Simultaneously Achieved High Open‐Circuit Voltage and Efficient Charge Generation by Fine‐Tuning Charge‐Transfer Driving Force in Nonfullerene Polymer Solar Cells

To maximize the short‐circuit current density (J_SC) and the open circuit voltage (V_OC) simultaneously is a highly important but challenging issue in organic solar cells (OSCs). In this study, a benzotriazole‐based p‐type polymer (J61) and three benzotriazole‐based nonfullerene small molecule acceptors (BTA1‐3) are chosen to investigate the energetic driving force for the efficient charge transfer. The lowest unoccupied molecular orbital (LUMO) energy levels of small molecule acceptors can be fine‐tuned by modifying the end‐capping units, leading to high V_OC (1.15–1.30 V) of OSCs. Particularly, the LUMO energy level of BTA3 satisfies the criteria for efficient charge generation, which results in a high V_OC of 1.15 V, nearly 65% external quantum efficiency, and a high power conversion efficiency (PCE) of 8.25%. This is one of the highest V_OC in the high‐performance OSCs reported to date. The results imply that it is promising to achieve both high J_SC and V_OC to realize high PCE with the carefully designed nonfullerene acceptors.     

Near‐Infrared Small Molecule Acceptor Enabled High‐Performance Nonfullerene Polymer Solar Cells with Over 13% Efficiency

One of the most promising approaches to achieve high‐performance polymer solar cells (PSCs) is to develop nonfullerene small molecule acceptors (SMAs) with an absorption extending to the near‐infrared (NIR) region. In this work, two novel SMAs, namely, BTTIC and BTOIC, are designed and synthesized, with optical bandgaps (E_g^opt) of 1.47 and 1.39 eV, respectively. Desipte the narrow E_g^opt, the PBDB‐T:BTTIC‐ and PBDB‐T:BTOIC‐based PSCs can maintain high V_OCs of over 0.90 and 0.86 V, respectively, with low energy losses (E_loss) < 0.6 eV. Meanwhile, due to the favorable morphology of the PBDB‐T:BTTIC blend, balanced carrier mobilities are achieved. The high external quantum efficiencies enable a high power conversion efficiency (PCE) up to 13.18% for the PBDB‐T:BTTIC‐based PSCs. In comparison, BTOIC shows an excessive crystallization propensity owing to its oxyalkyl side groups, which eventually leads to a relatively low PCE for the PBDB‐T:BTOIC‐based PSCs. Overall, this work provides insights into the design of novel NIR‐absorbing SMAs for nonfullerene PSCs.     

Molecular Consideration for Small Molecular Acceptors Based on Ladder‐Type Dipyran: Influences of O‐Functionalization and π‐Bridges

Molecular engineering of nonfullerene acceptors (NFAs) plays a vital role in the development of organic photovoltaics. Oxygen as an electron donating atom is incorporated into the NFA system as alkoxyl forms at central, terminal, or central conjugated moieties due to the tunability at structural conformation, solubility, electron donating ability, absorption, energy levels, etc. In this work, a novel dipyran‐based ladder‐type building block ( Ph‐DTDP ), which possesses two oxygen atoms in the conjugated skeleton, is designed and facilely synthesized. It is applied as the donor core for the acceptor–donor–acceptor‐type NFA design and such functionalized‐O efficiently enhances the electron donating ability, lowers the band gap, redshifts and extends the absorption spectra. In addition, the π‐bridge effects are considered as well. Photovoltaic performances are systematically investigated and a high power conversion efficiency of 9.21% can be afforded with an energy loss of 0.57 eV. Meanwhile, the morphologies as well as the carrier mobilities of the blend films are studied to assist further understanding of the structure–property relationships. Overall, the study in this work provides a new promising ladder‐type dipyran building block and brings in a novel way to use oxygen in NFA molecular structure design.     

Small-molecule acceptors with long alkyl chains for high-performance as-cast nonfullerene organic solar cells

Three fused-ring small-molecule electron acceptors, IDTC16-IC, IDTC16-Th, and IDTC16-4F, were designed and synthesized by introducing indacenodithiophene (IDT) as the electron-donating core and 2-(3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (IC), fluorinated IC, and a thiophene-based unit as the electron-withdrawing end group. Here, instead of the commonly used n-hexyl or n-hexylphenyl side chains, n-hexadecyl peripheral substituents were employed at the IDT core to study the influence of alkyl groups on photovoltaic performance of the nonfullerene acceptors. The introduction of flexible n-hexadecyl group endowed the three acceptors with excellent solubility in common organic solvents. All the three acceptors presented strong absorption ranging from 450 nm to 720 nm in solution with high molar extinction coefficients. As a result, the as-cast organic solar cells (OSCs) based on IDTC16-IC and the wide bandgap polymer donor PM6 exhibited a power conversion efficiency (PCE) of 5.12%. The OSCs based on PM6:IDTC16-Th and PM6:IDTC16-4F showed much better photovoltaic performance with PCEs of 8.76% and 8.55%, respectively. The PCE values were improved to 5.89%, 9.09%, and 9.42% for the PM6:IDTC16-IC, PM6:IDTC16-Th, and PM6:IDTC16-4F OSCs, respectively, with the addition of the solvent additive 1,8-diiodooctane. These findings demonstrate that the combination of alkyl chains at the fused rings and fluorination or aromatic structure change of the terminal groups leads to greatly enhanced photovoltaic performance of nonfullerene acceptors through improving the photophysical, molecular orbital, and film morphological properties.     

Naphtho[1,2‐c:5,6‐c′]bis[1,2,5]thiadiazole‐Containing π‐Conjugated Compound: Nonfullerene Electron Acceptor for Organic Photovoltaics

The development of nonfullerene acceptor materials applicable to organic photovoltaics (OPVs) has attracted considerable attention for the achievement of a high power conversion efficiency (PCE) in recent years. However, it is still challenging due to the insufficiency of both the variety of effective electron‐deficient units and certain guidelines for the design of such materials. This work focusses on naphtho[1,2‐c:5,6‐c′]bis[1,2,5]thiadiazole (NTz) as a key electron‐deficient unit. Therefore, a new electron‐accepting π‐conjugated compound (NTz‐Np), whose structure is based on the combination of NTz and the fluorene‐containing imide‐annelated terminal units (Np), is designed and synthesized. The NTz‐Np compound exhibits a narrow optical energy gap (1.73 eV), a proper energy level (?3.60 eV) of the lowest unoccupied molecular orbital, and moderate electron mobility (1.6 × 10^?5 cm² V^?1 s^?1), indicating that NTz‐Np has appropriate characteristics as an acceptor against poly(3‐hexylthiophene) (P3HT), a representative donor. OPV devices based on NTz‐Np under the blend with P3HT show high photovoltaic performance with a PCE of 2.81%, which is the highest class among the P3HT/nonfullerene‐based OPVs with the conventional device structure. This result indicates that NTz unit can be categorized as a potential electron‐deficient unit for the nonfullerene acceptors.     

Highly Efficient Ternary Solar Cells with Efficient Förster Resonance Energy Transfer for Simultaneously Enhanced Photovoltaic Parameters

Introducing a third component into organic bulk heterojunction solar cells has become an effective strategy to improve photovoltaic performance. Meanwhile, the rapid development of non-fullerene acceptors (NFAs) has pushed the power conversion efficiency (PCE) of organic solar cells (OSCs) to a higher standard. Herein, a series of fullerene-free ternary solar cells are fabricated based on a wide bandgap acceptor, IDTT-M, together with a wide bandgap donor polymer PM6 and a narrow bandgap NFA Y6. Insights from the morphological and electronic characterizations reveal that IDTT-M has been incorporated into Y6 domains without disrupting its molecular packing and sacrificing its electron mobility and work synergistically with Y6 to regulate the packing pattern of PM6, leading to enhanced hole mobility and suppressed recombination. IDTT-M further functions as an energy-level mediator that increases open-circuit voltage (V_OC) in ternary devices. In addition, efficient Förster resonance energy transfer (FRET) between IDTT-M and Y6 provides a non-radiative pathway for facilitating exciton dissociation and charge collection. As a result, the optimized ternary device features a significantly improved PCE up to 16.63% with simultaneously enhanced short-circuit current (J_SC), V_OC, and fill factor (FF).     

Asymmetric Acceptors with Fluorine and Chlorine Substitution for Organic Solar Cells toward 16.83% Efficiency

Small‐molecule acceptors (SMAs)‐based organic solar cells (OSCs) have exhibited great potential for achieving high power conversion efficiencies (PCEs). Meanwhile, developing asymmetric SMAs to improve photovoltaic performance by modulating energy level distribution and morphology has drawn lots of attention. In this work, based on the high‐performance SMA (Y6), three asymmetric SMAs are developed by substituting the fluorine atoms on the terminal group with chlorine atoms, namely SY1 (two F atoms and one Cl atom), SY2 (two F atoms and two Cl atoms), and SY3 (three Cl atoms). Y6 (four F atoms) and Y6‐4Cl (four Cl atoms) are synthesized as control molecules. As a result, SY1 exhibits the shallowest lowest unoccupied molecular orbital energy level and the best molecular packing among these five acceptors. Consequently, OSCs based on PM6:SY1 yield a champion PCE of 16.83% with an open‐circuit voltage (V_OC) of 0.871 V, and a fill factor (FF) of 0.760, which is the best result among the five devices. The highest FF for the PM6:SY1‐based device is mainly ascribed to the most balanced charge transport and optimal morphology. This contribution provides deeper understanding of applying asymmetric molecule design method to further promote PCEs of OSCs.     

Enhanced Light‐Harvesting Capability of a Panchromatic Ru(II) Sensitizer Based on π‐Extended Terpyridine with a 4‐Methylstylryl Group for Dye‐Sensitized Solar Cells

A novel Ru π‐expanded terpyridyl sensitizer, referred to as HIS‐2, is prepared based on the molecular design strategy of substitution with a moderately electron‐donating 4‐methylstyryl group onto the terpyridyl ligand. The HIS‐2 dye exhibits a slightly increased metal‐to‐ligand charge transfer (MLCT) absorption at around 600 nm and an intense π–π* absorption in the UV region compared with a black dye. Density functional theory calculations reveal that the lowest unoccupied molecular orbital (LUMO) is distributed over the terpyridine and 4‐methylstyryl moieties, which enhances the light‐harvesting capability and is appropriate for smooth electron injection from the dye to the TiO₂ conduction band. The incident photon‐to‐electricity conversion efficiency spectrum of HIS‐2 exhibits better photoresponse compared with black dye over the whole spectral region as a result of the extended π‐conjugation. A DSC device based on black dye gives a short‐circuit current (J_SC) of 21.28 mA cm^?2, open‐circuit voltage (V_OC) of 0.69 V, and fill factor (FF) of 0.72, in an overall conversion efficiency (η) of 10.5%. In contrast, an HIS‐2 based cell gives a higher J_SC value of 23.07 mA cm^?2 with V_OC of 0.68 V, and FF of 0.71, and owing to the higher J_SC value of HIS‐2, an improved η value of 11.1% is achieved.     

A Chlorinated Donor Polymer Achieving High-Performance Organic Solar Cells with a Wide Range of Polymer Molecular Weight

In the field of non-fullerene organic solar cells (OSCs), compared to the rapid development of non-fullerene acceptors, the progress of high-performance donor polymers is relatively slow. The property and performance of donor polymers in OSCs are often sensitive to the molecular weight of the polymers. In this study, a chlorinated donor polymer named D18-Cl is reported, which can achieve high performance with a wide range of polymer molecular weight. The devices based on D18-Cl show a higher open-circuit voltage (V_OC) due to the slightly deeper energy levels and an outstanding short-circuit current density (J_SC) owing to the appropriate long periods of blend films and less ([6,6]-phenyl-C71-butyric acid methyl ester) (PC₇₁BM) in mixed domains, leading to the higher efficiency of 17.97% than those of the D18-based devices (17.21%). Meanwhile, D18-Cl can achieve high efficiencies (17.30–17.97%) when its number-averaged molecular weight (M_n) is ranged from 45 to 72 kDa. In contrast, the D18-based devices only exhibit relatively high efficiencies in a narrow M_n range of ≈70 kDa. Such property and performance make D18-Cl a promising donor polymer for scale-up and low-cost production.     

High‐Performance Pseudoplanar Heterojunction Ternary Organic Solar Cells with Nonfullerene Alloyed Acceptor

The vast majority of ternary organic solar cells are obtained by simply fabricating bulk heterojunction (BHJ) active layers. Due to the inappropriate distribution of donors and acceptors in the vertical direction, a new method by fabricating pseudoplanar heterojunction (PPHJ) ternary organic solar cells is proposed to better modulate the morphology of active layer. The pseudoplanar heterojunction ternary organic solar cells (P‐ternary) are fabricated by a sequential solution treatment technique, in which the donor and acceptor mixture blends are sequentially spin‐coated. As a consequence, a higher power conversion efficiency (PCE) of 14.2% is achieved with a V_oc of 0.79 V, J_sc of 25.6 mA cm^?2, and fill factor (FF) of 69.8% compared with the ternary BHJ system of 13.8%. At the same time, the alloyed acceptor is likely formed between two the acceptors through a series of in‐depth explorations. This work suggests that nonfullerene alloyed acceptor may have great potential to realize effective P‐ternary organic solar cells.     

Molecular Orientation Unified Nonfullerene Acceptor Enabling 14% Efficiency As‐Cast Organic Solar Cells

Molecular orientation and π–π stacking of nonfullerene acceptors (NFAs) determine its domain size and purity in bulk‐heterojunction blends with a polymer donor. Two novel NFAs featuring an indacenobis(dithieno[3,2‐b:2?,3?‐d]pyrrol) core with meta‐ or para‐alkoxyphenyl sidechains are designed and denoted as m‐INPOIC or p‐INPOIC , respectively. The impact of the alkoxyl group positioning on molecular orientation and photovoltaic performance of NFAs is revealed through a comparison study with the counterpart ( INPIC‐4F ) bearing para‐alkylphenyl sidechains. With inward constriction toward the conjugated backbone, m‐INPOIC presents predominant face‐on orientation to promote charge transport. The as‐cast organic solar cells (OSCs) by blending m‐INPOIC and PBDB‐T as active layers exhibit a power conversion efficiency (PCE) of 12.1%. By introducing PC₇₁BM as the solid processing‐aid, the ternary OSCs are further optimized to deliver an impressive PCE of 14.0%, which is among the highest PCEs for as‐cast single‐junction OSCs reported in literature to date. More attractively, PBDB‐T: m‐INPOIC :PC₇₁BM based OSCs exhibit over 11% PCEs even with an active layer thickness over 300 nm. And the devices can retain over 95% of PCE after storage for 20 days. The outstanding tolerance to film thickness and outstanding stability of the as‐cast devices make m‐INPOIC a promising candidate NFA for large‐scale solution‐processable OSCs.     

An Amidine‐Type n‐Dopant for Solution‐Processed Field‐Effect Transistors and Perovskite Solar Cells

This study reports an effective amidine‐type n‐dopant of 1,8‐Diazabicyclo[5.4.0]undec‐7‐ene (DBU) that can universally dope electron acceptors, including PC₆₁BM, N2200, and ITIC, by mixing the dopant with the acceptors in organic solvents or exposing the acceptor films in the dopant vapor. The doping mechanism is due to its strong electron‐donating property that is also confirmed via the chemical reduction of PEDOT:PSS (yielding color change). The DBU doping considerably increases the electrical conductivity and shifts the Fermi levels up of the PC₆₁BM films. When the DBU‐doped PC₆₁BM is used as an electron‐transporting layer in perovskite solar cells, the n‐doping removes the “S‐shape” of J–V characteristics, which leads to the fill factor enhancement from 0.54 to 0.76. Furthermore, the DBU doping can effectively lower the threshold voltage and enhance the electron mobility of PC₆₁BM‐based n‐channel field‐effect transistors. These results show that the DBU can be a promising n‐dopant for solution‐processed electronics.     

Open‐Circuit Voltage and Effective Gap of Organic Solar Cells

The open‐circuit voltage (V_OC) of an organic solar cell is limited by the donor‐acceptor material system. The effective gap E_g^eff between the electron affinity of the acceptor and the ionization potential of the donor is usually regarded as the upper limit for V_OC, which is only reached for T → 0 K. This relation is confirmed for a number of small‐molecule bulk heterojunction p‐i‐n type solar cells by varying the temperature and illumination intensity. With high precision, the low temperature limit of V_OC is identical to E_g^eff. Furthermore, the influence of the hole transport material in a p‐doped hole transport layer and the donor‐acceptor mixing ratio on this limit V₀ is found to be negligible. Varying the active material system, the quantitative relation between V₀ and E_g^eff is found to be identity. A comparison of V₀ in a series of nine different donor‐acceptor material combinations opens a pathway to quantitatively determine the ionization potential of a donor material or the electron affinity of an acceptor material.     

Band‐Offset Engineering for Enhanced Open‐Circuit Voltage in Polymer–Oxide Hybrid Solar Cells

The power conversion efficiency of organic and hybrid solar cells is commonly reduced by a low open‐circuit voltage (V_OC). In these cases, the V_OC is significantly less than the energy of the lowest energy absorbed photon, divided by the elementary charge q. The low photovoltage originates from characteristically large band offsets between the electron donor and acceptor species. Here a simple method is reported to systematically tune the band offset in a π‐conjugated polymer–metal oxide hybrid donor–acceptor system in order to maximize the V_OC. It is demonstrated that substitution of magnesium into a zinc oxide acceptor (ZnMgO) reduces the band offset and results in a substantial increase in the V_OC of poly(3‐hexylthiophene) (P3HT)–ZnMgO planar devices. The V_OC is seen to increase from 500 mV at x = 0 up to values in excess of 900 mV for x = 0.35. A concomitant increase in overall device efficiency is seen as x is increased from 0 to 0.25, with a maximum power‐conversion efficiency of 0.5 % obtained at x = 0.25, beyond which the efficiency decreases because of increased series resistance in the device. This work provides a new tool for understanding the role of the donor–acceptor band offset in hybrid photovoltaics and for maximizing the photovoltage and power‐conversion efficiency in such devices.     

Inverted Organic Solar Cells with Sol–Gel Processed High Work‐Function Vanadium Oxide Hole‐Extraction Layers

For large‐scale and high‐throughput production of organic solar cells (OSCs), liquid processing of the functional layers is desired. We demonstrate inverted bulk‐heterojunction organic solar cells (OSCs) with a sol–gel derived V₂O₅ hole‐extraction‐layer on top of the active organic layer. The V₂O₅ layers are prepared in ambient air using Vanadium(V)‐oxitriisopropoxide as precursor. Without any post‐annealing or plasma treatment, a high work function of the V₂O₅ layers is confirmed by both Kelvin probe analysis and ultraviolet photoelectron spectroscopy (UPS). Using UPS and inverse photoelectron spectroscopy (IPES), we show that the electronic structure of the solution processed V₂O₅ layers is similar to that of thermally evaporated V₂O₅ layers which have been exposed to ambient air. Optimization of the sol gel process leads to inverted OSCs with solution based V₂O₅ layers that show power conversion efficiencies similar to that of control devices with V₂O₅ layers prepared in high‐vacuum.     

Spiro Linkage as an Alternative Strategy for Promising Nonfullerene Acceptors in Organic Solar Cells

This work focuses on developing diketopyrrolopyrrole (DPP)‐based small molecular nonfullerene acceptors for bulk heterojunction (BHJ) organic solar cells. The materials, SF‐DPP s, have an X‐shaped geometry arising from four DPP units attached to a spirobifluorene (SF) center. The spiro‐dimer of DPP‐fluorene‐DPP is highly twisted, which suppresses strong intermolecular aggregation. Branched 2‐ethylhexyl (EH), linear n‐octyl (C8), and n‐dodecyl (C12) alkyl sides are chosen as substituents to functionalize the N,N‐positions of the DPP moiety to tune molecular interactions. SF‐DPPEH , the best candidate in SF‐DPP s family, when blended with poly(3‐hexylthiophene) (P3HT) showed a moderate crystallinity and gives a J_sc of 6.96 mA cm^?2, V_oc of 1.10 V, a fill factor of 47.5%, and a power conversion efficiency of 3.63%. However, SF‐DPPC8 and SF‐DPPC12 exhibit lower crystallinity in their BHJ blends, which is responsible for their reduced J_sc. Coupling DPP units with SF using an acetylene bridge yields SF‐A‐DPP molecules. Such a small modification leads to drastically different morphological features and far inferior device performance. These observations demonstrate a solid structure–property relationship by topology control and material design. This work offers a new molecular design approach to develop efficient small molecule nonfullerene acceptors.     

Small molecule ternary solar cell with two synergistic electron acceptors for enhanced photovoltaic performance

In recent years, tremendous progresses have been achieved for solution processed organic solar cells (OSCs). The strategy of adding a third component to fabricate ternary solar cells has emerged as an effective method to enhance the power conversion efficiency (PCE) of devices. Furthermore, small molecules feature as lower viscosity and excellent repeatability which facilitate the effective morphology control during fabrication process for enhanced photovoltaic performance. Herein, we report a series of ternary solar cells based on a liquid crystal molecule BTR and two electron acceptors of PC₇₁BM and Y6. These molecules show complementary absorption to broaden spectra coverage and form energy levels cascade for efficient charge transfer. Meanwhile, thanks to the improved molecular packing and formed efficient charge transport network in the ternary blend film, the optimal ternary device possesses the improved charge dynamics and suppressed charge recombination. Thus, ternary solar cells deliver the highest PCE of 11.82% with simultaneously enhanced parameters of J_SC, V_OC and FF. This finding further illustrates the important roles of synergistic effect of fullerenes and non-fullerene acceptors in fabricating highly efficient ternary solar cells.     

Ternary Polymer Solar Cells with High Efficiency of 14.24% by Integrating Two Well‐Complementary Nonfullerene Acceptors

Ternary polymer solar cells (PSCs) are one of the most promising device architectures that maintains the simplicity of single‐junction devices and provides an important platform to better tailor the multiple performance parameters of PSCs. Herein, a ternary PSC system is reported employing a wide bandgap polymeric donor (PBTA‐PS) and two small molecular nonfullerene acceptors (labeled as LA1 and 6TIC). LA1 and 6TIC keep not only well‐matched absorption profiles but also the rational crystallization properties. As a result, the optimal ternary PSC delivers a state of the art power conversion efficiency (PCE) of 14.24%, over 40% higher than the two binary devices, resulting from the prominently increased short‐circuit current density (J_sc) of 22.33 mA cm^?2, moderate open‐circuit voltage (V_oc) of 0.84 V, and a superior fill factor approaching 76%. Notably, the outstanding PCE of the ternary PSC ranks one of the best among the reported ternary solar cells. The greatly improved performance of ternary PSCs mainly derives from combining the complementary properties such as absorption and crystallinity. This work highlights the great importance of the rational design of matched acceptors toward highly efficient ternary PSCs.     

Solution‐Processed Bulk‐Heterojunction Solar Cells Based on Monodisperse Dendritic Oligothiophenes

A novel family of soluble conjugated dendritic oligothiophenes (DOTs) as monodisperse 3D macromolecular architectures was characterized with respect to optical and redox properties in solution and in solid films. Band gaps of 2.5–2.2 eV, typical for organic semiconductors, were determined as well as HOMO/LUMO energy levels ideal for efficient electron transfer to acceptors such as [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) identifying them as suitable materials for solar cell applications. Solution‐processed bulk‐heterojunction solar cells using DOTs as electron donor and PCBM as acceptor were prepared and investigated. High open‐circuit voltages V_OC of 1.0 V and power‐conversion efficiencies up to 1.72% were obtained for the DOT‐based devices. The higher generations DOTs provide the highest efficiencies. Based on the monodispersity of the DOTs, an analysis of the molar ratio between donor and acceptor in the blended film was possible leading to an optimal value of five to six thiophene units per PCBM.     

Ternary Blend Strategy for Achieving High‐Efficiency Organic Solar Cells with Nonfullerene Acceptors Involved

Nonfullerene acceptors have recently drawn considerable attention in bulk heterojunction organic solar cells (OSCs). The power conversion efficiency (PCE) over 14% is achieved in single‐junction fullerene‐free OSCs, which has surpassed that of fullerene‐based counterparts. For future commercial applications, however, a high and stable PCE > 15% is required, which entails rational material design and device optimization. In this context, three approaches are generally utilized—the synthesis of novel nonfullerene acceptors and the selection of suitable polymer donors to pair with them, the tandem or multijunction device architecture, and the ternary blend strategy. Compared to the former two methods, the ternary strategy allows to employ the existing photovoltaic materials and the single‐junction device. Therefore, an exploration of nonfullerene acceptor–based ternary blend OSCs (NFTSCs) has shown unprecedented progress since 2016. This review summarizes and classifies the photovoltaic materials utilized in NFTSCs, aiming to not only exhibit the recent development of NFTSCs but also elucidate the correlation among donor/acceptor materials, film morphology, transport dynamics, and device fabrication toward high‐efficiency OSCs. Lastly, the above key advances are highlighted along with the existing issues and insights into the viable path for the further research thrusts are offered.