共查询到17条相似文献,搜索用时 161 毫秒
1.
2.
基于SOI平台的硅基集成光学器件具有高带宽、低功耗、低延迟等优点,为实现片上光互连网络提供了一种可行的技术方案。光学路由器是片上光互连网络中负责节点数据交换的重要器件。介绍了国内外光学路由器的最新研究进展,并着重介绍了利用微环谐振器和马赫-曾德尔光开关构建N端口无阻塞光学路由器的一般性原理,进行了统计分析和仿真结果显示,应用一般性原理构建的光学路由器与之前已报道过的同规模光学路由器相比在开关个数、插入损耗、平均功耗等方面的性能均有所提升。 相似文献
3.
4.
5.
6.
7.
8.
Crossbar光交换网络 总被引:1,自引:0,他引:1
Crossbar网络是实现高速并行光学处理的一种最重要而有效的光交换网络结构。作为一种无阻塞网络,Crossbar网络具有简单性,易于实现控制,适合于构成光开关矩阵。总结和分析了近20多年来发展的Crossbar光交换网络,介绍了不同Crossbar光交换网络的原理、结构和性能,分析了Crossbar光交换网络的关键技术。目前光学互连网络的发展方向是实现集成大规模光互连。可以预见光学互连网络会朝着更加实用化的方向发展,并在其应用领域发挥越来越重要的作用。 相似文献
9.
10.
首先介绍一种洗牌型自由空间光互连多层全互连神经网络模型。该模型的高神经元/权重比可以极大地压缩神经网络的互连权矩阵IWM(interconnectweightmatrix)。对于具有N2个神经元的单层二维全互连神经网络的IWM为N2×N2,而洗牌型全互连神经网络的IWM仅为4N2log2N。另外,洗牌型全互连神经网络整齐、简单的结构方便了网络的综合,特别是网络隐单元的综合,并且十分适合于神经网络的光学实现。然后描述了采用数字光技术实现光互连的洗牌型神经网络的系统模型、关键芯片结构以及关键技术。本文提出的模型和方法使实现与人脑神经网络规模(104量级)相当的实用化自适应光电子全互连神经网络成为可能。 相似文献
11.
12.
13.
高效视频编码(HEVC)标准在提升编码性能的同时,对系统带宽提出了更高的要求。传统电互连方式存在带宽小和时延大的问题,而光互连的高带宽和低功耗为片上资源数据通信提出了新的解决方案。然而由于工艺水平的限制,集成光器件无法在现场可编程门阵列(FPGA)芯片内部实现。采用片外光器件模拟片上光互连系统可以达到原型验证的目的。文章基于BEE4开发平台在单片上采用电互连方式进行数据通信,在Xilinx V6系列芯片间通过接入4通道小型可插拔+(QSFP+)光模块搭建光通信链路,构建光通信网络,实现了光电混合互连网络原型系统。以分辨率176×144的标准测试序列akiyoqcif176×144.yuv为例进行测试,实验结果表明,以光链路替代片间电通信能够正确实现,且板间传输时间仅为电互连的一半,综合频率为51.327 MHz。 相似文献
14.
Ge Zhou Yimo Zhang Wei Liu 《Proceedings of the IEEE. Institute of Electrical and Electronics Engineers》2000,88(6):856-863
In this paper, we discuss the optical fiber interconnection technologies applied in the two types of parallel processing systems: 1) a backplane interconnection in a parallel processor array system and 2) a computing cluster network. We have set up a parallel processor array system using optical fiber to make point-to-point interconnection between processor elements and are developing a low-cost virtual parallel optical fiber interconnection link (VPOFLink) complying with peripheral component interconnect (PCI) local bus specifications for the computing cluster. VPOFLink is integrated with the popular PCI bus interface in order to make the link hold the same bandwidth as that of the PCI bus. It was fabricated as an available peripheral device that can been inserted into the bus slots of commercial computers directly and can operate under the control of PCI bus. Also in this paper, we demonstrate the optical fiber link for a ring network and the architecture of the ring network 相似文献
15.
用于机群系统的高速光互连网络接口卡设计 总被引:10,自引:4,他引:6
本文在已设计完成的用于计算机点到虚拟并行互连的光互连链路基础上,用现场可编程门阵列(FPGA)器件实现了数据的寻址和转发,设计完成了具有硬件器由功能的光互连环网的网络接口卡。该网络接口卡的旁路数据转发延迟为210ns,目的结点的数据接收处理延迟为350ns。 相似文献
16.
人们对无线宽带通信技术的需求在近些年稳步增长.无线电波频谱的带宽限制和频带拥堵,通过微波无线网络的发展已经有了明显的改善.然而,无线光互连技术才能使得数据传输带宽达到理想的要求.作为许多无线通讯系统的最终方案,无线光互连也被选择为长期的解决策略.并且,无线光互连的大量优势还没有得到完全的发掘,许多基础性和应用性的研究还需要在实验层面和商业应用层面加以深入.国外,Gb/s的无线光传输已经在实验室中得到了验证,然而,可用的室内无线光互连系统也仅仅达到了155Mb/s的速度.下面将着重从收发系统、性能及安全性方面对无线光互连技术作一概况阐述. 相似文献
17.
There has been much interest in using optics to implement computer interconnection networks. However, there has been little discussion of any renting methodologies besides those already used in electronics. In this paper, a neural network routing methodology is proposed that can generate control bits for a broad range of optical multistage interconnection networks (OMIN's). Though we present no optical implementation of this methodology, we illustrate its control for an optical interconnection network. These OMIN's can be used as communication media for distributed computing systems. The routing methodology makes use of an artificial neural network (ANN) that functions as a parallel computer for generating the routes. The neural network routing scheme can be applied to electrical as well as optical interconnection networks. However, since the ANN can be implemented using optics, this routing approach is especially appealing for an optical computing environment. Although the ANN does not always generate the best solution, the parallel nature of the ANN computation may make this routing scheme faster than conventional routing approaches, especially for OMIN's that have an irregular structure. Furthermore, the ANN router is fault-tolerant. Results are shown for generating routes in a 16×16, 3-stage OMIN 相似文献