首页 | 官方网站   微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
移动Ad hoc网络中基于链路稳定性预测的按需路由协议   总被引:4,自引:0,他引:4  
移动Ad hoc网络拓扑的高度动态变化是造成传统按需路由协议的路由频繁通断的主要原因,因此在传统按需路由协议的基础上进行链路稳定性预测扩展,增强路由稳定性具有十分重要的意义。该文利用分组的接收功率把节点间的相对运动划分为靠近和远离两种类型,然后在不同相对运动类型下根据节点间距离得到了的链路平均维持时间。在路由过程中,中间节点利用得到的链路平均维持时间设置请求报文的转发延迟,通过一定转发规则选择稳定性较强的链路构成路径。仿真结果表明进行链路稳定性预测扩展后的按需路由协议能够有效增强路由的稳定性,并提高网络性能。  相似文献   

2.
设计能够适应高移动环境下的空基自组网路由协议是目前研究的重点方向。提出了基于负载均衡的优化路由协议,该协议在获得位置信息的前提下,首先预测出通信链路的有效时间,然后在满足数据的时延、带宽以及链路有效性等多约束条件下,路由协议以均衡节点负载为优化目标,使得网络节点都能合理承担数据传输任务。仿真结果表明,设计的路由协议能够保证网络节点合理分担传输任务,充分利用链路资源,提高网络的吞吐量。  相似文献   

3.
移动Ad hoc网络(MANET)是一种由无线移动主机/节点组成的动态自治网络.在MANET中进行有带宽保证的按需路由选择具有重要意义.本文提出一种新的按需路由算法LABGR(Location Aided Bandwidth Guaranteed Routing).LABGR以节点当前位置信息为基础,在路由选择过程中把路径稳定性和节点能量受限问题结合起来,采用受限扩散路由方法,利用多种机制避免在全网中进行扩散,限制路由请求过程中被影响的节点数目,有效提高了路由请求效率并且保证了链路带宽.本文还对LABGR算法特性进行了深入分析.  相似文献   

4.
水下传感网络是开发水域环境的有效技术手段。但在水下环境传输数据,信号衰减快,通信链路质量差,降低了数据包传递率。提出基于链路质量和位置的协作(LQLC)路由。LQLC路由引用协作路由思想,利用链路质量和节点能量信息,构建候选转发节点集;再从候选转发节点集中选择具有最优链路质量的节点作为转发节点;最后在候选转发节点集中选择离转发节点最近的节点作为协作节点。仿真结果表明,提出的LQLC路由提高了数据包传递率。  相似文献   

5.
陈凯  任智  韦亮  张关鑫 《电讯技术》2023,63(10):1589-1595
针对分布式无人机网络初始建网时间过长、周期性组网开销过大、链路稳定性与可靠性低的问题,提出了软件定义飞行自组网下基于节点合作的低开销且可靠有效路由解决方案(Low-overhead,Reliable and Efficient Routing Solution Based on Node Cooperation,NC-SDN)。首先,通过普通节点局部感知和软件定义网络(Software Defined Network,SDN)控制器全局感知配合,缩短了初始建网时间并减少了周期性组网开销;其次,通过普通节点主动感知链路状态与周期性传递告警信息,减少了未过期无效路由带来的不可靠传输风险;最后,通过SDN控制器的预测与切换,降低了用户业务传输中断的风险。仿真表明,NC-SDN在初始建网时间、周期性组网开销和丢包率等方面性能优于现有的SDN、优化链路状态路由和无线自组网按需平面距离向量路由。  相似文献   

6.
面向链路稳定性的MANET路径建立机制   总被引:4,自引:0,他引:4  
为了适应拓扑动态变化的Ad hoc网络,该文提出了一种面向链路稳定性的路由机制,节点根据少量接收信号强度样本值建立牛顿插值多项式描述连续时间域上的信号强度,进而在不预测节点运动方向和速度等相关参数的情况下估计链路生存时间,按照链路生存时间和跳数两个约束条件,源节点逐跳建立稳定的端到端路径。仿真结果表明,所建立的牛顿插值多项式能够准确地逼近节点随机移动过程中的实际接收信号强度,并且该路由机制能够有效地减少路由重建次数,降低数据包丢弃概率。  相似文献   

7.
基于时间序列分析的链路质量预测和稳定路由算法研究   总被引:1,自引:0,他引:1  
针对现有链路质量预测算法不适用于实际通信场景的问题,该文提出一个不依赖于任何特定信号传输模型和节点移动模型、低复杂度的实时链路质量预测算法,并将其应用于稳定路由协议设计。通信节点存储并更新其邻节点的接收信号强度集合以构成时间序列,将时间序列分析中的局部线性核平滑方法和滑动窗口局部多项式预测方法引入链路质量判断及预测。在此基础上,结合跨层协作思想,提出了节点移动自适应的提前路由修复机制。仿真结果表明,该预测算法具有较高的预测准确度,并能显著增强路由稳定性,提高网络性能。  相似文献   

8.
链路可靠的无线传感器网络组播路由协议   总被引:2,自引:0,他引:2       下载免费PDF全文
宋震  周贤伟  林亮 《电子学报》2008,36(1):64-69
在无线传感器网络实际应用中,组播正在发挥着越来越重要的作用.但由于能量等多方面的因素,使得为无线传感器网络设计一个有效的组播路由是非常困难的.针对无线传感器网络中节点的能量限制,通过寻求节点间最短路径,提出一种能量有效的链路可靠组播路由协议(RLMR).该协议充分考虑到网络中节点的能耗因素和两节点间的链路可靠性等,通过对这两个因素的综合考虑,让能量较多并且以发送节点更靠近的节点承担更多传输任务的方式,为数据流优化路由选择,均衡无线传感器网络节点的能量消耗,以延长网络的生存时间.仿真结果证明了RLMR的有效性和可靠性.  相似文献   

9.
无线ad-hoc网络部署在非人为控制的外部环境中,采用电池供电.在这种应用环境中,如何通过合理的路由协议设计降低能量开销、提高网络的生存时间是近年来研究的热点.文章提出一种结合链路质量与能效的跨层路由协议.在路由建立阶段综合考虑链路质量、发送数据包的能耗和节点剩余能量来建立路由.通过在路由维护阶段对链路质量和节点剩余能量进行检测,预测路由中断的发生,并进行本地修复.通过在IEEE 802.15.4 Matlab模拟器下进行仿真,验证了该协议能够有效地提高网络的生存时间、数据投递率及AODV协议的性能和稳定性.  相似文献   

10.
自组网环境下利用单向链路的能源节省路由研究   总被引:2,自引:0,他引:2  
针对自组网中节点电源的容量限制,本文提出了一种利用单向链路的能源节省路由算法。该算法充分利用网络中存在的单向链路,通过让能源较多的节点承担较多的传输任务的方式为数据流选择最佳路由,以延长网络的生存时间。仿真结果证明了该算法的有效性,以及单向链路对于能源节省具有较高的价值。  相似文献   

11.
DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.  相似文献   

12.
The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.  相似文献   

13.
Today, micro-system technology and the development of new MEMS (Micro-Electro-Mechanical Systems) are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.  相似文献   

14.
The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.  相似文献   

15.
From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.  相似文献   

16.
This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel's.  相似文献   

17.
Waveguide multilayer optical card (WMOC) is a novel storage device of three-dimensional optical information. An advanced readout system fitting for the WMOC is introduced in this paper. The hardware mainly consists of the light source for reading, WMOC, motorized stages addressing unit, microscope imaging unit, CCD detecting unit and PC controlling & processing unit. The movement of the precision motorized stage is controlled by the computer through Visual Basic (VB) language in software. A control panel is also designed to get the layer address and the page address through which the position of the motorized stages can be changed. The WMOC readout system is easy to manage and the readout result is directly displayed on computer monitor.  相似文献   

18.
In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal (200) (2d = 0.4027 nm) is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line(w), the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line(x), the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines(y), the 1 s2p ^3S~1-1 s^2 ^1S0 forbidden line(z) in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line(q) in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution(λ/△ 2) is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy.  相似文献   

19.
High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET > PDMAT > TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center.  相似文献   

20.
Due to variable symbol length of digital pulse interval modulation(DPIM), it is difficult to analyze the error performances of Turbo coded DPIM. To solve this problem, a fixed-length digital pulse interval modulation(FDPIM) method is provided. The FDPIM modulation structure is introduced. The packet error rates of uncoded FDPIM are analyzed and compared with that of DPIM. Bit error rates of Turbo coded FDPIM are simulated based on three kinds of analytical models under weak turbulence channel. The results show that packet error rate of uncoded FDPIM is inferior to that of uncoded DPIM. However, FDPIM is easy to be implemented and easy to be combined, with Turbo code for soft-decision because of its fixed length. Besides, the introduction of Turbo code in this modulation can decrease the average power about 10 dBm, which means that it can improve the error performance of the system effectively.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号