无线传感网络移动分簇路由策略

无线传感网络(WSN)路由协议中,分簇路由具有拓扑管理方便、能量高效和数据融合简单等优点,成为当前重点研究的路由技术。通过研究各种环境下的移动传感器网络,有效地降低能耗则是研究移动无线传感器网络的重要目的之一。针对无线传感网络中移动性问题,基于LEACH协议,利用移动传感器网络中节点距离、速度和剩余能量等因素提出了能量高效的移动分簇路由算法。实验结果表明此算法能够较好地支持节点移动,从而降低网络能耗,延长网络生存时间。     

基于Tinyos的低功耗MAC协议研究

由于无线传感器网络中的能量有限的特性,所以降低节点能耗,延长网络寿命在无线传感器网络中显得十分重要。低功耗的无线传感器网络协议,是无线传感器网络在应用中的一项重要技术。本文从无线传感器网络能耗方面出发,对BMAC、XMAC的优缺点进行了详细分析、提出了一个改进,并且基于Tinyos平台进行了实验,验证了低功耗协议良好的能耗特性。     

无线传感器网络能耗分析与策略研究

无线传感器网络技术得到了广泛应用,但是该技术一直受能量的制约,因此能量始终是无线传感器网络的核心问题。通过对传感器节点结构与网络体系的分析,得出了传感器网络的能耗特性。为了延长无线传感器网络的生命周期,对传感器节点工作能耗与传感网络能耗做了具体研究,再从低功耗节点设计、网络协议及环境中能量补给三个方面总结出了一套有效的节能策略。     

面向能耗控制的无线传感器网络节点协议优化

能量受限是无线传感器网络一个显著的特征。对网络进行能耗优化并延长网络生命周期是无线传感器网络研究的重点。提出了面向能耗控制的无线传感器网络节点协议优化方法。针对网络中数据发送所占较大的能耗比重,通过对协议优化,对发送功率的参数设置方法进行改进,改变以往发射功率的固定参数设置法,通过终端节点之间的距离动态调整发送功率的方法,以达到节省能耗并延长网络生命周期的目的。仿真和实验结果表明,改进后的发射功率动态参数设置法较改进之前的固定参数设置方法能更多地节约网络能耗。     

无线传感器网络能量高效混合MAC算法

针对无线传感器网络MAC协议中存在的能耗问题,提出了能量高效的无线传感器网络混合MAC(EEH-MAC)算法,采用基于TDMA机制的时槽系数动态调整簇内节点的时槽大小来降低数据的传输时延;同时,对部分不需要数据传输的节点不分配时槽来减少能耗;按簇内节点剩余能量系数形成时槽分配顺序来减少状态转换的能耗;在簇头之间采用CSMA/CA机制的随机分配策略进行通信.仿真结果表明,EEH-MAC协议能有效减少能耗并延长网络生命周期.     

基于树状拓扑的无线传感器网络MAC协议研究

针对无线传感器网络中树状拓扑的竞争型MAC协议存在一定能耗瑕疵的问题,根据ACK包回馈失败概率与传感器节点问平均通信延迟等因素,给出了适用于树状拓扑并采用时钟门限机制的新型MAC协议,该协议能实现单向信息采集树中父节点的能效控制。理论分析与仿真结果均表明,该机制能减少通信过程中不必要的能量浪费,提高无线传感器网络的能量效率。     

链路可靠的无线传感器网络组播路由协议

在无线传感器网络实际应用中,组播正在发挥着越来越重要的作用.但由于能量等多方面的因素,使得为无线传感器网络设计一个有效的组播路由是非常困难的.针对无线传感器网络中节点的能量限制,通过寻求节点间最短路径,提出一种能量有效的链路可靠组播路由协议(RLMR).该协议充分考虑到网络中节点的能耗因素和两节点间的链路可靠性等,通过对这两个因素的综合考虑,让能量较多并且以发送节点更靠近的节点承担更多传输任务的方式,为数据流优化路由选择,均衡无线传感器网络节点的能量消耗,以延长网络的生存时间.仿真结果证明了RLMR的有效性和可靠性.     

一种高能效无线传感器网络MAC协议

介质访问控制(MAC)协议是无线传感器网络研究领域的基础协议和支撑技术.因此,一种能量高效的MAC协议是提高整个无线传感器网络能量效率的基础.针对无线网络中能量储备有限的特点,在分析了现有无线传感器网络节能协议的基础上,提出了一种能量高效的MAC协议.通过动态调整占空比和消除边界节点等方式,提高了无线传感器网络的能量效率,延长了网络的生命周期.     

基于网格的无线传感器网络非均匀分簇算法

在无线传感器网络中,首先要考虑的是如何解决能耗问题.针对无线传感器网络现有算法存在的节点能耗不均匀及节点部署密集造成的数据冗余和能量浪费,提出了一种节能路由算法UECG.通过设定虚拟网格以及非均匀分簇来实现网络能量的均衡消耗.仿真结果表明,与LEACH协议及其改进协议EEUC相比,UECG算法能够有效减少冗余数据,平衡簇群间的能量消耗,达到延长网络寿命的目的.     

一种能量感知型无线传感器网络跨层式通信协议

结合无线传感器网络面向应用的实际需求,提出一种新颖的能量感知型无线传感器网络跨层协议ECLC,并给出了实现过程和仿真结果.基于重点关注热点能耗的策略,综合WSN在能量高效、可扩展性、服务质量等方面的不同要求,设计了简单可靠、易于实现的跨层式WSN网络协议.仿真结果表明:ECLC协议在传感器网络系统层面较好地改善能量消耗的有效性和均衡性,因而避免了网络中热点的过早出现,延长了整个网络的生存期.     

基于博弈论的井下监测网QoS路由算法研究

构建煤矿井下无线视频监控系统可有效弥补有线监控系统的不足,以无线多媒体传感器为网络节点设计了煤矿井下无线视频监控系统,针对传感器存在潜在的自私性特点,引入博弈理论思想,建立一种无线多媒体传感器网络QOS路由的博弈模型,并将其融入到路由协议中,提出了一种博弈路由协议,仿真实验表明能够有效均衡节点能量消耗,克服传感器自私性...     

Improved ant colony-based multi-constrained QoS energy-saving routing and throughput optimization in wireless Ad-hoc networks简

In order to establish a route supporting multi-constrained quality of service（QoS）, increase network throughput and reduce network energy consumption, an improved ant colony-based multi-constrained QoS energy-saving routing algorithm（IAMQER） is proposed. The ant colony algorithm, as one of the available heuristic algorithms, is used to find the optimal route from source node to destination node. The proposed IAMQER algorithm, which is based on the analysis of local node information such as node queue length, node forwarding number of data packets and node residual energy, balances the relationship between the network throughput and the energy consumption, thus improving the performance of network in multi-constrained QoS routing. Simulation results show that this IAMQER algorithm can find the QoS route that reduce average energy consumption and improves network packet delivery ratio under the end-to-end delay and packet loss ratio constraints.     

基于蚁群优化的无线多媒体传感器网络区分服务路由

无线多媒体传感器网络中存在多种类型的数据,而且这些数据的服务质量需求并不相同。针对这种情况,提出一种基于蚁群优化的区分服务路由协议（DSACO, differentiated service and ant colony optimization based routing protocol）。DSACO在网络分层的基础上通过限制蚂蚁的搜索范围以减少建立路由的时间和能量消耗,对不同服务质量需求的数据采用区分服务路由以满足不同类型数据的服务质量需求。仿真结果表明,新协议能够为多媒体数据的传输提供更好的QoS保障,在数据传输的平均时延、分组丢失率和能量消耗上优于已有路由协议。     

Performance Analysis of Adaptive Routing Structure for Wireless Sensor Network Based on Load Balancing

Wireless sensor network consists of sensor nodes with battery operated device. The key challenges in the wireless sensor network are energy consumption and routing optimization. This work presents the cluster based load balancing (CBLB) routing protocol. The proposed routing protocol is used to minimize the energy consumption and increase the routing performance. It avoids the routing robustness, delay and increases the delivery rate and network performance. In existing techniques, different routing protocols such as LEACH, HEED and MESTER were used to increase the network performance and to decrease the energy consumption. But these existing techniques did not satisfy the performance requirements of wireless sensor networks. Hence, there is a requirement to develop a technique that meets the QoS requirements and needs of wireless sensor network. The proposed CBLB routing protocol creates a cluster head in the decentralized network and the cluster head will be used to distribute the workload evenly to the cluster members for reducing the energy consumption in wireless sensor network. Experimental results analyze the performance of the proposed protocol with the different existing protocols. The proposed protocol achieves high throughput, delivery rate and reduces the energy consumption, delay and routing overhead.     

Virtual MIMO-based cross-layer design for wireless sensor networks

In this paper, a novel multihop virtual multiple-input-multiple-output (MIMO) communication protocol is proposed by the cross-layer design to jointly improve the energy efficiency, reliability, and end-to-end (ETE) QoS provisioning in wireless sensor network (WSN). In the protocol, the traditional low-energy adaptive clustering hierarchy protocol is extended by incorporating the cooperative MIMO communication, multihop routing, and hop-by-hop recovery schemes. Based on the protocol, the overall energy consumption per packet transmission is modeled and the optimal set of transmission parameters is found. Then, the issues of ETE QoS provisioning of the protocol are considered. The ETE latency and throughput of the protocol are modeled in terms of the bit-error-rate (BER) performance of each link. Then, a nonlinear constrained programming model is developed to find the optimal BER performance of each link to meet the ETE QoS requirements with a minimum energy consumption. The particle swarm optimization (PSO) algorithm is employed to solve the problem. Simulation results show the effectiveness of the proposed protocol in energy saving and QoS provisioning.     

Energy Efficient QoS Aware Hierarchical KF-MAC Routing Protocol in Manet

The paper proposes an energy efficient quality of services (QoS) aware hierarchical KF-MAC routing protocol in mobile ad-hoc networks. The proposed KF-MAC (K-means cluster formation firefly cluster head selection based MAC routing) protocol reduces the concentration of QoS parameters when the node transmits data from source to destination. At first, K-means clustering technique is utilized for clustering the network into nodes. Then the clustered nodes are classified and optimized by the firefly optimization algorithm to find cluster heads for the clustered nodes. The transmission of data begins in the network nodes and TDMA based MAC routing does communication. The observation on KF-MAC protocol performs well for QoS parameters such as bandwidth, delay, bit error rate and jitter. The evaluation of proposed protocol based on a simulation study concludes that the proposed protocol provides a better result in contrast to the existing fuzzy based energy aware routing protocol and modified dynamic source routing protocol. With KF-MAC protocol, the collision free data transmission with low average energy consumption is achieved.     

大规模无线传感网中基于能耗均衡的按需QoS协议

为满足大规模无线传感器网络局部区域信息收集时的QoS需求,在保证网络连通性的条件下最大限度降低网络能耗与控制开销,本文提出一种基于能耗均衡的按需QoS协议OQBED.该协议采用近似静态分簇和按需信息收集策略减少控制开销,通过有效选择工作节点数目以及执行簇头轮换机制来保障能耗均衡,并在簇头间选取满足QoS条件的最优能源路由来实现数据融合与传送.仿真结果表明,OQBED协议能有效减小控制开销,显著延长网络生命期,大幅度提高信息传输成功率.     

无线传感器网络路由协议与改进

详细介绍无线传感器网（WSN）两种代表性协议：信息协商传感器（SPIN）协议和低能量自适应分簇路由（LEACH）协议的概念、原理和优缺点。提出路由协议中需要进一步解决的问题。改进的WSN路由算法应尽可能降低节点能耗,以延长网络生存时间。     

无线传感器网络的分区异构分簇协议研究

针对无线传感器网络能量受限和路由协议中节点能量消耗不均衡的问题,提出一种新的无线传感器网络的分区异构分簇协议(PHC协议).该协议的核心是将3种不同能量等级的节点根据能量的不同分别部署在不同区域,能量较高的高级节点和中间节点使用聚类技术通过簇头直接传输数据到汇聚点,能量较低的普通节点则直接传输数据到汇聚点.仿真结果表明,该协议通过对节点合理的分配部署,使簇头分布均匀,更好地均衡了节点的能量消耗,延长了网络的稳定期,提高了网络的吞吐量,增强了网络的整体性能.     

基于双簇头非均匀分簇的LEACH协议的改进

在无线传感器网络中的LEACH协议是一种自适应聚类路由算法．由于LEACH协议存在着无法控制簇首在网络中的分布位置、簇首选择方式限制条件不够等缺点导致能量消耗太大．基于簇头能量限制和双簇头路由方式,对LEACH协议进行了改进,设计了一种降低能耗的双簇头非均匀分簇路由协议．双簇头非均匀分簇路由协议采用NS2进行网络仿真实验,通过仿真结果的分析以及与LEACH协议的对比,证明双簇头非均匀分簇路由协议有效提高了网络能耗的均衡性．