紧凑型多陷波超宽带天线设计与研究

提出了一款紧凑型多陷波特性超宽带天线,该天线由圆形贴片和改进的接地板组成。采用在辐射贴片上开两个圆弧状U形槽和接地板上开一个U形窄缝隙的结构使其具有多陷波特性。天线的体积仅为32 mm′25 mm′1.6 mm,结构紧凑。仿真与测试结果表明:该天线工作带宽为2.8 ~ 16 GHz,实现了3.2~3.8 GHz、4.5~5.5 GHz 和7.2~8.6 GHz 3个频段的陷波特性,有效阻隔了WiMAX(3.3~ 3.6 GHz)、大容量微波通信频段(4.5~5 GHz)、部分WLAN(5.1~5.35 GHz)、X波段(7.25~7.75 GHz)和国际电信联盟(ITU)波段(8.01~8.5 GHz)窄带信号的干扰。除陷波频段外该天线具有良好性能和辐射方向性,更适合应用于超宽带系统。     

一种陷波可重构的超宽带天线设计与研究

该文设计了一种具有四陷波及可重构特性的超宽带天线。通过在天线辐射贴片、微带馈线上刻蚀U形槽,以及在改进型地板上添加环形开口寄生单元来实现天线四陷波特性。采用在陷波结构中加入PIN二极管开关的方法实现陷波可重构特性,通过开关的断开与闭合,分别实现三陷波和四陷波特性,从而进一步提高了超宽带频段的利用率。分析了天线陷波产生的原理,研究了天线部分尺寸参数对陷波的影响。通过仿真和实物测量结果对比表明,该天线在3~11.74 GHz频段内可有效抑制窄带系统的干扰。天线尺寸为24 mm×16 mm×0.8 mm,结构较紧凑,可广泛用于各种超宽带通信系统。     

一种具有陷波特性的多模态频率可重构UWB天线

为了应对在超宽带(Ultra-Wide Band, UWB)系统中频率可重构天线尺寸偏大、模式单一等问题,提出了一种具有陷波特性的多模态频率可重构UWB天线。该天线通过在圆形单极子的辐射贴片上添加T型枝节和刻蚀I型槽、倒U型槽,以获得UWB覆盖范围为2.7～11.6 GHz的宽阻抗带宽,并产生四个陷波带。仿真与实测表明：控制PIN二极管的偏置状态,可以实现单频段、双频段、三频段、四频段和五频段共五种频段下八种工作模式的多模态切换。此天线大小为16 mm×19 mm,较传统单极子天线体积减小了40%以上,实现了小型化。天线的最大增益为4.13 dBi,具有良好的辐射特性。     

一种共面波导馈电的双陷波渐变槽天线

为了滤除WIMAX(3.3～3.8 GHz)和WLAN(5.125～5.825 GHz)窄带信号对超宽带系统的干扰,该文提出一款共面波导馈电的小型化双陷波渐变槽天线。共面波导结构可以有效地扩展天线的带宽,实现对整个UWB(3.1～10.6 GHz)频段的全覆盖。通过在天线的馈线上开L型缝隙和在辐射贴片上开一对E字型缝隙的方法,有效实现了在3.15～3.97 GHz和4.94～6.05 GHz频段的双陷波特性,能够抑制WIMAX和WLAN对超宽带系统的干扰。该天线结构简单紧凑,尺寸非常小,仅为40 mm×18 mm×0.813 mm。仿真和实测结果表明该天线在超宽带波段内具有良好的陷波特性、增益特性,可以应用于小型化超宽带系统中。文中方法对于陷波渐变槽天线的研究具有一定的借鉴意义。     

一种新型超宽带陷波天线的设计

提出了一种新型超宽带(UWB)陷波天线,该天线的结构由常规的圆形单极子天线演变而成。为获得超宽带特性,天线的辐射体被设计成渐变的笑脸形状。同时,通过在辐射贴片上开C形槽来实现陷波特性。合理选择C形槽的尺寸可有效去除超宽带频段内的无线局域网WLAN(5.150~5.825GHz)的干扰。仿真结果表明,天线在4.91~6.07GHz处形成了阻带特性(电压驻波比VSWR>2),天线结构新颖简单,适用于超宽带通信系统。     

基于液晶聚合物的双陷波可穿戴天线的设计

基于超薄液晶聚合物柔性材料,设计了一种满足无线体域网(WBAN)需求的双陷波UWB可穿戴天线。该天线由椭圆形贴片、锥形三叉戟共面馈线和梯形地板组成。通过分别在辐射贴片上蚀刻椭圆开口谐振环和在共面馈线上蚀刻n形槽以实现双陷波特性。该天线采用共面波导的馈电方式,具有良好的共面性,易于与载体共形。经网络矢量分析仪测试结果表明,该天线在3. 1~10. 6 GHz的超宽带频段内回波损耗小于-10 d B的同时,在4. 88~6. 15 GHz和7. 55~8. 51 GHz内拥有双陷波特性,可抑制WiMAX和ITU 8 GHz频段对系统产生的干扰。与以往的可穿戴天线相比,该天线厚度仅为0. 1 mm,且柔性可弯曲。此外,对天线在弯曲情况下进行测试,天线特性基本保持不变。     

一种紧凑型超宽带双陷波天线设计与研究

超宽带(UWB)系统的工作频段与现有的许多窄带系统频段相互重叠,因此各个系统信号之间存在潜在的干扰。针对上述问题提出了一种紧凑型超宽带双陷波天线。天线由一个圆形辐射贴片构成并通过50W的微带线进行馈电。接地板和传统的接地板相比被截短了,以提高天线的阻抗带宽。通过在辐射贴片上刻蚀H 型槽来实现天线的双陷波功能,并在微带馈线中引入了嵌入式谐振回路(ERC)结构,加大了天线的陷波深度和阻带宽度,陷波性能好于同频段的双陷波天线。仿真和测试结果表明,天线在3.1～4.2 GHz 以及5.0～6.6GHz 具有陷波特性,有效地避免了WiMAX 和WLAN 频段信号的干扰。同时在2.8 ~10.7 GHz 的其它频段上具有良好的阻抗匹配和较好辐射方向特性。天线的尺寸为34mm*26mm*1.6 mm,结构较为紧凑。     

一种具有三阻带特性的超宽带天线的设计与研究*

提出了一种紧凑型共面波导馈电的具有三阻带特性的超宽带天线。所设计天线的基本几何结构由共面波导(CPW)馈电线、菱形辐射贴片和矩形宽缝隙组成。通过在辐射贴片上刻蚀一个U型槽,以及在共面波导的接地面上增加两对L型的寄生旁枝结构来实现天线的三陷波特性。天线尺寸为32mm×32mm×0.508mm。仿真和实验结果表明,该天线在2.6~11.5GHz的频段内电压驻波比小于2,在3.15~3.80GHz、5.20~5.80GHz和8.2~8.7GHz三个频段内具有陷波特性,分别有效阻隔了Wi MAX系统、WLAN系统和ITU 8GHz频段信号对于超宽带(UWB)系统的干扰。在除三个阻带频段外的其余UWB工作频段范围内,具有良好的辐射方向特性和稳定的增益。仿真结果和实验结果表现出良好的一致性。     

一种新型小尺寸三陷波超宽带天线设计

文中提出了一种新型小尺寸具有三陷波特性的UWB天线。所设计的天线基本几何结构由50 Ω馈电线、圆形辐射贴片、缺陷地和一对开口谐振环组成,通过在天线的圆形辐射贴片上内嵌一对Y型贴片、地板上蚀刻出U型贴片和一对开口谐振环实现三陷波特性,天线的尺寸为30 mm×30 mm×16 mm。仿真和测试结果表明,该天线29~107 GHz的频段内回波损耗＜-10 dB,在37~42 GHz、515~5825 GHz和79~84 GHz3个频段内具有陷波特性,分别有效抑制了C频段的卫星系统、WLAN系统和X频段卫星系统对超宽带系统的干扰。在除3个阻带频段外的其余UWB工作频段范围内,有着良好的辐射方向特性和稳定的增益。仿真结果和实验结果表现出了良好的一致性。     

一种双陷波超宽带阵列天线的设计

以传统矩形微带天线为基础模型,设计了一种双陷波超宽带阵列天线。阵列由两个相同结构的超宽带单极子天线构成,均由微带线馈电。通过在辐射贴片上蚀刻两个C型槽实现了WiMAX和WLAN频段的陷波,在两个贴片边缘开一个矩形缺口并加载寄生单元来提高隔离度。测试与仿真吻合度较好,天线覆盖2.5～12.0 GHz,具有3.3～3.7 GHz和5.1～5.9 GHz两个阻带,隔离度全部高于22 dB,峰值增益达6.7 dB,辐射方向近乎全向,可应用于UWB无线通信系统。     

Isolation enhancement for dual‐band MIMO antenna system using multiple slots loading technique

In this paper, a novel multiple slot loading technique is studied in detail for the isolation enhancement of the dual‐band MIMO antenna system. The proposed MIMO antenna design consists of the microstrip patch loaded with T‐shaped slots parallel to the non‐radiating edge of the patch. The frequency tuning could be achieved by varying the length of the T‐shape slot arm. The proposed MIMO antenna system is optimised for operation in WLAN and WiMAX applications. The isolation enhancement is achieved by providing simple multiple slots loaded in the ground plane between radiating elements. The length of the slots is λ/4 . The system is fabricated and tested using a vector network analyser and anechoic chamber. The reduction in mutual coupling up to ?29.16 dB and ?24.09 dB for the 2.4 GHz and 3.4 GHz, respectively, is achieved. The bandwidths are 62.3 MHz (3.33–3.39 GHz) and 55.5 MHz (2.37–2.42 GHz), respectively. The total gain obtained in this case is 1.8 dBi at 2.4 GHz and 1.2 dBi at 3.4 GHz, respectively. The dimensions of the proposed designed antenna are 70 mm × 60 mm × 1.6 mm. The results were also verified through mutual coupling parameters like envelope correlation coefficient (ECC) and channel capacity loss (CCL) at the desired frequencies.     

Compact ultra-wideband antenna with tri-band notched characteristic

A compact ultra-wideband printed planar antenna with tri-band notched characteristic is presented. Two different types of slots are used to obtain tri-band notched characteristic. By using a U-slot defected ground structure, a notched band, 5?6 GHz for WLAN, is achieved. An H-shaped slot is etched on the radiating patch to obtain another two notched bands at 3.3?3.7 GHz for WiMAX and 7.2 GHz for some C-band satellite communication systems. The proposed antenna yields an impedance bandwidth of 3.1?10.6 GHz with VSWR , 2, except the notched bands. The antenna is successfully simulated and measured, showing tri-band notched characteristic can be obtained by using two different slots.     

Performances of OSIC Detector of an UpLink OFDM Massive-MIMO System in Rayleigh and Ricain Fading Channels

A compact rectangular microstrip-fed Ultra Wideband patch antenna with double band notched feature at Wi-Max and WLAN is offered in this paper. The designed antenna is composed of an ordinary rectangular patch antenna with a partially defective ground structure. For achieving dual notch characteristics a ‘U’ and ‘Reversed U’ slots are embedded in the radiating patch. The partial ground plane structure with U shaped slot in the middle is incorporated for achieving additional resonance and bandwidth enhancement. The proposed antenna has a measurement of 20 × 33 × 1.6 mm³. First notch created by U shaped slot at frequency 3.5 GHz is for Wi-Max (from 2.9 to 4.5 GHz) and Second notch which is generated by Reversed U shaped slots at frequency 5.4 GHz is for WLAN (from 5.49 to 6.45 GHz). The antenna covers almost complete range of Ultra Wideband (3.1–10.6 GHz). The Simulation analysis of the proposed antenna is carried out using CST-2011 simulation software. The radiation pattern of the simulated antenna is near Omnidirectional and the Gain of proposed antenna is almost stable over the range of UWB excluding notch bands.

     

Design of Dual‐Band MIMO Antenna with High Isolation for WLAN Mobile Terminal

In this paper, we propose a dual‐band multiple‐input multiple‐output (MIMO) antenna with high isolation for WLAN applications (2.45 GHz and 5.2 GHz). The proposed antenna is composed of a mobile communication terminal board, eight radiators, a coaxial feed line, and slots for isolation. The measured ?10 dB impedance bandwidths are 10.1% (2.35 GHz to 2.6 GHz) and 3.85% (5.1 GHz to 5.3 GHz) at each frequency band. The proposed four‐element MIMO antenna has an isolation of better than 35 dB at 2.45 GHz and 45 dB at 5.2 GHz between each element. The antenna gain is 3.2 dBi at 2.45 GHz and 4.2 dBi at 5.2 GHz.     

Compact Circularly Polarized Antenna with a Capacitive Feed for GPS/GLONASS Applications

This letter presents a novel compact circularly polarized patch antenna for Global Positioning System/Global Navigation Satellite System (GPS/GLONASS) applications. The proposed antenna is composed of a simple square radiating patch fed by a capacitive dual‐feeder to increase the impedance bandwidth and a lumped element hybrid coupler to achieve the broadband characteristic of the axial ratio (AR). The realized antenna dimensions are 28 mm × 28 mm × 4 mm, which is the most compact size among the dual‐band GPS/GLONASS antennas reported to date. The measured results demonstrate that the proposed antenna has a gain of 2.5 dBi to 4.2 dBi and an AR of 0.41 dB to 1.51 dB over the GPS/GLONASS L1 band (1.575 GHz to 1.61 GHz).     

Compact ultra-wideband printed antenna with band-rejection characteristic

A novel and compact ultra-wideband printed antenna with band-rejection characteristic is proposed. By cutting an L-shaped notch on the radiating patch, the impedance bandwidth of the proposed antenna can be enhanced. In addition, a C-shaped slot is introduced to obtain the band-rejection operation of the antenna. The antenna, with compact size of 15.5/spl times/21 mm including the ground plane, operates over 3.08-10.97 GHz and has the rejected band from 5.03 to 5.91 GHz.     

一种新型双陷波超宽带天线设计

设计了一种新型双陷波超宽带印刷天线。辐射贴片底部为梯形结构,实现了良好的阻抗匹配。通过在贴片上加载两个U型缝隙,分别在中心频率3.5GHz和5.5GHz处产生陷波。比较陷波前后天线表面电流密度,并用传输线理论对陷波产生机理进行了分析。天线实测与仿真结果吻合,通带内天线辐射效果良好,陷波频段内增益下降超过5dB,达到了陷波抑制的效果。     

Compact CPW-fed dual-band antenna

A novel coplanar waveguide (CPW) antenna is proposed for dual-band WLAN applications. It comprises a rectangular patch, a rectangular notch cut at the lower edge of the patch and a CPW transmission line. The rectangular patch together with the ground plane of the coplanar waveguide radiates at the lower frequency band, 2.4 GHz for IEEE 802.11b/g, while the rectangular notch resonates in the upper band, 5.2/5.8 GHz for IEEE 802.11a. The designed antenna is only 32 × 5 mm, which can provide stable omnidirectional radiation patterns with an average gain of 2 dBi in both the bands. The antenna is very compact and suitable for 2.4 and 5.2/5.8 GHz WLAN operations.     

A slot resonators based quintuple band-notched Y-shaped planar monopole ultra-wideband antenna

A Y-shaped ultra-wideband (UWB) monopole antenna containing modified ground plane with five stop bands is presented. An inverted U-shaped slot and a C-shaped slot are placed on Y-shaped radiating patch to achieve two notched bands while three pairs of C-shaped slots are placed at different positions on modified ground plane to achieve three more notched bands. The proposed antenna is designed, fabricated and experimentally tested. The designed Y-shaped antenna has overall dimensions of 36 × 38 × 1.6 mm³ (0.34λ_l × 0.36 λ_l × 0.016 λ_l) and has impedance bandwidth 2.86–13.3 GHz at |S₁₁| < −10 dB level. Measured band notches are achieved at 3.75/5.43/7.87/8.62/9.87 GHz centre notched frequencies to eliminate worldwide interoperability for microwave access (WiMAX) band (3.45–4.0 GHz), wireless local area network (WLAN) band (5.15–5.90 GHz), X-band for satellite communication (6.77–8.00 GHz), ITU-8 band (8.3–9.1 GHz), and radio navigation (RN) band (9.3–10.6 GHz), respectively. Variation of slot parameter on individual band notch is also investigated. Omnidirectional radiation pattern for XZ-plane and dipole-like radiation pattern for YZ-plane are observed. Stable gain, variation of phase response in linear fashion and group delay <1.3 ns for whole ultra-wideband except at band notches is achieved.