首页 | 官方网站   微博 | 高级检索  
相似文献
 共查询到10条相似文献,搜索用时 78 毫秒
1.
提出了一种新型宽频带2×2方形缝隙槽圆极化天线阵。天线阵包含一个连续旋转馈电结构、4个非对称U型馈电枝节和一个方形槽接地板。与传统圆极化天线阵所采用的L型馈电枝节不同,首次提出了一种新型非对称U形馈电枝节来改善天线的圆极化性能。利用这些枝节和缝隙槽作为微扰元素,缝隙槽天线阵可以激发多重圆极化谐振模式,进而产生宽频带的圆极化辐射。测试结果表明,该天线阵3 dB轴比带宽为81.3%(1.75~4.15 GHz)而10 dB回波损耗达到88.6%(1.96~5.08 GHz)。此天线阵具有宽频带特性,在WLAN(2.4~2.48 GHz)和WiBro(2.3~2.39 GHz)等无线通信系统中有潜在的应用前景。  相似文献   

2.
Cryan  M.J. Hall  P.S. 《Electronics letters》1996,32(4):286-287
The authors present results for a novel two element active transmit-receive array using dual linear polarisation and sequential rotation. Each element includes an integrated oscillator and amplifier mounted on orthogonal edges of a square patch, such that transmit and receive paths are isolated and polarisation duplexed. The array gives in excess of 55 dB transmit-receive isolation at 3.77 GHz  相似文献   

3.
《Electronics letters》2008,44(25):1439-1441
A simple and successful design of a printed aperture antenna array is presented in view of high-speed millimetre-wave wireless access applications. The antenna element design is based on a broadband travelling- wave aperture antenna for circularly-polarised radiation. For the antenna array design, the sequential rotation scheme is employed for improving the co-polarised gain and axial ratio. The presented antenna array is designed in the 40?48 GHz band and implemented with a 5mil-thick RT/Duroid-5880 PCB. Promising performances are achieved, including a return loss (,10 dB) bandwidth of 32%, an axial ratio (,3 dB) bandwidth of 25%, and a co-polarised gain (flatness , 3 dB) bandwidth of 32% with a maximum gain of 11dBic.  相似文献   

4.
Circularly polarized (CP) dielectric resonator antenna (DRA) subarrays have been numerically studied and experimentally verified. Elliptical CP DRA is used as the antenna element, which is excited by either a narrow slot or a probe. The elements are arranged in a 2 by 2 subarray configuration and are excited sequentially. In order to optimize the CP bandwidth, wideband feeding networks have been designed. Three different types of feeding network are studied; they are parallel feeding network, series feeding network and hybrid ring feeding network. For the CP DRA subarray with hybrid ring feeding network, the impedance matching bandwidth (S11<-10 dB) and 3-dB AR bandwidth achieved are 44% and 26% respectively  相似文献   

5.
A novel design of a printed ring-slot antenna with circular polarisation (CP) is first proposed. The CP radiation of the slot antenna is achieved by a series microstrip-line feed configuration. Using the single CP slot antenna as an array element, the 1times2 and 2times2 slot arrays are constructed and measured. To obtain wider CP bandwidth, phase sequential rotation technique is applied to the feed network of these printed slot arrays. The experimental results show that the 2times2 slot array antenna is capable of 15% bandwidth for an axial ratio of less than 3 dB  相似文献   

6.
A novel four-beam antenna array fed by a modified 4/spl times/8 Butler matrix is proposed. Four 180/spl deg/ directional couplers in conjunction with a 4/spl times/4 Butler matrix are applied to provide a tapered excitation of a linear eight-element switched-beam antenna array. Sidelobes as low as -20 dB for all four beams have been both theoretically and experimentally achieved. A proposed technique of antenna element rotation simplifies the design of a feeding network.  相似文献   

7.
A planar antenna array, based on nine identical quasi-Yagi elements, is presented in this paper. Contrary to conventional designs, the feeding network is composed of three-way power dividers, which are carefully designed in order to provide synchronized output signals over a wide frequency range. The use of spline-shaped microstrip lines suppresses coupling effects by parallel lines. Thus, signal distortions within the feeding network are minimized. Compared to conventional designs with eight elements, the additional antenna element will enhance the gain of the array, which is between 10.5 dBi and 13 dBi in the X band. The input return loss of the antenna array is below -15 dB over most parts of the relevant spectrum, with a total bandwidth of 45%. The planar antenna array is well suited as a radiating element in linear phased arrays for multifunction radars, including SAR and MTI. Additionally, the suitability of this antenna for phased-array applications is studied by an experimental setup consisting of five antenna plates.  相似文献   

8.
A TX/RX dual microstrip 8/spl times/4 array antenna for satellite communication is designed, fabricated and measured and its element characteristics are analysed using finite difference time domain (FDTD) method. TX/RX frequency ranges are 14.0-14.5 GHz, 11.7-12.75 GHz, respectively, and vertical and horizontal polarisations are used for TX and RX. This antenna uses microstrip direct feeding for RX and aperture coupled stripline feeding for TX and accommodates stacked elements for a high directivity and wide impedance bandwidth. FDTD gives more accurate results because of the consideration of finite structure and two imperfect ground planes. This element has a return loss below -8 and -14 dB over the TX and RX frequency ranges and a gain of 7.5 and 8.3 dBi at the centre frequency of TX and RX. Return loss below -10 and -14 dB and a gain of 21.4 and 20.0 dBi were achieved for the TX and RX array, respectively.  相似文献   

9.
An array antenna consisting of dual-loop slot elements with a simple feeding system is realised. Each dual-loop element has two loop slots that are simultaneously fed by a single triplate transmission line. A narrowed beam, of circular polarisation, with an axial ratio of less than 3 dB, is obtained over a 3% bandwidth. The measured radiation pattern agrees well with a pattern calculated using array theory.<>  相似文献   

10.
分析了一种具有高增益的宽带圆极化天线。每一个单元都是双面印刷偶极子,为了展宽带宽,采用了宽频带90°巴伦作为馈电网络用于给偶极子阵列馈电。在此基础上,制作了一个2×3 元小型圆极化平面阵,为了压缩尺寸,将馈电网络位于介质板的底层,该天线最高增益可以达到14.2dBi,并可以获得64%(VSWR<2)的阻抗带宽和54.5%(AR<3) 的轴比带宽。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号