A novel phosphorus‐containing copolyester with low melting temperature and high flame retardancy

BACKGROUND: The increasing uses of non‐woven fabrics need the development of a kind of novel flame‐retardant polyester with low melting temperature. Neopentyl glycol (NPG) and 3‐(hydroxyphenylphosphinyl)propionic acid (HPPPA) were used as the third and fourth comonomer to synthesize phosphorus‐containing poly[(ethylene terephthalate)‐co‐(neopentyl terephthalate)] (PENT) with both flame retardancy and low melting temperature. RESULTS: The chemical structure of PENT was confirmed using Fourier transform infrared, ¹H NMR, ¹³C NMR and ³¹P NMR spectroscopy. PENT displays a monomodal gel permeation chromatography curve. When the content of NPG was kept at 10 wt% and the content of HPPPA increased to 5 wt%, the melting temperature (T_m) of the resulting PENT5/10 decreases to 171.2 °C, a 34.6 °C decrease compared to that of PENT0/10 (containing no HPPPA). The flammability of the PENTs was characterized with the limiting oxygen index (LOI) test, the UL‐94 vertical test and the cone calorimeter test. The incorporation of HPPPA can significantly improve the flame retardancy of the PENTs, the LOI values of the PENTs increasing from 24.4 to 37.6, as the loading of HPPPA increases from 0 to 5 wt%. CONCLUSION: The PENTs possess both low melting temperatures and excellent flame retardancy. HPPPA can be used as fourth comonomer to improve the flame retardancy of the PENTs, while decreasing the T_m value of the copolyester. Copyright © 2009 Society of Chemical Industry     

Effect of surface functionalization on the physicomechanical properties of a novel biofunctional copolymer

The physicomechanical properties of functionally active poly(hydroxyethyl methacrylate‐co‐methyl methacrylate) [poly(HEMA‐co‐MMA)] are evaluated. It has been reported that the surface phosphorylated poly(HEMA‐co‐MMA) is capable of eliciting direct bone bonding when implanted in vivo. Hence, it is important to examine the physicomechanical property of the copolymer as a function of surface modification. The properties assessed are differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), equilibrium swelling, compressive strength, and dynamic mechanical analysis. According to the DSC data, the glass transition temperature, T_g of poly(HEMA‐co‐MMA) is not significantly altered by surface phosphorylation. The TGA results demonstrated that unmodified and surface phosphorylated copolymers have similar degradation profile. The differential thermal analysis further supports the data. The equilibrium swelling of functionalized poly(HEMA‐co‐MMA) in phosphate buffer saline ascertained that surface phosphorylation significantly increased the hydrophilicity of the copolymer. The study further illustrated that the percentage of equilibrium swelling appreciably increases with increase in HEMA content in the copolymer and reached a plateau after 100 h. Both compressive strength and compressive modulus of poly (HEMA‐co‐MMA) decreased due to surface phosphorylation while dynamic storage modulus value was not altered. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis of degradable copolymer networks containing hemiacetal components and well‐defined backbones

A novel copolymer network was prepared using divinyl ether bis[4‐(vinyloxy)butyl] (4‐methyl‐1,3‐phenylene) biscarbamate (BECT) as crosslinking agent. First, the backbone chains were synthesized by the copolymerization of acrylic acid (AA) and methyl methacrylate (MMA) using reversible addition‐fragmentation chain‐transfer technique. The molecular weight of poly(AA‐co‐MMA) was well‐controlled, and the polydispersity was low. Carboxyl group on the poly(AA‐co‐MMA) chains then reacted with BECT in the presence of pyridinium p‐toluenesulfonate, generating a copolymer network with hemiacetal component in the crosslinking segment. After being treated in strong acid, this copolymer network was able to be degraded owing to the hemiacetal structure, but the backbone chains remained intact. The copolymer network was stable in basic or neutral environment. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synergism between hydrotalcite and silicate‐modified expandable graphite on ethylene vinyl acetate copolymer combustion behavior

Influence of independent Mg–Al‐layered double hydroxide (LDH), silicate modified expandable graphite (EG), mixture of LDH and EG at various ratios on ethylene vinyl acetate copolymer (EVA) combustion behavior and thermal stability was detected in sequence through the limiting oxygen index (LOI), vertical combustion (UL‐94) level, microscale combustion calorimeter (MCC) tests and thermal gravimetric/differential thermal gravimetric (TG/DTG) analysis. Results show that the 30 wt % LDH can improve the LOI of 70EVA/30LDH to 27.0%, but the combustion accompanies with serious melt‐dropping. While, the same amount of the EG can increase the LOI, UL‐94 level to 28.5%, V‐0 respectively. However, the combination of LDH and EG can further enhance the 70EVA/20LDH/10EG flame retardancy, it presents the LOI of 29.7%, UL‐94 level of V‐0, and total heat release of 29.5 kJ g^?1. The excellent flame retardancy is attributed to its compact residue. Compared with residue mass, the residue compactness plays a more important role in improving flame retardancy. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44634.     

Synthesis and characterization of poly(HEMA‐co‐MMA)‐g‐POSS nanocomposites by combination of reversible addition fragmentation chain transfer polymerization and click chemistry

New hybrid poly(hydroxyethyl methacrylate‐co‐methyl methacrylate)‐g‐polyhedral oligosilsesquioxane [poly(HEMA‐co‐MMA)‐g‐POSS] nanocomposites were synthesized by the combination of reversible addition fragmentation chain transfer (RAFT) polymerization and click chemistry using a grafting to protocol. Initially, the random copolymer poly(HEMA‐co‐MMA) was prepared by RAFT polymerization of HEMA and MMA. Alkynyl side groups were introduced onto the polymeric backbones by esterification reaction between 4‐pentynoic acid and the hydroxyl groups on poly(HEMA‐co‐MMA). Azide‐substituted POSS (POSS? N₃) was prepared by the reaction of chloropropyl‐heptaisobutyl‐substituted POSS with NaN₃. The click reaction of poly(HEMA‐co‐MMA)‐alkyne and POSS? N₃ using CuBr/PMDEATA as a catalyst afforded poly(HEMA‐co‐MMA)‐g‐POSS. The structure of the organic/inorganic hybrid material was investigated by Fourier transformed infrared, ¹H‐NMR, and ²⁹Si‐NMR. The elemental mapping analysis of the hybrid using X‐ray photoelectron spectroscopy and EDX also suggest the formation of poly(HEMA‐co‐MMA)‐anchored POSS nanocomposites. The XRD spectrum of the nanocomposites gives evidence that the incorporation of POSS moiety leads to a hybrid physical structure. The morphological feature of the hybrid nanocomposites as captured by field emission scanning electron microscopy and transmission electron microscopic analyses indicate that a thick layer of polymer brushes was immobilized on the POSS cubic nanostructures. The gel permeation chromatography analysis of poly(HEMA‐co‐MMA) and poly(HEMA‐co‐MMA)‐g‐POSS further suggests the preparation of nanocomposites by the combination of RAFT and click chemistry. The thermogravimetric analysis revealed that the thermal property of the poly(HEMA‐co‐MMA) copolymer was significantly improved by the inclusion of POSS in the copolymer matrix. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and characterization of binary copolymers of methyl methacrylate with glycidyl methacrylate and 2‐hydroxy ethyl methacrylate as carriers for cellulase

Cellulase was immobilized directly on methyl methacrylate‐glycidyl methacrylate copolymer (MMA‐co‐GMA) and methyl methacrylate‐2‐hydroxy ethyl methacrylate copolymer (MMA‐co‐HEMA) by covalent attachment and crosslinking methods. The properties of the immobilized cellulase were investigated and compared with those of the free one. For the assays carried out through crosslinking method at 25°C and pH 7, the retained activities were found to be 91.92% and 74.63%, respectively, for MMA‐co‐GMA and MMA‐co‐HEMA crosslinked with 0.1% of 1‐cyclohexyl‐3‐(2‐morpholino‐ethyl) carbodiimide metho‐p‐toluenesulfonate (CMCT), respectively. The immobilized cellulase had better stability and higher retained activities with respect to pH, temperature, and storage stability than the free one. In the repeated use experiments, the immobilized cellulase using (MMA‐co‐GMA)‐CMCT (0.1%) and (MMA‐co‐HEMA)‐CMCT (0.1%) did not change after 10 and eight times of repeated use and maintained 67% and 62% from their original activities after 25 times, respectively. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

A biodegradable diblcok copolymer poly(ethylene glycol)‐block‐poly(L‐lactide‐co‐2‐methyl‐2‐carboxyl‐propylene carbonate): Docetaxel and RGD conjugation

A diblcok copolymer monomethoxy poly (ethyleneglycol)‐block‐poly(L ‐lactide‐co‐2‐methyl‐2‐carboxyl‐propylene carbonate) (MPEG‐b‐P(LA‐co‐MCC)) was obtained by copolymerization of L ‐lactide (LA) and 2‐methyl‐2‐benzoxycarbonyl‐propylene carbonate (MBC) and subsequent catalytic hydrogenation. The pendant carboxyl groups of the copolymer MPEG‐b‐P(LA‐co‐MCC) were conjugated with antitumor drug docetaxel and tripeptide arginine‐glycine‐aspartic acid (RGD), respectively. ¹H‐NMR spectra confirmed the structure of the copolymer MPEG‐b‐P(LA‐co‐MCC/docetaxel) and MPEG‐b‐P(LA‐co‐MCC/RGD). In vitro antitumor assay indicates that the MPEG‐b‐P(LA‐co‐MCC/docetaxel) conjugate shows high cytotoxic activity against HeLa cancer cells. Cell adhesion and spreading experiment shows that copolymer MPEG‐b‐P(LA‐co‐MCC/RGD) is of benefit to cell adherence and is a promising biodegradable material for cell and tissue engineering. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Flexible and flame‐retardant S‐SEB‐S triblock copolymer/PPE nano‐alloy

We observed that modified polyphenylene ether (PPE) was solubilized in thermoplastic styrenic elastomer (TPS) and that a two‐phase lacy structure formed on nanometer scales when the TPS composition was 67 wt % and modified PPE and polystyrene‐block‐poly(styrene‐co‐ethylene‐co‐butylene)‐block‐polystyrene (S‐SEB‐S triblock copolymer) were blended. However, the molecular weight of the outer PS block segments M_outPS and the content of the outer PS block segments ?_outPS were <10,000 g/mol and 20 wt %, respectively. The resulting S‐SEB‐S/modified PPE nano‐alloy exhibited both flexibility and flame retardancy, unlike other materials, where a trade‐off exists between these two properties; that is, the flame retardancy was excellent when the phosphorus additive was present. This combination of properties might be attributed to the two‐phase nanometer‐scale structure consisting of flame‐retardant styrene/PPE domains and a continuous soft, lacy SEB matrix. The results for polystyrene‐block‐poly(ethylene‐co‐butylene)‐block‐polystyrene (S‐EB‐S triblock copolymer)/modified PPE blends were presented for comparison. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40446.     

Effects of tetramethylpolycarbonate‐block‐poly(styrene‐co‐acrylonitrile) copolymers containing various amounts of acrylonitrile on the interfacial properties of polycarbonate and poly(styrene‐co‐acrylonitrile) blends

Tetramethylpolycarbonate‐block‐poly(styrene‐co‐acrylonitrile) (TMPC‐block‐SAN) block copolymers containing various amounts of acrylonitrile (AN) were examined as compatibilizers for blends of polycarbonate (PC) with poly(styrene‐co‐acrylonitrile) (SAN) copolymers. To explore the effects of block copolymers on the compatibility of PC/SAN blends, the average diameter of the dispersed particles in the blend was measured with an image analyzer, and the interfacial properties of the blends were analyzed with an imbedded fibre retraction technique and an asymmetric double‐cantilever beam fracture test. Reduction in the average diameter of dispersed particles and effective improvement in the interfacial properties was observed by adding TMPC‐block‐SAN copolymers as compatibilizer of PC/SAN blend. TMPC‐block‐SAN copolymer was effective as a compatibilizer when the difference in the AN content of SAN copolymer and that of SAN block in TMPC‐block‐SAN copolymer was less than about 10 wt%. Copyright © 2004 Society of Chemical Industry     

Thermal crosslinking behavior of poly (aryl ether ketone) copolymers containing naphthalene moieties

A series of poly[(ether ether ketone)‐co‐(ether naphthalene ether ketone)] (P(EEK‐co‐ENEK)) copolymers were heated under a variety of conditions. The thermal crosslinking behavior was monitored by differential scanning calorimetry (DSC), electron spin resonance (ESR) and wide‐angle X‐ray diffraction (WAXD). The results indicate that under a non‐oxidative environment such as nitrogen P(EEK‐co‐ENEK) is more stable, while under oxidative conditions a crosslinking reaction takes place that causes a reduction in the crystallizability of the copolymers, and an increase in the concentration of free radicals on the copolymer. ESR results suggest that the crosslinking reaction proceeds via free radicals. Subsequently two kinds of free radicals were characterized: one is an RO^? type free radical and the other is a naphthalene ring free radical. Copyright © 2004 Society of Chemical Industry     

Rubber modification of unsaturated polyester resin with core–shell rubber particles: Effect of shell composition

Poly(butyl acrylate)/poly(vinyl acetate‐co‐methyl methacrylate) PBA/P(VAc‐co‐MMA) core–shell rubber particles with various shell compositions, i.e., VAc/MMA weight ratios, were used to toughen unsaturated polyester. The morphology and surface‐free energy of the rubber particles were determined by transmission electron microscopy (TEM) and contact angle measurements, respectively. The effect of shell structure on the dispersion state of rubber particles inside the unsaturated polyester resin was studied by scanning electron microscopy and TEM. Increasing MMA units in the shell changed the particle dispersion state from small agglomerates or globally well‐dispersed particles to large aggregates in the cured‐resin matrix. For the blends that contain 5 wt% rubber, the highest un‐notched impact toughness, stress‐intensity factor (K_IC), and fracture energy (G_IC) were observed for the blend containing PVAc shell particles. The results showed that by increasing the particle level from 5 to 10 wt%, the highest K_IC and G_IC values were obtained for the blend containing rubber particles with VAc/MMA (80/20 wt/wt) copolymer shell. The crack‐tip damage zone in the neat and rubber‐modified unsaturated polyester resins was observed by means of transmission optical microscopy. In addition, using PVAc shell particles exhibited a minimum reduction in the volume shrinkage and tensile properties of the rubber‐modified resin. POLYM. ENG. SCI., 52:1928–1937, 2012. © 2012 Society of Plastics Engineers     

Morphologies of polybutylacrylate/poly(styrene‐co‐methyl methacrylate) latex prepared by starved emulsion polymerization Part I. Thermodynamics equilibrium morphology

Heterogeneous latexes were prepared by a semicontinuous seeded emulsion polymerization process under monomer starved conditions at 80 °C using potassium persulfate as the initiator and sodium dodecyl sulfate as the emulsifier. Poly(butyl acrylate) latexes were used as seeds. The second‐stage polymer was poly(styrene‐co‐methyl methacrylate). By varying the amounts of methyl methacrylate (MMA) in the second‐stage copolymer, the polarity of the copolymer phase could be controlled. Phase separation towards the thermodynamic equilibrium morphology was accelerated either by ageing the composite latex at 80 °C or by adding a chain‐transfer agent during polymerization. The morphologies of the latex particles were examined by transmission electron microscopy (TEM). The morphology distributions of latex particles were described by a statistical method. It was found that the latex particles displayed different equilibrium morphologies depending on the composition of the second‐stage copolymers. This series of equilibrium morphologies of [poly(butyl acrylate)/poly(styrene‐co‐methyl methacrylate)] (PBA/P(St‐co‐MMA)) system provides experimental verification for quantitative simulation. Under limiting conditions, the equilibrium morphologies of PBA/P(St‐co‐MMA) were predicted according to the minimum surface free energy change principle. The particle morphology observed by TEM was in good agreement with the predictions of the thermodynamic model. Therefore, the morphology theory for homopolymer/homopolymer composite systems was extended to homopolymer/copolymer systems. © 2002 Society of Chemical Industry     

Synthesis,crystallinity and degradation properties of biodegradable poly[(sebacic anhydride)‐co‐caprolactone] triblock copolymers

BACKGROUND: A series of novel biodegradable poly[(sebacic anhydride)‐co‐caprolactone] (PSA‐co‐PCL) triblock copolymers were prepared by melt condensation of acylated PSA and monofunctional hydroxyl‐terminated PCL prepolymers. These copolymers could be used as novel drug delivery carriers with expected good drug permeability due to the PCL component. The degradation rate and mode can be modulated by varying the ratio of monomers in the copolymer. RESULTS: The homopolymers and copolymers were characterized using ¹H NMR, gel permeation chromatography and differential scanning calorimetry (DSC). ¹H NMR confirmed the formation of triblock copolymers that comprise a middle PSA block and two side PCL blocks. DSC revealed that the melting temperature and degree of crystallinity for both sebacic anhydride (SA) and caprolactone (CL) components are strongly composition dependent, implying the hindrance effect of the two components on the crystallinity. In vitro degradation experiments showed that the mass loss is significantly accelerated for samples in base buffer solution and more rapid for the copolymers with a higher SA content. Scanning electron microscopy revealed that for SA‐rich copolymer, PSA(80 wt%)‐co‐PCL, surface erosion dominated the degradation mode of the sample. In contrast, for CL‐rich copolymer, PSA(20 wt%)‐co‐PCL, a micropore structure developed at a degradation time of 155 h along the edges of the sample, owing to the hydrolysis of SA. CONCLUSION: It is concluded that the rate and mode of degradation of these copolymers can be tuned by varying the composition of the copolymers. Copyright © 2007 Society of Chemical Industry     

Synthesis of well‐defined comb‐like amphiphilic copolymers with protonizable units in the pendent chains: 2. Poly(2‐(dimethylamino)ethyl methacrylate) grafted poly(methyl methacrylate‐co‐2‐hydroxyethyl methacrylate) copolymers and their association behavior in aqueous solution

Narrow‐distribution, well‐defined comb‐like amphiphilic copolymers are reported in this work. The copolymers are composed of poly(methyl methacrylate‐co‐2‐hydroxyethyl methacrylate) (P(MMA‐co‐HEMA)) as the backbones and poly(2‐(dimethylamino)ethyl methacrylate) (PDMAEMA) as the grafted chains, with the copolymer backbones being synthesized via atom‐transfer radical polymerization (ATRP) and the grafted chains by oxyanionic polymerization. The copolymers were characterized by gel permeation chromatography (GPC), Fourier‐transform infrared (FT‐IR) spectroscopy and ¹H NMR spectroscopy. The aggregation behavior in aqueous solutions of the comb‐like amphiphilic copolymers was also investigated. ¹H NMR spectroscopic and surface tension measurements all indicated that the copolymers could form micelles in aqueous solutions and they possessed high surface activity. The results of dynamic light scattering (DLS) and scanning electron microscopy (SEM) investigations showed that the hydrodynamic diameters of the comb‐like amphiphilic copolymer aggregates increased with dilution. Because of the protonizable properties of the graft chains, the surface activity properties and micellar state can be easily modulated by variations in pH. Copyright © 2004 Society of Chemical Industry     

Studies on blends of LLDPE and polar polymers compatibilized by a random copolymer

Compatibilization of blends of linear low‐density polyethylene (LLDPE)–poly(methyl methacrylate) (PMMA) and LLDPE–copolymer of methyl methacrylate (MMA) and 4‐vinylpyridine (poly(MMA‐co‐4VP) with poly(ethylene‐co‐methacrylic acid) (EMAA) have been studied. Mechanical properties of the LLDPE–PMMA blends increase upon addition of EMAA. In order to further improve interfacial adhesion of LLDPE and PMMA, 4‐vinyl pyridine units are introduced into PMMA chains, or poly(MMA‐co‐4VP) is used as the polar polymer. In LLDPE–poly(MMA‐co‐4VP)–EMAA blends, interaction of MAA in EMAA with 4VP of poly(MMA‐co‐4VP) causes a band shift in the infrared (IR) spectra. Chemical shifts of N_1s binding energy in X‐ray photoelectronic spectroscopy (XPS) experiments indicate a transfer of proton from MAA to 4VP. Scanning electron microscopy (SEM) pictures show that the morphology of the blends were improved upon addition of EMAA. Nonradiative energy transfer (NRET) fluorescence results attest that there exists interdiffusion of chromophore‐labeled LLDPE chains and chromophore‐labeled poly(MMA‐co‐4VP) chains in the interface. Based on experimental results, the mechanism of compatibilization is studied in detail. Compatibilization is realized through the interaction between MAA in EMAA with 4VP in poly(MMA‐co‐4VP). © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 967–973, 1999     

Functionalized polyethylene on property enhancement of lubricating oil and their performance evaluation study

Methyl methacrylate (MMA) functionalized polyethylene additives for improving the properties of lubricating oil has been investigated in which poly(MMA-co-ethylene) were synthesized by using three different polymerization techniques such as miniemulsion, post polymerization and reverse atom transfer radical polymerization with 1.0 molL −1 of MMA and 20 bar of ethylene pressure. The copolymers are block in nature with the composition of 1:3 molar ratios of ethylene:MMA which is independent of polymerization techniques used. ¹H NMR analysis confirmed the successful incorporation of the copolymers in the lubricating oil. Thermogravimetric analysis reveals that the addition of poly(MMA-co-ethylene) increases thermal stability of the additive doped lubricating oil by approximately 40°C with a single stage decomposition pattern. Flash point measurements show an increasing flash point values for copolymer doped lubricating oil. From rheological study, the viscosity index of base lubricating oil has found significant increases from 102 to 129 with the addition of poly(MMA-co-ethylene) and the higher molecular weight (MW) of this copolymer provides better thickening efficiency. However, copolymer with higher MW seems to be more susceptible to mechanical degradation resulting in lower shear stability whereas copolymer with lower MW acts as a better pour point depressant.     

Synthesis and characterization of novel rod–coil diblock copolymers of poly(methyl methacrylate) and liquid crystalline segments of poly(2,5‐bis[(4‐methoxyphenyl)oxycarbonyl] styrene)

Liquid crystalline diblock copolymers with different molecular weights and low polydispersities were synthesized by atom transfer radical polymerization of methyl methacrylate (MMA) and 2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene (MPCS) monomers. The block architecture (coil‐conformation of MMA segment and rigid‐rod of MPCS segment) of the copolymer was experimentally confirmed by a combination of ¹H nuclear magnetic resonance and gel permeation chromatograph techniques. The liquid crystalline behaviour of the copolymer was studied using differential scanning calorimetry and polarized optical microscope. It was found that the liquid crystalline behaviour was dependent on the number average molecular weight of the rigid segment. Only those copolymers with M_n(GPC) of the rigid block above 9200 g mol^?1 could form liquid crystalline phases higher than the glass transition temperature of the rigid block. The random copolymers MPCS‐co‐MMA were also synthesized by conventional free radical polymerization. The molar content of MPCS in MPCS‐co‐MMA had to be higher than 71% to maintain liquid crystalline behaviour. © 2003 Society of Chemical Industry     

Preparation and characterization of photoreactive copolymers containing curable pendants for positive photoresist

tert‐Butyl methacrylate (TBMA) was copolymerized with various comonomers that were selected from methyl methacrylate (MMA), n‐butyl acrylate (NBA), acrylic acid (AA), and 2‐hydroxyethyl methacrylate (HEMA). From film physical properties, poly(TBMA‐co‐HEMA) and poly(TBMA‐co‐AA‐co‐NBA), were selected as resin binders. To introduce unsaturated double bonds onto the side chain of copolymers, they were further functionalized with acryloyl chloride and glycidyl methacrylate. Copolymers synthesized in this investigation were all identified by using FTIR and NMR. The thermal decomposition temperature of functionalized poly(TBMA‐co‐HEMA) showed obvious difference before and after crosslinking. Adding a small amount of EGDMA as the crosslinking agent could increase the degree of crosslinking and obviously improve the physical properties. Functionalized poly(TBMA‐co‐HEMA) was used as a binder resin and composed with a photoacid generator for positive photoresists. From exposure characteristics, the optimal lithographic condition was achieved when exposed for 90 s, PEB at 100°C for 2.5 min, and developed in 10 wt % Na₂CO₃ developer for 30 s. After completing the lithography process, the residual pattern of positive photoresist was further treated at 140°C for 30 min to cure the pendant unsaturated groups. The resolution of the positive photoresist was analyzed by an optical microscope and SEM technique. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 328–333, 2001     

Dispersion polymerization of MMA in supercritical CO2 in the presence of poly(poly(ethylene glycol) methacrylate-co-1H,1H,2H,2H-perfluorooctylmethacrylate)

Various random copolymers of poly(poly(ethylene glycol) methacrylate-co-1H,1H,2H,2H-perfluorooctylmethacrylate) (p(PEGMA-co-FOMA)) with different poly(ethylene glycol) (PEG) chain length (M_n = 300, 475, and 1100) and different FOMA content have been synthesized in supercritical carbon dioxide (scCO₂) via free-radical polymerization. The copolymers containing above 50 wt% FOMA could be used as a stabilizer for the polymerization of methyl methacrylate (MMA) in scCO₂. For PEGMA (300) and PEGMA (475) copolymers, the copolymeric stabilizer with 67–69 wt% FOMA content was shown to be optimal to produce micrometer-size spherical PMMA powder. The size of pendant PEG group and the composition of copolymer as well as the concentration of MMA affected on the size of PMMA particles and the stability of PMMA latexes in CO₂.     

Properties of n‐butyl methacrylate copolymer latex films derived from crosslinked latex particles

Films obtained from copolymer latexes of n‐butyl methacrylate (BMA) with a series of crosslinking monomers [i.e., a macromonomer crosslinker (Mac), ethylene glycol dimethacrylate (EGDMA), and aliphatic urethane acrylate] exhibited differences in their tensile properties and swelling behaviors. For P(BMA‐co‐EGDMA) copolymer, a dependence on the initiator type was obtained. It is postulated that the network microstructures for the various copolymers evolved as the result of the copolymerization reactions between the monomer pairs during the synthesis in the miniemulsion free‐radical copolymerization. These network microstructures are, therefore, hypothesized to influence the mechanical properties of the resultant films. Copolymers prepared with Mac were tough in comparison with copolymers made with EGDMA. The presence of longer linear or lightly crosslinked poly(n‐butyl methacrylate) (PBMA) chains and the looseness of the crosslinked network structures in the PBMA‐co‐Mac copolymers appear to be the factors responsible for the differences. All of the copolymer films disintegrated into swollen individual microgels when they were immersed in tetrahydrofuran. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 42–49, 2003