A comparative study on dispersion of carbon nanotubes in (styrene‐butadiene rubber)‐based nanocomposites

The efficient dispersion of carbon nanotubes (CNTs) is a challenging task in reaching the usable nanocomposites. In this study, a comparative analysis on dispersion of multiwalled CNTs multiwalled carbon nanotubes (MWNTs) in styrene‐butadiene rubber (SBR) latex was carried out by using two anionic surfactants, sodium dodecyl benzene sulfonate and sodium lauryl sulfate. The MWNTs were first predispersed in distilled water using two surfactants individually followed by gentle mixing the MWNT predispersion into SBR latex. By using the technique of ultraviolet‐visible spectroscopy, the study on MWNT dispersion in aqueous media was focused on surfactant concentration, MWNT functionality, and ultrasonication time. The ultraviolet‐visible absorptions showed the positive effect of MWNT functionality in addition to surfactant concentration with no great effect of ultrasonication time over 15 min. In comparison with sodium lauryl sulfate, the existing benzene ring in the sodium dodecyl benzene sulfonate structure seems to result in higher adsorption of surfactant onto the MWNTs surface and, hence, better MWNT dispersion. The MWNT dispersion was further improved by using hydroxyl functionalized MWNTs mainly because of the formation of hydrogen bonding between the hydrophilic head of surfactant and the existing hydroxyl group of the functionalized MWNTs. After mixing the MWNT predispersion into SBR latex, the dispersion of MWNTs was further characterized by using electrical volume conductivity, microscopy technique, and rheological measurements. In rheometry tests of the lattices, the storage modulus at terminal zone was utilized for tracking the degree of MWNT dispersion in the nanocomposite. The pictures of scanning electron microscopy showed the efficiency of MWNT functionality in enhancing the degree of dispersion. In conductivity tests, the percolation threshold was obtained at about 1 part by weight per hundred parts of resin of the functionalized MWNT in dried film. J. VINYL ADDIT. TECHNOL., 23:28–34, 2017. © 2015 Society of Plastics Engineers     

On the influence of the processing conditions on the performance of electrically conductive carbon nanotube/polymer nanocomposites

We prepared multiwalled carbon nanotube/polystyrene (MWCNT/PS) nanocomposites using a latex-based process, the main step of which consists of directly mixing an aqueous suspension of exfoliated MWCNTs and a PS latex, both stabilized by an anionic surfactant. After freeze drying and compression molding homogeneous polymer films with well-dispersed carbon nanotubes were produced as evidenced by scanning electron microscopy. Conductivity measurements performed on our nanocomposite films show that they have a low percolation threshold and exhibit high levels of electrical conductivity above this threshold. We observe that both these properties are influenced by the applied processing conditions, i.e., temperature and time, and provide a plausible explanation based on the diffusive motion of the MWNTs in the polymer melt during the compression molding stage.     

Improving dispersion of multiwalled carbon nanotubes in polyamide 6 composites through amino‐functionalization

The focus of this study is to investigate the state of dispersion of different treated multiwalled carbon nanotubes (MWNTs) in polyamide 6 (PA6). The MWNTs used in composites were grafted by 1,6‐hexamethylenediamine (HMD) via acid‐thionyl chloride to improve their compatibility with PA6 matrix. A microstructure transformation of MWNTs is found during the treatment process. Acidification makes the MWNTs compact and grafting HMD promotes the compact structure loose again. The MWNTs after different treatment were used to fabricate MWNTs/PA6 composites through melt blending. The dispersion of different MWNTs in PA6 was observed by a combination of scanning electron microscopy, optical microscopy, and transmission electron microscopy. The results show that the amino‐functionalized MWNTs are dispersed more homogeneously in PA6 than the purified MWNTs, and the poorest dispersion is achieved for acid treated MWNTs. It is indicated that the loose structure and functionalized surface of MWNTs benefit the dispersion of MWNTs in PA6. In addition, the amino‐functionalization of MWNTs improves the compatibility between the MWNTs and PA6, resulting in stronger interfacial adhesion. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Preparation of the Pt nanoparticles decorated poly(N-acetylaniline)/MWNTs nanocomposite and its electrocatalytic oxidation toward formaldehyde

In this work, a novel 3D nanocomposite is presented, which is consisted of poly(N-acetylaniline) (PAANI)/multi-walled carbon nanotubes (MWNTs) nanorods (in which the inner layer was comprised of MWNTs and the outer layer was PAANI, forming a core-shell structure) and the decorated Pt nanoparticles. Electrochemical techniques (such as electrochemical impedance spectroscopy (EIS)), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), X-ray diffraction (XRD) and transmission electron microscopy (TEM) are used to characterize the nanocomposite. The resulting Pt/PAANI/MWNTs nanocomposite can be served as a higher efficient catalyst for the electrochemical oxidation of formaldehyde at 0.41 V with the catalytic current of 0.73 mA, which was accompanied with about 45 mV potential negative shifts and two-fold increase in peak current comparison to the Pt/PAANI. These results reveal that the Pt/PAANI/MWNTs nanocomposite film is quite promising in the fuel cell applications.     

Enhancement of the surface and bulk mechanical properties of polystyrene through the incorporation of raw multiwalled nanotubes with the twin‐screw mixing technique

In this article, we present the effects of incorporated multiwalled nanotubes (MWNTs) on a metal surface and the bulk mechanical properties of as‐synthesized polystyrene (PS)–MWNT composites prepared with the twin‐screw mixing technique. The MWNTs used for preparing the composites were raw compounds that were not treated with any surface modifications. The morphology for the dispersion capability of the MWNTs in the PS matrix was subsequently characterized with transmission electron microscopy. Surface mechanical property studies (i.e., wear resistance and hardness) showed that the integration of MWNTs led to a distinct increase in the wear resistance and also the micro/nanohardness with up to a 5 wt % MWNT loading in the composites. Moreover, the enhancement of the wear resistance of the as‐prepared composites, in comparison with pure PS, was further identified with scanning electron microscopy observations of the surface morphology after testing. On the other hand, for bulk mechanical property studies (i.e., the tensile strength and flexural strength), the composites containing a 3 wt % concentration of MWNTs in the PS matrix exhibited the best performance with respect to the tensile strength and flexural strength. This means that this composition of MWNTs exhibited good compatibility with the PS matrix, and this can be attributed to the π–π interacting forces existing between the aromaticity of the MWNTs and PS matrix. Furthermore, at higher MWNT loadings (e.g., 5 wt %), raw MWNTs were aggregated in the polymer matrix, as observed by transmission electron microscopy. Also, this led to an obvious decrease in the tensile strength and flexural strength. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Morphology,thermal, and rheological behavior of nylon 11/multi‐walled carbon nanotube nanocomposites prepared by melt compounding

Nylon 11 (PA11) nanocomposites with different loadings of multi‐walled carbon nanotubes (MWNTs) were prepared by melt compounding. Scanning electron microscopy images on the fracture surfaces of the composites showed a uniform dispersion of MWNTs throughout the matrix. The presence of the MWNTs significantly improved the thermal stability and enhanced the storage modulus (G′) of the polymer matrix. Melt rheology studies showed that, compared with neat PA11, the incorporation of MWNT into the matrix resulted in higher complex viscosities (|η*|), storage modulus (G′), loss modulus (G″), and lower loss factor (tanδ). PA11 and its nanocomposites containing less than 1 wt% MWNTs showed similar frequency dependencies and reached a Newtonian plateau at low frequencies. For the nanocomposite with 2 wt% MWNTs, the regional network was destroyed and the orientation of the MWNTs during shearing exhibited a very strong shear thinning effect. The complex viscosities (|η*|) of the nanocomposites are larger than that of neat PA11 and decreased with increasing the temperature. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics Engineers     

The effect of different modified multiwalled carbon nanotubes on tribological behaviors of poly(furfuryl alcohol) composite coatings

Three kinds of modified multiwalled carbon nanotubes (MWNTs) with different length were obtained by grafting carboxylic groups on long MWNTs or copolymer groups on short and long MWNTs. The modified MWNTs were examined by infrared spectroscopy, thermal gravimetric analysis, X‐ray photoelectron spectroscopy, and field emission scanning electron microscopy (FESEM). Afterward, the modified MWNTs were introduced into poly (furfuryl alcohol) (PFA), and the tribological behaviors of the resultant PFA composite coatings were investigated using a ring‐on‐block wear tester under dry friction condition. The dispersion of MWNTs in PFA composites and the worn surfaces were investigated by FESEM. The results indicated that the MWNTs dispersion and the tribological behaviors of PFA composite coatings could be obviously improved by modification with the copolymer. More significantly, under similarly uniform dispersion of MWNTs, the tribological properties of PFA composite coatings with short nanotubes presented better results when compared with those with long nanotubes because of the influence of nanotube length on the degree of modification of the MWNTs surfaces. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effect of different carbon fillers on the properties of PP composites: Comparison of carbon black with multiwalled carbon nanotubes

Polypropylene (PP)/carbon composites were prepared via melt blending PP with carbon fillers, including multiwalled carbon nanotubes (MWNTs) and carbon black (CB). Field‐emission scanning electron microscopy was used to research the morphology and dispersion of fillers in the PP matrix. The electrical properties, mechanical properties, and crystallization behaviors of PP/carbon composites were also investigated. The results show that the influence of MWNTs on the properties of PP composites is different with CB, which can be ascribed to the structure and aspect ratio difference between MWNTs and CB. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:4823–4830, 2006     

Facile way to disperse single‐walled carbon nanotubes using a noncovalent method and their reinforcing effect in poly(methyl methacrylate) composites

In this work, a noncovalent method was used to functionalize and thereby disperse single‐walled carbon nanotubes (SWCNTs) in dimethylformamide with poly[methyl methacrylate‐co‐(fluorescein O‐acrylate)] as a surfactant, and then the resultant poly(methyl methacrylate) (PMMA)‐based nanocomposites were fabricated via solution casting. The dispersion level of carbon nanotubes in the solvent was investigated by means of scanning electron microscopy and atomic force microscopy. The results showed that carbon nanotubes were well wrapped by the surfactant, and small carbon nanotube bundles several nanometers or less in diameter and several micrometers in length were obtained. Both scanning electron microscopy and transmission electron microscopy confirmed the uniform dispersion of SWCNTs in the PMMA matrix. The mechanical properties of the composites were determined with a universal tension tester. The PMMA composite containing 2 wt % SWCNTs showed improved tensile properties versus neat PMMA, showing 56 and 30% enhancements of the tensile modulus and tensile stress, respectively. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Electrical properties and morphology of highly conductive composites based on polypropylene and hybrid fillers

Electrically conductive polypropylene/hybrid filler (PP/GO–MWNTs) and PP/MWNTs composite have been prepared via melt blending PP with the hybrid filler (multiwalled carbon nanotubes (MWNTs) and graphite oxide (GO)) and the single filler (MWNTs), respectively. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to research the interior morphology of the GO–MWNTs hybrid filler, and the dispersion of the hybrid filler in the PP matrix is also observed by SEM. The results show that a clear reduction in electrical resistivity and percolation threshold of PP/GO–MWNTs composite can be ascribed to the corporation of GO. The electrical properties of PP composites were improved owing to the effective conductive networks formed by hybrid filler.