基于表决融合的带宽受限的协作频谱感知算法

协作的频谱感知使认知无线电(CR)网络对主用户进行可靠的检测,并避免了对主用户通信的干扰.数据融合是协作的频谱感知的关键技术.但是当协作认知无线电用户较多时,它们向融合中心汇报的感知信息就会占用大量的带宽.本文提出了将表决融合准则与检查策略相结合的协作频谱感知的方法,来减少发往融合中心的平均感知比特数,从而有效节约传输带宽.推导分析了该算法在理想信道和非理想信道中的频谱感知性能,并给出了这两种情况检测概率的闭合式.仿真结果表明,此种基于表决融合准则的检查协作频谱感知算法的性能最优,即在较高的感知性能下有大量的感知比特的节约.     

基于证据折扣优化DSmT的协同频谱感知器

协同频谱感知器通过充分利用多个认知无线电用户的空间分集增益,对抗单用户深度衰落和阴影效应问题,降低了感知系统对本地感知用户的灵敏度要求,减少由于单用户检测不确定性带来的系统误判。利用D-S方法进行协同频谱感知,通过在本地提取置信指派,再上传至融合中心进行证据推理与判决,占用较窄的控制信道带宽,达到优于传统方法的检测性能,如"或"、"与"和"最优融合"感知方法。但低信噪用户带来的冲突数据会限制D-S方法性能,使其信噪鲁棒性较差。本文首先定义感知用户基本置信指派函数,基于DSmT提出证据折扣优化DSmT协同频谱感知器。该感知器根据不同认知用户数据的可靠性,对其置信指派函数进行折扣,加强高可靠性数据对融合结果的贡献,降低不可靠数据对融合结果的干扰,有效解决冲突数据下的协同频谱感知信息融合问题。仿真结果表明,证据折扣优化DSmT协同频谱感知器具有良好的检测性能和信噪比鲁棒性。     

基于Dempster-Shafer证据理论的协同频谱感知算法

认知无线电的首要任务是频谱感知,单个认知用户的频谱感知结果容易受到衰落和多径的影响,本文结合证据理论研究了多个认知用户的协同频谱感知问题.为了在融合中心未知先验信息的条件下实现对授权用户的有效检测,文章基于Dempster-Shafer证据理论,对认知用户的本地感知结果提取证据,然后在融合中心进行融合并判决,提出了一种基于Dempster-Shafer证据理论的协同频谱感知算法.仿真结果表明,该算法能够在融合中心未知先验信息情况下,获得较好的频谱感知性能.     

基于D-S证据理论的循环平稳频谱协作感知

为了避免干扰授权用户的正常通信,认知无线电系统需要较好的频谱检测性能。提出了基于循环平稳特征和D-S证据理论的多天线多用户频谱协作感知方法。分析了多天线接收信号的谱相关函数,在频域按照最大比合并的方法合并各天线接收信号,得到合并信号的谱相关函数。依据谱相关函数的能量,在多用户中采用D-S证据理论做协作频谱检测。仿真分析表明,基于循环平稳特征和D-S证据理论的多天线多用户频谱协作感知方法可有效改善认知无线电系统检测性能。     

随机共振在认知无线电频谱感知中应用的最新研究进展

频谱感知是认知无线电网络的一项关键技术.低信噪比(SNR)环境下频谱检测的性能会大幅降低,而随机共振(SR)能有效提高信号信噪比,所以将其应用到频谱感知中,能增强认知用户对主用户(PU)的检测性能.首先介绍了随机共振在认知无线电频谱感知中应用的最新研究进展,包括随机共振在本地感知中(如能量检测、协方差矩阵频谱感知、循环平稳特征检测)及协作感知中的应用,然后指出了随机共振在认知无线电频谱感知中还有待解决的问题,并提出了下一步的研究方向.     

基于信任度与信噪比的认知无线电协同频谱检测

无线网络中存在信噪比较高的恶意认知用户的情况,为了有效利用可靠的认知无线电(CR)技术用户的本地感知结果,提出了一种基于信任度的信噪比比较协同频谱感知算法,可有效剔除认知网络中存在的信噪比较高的恶意认知用户。仿真实验表明,在存在恶意认知用户的认知无线电网络中,该算法检测性能优于传统的或准则(OR)数据融合的协同频谱感知算法以及基于信噪比比较协同频谱感知算法。     

多跳认知水声通信中的分布式稀疏频谱检测算法

水声信道常表现为严重的频率选择性衰落、低的声波传播速度和严重的多径效应等。这些特性使得认知水声通信中的频谱检测变得非常困难。除此之外,水声通信网络通常为自组织网络,缺少融合中心,而基于融合中心的频谱检测算法需要将各个认知用户的感知数据传送到融合中心,因此该方法在认知水声通信中是不可行的。与认知无线电类似,由于低的频谱使用率,认知水声通信中的频谱也是稀疏的。考虑到水声信道的特殊性,基于压缩感知理论,该文对认知无线电中的压缩频谱检测算法进行了改进,提出了两种不同情况下(已知水声信道状态信息和未知水声信道状态信息)的适用于认知水声通信的分布式稀疏频谱检测算法。通过近邻认知用户之间的合作,这两种算法利用空间分集增益和联合稀疏特性来提高算法的频谱检测性能。通过分布式计算和局部优化,新算法使得认知用户与其近邻认知用户之间只需进行少量的数据交互。仿真实验结果证明了该文提出的算法在检测认知水声通信系统中频谱空洞的有效性。     

一种信任度模糊分配的合作频谱感知算法

由于无线信道的多径衰落和阴影效应等因素,单个认知用户无法区分频段空闲还是授权用户的信号处于深度衰落中.合作频谱感知运用信息融合技术,通过融合多个认知用户的结果来提高频谱感知的性能.证据理论作为一种有效的不确定性推理方法,在合作频谱感知中已有较好的应用.本文将模糊集与证据理论相结合,提出一种信任度模糊分配的合作频谱感知算法.各个认知用户首先进行本地能量检测,然后使用正态形隶属函数进行基本概率赋值,根据认知用户的检测结果分配信任度.融合中心接收所有认知用户的证据,按照Dempster组合规则进行融合,最后进行判决.仿真结果表明,信任度模糊分配的合作频谱感知算法在感知性能上或者在算法复杂度上要优于现有的证据理论合作频谱感知算法.     

基于可靠次用户信息的协作频谱感知算法研究

对认知无线电系统最基本要求之一就是次用户必须有能力以高的精确率来确定主用户是否存在。而以前对认知无线电频谱感知的研究表明:在实际认知网络中次用户之间的相互协作可以提高其频谱检测性能。然而,对于协作频谱感知而言,随着协作次用户数目的增加,势必会增大用于传输本地检测结果到融合中心的专用控制信道带宽,从而增加系统开销。该文在控制信道带宽有限的约束条件下,提出一种通过考虑可靠次用户信息的协作频谱感知算法来进一步改善频谱检测的性能。该算法的基本思想:只有具有可靠的本地检测结果的次用户才发送自己的检测结果到融合中心,否则,该次用户不发送任何信息。同时,对提出的该算法在理论上进行了推导,通过仿真结果表明:在控制信道带宽受限的约束下,相比于传统的"或"门协作频谱感知算法,提出的算法能够大大改善对主用户的检测性能。     

认知无线电网络中合作频谱感知机制的优化

为了提高检测效率和频谱利用率,该文对认知无线电中合作频谱感知的感知机制进行了优化。针对信道监测和信道搜索两个不同的感知场景,分别给出了检测周期、检测时间和搜索时间的选取和优化方法,并提出了新的信道搜索方式。研究分析和仿真结果可以看出,合作频谱感知和主动感知方式的引入可以提高检测性能和传输速率,对感知机制和策略的选取和优化有效地提高系统吞吐量,降低感知时延和开销,这样可以提高认知无线电网络的性能和灵敏性,在保证授权用户不被干扰的同时最大化空闲频谱的接入机会。     

Preparation and Characterization of TaN ALD Precursors

High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET ＞ PDMAT ＞ TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center.     

Curved crystal spectrometer for the measurement of X-ray lines from laser-produced plasmas

In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal （200） （2d = 0.4027 nm） is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line（w）, the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line（x）, the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines（y）, the 1 s2p ^3S~1-1 s^2 ^1S0 forbidden line（z） in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line（q） in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution（λ/△ 2） is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy.     

Electronic Structure of Semiconductor Nanocrystals

This paper reviews our recent development of the use of the large-scale pseudopotential method to calculate the electronic structure of semiconductor nanocrystals, such as quantum dots and wires, which often contain tens of thousands of atoms. The calculated size-dependent exciton energies and absorption spectra of quantum dots and wires are in good agreement with experiments. We show that the electronic structure of a nanocrystal can be tuned not only by its size,but also by its shape. Finally,we show that defect properties in quantum dots can be significantly different from those in bulk semiconductors.     

Critical Stage Rule-Based Real Time Dispatch（RTD）System in Highly-Mixed-Products （HMP） FAB

An improving utilization and efficiency of critical equipments in semiconductor wafer fabrication facilities are concerned. Semiconductor manufacturing FAB is one of the most complicated and cost sensitive environments. A good dispatching tool will make big difference in equipment utilization and FAB output as a whole. The equipment in this paper is In-Line DUV Scanner. There are many factors impacting utilization and output on this equipment group. In HMP environment one of the issues is changing of reticule in this area and idle counts due to load unbalance between equipments. Here we'll introduce a rule-based RTD system which aiming at decreasing the number of recipe change and idle counts among a group of scanner equipment in a high-mixed-products FAB.     

GaAsSb/InAlAs PA DHBTs Grown by Production MBE

The epi material growth of GaAsSb based DHBTs with InAlAs emitters are investigated using a 4 × 100mm multi-wafer production Riber 49 MBE reactor fully equipped with real-time in-situ sensors including an absorption band edge spectroscope and an optical-based flux monitor. The state-of-the-art hole mobilities are obtained from 100nm thick carbon-doped GaAsSb. A Sb composition variation of less than ± 0.1 atomic percent across a 4 × 100mm platen configuration has been achieved. The large area InAlAs/GaAsSb/InP DHBT device demonstrates excellent DC characteristics,such as BVCEO＞6V and a DC current gain of 45 at 1kA/cm2 for an emitter size of 50μm × 50μm. The devices have a 40nm thick GaAsSb base with p-doping of 4. 5 × 1019cm-3 . Devices with an emitter size of 4μm × 30μm have a current gain variation less than 2% across the fully processed 100mm wafer. ft and fmax are over 50GHz,with a power efficiency of 50% ,which are comparable to standard power GaAs HBT results. These results demonstrate the potential application of GaAsSb/InP DHBT for power amplifiers and the feasibility of multi-wafer MBE for mass production of GaAsSb-based HBTs.     

Propagation of hermite-cosh-gaussian beams passing through ABCD optical system with an annular aperture

By using the expansion of the aperture function into a finte sum of complex Gaussian functions, the corresponding analytical expressions of Hermite-cosh-Gaussian beams passing through annular apertured paraxially and symmetrically optical systems written in terms of ABCD matrix were derived, and they could reduce to the cases with squared aperture. In a similar way, the corresponding analytical expressions of cosh-Gaussian beams through annular apertured ABCD matrix were also given. The method could save more calculation time than that by using the diffraction integral formula directly.     

Noise character analysis and the restraint of self-pulsation laser diodes

We calculate the Langevin noise sources of self-pulsation laser diodes, analyze the effects of active region noise and saturable-absorption region noise on the power fluctuation as well as period fluctuation, and propose a novel method to restrain the noise effects. A visible SIMULINK model is established to simulate the system, The results indicate that the effects of noise in absorption region can be ignored; that with the increase of DC injecting current, the noise effects enhance power jitter, and nevertheless, the period jitter is decreased; and that with external sinusoidal current modulating the self-pulsation laser diode, the noise-induced power jitter and period jitter can be suppressed greatly. This work is valuable for clock recovery in all-optical network.     

Influence of polarization extinction ratio on distributed polarization coupling detection

Distributed polarization coupling in polarization-maintaining fibers can be detected by using a white light Michelson interferometer. This technique usually requires that only one polarization mode is excited. However, in practical measurement, the injection polarization direction could not be exactly aligned to one of the principal axes of the PMF, so the influence of the polarization extinction ratio should be considered. Based on the polarization coupling theory, the influence of the incident polarization extinction on the measurement result is evaluated and analyzed, and a method for distributed polarization coupling detection is developed when both two orthogonal eigenmodes are excited.     

High-quality single-crystal CdSe nanoribbons and their optical properties

Large-scale synthesis of single-crystal CdSe nanoribbons is achieved by a modified thermal evaporation method, in which two-step-thermal-evaporation is used to control CdSe sources＇ evaporation. The synthesized CdSe nanoribbons are usually several micrometers in width, 50 nm in thickness, and tens to several hundred micrometers in length. Studies have shown that high-quality CdSe nanoribbons with regular shapes can be obtained by this method. Room-temperature photolumines-cence indicates that the lasing emission at 710 nm has been observed under optical pumping （266 nm） at power densities of 25-153 kW/cm^2. The full width half maximum （FWHM） of the lasing mode is 0.67 nm     

Call for Papers

正Communications—VLSI Researches and industries of telecommunications have been growing rapidly in the last 20 years and will keep their high growing pace in the next decade.The involved researches and developments cover mobile communications,highway and last-mile broadband communication,domain specific communications,and emerging D2D M2M communications.Radio communication steps into its