afterglow of Sr₃Al₂O₅Cl₂:Eu²⁺, Dy³⁺is rather weak, while the sample co-doped with B³⁺shows longer and stronger afterglow, as confirmed after the curve simulation. The analysis of thermally stimulated luminescence showed that, when B³⁺ is introduced, a much deeper trap is created, and the density of the electron trap is also significantly increased. As a result, B³⁺ ions caused redshift and enhanced afterglow for the Sr₃Al_2-xB_xO₅Cl₂:Eu²⁺, Dy³⁺ phosphor.     

Eu2+, Dy3+: Sr2B5O9Cl,a new blue-emitting phosphor with long persistence

A new Eu²⁺, Dy³⁺: Sr₂B₅O₉Cl phosphor with long persistence was synthesized in a reducing atmosphere by a solid-state reaction process. The pure-phase phosphor was obtained by calcination at 900 °C. The introduction of Eu²⁺ into the lattice of the matrix resulted in a broad blue emission centered at 423 nm, which was due to the characteristic 4f6⁵d¹ to 4f⁷ energy transfer of Eu²⁺ ions. Both Eu-doped and Dy/Eu-codoped phosphors displayed afterglow behaviors due to the electron traps generated by the incorporation of tri-valanced rare earth cations into the original Sr lattice sites. The afterglow of Eu²⁺: Sr₂B₅O₉Cl and Eu²⁺, Dy³⁺: Sr₂B₅O₉Cl phosphors showed standard double exponential decay behaviors, and the Eu²⁺/Dy³⁺ co-doped sample demonstrated better afterglow properties than Eu²⁺-doped one. A longer lifetime for the electrons was confirmed after the afterglow decay curve simulation. Based on the analysis of thermally stimulated luminescence (TSL), the difference in afterglow was attributed to the different trap concentrations induced by the Dy³⁺ (Eu³⁺) doping in the Sr₂B₅O₉Cl matrix.     

Effect of Al/Sr ratio on the luminescence properties of SrAl2O4:Eu2+, Dy3+ phosphors

Recent studies have brought out many phosphors like Eu²⁺, Dy³⁺-doped alkaline earth aluminates. The trivalent Dy³⁺ ions as co-dopants greatly enhance the duration and intensity of persistent luminescence. These phosphors show excellent properties, such as high quantum efficiency, long persistence of phosphorescence, good stability and suitable color emission.In this work the effect of Al/Sr ratio on the afterglow and phosphorescence decay properties of Eu²⁺ and Dy³⁺ co-activated strontium aluminates synthesized by a solid-state process has been investigated. The luminescence properties of samples were investigated by means of excitation spectra, emission spectra and X-ray diffraction analysis.A variety of strontium aluminates, such as SrAl₂O₄, Sr₄Al₂O₇, Sr₃Al₂O₆, Sr₃Al₂(Eu, Dy, Y)O_7.5, Al₅(Eu, Dy, Y)O₁₂, Sr₄Al₁₄O₂₅, SrAl₁₂O₁₉ and (Eu, Dy, Y)AlO₃ have been identified in the samples prepared from starting precursors with Al/Sr mole ratios ranging from 0.44 to 5. The afterglow decay rate was found to be the fastest for sample with Al/Sr ratio of 4.18, in which SrAl₄O₇ phase was dominant. The afterglow decay rate for phosphor with Al/Sr ratio of 2, in which SrAl₂O₄ phase was dominant, was detected to be slow. Moreover, the emission spectra of the samples shift to yellow-green long wavelength from bluish-green-ultraviolet short wave with the increase of Al/Sr ratios resulting from the change in the composition.     

Laser synthesis and luminescence properties of SrAl2O4:Eu2+, Dy3+ phosphors

A laser melting method has been developed for the synthesis of highly luminescent, long-lasting SrAl₂O₄:Eu²⁺, Dy³⁺ phosphors. The high temperature achieved in high-power density CO₂ laser irradiation of mixtures of SrCO₃, Al₂O₃, Eu₂O₃, and Dy₂O₃ enabled the one-step, fast synthesis of these phosphors in air at atmospheric pressure. X-ray diffraction, Raman spectroscopy, and scanning electron microscopy characterization studies reveal that the produced materials consist of monoclinic SrAl₂O₄ grains extensively surrounded by rare-earth ion-enriched grain boundaries. The photoluminescence properties of laser-produced SrAl₂O₄:Eu²⁺, Dy³⁺ materials are discussed. The results reported here suggest that this laser melting method is a promising route for the synthesis of ceramic phosphors. It is presented as an alternative to the conventional sol–gel and solid-state methods, which require the use of high-temperature furnaces, flux additives, and reducing atmospheres.     

Atomic layer deposition (ALD) of nanoscale coatings on SrAl2O4-based phosphor powders to prevent aqueous degradation

The aqueous degradation of Eu²⁺-activated and Dy³⁺-codoped strontium aluminate (SrAl₂O₄:Eu²⁺, Dy³⁺, SA2-Green) long afterglow phosphors synthesized from solid-state reaction and coated with nanoscale metal oxide protective layers (≤12 nm) via atomic layer deposition (ALD) is investigated. Uncoated phosphor powders degrade rapidly upon water immersion and lose their green phosphorescence within 48 hours of water exposure. Postmortem investigations reveal hydration and decomposition of the SrAl₂O₄ phase. ALD of ~10 nm Al₂O₃ or ~12 nm TiO₂ is found to significantly improve the powder's resistance to aqueous degradation. All ALD-coated powders show minimal structural and chemical degradation and retain phosphoresence after 48 hours of water immersion. This enhanced durability offers a new pathway for applying long afterglow phosphors to outdoor applications like roadway markings or safety signage and for their incorporation into more eco-friendly waterborne coatings.     

Preparation of strontium aluminate: Eu2+ and Dy3+ persistent luminescent materials based on recycling alum sludge

Eu²⁺ and Dy³⁺ doped strontium aluminate persistent luminescent materials are prepared by solid state reaction using alumina obtained from the alum sludge [1]. Three group compositions; Sr (NO₃)₂ with alumina (calcined at 1100 °C, ESA1), SrO with alumina (calcined at 1400 °C, ESA2) and Sr(NO₃)₂ with alumina (calcined at 1400 °C, ESA3) doped with Eu³⁺: Dy³⁺ ions in different molar ratios (1 Eu³⁺: 2Dy³⁺, 1.5 Eu³⁺: 1.5Dy³⁺, 2Eu³⁺:1Dy³⁺ and 2.5Eu³⁺: 0.5 Dy³⁺) were prepared. The samples were fired under different under active carbon at 1250 °C. Surface morphology, crystalline structure, Photoluminescence measurements and the decay characteristic were characterized by SEM, XRD, and the photoluminescence spectrometers, respectively. The effect of the firing temperature at 1250 °C was also determined by apparent porosity and bulk density measurements. The results indicated that the main composition of the samples fired under active carbon powder was strontium aluminate with a very small amount of secondary phases. The results showed that the samples fired under active carbon had good phosphorescence properties and good decay time. A broad band UV-excited luminescence of the SrAl₂O₄:Eu²⁺, Dy³⁺ phosphorescent pigments was observed at λ_max = 517 nm due to transitions from 4f⁶, 5d¹ to 4f⁷ configuration of the emission center (Eu²⁺ ions). Photoluminescence spectra for ESA1 group show higher intensity than that of ESA2 and ESA3 groups. The difference in the behavior of the photoluminescence spectra for the three groups can be attributed to (i) different synthesis methods and (ii) the presence of different mixed phases (major SrAl₂O₄ and secondary phases).     

Synthesis and photoluminescence performance of single-component Ca3YAl3B4O15:Dy3+, Eu3+ white-emitting phosphor for white light-emitting diodes

A single-component Ca₃YAl₃B₄O₁₅ (CYAB):Dy³⁺, Eu³⁺ phosphor was synthesized by the traditional high temperature solid-phase method, Dy³⁺ and Eu³⁺ were codoped in the structure to obtain a warm white emission. The results of XRD and EDS revealed that all samples had the standard Ca₃YAl₃B₄O₁₅ structure, and no impurity phase appeared with codoping. The emission of Dy³⁺ in CYAB consisted of both main peaks at 476 nm and 570 nm, with which a white emission could be observed. Furthermore, a characteristic emission peak of Eu³⁺ appeared at 617 nm in Dy³⁺/Eu³⁺-codoped samples to supplement red component for the white emission of Dy³⁺, due to the energy transfer effect between Dy³⁺ and Eu³⁺. With the amount of Eu³⁺ raised, the correlated colour temperature of CYAB:Dy³⁺, Eu³⁺ phosphor obviously decreased, and a warm white light was successfully realized from the manufactured w-LEDs. Therefore, all results indicated that the single-component Dy³⁺/Eu³⁺ codoped CYAB white-emitting phosphor had a potential application in ultraviolet excited w-LEDs.     

Europium(II) in glasses of the Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript>-MnO-Eu<Subscript>2</Subscript>O<Subscript>3</Subscript> system

Triply and doubly charged states of europium are revealed by ¹⁵¹Eu Mössbauer spectroscopy in the structure of glasses of the composition (mol %) 19.5Al₂O₃, 31.5SiO₂, 26.5MnO, and 22.5Eu₂O₃. The isomer shifts in the Mössbauer spectra of Eu³⁺ and Eu²⁺ ions in the structure of glasses differ from the isomer shifts in the spectra of the Eu₂O₃ and EuO compounds. This difference is explained by the fact that the electron density at ¹⁵¹Eu nuclei is affected by the manganese and aluminum atoms, which are not bound directly to the europium atoms. The broadening of the spectra of the Eu²⁺ ions in glasses is caused by the nonuniform isomer shift.     

Synthesis and luminescence properties of single‐component Ca5(PO4)3F:Dy3+, Eu3+ white‐emitting phosphors

A series of Ca₅(PO₄)₃F:Dy³⁺, Eu³⁺ phosphors was synthesized by a solid‐state reaction method. The XRD results show that all as‐prepared Ca₅(PO₄)₃F:Dy³⁺, Eu³⁺ samples match well with the standard Ca₅(PO₄)₃F structure and the doped Dy³⁺ and Eu³⁺ ions have no effect on the crystal structure. Under near‐ultraviolet excitation, Dy³⁺ doped Ca₅(PO₄)₃F phosphor shows blue (486 nm) and yellow (579 nm) emissions, which correspond to ⁴F_9/2→⁶H_15/2 and ⁴F_9/2→⁶H_13/2 transitions respectively. Eu³⁺ co‐doped Ca₅(PO₄)₃F:Dy³⁺ phosphor shows the additional red emission of Eu³⁺ at 631 nm, and an improved color rendering index. The chromaticity coordinates of Ca₅(PO₄)₃F:Dy³⁺, Eu³⁺ phosphors also indicate the excellent warm white emission characteristics and low correlated color temperature. Overall, these results suggest that the Ca₅(PO₄)₃F:Dy³⁺, Eu³⁺ phosphors have potential applications in warm white light‐emitting diodes as single‐component phosphor.     

Luminescent properties of long‐lasting BaAlxOy:Eu2+,Dy3+ nanocomposites

BaAl_xO_y:Eu²⁺,Dy³⁺ blue‐green phosphor samples were synthesized by a combustion method at the low temperature of 500°C. Phosphor nanocrystallites with high brightness were obtained without significantly changing the crystalline structure of the host. The crystallite sizes determined from the Scherrer equation ranged between 34 and 41 nm. Different volume fractions of the BaAl_xO_y:Eu²⁺,Dy³⁺ powder were then introduced in LDPE polymer. The resulting composites were similarly analyzed and also thermally characterized by means of differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). PL results indicate that the LDPE‐phosphor interface, which is considered to have an influence on the composite behavior, did not significantly change the spectral positions of the phosphor materials, whose major emission peaks occurred at about 505 nm. The improved afterglow results for the composites may have been caused by morphological changes due to increased surface area and defects. Thermal results indicate that the BaAl_xO_y:Eu²⁺,Dy³⁺ particles acted as nucleating centers and enhanced the overall crystallinity in the LDPE nanocomposite while preventing lamellar growth, hence reducing the crystallite sizes in LDPE. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Photoluminescence characteristics and mechanism of SrAl2O4 co-doped with Eu3+ and Cu2+

SrAl₂O₄ co-doped with Cu²⁺ and Eu³⁺ was prepared at high temperature in a weakly oxidizing atmosphere by solid states reaction. X-ray diffraction (XRD) pattern of the sample shows that the doped sample exhibits SrAl₂O₄ crystalline phase. No characteristic peaks of dopant have been observed in XRD pattern of doped sample. The excitation and emission spectra of CuEu:SrAl₂O₄, Eu:SrAl₂O₄, Cu:SrAl₂O₄ samples consist of many sharp peaks. The excitation and emission spectra of the SrAl₂O₄ sample co-doped with Cu²⁺ and Eu³⁺ are significantly different from those of Eu:SrAl₂O₄ and Cu:SrAl₂O₄ samples. The novel photoluminescence (PL) characteristic of the co-doped sample is attributed to the composite luminescence of Cu²⁺ and Eu³⁺ ions in SrAl₂O₄ matrix.     

Fabrication and characterizations of Eu2+-Dy3+ co-doped SrAl2O4 ceramics with persistent luminescence

(Sr_0.97Eu_0.01Dy_0.02)Al₂O₄ persistent luminescence (PersL) ceramics were fabricated by solid-state reactive sintering in vacuum combined with hot isostatic pressing (HIP) using H₃BO₃ as a sintering additive. The phase composition, microstructure, luminescence properties, trap state, and PersL performance of HIP post-treated (Sr_0.97Eu_0.01Dy_0.02)Al₂O₄ PersL ceramics were discussed. For the (Sr_0.97Eu_0.01Dy_0.02)Al₂O₄ PersL ceramics after HIP post-treatment, the initial luminescence intensity of the ceramics reached over 6400 mcd/m² with simulated daylight irradiation of 1000 lx for 5 min, and the persistent emission decay time > 17 h. This is much better than the SrAl₂O₄:Eu²⁺,Dy³⁺ PersL powders and the other luminescent ceramics. In addition, this method is a solid-state reactive sintering method for synthesizing ceramics, which has the advantages of low cost and simple operation, and is suitable for large-scale, high-volume industrial production.     

Visible up-conversion luminescence of CaWO<Subscript>4</Subscript>: Er<Superscript>3+</Superscript>,Yb<Superscript>3+</Superscript> and emission enhancement by tri-doping of Li<Superscript>+</Superscript> ions

Er³⁺,Yb³⁺ co-doped CaWO₄ polycrystalline powders were prepared by a solid-state reaction and their up-conversion (UC) luminescence properties were investigated in detail. Under 980 nm laser excitation, CaWO₄: Er³⁺,Yb³⁺ powder exhibited green UC emission peaks at 530 and 550 nm, which were due to the transitions of Er³⁺ (²H_11/2)→Er³⁺ (⁴I_15/2) and Er³⁺ (⁴S_3/2)→Er³⁺ (⁴I_15/2), respectively. Effects of Li+ tri-doping into CaWO₄: Er³⁺,Yb³⁺ were investigated. The introduction of Li⁺ ions reduced the optimum calcinations temperature about 100 °C by a liquid-phase sintering process and the UC emission intensity was remarkably enhanced by Li⁺ ions, which could be attributed to the lowering of the symmetry of the crystal field around Er³⁺ ions.     

Study on the properties of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript>-BaO lead-free glass using in the electronic pastes

The Sb₂O₃ doping lead-free glass in Bi₂O₃-B₂O₃-BaO ternary system were prepared in the composition of several different subsystem, and the glass powder was produced through the process of water quenching. Glass transition temperatures (T _g ), glass soften temperatures(T _s ), the volume resistivity (ρ) in the temperature range of 80–200°C, and linear thermal coefficients of expansion in the temperatures range of 25–300°C (α_25–300) were measured for subsystems along with the different ratio of Bi₂O₃, B₂O₃ and BaO. For these subsystems, T _g ranged from 458 to 481°C, and T _s ranged from 490 to 512°C, both decreasing with the increasing of Bi₂O₃/B₂O₃ ratio, and increasing with the increasing of BaO/B₂O₃ ratio. The measured α_25–300 ranged from 65.3 to 76.3 × 10⁻⁷ K⁻¹, with values increasing with increasing Bi₂O₃/B₂O₃ and BaO/B₂O₃ ratio. The volume resistivity remains at a high standards, which may caused by it’s non-alkali composition, and it fluctuated from 10¹³ to 10¹¹ Ω cm with the temperature varied from 80–200°C. The structure of Bi₂O₃-B₂O₃-BaO ternary leadfree glass system was mearsured by FT-IR. The IR studies indicate that these glasses are made up of [BiO₆], [BO₃], and [BO₄] basic structural units, and it appears that Ba²⁺ acts as a glass-modifier in this ternary system, but the Bi³⁺ has entered the glass network when it is in relative high content so as to change the α_25–300, T _s and T _g .     

Highly efficient photostimulated luminescence of Pb2+ doped SrAl2O4:Eu2+, Dy3+ borate glass for long-term stable optical information storage

Despite the transformative role in society, information storage materials remain vulnerable to the corrosion by water, oxygen and heat, while topological engineering of glass provides an attractive solution to this tricky problem. Here, a considerable discovery is reported that the doping of Pb²⁺ ions could greatly affect the luminescence behavior of SrAl₂O₄:Eu²⁺, Dy³⁺ borate glass, resulting in a controllable property between long persistent luminescence and photostimulated luminescence. Specifically, high concentration Pb doped samples featuring the deeper continuously distributed trap levels with 0.97–1.47 eV performed highly efficient photostimulated luminescence. In other words, the ultraviolet-visible photons could be “written” in the deeper traps and then “read out” under the stimulation of a 980 nm near-infrared laser. From the combined structural and luminescence characterizations, it was speculated that the deeper trap originated from the increase of oxygen vacancies at defect levels. The practical anti-counterfeiting application was successfully realized based on this material with superior photostimulated luminescence phenomenon, which rendered the SrAl₂O₄:Eu²⁺, Dy³⁺ borate glass shine in a new field such as anti-counterfeiting, yet as a promising candidate for information storage application.     

Crystal structure of new compound (Rb,K)<Subscript>2</Subscript>Cu<Subscript>3</Subscript>(P<Subscript>2</Subscript>O<Subscript>7</Subscript>)<Subscript>2</Subscript>

A new compound of (Rb,K)₂Cu₃(P₂O₇)₂ is obtained by high-temperature reactions from a mixture of RbNO₃, KNO₃, Cu(NO₃)₂, and (NH₄)₄P₂O₇. The crystal structure was solved by direct methods and refined to R ₁ = 0.056 for 5022 independent reflections. The compound belongs to a rhombic crystal system, P2₁2₁2₁, Z = 8, a = 9.9410(7) Å, b = 13.4754(6) Å, c = 18.6353 (3) Å, and R = 0.056. The basis of the structure is a complex copper-phosphate skeleton of the composition of [Cu₃(P₂O₇)₂]^2–, which can be regarded as consisting of two types of heteropolyhedral layers parallel to the (001) plane. The layers are alternated with each other, forming a frame, in the cavities of which the positions of alkali cations are located, statistically populated with K⁺ and Rb⁺ ions. Based on the refined populations of the positions of alkali cations, an exact chemical formula of the compound can be written as Rb_1.28K_0.72Cu₃(P₂O₇)₂. The compound is the most complex among those known to this day of the composition of A₂ ^IB₃ ^II(P₂O₇)₂ (A = Li, Na, K, Rb, or Cs; B = Ni, Cu, or Zn).