A survey of MAC protocols proposed for wireless ATM

Wireless ATM (W-ATM) networks have been studied extensively. The extension of ATM network services to the wireless environment faces many interesting problems. The original ATM network was designed for high-speed noiseless, reliable channels. None of these characteristics are applicable to the wireless channel. One of the most critical aspects of a W-ATM network is the medium access control (MAC) protocol used by mobile terminals (MTs) to request service from the base station (BS), which has to consider the quality of service (QoS) of the specific application. In this article the authors analyze some MAC protocols, particularly those for TDMA systems, and discuss their advantages and disadvantages     

Mobility support for IP over wireless ATM

A wireless ATM system consists of a core network infrastructure that provides mobility support to end terminals and a wireless access link. This article outlines two schemes for supporting mobility of IP terminals in this network. In the first scheme, location management and handoff support is integrated within the ATM signaling and control framework (“mobile ATM”), and mobility is transparently supported at the IP layer by mobile ATM underneath. In the second approach, the IP protocol stack is directly executed on ATM switches (without an intermediate ATM signaling stack) using an IP switching technique called IPSOFACTO (IP Switching Over Fast ATM Cell Transport), and terminal mobility is supported via mobile IP     

Mobility management in wireless ATM networks

Mobile ATM offers a common wired network infrastructure to support mobility of wireless terminals, independent of the wireless access protocol. In addition, it allows seamless migration to future wireless broadband services, such as wireless ATM, by enabling mobility of end-to-end ATM connections. In spite of the diversity in mobile networking technologies (e.g., cellular telephony, mobile-IP, packet data services, PCS), all of them require two fundamental mechanisms: location management and handoff. This article describes different schemes for augmenting a wired ATM network to support location management of mobile terminals and handoff protocols for rerouting a connection data path when the endpoint moves. A prototype implementation of mobile ATM integrating mobility support with ATM signaling and connection setup, is presented. It shows how mobile ATM may be used to provide mobility support to an IP terminal using non-ATM wireless access     

Traffic profiles in ATM networks

A lot of studies have been made to characterize and model sources of ATM traffic (voice, data, video) and to evaluate the performance of a multiplexer whose input is a superposition of these sources, using different methods and techniques (fluid flow, matrix-analytic, etc.). However, in order to better understand the end-to-end performance of ATM connections, characterizations and models of ATM traffic inside the network (i.e. after passage through one or more network elements) are needed. In this paper we intend to study the following problems: (i) Traffic profile of an ATM connection after being policed, in particular worst case traffic, and evaluation of the performance of the related statistical multiplexer. (ii) Traffic profile of the output of a multiplexer (characterized by means of the interdeparture time distribution and the index of dispersion for counts and the index of dispersion for interarrival times). (iii) Traffic profile of a single connection after passing a multiplexer. The aim is to obtain useful characterizations and models of ATM traffic in order to evaluate the performance and the efficiency of ATM network elements and of traffic control functions.This work was supported in part by the Commission of the European Communities, under project RACE R2024 (Research and Development on Advanced Communications in Europe) on Broadband Access Facilities.     

无线ATM/IPOA的移动性支持

无线 ATM (WATM)能够对终端和无线接入连接提供移动性支持。文中论述了无线 ATM的网络结构 ,无线ATM的位置管理、越区切换 ,并提出 IPOA (IP Over ATM)支持移动性的两种方法。     

Low-latency handover in a wireless ATM LAN

The micro- and picocellular architectures proposed for wireless ATM LANs lead to wireless terminals frequently changing their point of attachment to the network. Because ATM connections have quality of service (QoS) guarantees which must be maintained, handover must be as seamless as possible. We present a novel architecture and protocol which primarily aims to keep the interruption period due to handover low, rather than seeking to keep the process entirely lossless. We compare the tradeoffs made, with those in other schemes from the literature, and give quantitative results from an implementation of our scheme on a 10 Mbits/s^-1 prototype wireless ATM LAN     

Wireless ATM networks: technology status and future directions

The concept of “wireless ATM” (WATM), first proposed in 1992, is now being actively considered as a potential framework for new-generation wireless communication networks capable of supporting integrated, quality-of service (QoS) based multimedia services. In this review paper, we outline the technological rationale for wireless ATM, present a system-level architecture, and discuss key design issues for both mobile ATM switching infrastructure and radio access subsystems. The WATM radio access layer issues covered in this paper include: spectrum allocation; spectrum etiquette; modem technology; and medium access/data link control (MAC/DLC) protocols. Mobile ATM aspects such as ATM signaling extensions for handoff control, location management, and mobile QoS control are discussed. A summary of current wireless/mobile ATM technology development and standardization status is given, including an outline of our WATMnet prototype. The paper concludes with a discussion of future directions for wireless ATM technology such as Internet protocol (IP) integration and mobile multimedia terminals/applications     

DELAY JITTER OF A PERIODIC CELL STREAM THROUGH AN ATM MULTIPLEXER IN A BURSTY TRAFFIC ENVIRONMENT

The periodic cell stream is a very important member among the input traffic sources in ATM networks. In this paper, a finite-buffered ATM multiplexer with traffic sources composed of a periodic cell stream, multiple i.i.d Bernoulli cell streams and bursty two-state Markov Modulated Bernoulli Process (MMBP) cell streams is exactly analyzed. The probability mass function of queuing delay, the autocorrelation and power spectrum of delay jitter for this periodic cell stream are derived. The analysis is used to expose the behavior of delay jitter for a periodic cell stream through an ATM multiplexer in a bursty traffic environment. The simulation results indicate that the analytical results are accurate.     

Wireless ATM LAN with and without infrastructure

We consider wireless ATM concepts for small LANs, especially for SOHO and future consumer applications. We describe a wireless ATM LAN framework architecture that supports wireless ATM communications in environments with and without fixed ATM infrastructure. For the configuration with an ATM infrastructure, a distributed ATM switched backbone is proposed, which enables a smart ATM switching element to be embedded in every wireless and fixed access point. For bandwidth efficiency and ease of operation (place-and-play), we also propose an ad hoc wireless ATM LAN concept based on the same 5 GHz wireless ATM air interface as is currently under standardization in the ETSI/BRAN and ATM Forum. Unlike CSMA-based ad hoc systems such as HIPERLAN and IEEE802.11, our ad hoc wireless ATM system makes QoS management feasible in an infrastructureless environment by using resource reservation and scheduled medium access protocol. Since cost scalability is essential throughout our system design, we consider forwarding between ad hoc subnets and interworking with the fixed network as important but optional features     

Voice over ATM using AAL2 and bit dropping: performance and calladmission control

Asynchronous transfer mode (ATM) adaptation layer 2 (AAL2) has been designed for efficient transport of voice, fax, and voiceband data (VBD) traffic over an ATM virtual circuit. The protocol helps achieve low latency and high bandwidth efficiency while applying suitable compression methods on voice/VBD/fax calls and silence elimination on voice calls. We analyze the performance and capacity of an ATM multiplexer based on AAL2 adaptation. We assume that embedded adaptive differential pulse code modulation (ADPCM) is used to compress voice, and silence elimination is used to achieve statistical multiplexing gain. The embedded ADPCM coding scheme allows selective dropping of less significant bits of voice during congestion in the ATM/AAL2 multiplexer. We compare the call capacities of voice multiplexers with and without bit dropping (BD). The performance models and results presented are based on fairly general assumptions and can be used for traffic engineering and call admission control in land-line or wireless ATM systems for a variety of voice/voiceband compression algorithms. A generalized algorithm for call admission control is also described