Solution Processable Fluorenyl Hexa‐peri‐hexabenzocoronenes in Organic Field‐Effect Transistors and Solar Cells

The organization of organic semiconductor molecules in the active layer of organic electronic devices has important consequences to overall device performance. This is due to the fact that molecular organization directly affects charge carrier mobility of the material. Organic field‐effect transistor (OFET) performance is driven by high charge carrier mobility while bulk heterojunction (BHJ) solar cells require balanced hole and electron transport. By investigating the properties and device performance of three structural variations of the fluorenyl hexa‐peri‐hexabenzocoronene (FHBC) material, the importance of molecular organization to device performance was highlighted. It is clear from ¹H NMR and 2D wide‐angle X‐ray scattering (2D WAXS) experiments that the sterically demanding 9,9‐dioctylfluorene groups are preventing π–π intermolecular contact in the hexakis‐substituted FHBC 4 . For bis‐substituted FHBC compounds 5 and 6 , π–π intermolecular contact was observed in solution and hexagonal columnar ordering was observed in solid state. Furthermore, in atomic force microscopy (AFM) experiments, nanoscale phase separation was observed in thin films of FHBC and [6,6]‐phenyl‐C61‐butyric acid methyl ester (PC₆₁BM) blends. The differences in molecular and bulk structural features were found to correlate with OFET and BHJ solar cell performance. Poor OFET and BHJ solar cells devices were obtained for FHBC compound 4 while compounds 5 and 6 gave excellent devices. In particular, the field‐effect mobility of FHBC 6 , deposited by spin‐casting, reached 2.8 × 10^?3 cm² V^?1 s and a power conversion efficiency of 1.5% was recorded for the BHJ solar cell containing FHBC 6 and PC₆₁BM.     

Luminescent Poly(p‐phenylenevinylene) Hole‐Transport Layers with Adjustable Solubility

The active part of present polymer light‐emitting diodes (PLEDs) consists of only a single layer. Multilayer devices have the advantage that the electron and hole transport can be balanced and that the recombination can be removed from the metallic cathode, leading to higher efficiencies. A major problem for polymer‐based multilayer devices is the solubility of the materials used; a multilayer can not be fabricated when a spin‐cast layer dissolves in the solvent of the subsequent layer. We demonstrate the development of high‐mobility poly(p‐phenylenevinylene) (PPV)‐based hole‐transport layers with tunable solubility by chemical modification. Enhanced charge‐transport properties are achieved by using symmetrically substituted PPVs; copolymers of long and short side chains enable us to tune the solubility without loss of the enhanced charge transport. Dual‐layer PLEDs, in which the holes are efficiently transported via this copolymer towards the luminescent layer, exhibit an enhanced efficiency at high voltages (> 10 V) and a strongly improved robustness against electrical breakdown.     

Organic Field‐Effect Devices as Tool to Characterize the Bipolar Transport in Polymer‐Fullerene Blends: The Case of P3HT‐PCBM

In organic bulk heterojunction solar cells (oBHJ) the blend morphology in combination with the charge transport properties of the individual components controls the extracted photocurrent. The organic field‐effect transistor (OFET) has been proved as a powerful instrument to evaluate the unipolar carrier transport properties in a wide range of cases. In our work we extend the OFET concept to the evaluation of the bipolar transport properties in polymer‐fullerenes blends and propose a method to improve the accuracy of the evaluation. The method is based on capacitance–voltage (C–V) measurements on MOS structures prepared on the same blends and delivers complementary information on the bulk heterojunction to the one obtained with FETs. The relevance for photovoltaic applications is investigated through the correlation between the current–voltage behavior of solar cells and the bipolar mobility for composites with varying polymer molecular weight and processed from different solvents. In particular the transport features of solar cells produced from o‐Xylene (oX), a non chlorinated solvent more suitable to production requirements, have been compared to the one of devices cast from Chlorobenzene (CB) solution. For the P3HT‐PCBM blend a consistent correlation between the mobility and the electrical fill factor and power performance was found. A significant asymmetry in the bipolar carrier mobility, together with low electron mobility dependent on the M_w value, affects the performances of thick o‐Xylene cast devices. In the case of devices processed from Chlorobenzene the slower carrier has higher mobility and the small electrical losses detected are eventually more related to the formation of space‐charge and eventually to surface recombination. This results in an efficient charge collection that is almost thickness independent. We report a dependence of the slow‐carrier type (electrons or holes) and their mobility on the specific combination of molecular weight and solvent. The mobility data and the solar cell performance coherently fit to the prediction of a device model only based on the drift of carriers under the built‐in electric field originated in the donor‐acceptor oBHJ.     

High‐Performance Photoresponsive Organic Nanotransistors with Single‐Layer Graphenes as Two‐Dimensional Electrodes

Graphene behaves as a robust semimetal with the high electrical conductivity stemming from its high‐quality tight two‐dimensional crystallographic lattice. It is therefore a promising electrode material. Here, a general methodology for making stable photoresponsive field effect transistors, whose device geometries are comparable to traditional macroscopic semiconducting devices at the nanometer scale, using cut graphene sheets as 2D contacts is detailed. These contacts are produced through oxidative cutting of individual 2D planar graphene by electron beam lithography and oxygen plasma etching. Nanoscale organic transistors based on graphene contacts show high‐performance FET behavior with bulk‐like carrier mobility, high on/off current ratio, and high reproducibility. Due to the presence of photoactive molecules, the devices display reversible changes in current when they are exposed to visible light. The calculated responsivity of the devices is found to be as high as ～8.3 A W^?1. This study forms the basis for making new types of ultrasensitive molecular devices, thus initiating broad research interest in the field of nanoscale/molecular electronics.     

High‐Performance Inverted Polymer Solar Cells: Device Characterization,Optical Modeling,and Hole‐Transporting Modifications

Although high power conversion efficiencies (PCE) have already been demonstrated in conventional structure polymer solar cells (PSCs), the development of high performance inverted structure polymer solar cells is still lagging behind despite their demonstrated superior stability and feasibility for roll‐to‐roll processing. To address this challenge, a detailed study of solution‐processed, inverted‐structure PSCs based on the blends of a low bandgap polymer, poly(indacenodithiophene‐co‐phananthrene‐quinoxaline) (PIDT‐PhanQ) and [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) as the bulk heterojunction (BHJ) layer is carried out. Comprehensive characterization and optical modeling of the resulting devices is performed to understand the effect of device geometry on photovoltaic performance. Excellent device performance can be achieved by optimizing the optical field distribution and spatial profiles of excitons generation within the active layer in different device configurations. In the inverted structure, because the peak of the excitons generation is located farther away from the electron‐collecting electrode, a higher blending ratio of fullerene is required to provide higher electron mobility in the BHJ for achieving good device performance.     

Surface‐Transfer Doping of Organic Semiconductors Using Functionalized Self‐Assembled Monolayers

Controlling charge doping in organic semiconductors represents one of the key challenges in organic electronics that needs to be solved in order to optimize charge transport in organic devices. Charge transfer or charge separation at the molecule/substrate interface can be used to dope the semiconductor (substrate) surface or the active molecular layers close to the interface, and this process is referred to as surface‐transfer doping. By modifying the Au(111) substrate with self‐assembled monolayers (SAMs) of aromatic thiols with strong electron‐withdrawing trifluoromethyl (CF₃) functional groups, significant electron transfer from the active organic layers (copper(II) phthalocyanine; CuPc) to the underlying CF₃‐SAM near the interface is clearly observed by synchrotron photoemission spectroscopy. The electron transfer at the CuPc/CF₃‐SAM interface leads to an electron accumulation layer in CF₃‐SAM and a depletion layer in CuPc, thereby achieving p‐type doping of the CuPc layers close to the interface. In contrast, methyl (CH₃)‐terminated SAMs do not display significant electron transfer behavior at the CuPc/CH₃‐SAM interface, suggesting that these effects can be generalized to other organic‐SAM interfaces. Angular‐dependent near‐edge X‐ray absorption fine structure (NEXAFS) measurements reveal that CuPc molecules adopt a standing‐up configuration on both SAMs, suggesting that interface charge transfer has a negligible effect on the molecular orientation of CuPc on various SAMs.     

Doping‐Induced Charge Trapping in Organic Light‐Emitting Devices

By using pyran‐containing donor–acceptor dyes as doping molecules in organic light‐emitting devices (OLEDs), we scrutinize the effects of charge trapping and polarization induced by the guest molecules in the electro‐active host material. Laser dyes 4‐(dicyanomethylene)‐2‐methyl‐6‐[2‐(julolidin‐9‐yl)phenyl]ethenyl]‐4H‐pyran (DCM2) and the novel 4‐(dicyanomethylene)‐2‐methyl‐6‐{2‐[(4‐diphenylamino)phenyl]ethenyl}‐4H‐pyran (DCM‐TPA) are used as model compounds. The emission color of these polar dyes depends strongly on doping concentration, which we have attributed to polarization effects induced by the doping molecules themselves. Their frontier orbital energy levels are situated within the bandgap of the tris(8‐hydroxyquinoline)aluminum (Alq₃) host matrix and allow the investigation of either electron trapping or both electron and hole trapping. In the case of DCM‐TPA doping, we were able to show that electron trapping leads to a partial shift of the recombination zone out of the doped Alq₃ region. To impede charge‐recombination processes taking place in the undoped host matrix, a charge‐blocking layer efficiently confines the recombination zone inside the doped zone and gives rise to increased luminous efficiency. For a doping concentration of 1 wt.‐% we obtain a maximum luminous efficiency of 10.4 cd A^–1. At this doping concentration, the yellow emission spectrum shows excellent color saturation with CIE chromaticity coordinates x, y of 0.49 and 0.50, respectively. In the case of DCM2 the recombination zone is much less affected for the same doping concentrations, which is ascribed to the fact that both electrons and holes are being trapped. The experimental findings are corroborated with a numerical simulation of the doped multilayer devices.     

Organic Light‐Emitting Diodes with Field‐Effect‐Assisted Electron Transport Based on α‐bi;,ω‐bi;‐Diperfluorohexyl‐quaterthiophene

Materials commonly used in the carrier transport layers of organic light‐emitting diodes, where transport occurs through the bulk, are in general very different from materials used in organic field‐effect transistors, where transport takes place in a very thin accumulation channel. In this paper, the use of a high‐performance electron‐conducting field‐effect transistor material, diperfluorohexyl‐substituted quaterthiophene (DFH‐4T), as the electron‐transporting material in an organic light‐emitting diode structure is investigated. The organic light‐emitting diode has an electron accumulation layer in DFH‐4T at the organic hetero‐interface with the host of the light‐emitting layer, tris(8‐hydroxyquinoline) aluminum (Alq₃). This electron accumulation layer is used to transport electrons and inject them into the active emissive host‐guest layer. By optimizing the growth conditions of DFH‐4T for electron transport at the organic hetero‐interface, high electron current densities of 750 A cm^?2 are achieved in this innovative light‐emitting structure.     

Tuning Contact Resistance in Top‐Contact p‐Type and n‐Type Organic Field Effect Transistors by Self‐Generated Interlayers

Contact resistance significantly limits the performance of organic field‐effect transistors (OFETs). Positioning interlayers at the metal/organic interface can tune the effective work‐function and reduce contact resistance. Myriad techniques offer interlayer processing onto the metal pads in bottom‐contact OFETs. However, most methods are not suitable for deposition on organic films and incompatible with top‐contact OFET architectures. Here, a simple and versatile methodology is demonstrated for interlayer processing in both p‐ and n‐type devices that is also suitable for top‐contact OFETs. In this approach, judiciously selected interlayer molecules are co‐deposited as additives in the semiconducting polymer active layer. During top contact deposition, the additive molecules migrate from within the bulk film to the organic/metal interface due to additive‐metal interactions. Migration continues until a thin continuous interlayer is completed. Formation of the interlayer is confirmed by X‐ray photoelectron spectroscopy (XPS) and cross‐section scanning transmission electron microscopy (STEM), and its effect on contact resistance by device measurements and transfer line method (TLM) analysis. It is shown that self‐generated interlayers that reduce contact resistance in p‐type devices, increase that of n‐type devices, and vice versa, confirming the role of additives as interlayer materials that modulate the effective work‐function of the organic/metal interface.     

Gate Capacitance‐Dependent Field‐Effect Mobility in Solution‐Processed Oxide Semiconductor Thin‐Film Transistors

Solution‐processed oxide semiconductors (OSs) used as channel layer have been presented as a solution to the demand for flexible, cheap, and transparent thin‐film transistors (TFTs). In order to produce high‐performance and long‐sustainable portable devices with the solution‐processed OS TFTs, the low‐operational voltage driving current is a key issue. Experimentally, increasing the gate‐insulator capacitances by high‐k dielectrics in the OS TFTs has significantly improved the field‐effect mobility of the OS TFTs. But, methodical examinations of how the field‐effect mobility depends on gate capacitance have not been presented yet. Here, a systematic analysis of the field‐effect mobility on the gate capacitances in the solution‐processed OS TFTs is presented, where the multiple‐trapping‐and‐release and hopping percolation mechanism are used to describe the electrical conductivity of the nanocrystalline and amorphous OSs, respectively. An intuitive single‐piece expression showing how the field‐effect mobility depends on gate capacitance is developed based on the aforementioned mechanisms. The field‐effect mobility, depending on the gate capacitances, of the fabricated ZnO and ZnSnO TFTs clearly follows the theoretical prediction. In addition, the way in which the gate insulator properties (e.g., gate capacitance or dielectric constant) affect the field‐effect mobility maximum in the nanocrystalline ZnO and amorphous ZnSnO TFTs are investigated.     

Solution‐Deposited Zinc Oxide and Zinc Oxide/Pentacene Bilayer Transistors: High Mobility n‐Channel,Ambipolar, and Nonvolatile Devices

A solution processed n‐channel zinc oxide (ZnO) field effect transistor (FET) was fabricated by simple dip coating and subsequent heat treatment of a zinc acetate film. The field effect mobility of electrons depends on ZnO grain size, controlled by changing the number of coatings and zinc acetate solution concentration. The highest electron mobility achieved by this method is 7.2 cm² V^?1 s^?1 with On/Off ratio of 70. This electron mobility is higher than for the most recently reported solution processed ZnO transistor. We also fabricated bilayer transistors where the first layer is ZnO, and the second layer is pentacene, a p‐channel organic which is deposited by thermal evaporation. By changing the ZnO grain size (or thickness) this type of bilayer transistor shows p‐channel, ambipolar and n‐channel behavior. For the ambipolar transistor, well balanced electron and hole mobilities are 7.6 × 10^?3 and 6.3 × 10^?3 cm² V^?1 s^?1 respectively. When the ZnO layer is very thin, the transistor shows p‐channel behavior with very high reversible hysteresis. The nonvolatile tuning function of this transistor was investigated.     

Solution‐Processable Hole‐Generation Layer and Electron‐Transporting Layer: Towards High‐Performance,Alternating‐Current‐Driven,Field‐Induced Polymer Electroluminescent Devices

The effect of solution‐processed p‐type doping of hole‐generation layers (HGLs) and electron‐transporting layer (ETLs) are systematically investigated on the performance of solution‐processable alternating current (AC) field‐induced polymer EL (FIPEL) devices in terms of hole‐generation capability of HGLs and electron‐transporting characteristics of ETLs. A variety of p‐type doping conjugated polymers and a series of solution‐processed electron‐transporting small molecules are employed. It is found that the free hole density in p‐type doping HGLs and electron mobility of solution‐processed ETLs are directly related to the device performance, and that the hole‐transporting characteristics of ETLs also play an important role since holes need to be injected from electrode through ETLs to refill the depleted HGLs in the positive half of the AC cycle. As a result, the best FIPEL device exhibits exceptional performance: a low turn‐on voltage of 12 V, a maximum luminance of 20 500 cd m^?2, a maximum current and power efficiency of 110.7 cd A^?1 and 29.3 lm W^?1. To the best of the authors' knowledge, this is the highest report to date among FIPEL devices driven by AC voltage.     

Relating the Morphology of Poly(p‐phenylene vinylene)/Methanofullerene Blends to Solar‐Cell Performance

The performance of bulk‐heterojunction solar cells based on a phase‐separated mixture of donor and acceptor materials is known to be critically dependent on the morphology of the active layer. Here we use a combination of techniques to resolve the morphology of spin cast films of poly(p‐phenylene vinylene)/methanofullerene blends in three dimensions on a nanometer scale and relate the results to the performance of the corresponding solar cells. Atomic force microscopy (AFM), transmission electron microscopy (TEM), and depth profiling using dynamic time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS) clearly show that for the two materials used in this study, 1‐(3‐methoxycarbonyl)propyl‐1‐phenyl‐[6,6]‐methanofullerene (PCBM) and poly[2‐methoxy‐5‐(3′,7′‐dimethyloctyloxy)‐1,4‐phenylene vinylene] (MDMO‐PPV), phase separation is not observed up to 50 wt.‐% PCBM. Nanoscale phase separation throughout the film sets in for concentrations of more than 67 wt.‐% PCBM, to give domains of rather pure PCBM in a homogenous matrix of 50:50 wt.‐% MDMO‐PPV/PCBM. Electrical characterization, under illumination and in the dark, of the corresponding photovoltaic devices revealed a strong increase of power conversion efficiency when the phase‐separated network develops, with a sharp increase of the photocurrent and fill factor between 50 and 67 wt.‐% PCBM. As the phase separation sets in, enhanced electron transport and a reduction of bimolecular charge recombination provide the conditions for improved performance. The results are interpreted in terms of a model that proposes a hierarchical build up of two cooperative interpenetrating networks at different length scales.     

High‐Efficiency Organic Solar Cells Based on Preformed Poly(3‐hexylthiophene) Nanowires

Bulk heterojunction solar cells based on blends of poly(3‐hexylthiophene) (P3HT) and phenyl‐C61‐butyric acid methyl ester (PC₆₁BM) are fabricated using self‐assembled P3HT nanowires in a marginal solvent without post‐treatments. The interconnected network structures of self‐organized P3HT nanowires create continuous percolation pathways through the active layer and contribute to enhanced carrier mobility. The morphology and photovoltaic properties are studied as a function of ageing time of the P3HT precursor solution. Optimal photovoltaic properties are found at 60 h ageing time, which increases both light absorption and charge balance. Multilayered solar cells with a compositionally graded structure are fabriacted using preformed P3HT nanowires by inserting a pure P3HT donor phase onto the hole‐collecting electrode. Applying optimized annealing conditions to the P3HT buffer layer achieves an enhanced hole mobility and a power conversion efficiency of 3.94%. The introduction of a compositionally graded device structure, which contains a P3HT‐only region, reduces charge recombination and electron injection to the indium tin oxide (ITO) electrode and enhances the device properties. These results demonstrate that preformed semiconductor nanowires and compositionally graded structures constitute a promising approach to the control of bulk heterojunction morphology and charge‐carrier mobility.     

Dynamic Processes in Sandwich Polymer Light‐Emitting Electrochemical Cells

The operational mechanism of polymer light‐emitting electrochemical cells (LECs) in sandwich geometry is studied by admittance spectroscopy in combination with numerical modeling. At bias voltages below the bandgap of the semiconducting polymer, this allows the determination of the dielectric constant of the active layer, the conductivity of mobile ions, and the thickness of the electric double layers. At bias voltages above the bandgap, p–n junction formation gives rise to an increase in capacitance at intermediate frequencies (≈10 kHz). The time and voltage dependence of this junction are successfully studied and modeled. It is shown that impedance measurements cannot be used to determine the junction width. Instead, the capacitance at intermediate biases corresponds to a low‐conductivity region that can be significantly wider than the recombination zone. Finally, the long settling time of sandwich polymer LECs is shown to be due to a slow process of dissociation of salt molecules that continues after the light‐emitting p–n junction has formed. This implies that in order to significantly decrease the response‐time of LECs an electrolyte/salt combination with a minimal ion binding energy must be used.     

Stretchable Active Matrix Inorganic Light‐Emitting Diode Display Enabled by Overlay‐Aligned Roll‐Transfer Printing

An active matrix‐type stretchable display is realized by overlay‐aligned transfer of inorganic light‐emitting diode (LED) and single‐crystal Si thin film transistor (TFT) with roll processes. The roll‐based transfer enables integration of heterogeneous thin film devices on a rubber substrate while preserving excellent electrical and optical properties of these devices, comparable to their bulk properties. The electron mobility of the integrated Si‐TFT is over 700 cm² V^?1 s^?1, and this is attributed to the good interface between the Si channel and the thermally grown SiO₂ insulator. The light emission properties of the LED are of wafer quality. The resulting display stably operates under tensile strains up to 40%, over 200 cycles, demonstrating the potential of stretchable displays based on inorganic materials.     

Determination of the minority carrier lifetime in crystalline silicon thin‐film material

The effective minority carrier lifetimes on epitaxial silicon thin‐film material have been measured successfully using two independent microwave‐detected photoconductivity decay setups. Both measurement setups are found to be equally suited to determine the minority carrier lifetime of crystalline silicon thin‐film (cSiTF) material. The different measurement conditions to which the sample under investigation is exposed are critically analyzed by both simulations and measurements on a large number of lifetime samples. No systematic deviation between the lifetime results from different measurement setups could be observed, underlining the accuracy of the determined lifetime value. Subsequently, a method to separate the epitaxial bulk lifetime and the total recombination velocity, consisting of front surface and interface recombination between the epitaxial layer and the substrate, is presented. The method, based on different thicknesses of the epitaxial layer, is applied to all batches of this investigation. Each batch consists of samples with the same material quality but different epitaxial layer thicknesses whereas different batches differ in their material quality. In addition, the same method is also successfully applied on individual cSiTF samples. From the results, it can be concluded that the limiting factor of the effective minority carrier lifetime for the investigated solar‐grade cSiTF material is the elevated recombination velocity at the interface between epitaxial layer and the substrate compared with microelectronic‐grade material. In contrast, the samples cannot be classified into different material qualities by their epitaxial bulk lifetimes. Even on multicrystalline substrate, solar‐grade material can exhibit high epitaxial bulk lifetimes comparable to microelectronic‐grade material. Copyright © 2012 John Wiley & Sons, Ltd.     

Discotic Liquid Crystal‐Functionalized Gold Nanorods: 2‐ and 3D Self‐Assembly and Macroscopic Alignment as well as Increased Charge Carrier Mobility in Hexagonal Columnar Liquid Crystal Hosts Affected by Molecular Packing and π–π Interactions

Gold nanorods functionalized with triphenylene‐based discotic liquid crystal (LC) motifs show striking self‐assembly behavior both on transmission electron microscopy (TEM) grids as well as in the bulk enforced by the π–π‐stacking of triphenylene groups of adjacent nanorods. TEM images confirm that these discotic LC nanorods form ribbons of parallel‐stacked nanorods several hundred nanometer long. The pursued silane conjugation approach to decorate the nanorods allows for the preparation of dispersions of the nanorods in the hexagonal columnar phases of parent discotic LCs, where the nanorods can be macroscopically aligned with almost 80% efficiency by a simple shearing protocol. Doping the parent host materials with about 1% by weight of the discotic LC‐capped nanorods also reduces the lattice parameter and the intracolumnar packing, which gives rise to enhanced charge carrier mobility in these hosts as determined by time‐of‐flight measurements.     

Air‐Stable n‐Type Organic Field‐Effect Transistors Based on Carbonyl‐Bridged Bithiazole Derivatives

An electronegative conjugated compound composed of a newly designed carbonyl‐bridged bithiazole unit and trifluoroacetyl terminal groups is synthesized as a candidate for air‐stable n‐type organic field‐effect transistor (OFET) materials. Cyclic voltammetry measurements reveal that carbonyl‐bridging contributes both to lowering the lowest unoccupied molecular orbital energy level and to stabilizing the anionic species. X‐ray crystallographic analysis of the compound shows a planar molecular geometry and a dense molecular packing, which is advantageous to electron transport. Through these appropriate electrochemical properties and structures for n‐type semiconductor materials, OFET devices based on this compound show electron mobilities as high as 0.06 cm² V^?1 s^?1 with on/off ratios of 10⁶ and threshold voltages of 20 V under vacuum conditions. Furthermore, these devices show the same order of electron mobility under ambient conditions.     

Linking Group Influences Charge Separation and Recombination in All‐Conjugated Block Copolymer Photovoltaics

All‐conjugated block copolymers bring together hole‐ and electron‐conductive polymers and can be used as the active layer of solution‐processed photovoltaic devices, but it remains unclear how molecular structure, morphology, and electronic properties influence performance. Here, the role of the chemical linker is investigated through analysis of two donor–linker–acceptor block copolymers that differ in the chemistry of the linking group. Device studies show that power conversion efficiencies differ by a factor of 40 between the two polymers, and ultrafast transient absorption measurements reveal charge separation only in block copolymers that contain a wide bandgap monomer at the donor–acceptor interface. Optical measurements reveal the formation of a low‐energy excited state when donor and acceptor blocks are directly linked without this wide bandgap monomer. For both samples studied, it is found that the rate of charge recombination in these systems is faster than in poly­mer–polymer and polymer–fullerene blends. This work demonstrates that the linking group chemistry influences charge separation in all‐conjugated block copolymer systems, and further improvement of photovoltaic performance may be possible through optimization of the linking group. These results also suggest that all‐conjugated block copolymers can be used as model systems for the donor–acceptor interface in bulk heterojunction blends.