Solvent-Free Electrolyte for High-Temperature Rechargeable Lithium Metal Batteries

The formation of lithiophobic inorganic solid electrolyte interphase (SEI) on Li anode and cathode electrolyte interphase (CEI) on the cathode is beneficial for high-voltage Li metal batteries. However, in most liquid electrolytes, the decomposition of organic solvents inevitably forms organic components in the SEI and CEI. In addition, organic solvents often pose substantial safety risks due to their high volatility and flammability. Herein, an organic-solvent-free eutectic electrolyte based on low-melting alkali perfluorinated-sulfonimide salts is reported. The exclusive anion reduction on Li anode surface results in an inorganic, LiF-rich SEI with high capability to suppress Li dendrite, as evidenced by the high Li plating/stripping CE of 99.4% at 0.5  mA cm⁻² and 1.0 mAh cm⁻², and 200-cycle lifespan of full LiNi_0.8Co_0.15Al_0.05O₂ (2.0 mAh cm⁻²) || Li (20 µm) cells at 80 °C. The proposed eutectic electrolyte is promising for ultrasafe and high-energy Li metal batteries.     

Inorganic Filler Enhanced Formation of Stable Inorganic-Rich Solid Electrolyte Interphase for High Performance Lithium Metal Batteries

Lithium metal (LM) is a promising anode material for next generation lithium ion based electrochemical energy storage devices. Critical issues of unstable solid electrolyte interphases (SEIs) and dendrite growth however still impede its practical applications. Herein, a composite gel polymer electrolyte (GPE), formed through in situ polymerization of pentaerythritol tetraacrylate with fumed silica fillers, is developed to achieve high performance lithium metal batteries (LMBs). As evidenced theoretically and experimentally, the presence of SiO₂ not only accelerates Li⁺ transport but also regulates Li⁺ solvation sheath structures, thus facilitating fast kinetics and formation of stable LiF-rich interphase and achieving uniform Li depositions to suppress Li dendrite growth. The composite GPE-based Li||Cu half-cells and Li||Li symmetrical cells display high Coulombic efficiency (CE) of 90.3% after 450 cycles and maintain stability over 960 h at 3 mA cm⁻² and 3 mAh cm⁻², respectively. In addition, Li||LiFePO₄ full-cells with a LM anode of limited Li supply of 4 mAh cm⁻² achieve capacity retention of 68.5% after 700 cycles at 0.5 C (1 C = 170 mA g⁻¹). Especially, when further applied in anode-free LMBs, the carbon cloth||LiFePO₄ full-cell exhibits excellent cycling stability with an average CE of 99.94% and capacity retention of 90.3% at the 160th cycle at 0.5 C.     

Perfluoro Macrocyclic Ether as an Ambifunctional Additive for High-Performance SiO and Nickel 88%-Based High-Energy Li-ion Battery

State-of-the-art lithium (Li)-ion batteries employ silicon anode active material at a limited fraction while strongly relying on fluoroethylene carbonate (FEC) electrolyte additive exceeding 10 wt.% to enable stable cycling. The swelling issue of silicon in the aspect of solid electrolyte interphase (SEI) instability and a risk of safety hazards and high manufacturing cost due to FEC has motivated the authors to design a well-working fluorinated additive substitute. High-capacity cells employing nickel-rich oxide cathode are pursued by operating at > 4.2 V versus Li/Li⁺, for which anodic stability of electrolyte is required. Herein, a highly effective new ambifunctional additive of icosafluoro-15-crown 5-ether is proposed at a little fraction of 0.4 wt.% for the stabilized interfaces and reduced swelling of high capacity (3.5 mAh cm⁻²) 5 wt.% SiO-graphite anode and LiNi_0.88Co_0.08Mn_0.04O₂ cathode. Utilizing together with a lowered fraction of FEC, reversible long 300 cycles at 4.35 V and 1 C (225 mA g⁻¹) are achieved. Material characterization results reveal that such stabilization is derived from the surface passivation of both anode and cathode with perfluoro ether, LiF, and Li_xPF_y species. The present study gives insight into electrolyte formulation design with lower cost and both-side stabilization strategies for silicon and nickel-rich active materials and their interfaces.     

High Areal Capacity Dendrite-Free Li Anode Enabled by Metal–Organic Framework-Derived Nanorod Array Modified Carbon Cloth for Solid State Li Metal Batteries

Li metal is one of the most promising anode materials for high energy density batteries. However, uncontrollable Li dendrite growth and infinite volume change during the charge/discharge process lead to safety issues and capacity decay. Herein, a carbonized metal–organic framework (MOF) nanorod arrays modified carbon cloth (NRA-CC) is developed for uniform Li plating/stripping. The carbonized MOF NRAs effectively convert the CC from lithiophobic to lithiophilic, decreasing the polarization and ensuring homogenous Li nucleation. The 3D interconnected hierarchal CC provides adequate Li nucleation sites for reducing the local current density to avoid Li dendrite growth, and broadens internal space for buffering the volume change during Li plating/stripping. These characteristics afford a stable cycling of the NRA-CC electrode with ultrahigh Coulombic efficiencies of 96.7% after 1000 h cycling at 2 mA cm⁻² and a prolonged lifespan of 200 h in the symmetrical cell under ultrahigh areal capacity (12 mAh cm⁻²) and current (12 mA cm⁻²). The solid-state batteries assembled with the composite Li anode, high-voltage cathode (LiNi_0.5Co_0.2Mn_0.3O₂), and composite solid-state electrolyte also deliver excellent cyclic and rate performance at 25 °C. This work sheds fresh insights on the design principles of a dendrite-free Li metal anode for safe solid-state Li metal batteries.     

Electrolytes Enriched by Crown Ethers for Lithium Metal Batteries

Lithium (Li) metal battery is considered the most promising next-generation battery due to its low potential and high theoretical capacity. However, Li dendrite growth causes serious safety problems. Herein, the 15-Crown-5 (15-C-5) is reported as an electrolyte additive based on solvation shell regulation. The strong complex effect between Li⁺ ion and 15-C-5 can reduce the concentration of Li ions on the electrode surface, thus changing the nucleation, and repressing the growth of Li dendrites in the plating process. Significantly, the strong coordination of Li⁺/15-C-5 would be able to make them aggregate around the Li crystal surface, which could form a protective layer and favor the formation of a smooth and dense solid electrolyte interphase with high toughness and Li⁺ ion conductivity. Therefore, the electrolyte system with 2.0 wt% 15-C-5 achieves excellent electrochemical performance with 170 cycles at 1.0 mA cm⁻² with capacity of 0.5 mA h cm⁻² in symmetric Li|Li cells. The obviously enhanced cycle and rate performance are also achieved in Li|LiNi_0.6Co_0.2Mn_0.2O₂ (NCM622) full cells. The 15-C-5 demonstrates to be a promising additive for the electrolytes toward safe and efficient Li metal batteries.     

Hexafluoroisopropyl Trifluoromethanesulfonate-Driven Easily Li+ Desolvated Electrolyte to Afford Li||NCM811 Cells with Efficient Anode/Cathode Electrolyte Interphases

Solid electrolyte interphase (SEI) and cathode electrolyte interphase (CEI) with optimized components and structures are considered to be crucial for lithium-ion batteries. Here, gradient lithium oxysulfide (Li₂SO_x, x = 0, 3, 4)/uniform lithium fluoride (LiF)-type SEI is designed in situ by using hexafluoroisopropyl trifluoromethanesulfonate (HFPTf) as electrolyte additive. HFPTf is more likely to be reduced on the surface of Li anode in electrolytes due to its high reduction potential. Moreover, HFPTf can make Li⁺ desolvated easily, leading to the increase in the flux of Li⁺ on the surface of Li anode to avoid the growth of Li dendrites. Thus, the cycling stability of Li||Li symmetric cells is improved to be 1000 h at 0.5 mA cm⁻². In addition, HFPTf-contained electrolyte could make Li||NCM811 batteries with a capacity retention of 70% after 150 cycles at 100 mA g⁻¹, which is attributed to the formation of uniform and stable CEI on the cathode surface for hindering the dissolvation of metal ions from the cathode. This study provides effective insights on the strong ability of additives to adjust electrolytes in “one phase and two interphases” (electrolyte and SEI/CEI).     

Hydrofluoric Acid-Removable Additive Optimizing Electrode Electrolyte Interphases with Li+ Conductive Moieties for 4.5 V Lithium Metal Batteries

High-voltage lithium metal batteries (LMBs) are capable to achieve the increasing energy density. However, their cycling life is seriously affected by unstable electrolyte/electrode interfaces and capacity instability at high voltage. Herein, a hydrofluoric acid (HF)-removable additive is proposed to optimize electrode electrolyte interphases for addressing the above issues. N, N-dimethyl-4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl) aniline (DMPATMB) is used as the electrolyte additive to induce PF₆⁻ decomposition to form a dense and robust LiF-rich solid electrolyte interphase (SEI) for suppressing Li dendrite growth. Moreover, DMPATMB can help to form highly Li⁺ conductive Li₃N and LiBO₂, which can boost the Li⁺ transport across SEI and cathode electrolyte interphase (CEI). In addition, DMPATMB can scavenge traced HF in the electrolyte to protect both SEI and CEI from the corrosion. As expected, 4.5 V Li|| LiNi_0.6Co_0.2Mn_0.2O₂ batteries with such electrolyte deliver 145 mAh g⁻¹ after 140 cycles at 200 mA g⁻¹. This work provides a novel insight into high-voltage electrolyte additives for LMBs.     

Hierarchical Composite-Solid-Electrolyte with High Electrochemical Stability and Interfacial Regulation for Boosting Ultra-Stable Lithium Batteries

Solid-state electrolytes have drawn enormous attention to reviving lithium batteries but have also been barricaded in lower ionic conductivity at room temperature, awkward interfacial contact, and severe polarization. Herein, a sort of hierarchical composite solid electrolyte combined with a “polymer-in-separator” matrix and “garnet-at-interface” layer is prepared via a facile process. The commercial polyvinylidene fluoride-based separator is applied as a host for the polymer-based ionic conductor, which concurrently inhibits over-polarization of polymer matrix and elevates high-voltage compatibility versus cathode. Attached on the side, the compact garnet (Li_6.4La₃Zr_1.4Ta_0.6O₁₂) layer is glued to physically inhibit the overgrowth of lithium dendrite and regulate the interfacial electrochemistry. At 25 °C, the electrolyte exhibits a high ionic conductivity of 2.73 × 10⁻⁴ S cm⁻¹ and a decent electrochemical window of 4.77 V. Benefiting from this elaborate electrolyte, the symmetrical Li||Li battery achieves steady lithium plating/stripping more than 4800 h at 0.5 mA cm⁻² without dendrites and short-circuit. The solid-state batteries deliver preferable capacity output with outstanding cycling stability (95.2% capacity retained after 500 cycles, 79.0% after 1000 cycles at 1 C) at ambient temperature. This hierarchical structure design of electrolyte may reveal great potentials for future development in fields of solid-state metal batteries.     

Phosphonium Bromides Regulating Solid Electrolyte Interphase Components and Optimizing Solvation Sheath Structure for Suppressing Lithium Dendrite Growth

Electrolyte additives play important roles in suppressing lithium dendrite growth and improving the electrochemical performance of long-life lithium metal batteries (LMBs), however, it is still challenging to design individual additive for adjusting the solid electrolyte interphase (SEI) components and changing lithium ion solvation sheath in the electrolyte at the same time for optimizing electrochemical performance. Herein, alkyl-triphenyl-phosphonium bromides (alkyl-TPPB) are designed as the electrolyte additive to enhance the stability of metallic Li anode under the guidance of multi-factor principle for electrolyte additive molecule design (EDMD). Both alkyl-TPP cations and Br⁻ anions produce positive influences on suppressing Li dendrite growth and stabilizing the unstable interphase between metallic Li anode/electrolyte. As expected, the optimized solvation sheath structure, and the stable SEI suppress Li dendrite growth. As a result, the Li||Li₄Ti₅O₁₂ cell reveals a long stable life over 1000 cycles with high Coulombic efficiency (99.9%). This work provides an insight on stabilizing SEI and optimizing solvation sheath structure with novel approach to develop long-term stability and safety LMBs.     

Non-Flammable Electrolyte with Lithium Nitrate as the Only Lithium Salt for Boosting Ultra-Stable Cycling and Fire-Safety Lithium Metal Batteries

Lithium metal batteries (LMBs) attract considerable attention for their incomparable energy density. However, safety issues caused by uncontrollable lithium dendrites and highly flammable electrolyte limit large-scale LMBs applications. Herein, a low-cost, thermally stable, and low environmentally-sensitive lithium nitrate (LiNO₃) is proposed as the only lithium salt to incorporate with nonflammable triethyl phosphate and fluoroethylene carbonate (FEC) co-solvent as the electrolyte anticipated to enhance the performance of LMBs. Benefiting from the presence of NO₃⁻ and FEC with strong solvation effect and easily reduced ability, a Li₃N–LiF-rich stable solid electrolyte interphase is constructed. Compared to commercial electrolytes, the proposed electrolyte has a high Coulombic efficiency of 98.31% in Li-Cu test at 1 mA cm⁻² of 1.0 mAh cm⁻² with dendrite-free morphology. Additionally, the electrolyte system shows high voltage stability and cathode electrolyte interphase film-forming properties with stable cycling performances, which exhibit outstanding capacity retention rates of 96.39% and 83.74% after 1000 cycles for LFP//Li and NCM811//Li, respectively. Importantly, the non-flammable electrolyte delays the onset of combustion in lithium metal soft pack batteries by 255 s and reduces the peak heat release by 21.02% under the continuous external high-temperature heating condition. The novel electrolyte can contribute immensely to developing high-electrochemical-performance and high-safety LMBs.     

High Performance Li Metal Anode Enabled by Robust Covalent Triazine Framework-Based Protective Layer

Advanced high-energy-density energy storage systems with high safety are desperately demanded to power electric vehicles and smart grids. Li metal batteries (LMBs) can provide a considerable leap in battery energy. Nevertheless, the widespread deployment of Li metal has long been fettered by the unstable solid electrolyte interlayer and uncontrolled Li dendrite growth induced safety concerns. Herein, a flexible and conformal CTF-LiI coating has been rationally coated on Li metal surface to stabilize metallic Li. With the CTF-LiI coating, the Li electrodeposition exhibits a uniform, dense, and dendrite-free manner; however, the side reactions between metallic Li and electrolyte have been effectively suppressed. The Li symmetric cells can run stably for a prolonged cycling over 2500 cycles at 10 mA cm⁻², demonstrating a much lower voltage hysteresis. In addition, the Li|Li₄Ti₅O₁₂ cells can deliver an improved long-time cycling over 250 cycles at 0.05 A g⁻¹. Furthermore, the half cells paired with the organic S cathode also demonstrate an excellent long lifespan stable cycling and a high capacity of 682.2 mAh g⁻¹ retained over 300 cycles with an average capacity decay of ≈0.05% per cycle at 1.0 A g⁻¹. This work demonstrates a significant step toward large-scalable and long-cycling stable LMBs.     

High‐Power Lithium Metal Batteries Enabled by High‐Concentration Acetonitrile‐Based Electrolytes with Vinylene Carbonate Additive

To enable next‐generation high‐power, high‐energy‐density lithium (Li) metal batteries (LMBs), an electrolyte possessing both high Li Coulombic efficiency (CE) at a high rate and good anodic stability on cathodes is critical. Acetonitrile (AN) is a well‐known organic solvent for high anodic stability and high ionic conductivity, yet its application in LMBs is limited due to its poor compatibility with Li metal anodes even at high salt concentration conditions. Here, a highly concentrated AN‐based electrolyte is developed with a vinylene carbonate (VC) additive to suppress Li⁺ depletion at high current densities. Addition of VC to the AN‐based electrolyte leads to the formation of a polycarbonate‐based solid electrolyte interphase, which minimizes Li corrosion and leads to a very high Li CE of up to 99.2% at a current density of 0.2 mA cm^‐2. Using such an electrolyte, fast charging of Li||NMC333 cells is realized at a high current density of 3.6 mA cm^‐2, and stable cycling of Li||NMC622 cells with a high cathode loading of 4 mAh cm^‐2 is also demonstrated.     

Liquid Polydimethylsiloxane Grafting to Enable Dendrite‐Free Li Plating for Highly Reversible Li‐Metal Batteries

Li‐metal is considered as the most promising anode material to advance the development of next‐generation energy storage devices owing to its unparalleled theoretical specific capacity and extremely low redox electrochemical potential. However, safety concerns and poor cycling retention of Li‐metal batteries (LMBs) caused by uncontrolled Li dendrite growth still limit their broad application. Herein, liquid polydimethylsiloxane (PDMS) terminated by –OCH₃ groups is proposed as a graftable additive to reinforce the anode dendrite suppression for LMBs. Such a grafting triggers the formation of a conformal hybrid solid electrolyte interphase (SEI) with increased fractions of LiF and Li–Si–O‐based moieties, which serve as a rigid barrier and ionic conductor for uniform Li‐ion flow and Li‐mass deposition. The grafting protected anode endows Li/Li symmetric cells with a long lifetime over 1800 h with a much smaller voltage gap (≈25 mV) between Li plating and stripping, than the naked anode. The coulombic efficiency values for Li/Cu asymmetric cells in carbonate electrolyte can reach up to 97% even at a high current density of 3 mA cm^?2 or high capacity up to 4 mAh cm^?2. The liquid PDMS additive shows advantage over solid siloxane additives with poor grafting ability in terms of Li surface compaction and SEI stabilization.     

Outer Helmholtz Plane Regulation and In Situ Zn Surface Reconstruction for Highly Reversible Zn Anodes

Metallic Zn, a promising anode for aqueous energy storage devices, suffers from uncontrolled dendrite growth and corrosion, leading to a short cycle life and low Coulombic efficiency (CE) in Zn-based batteries. Herein, a composite electrolyte including zinc sulfate, copper(II) chloride, and poly(N-diallyldimethylammonium chloride) (PDADMAC), denoted as PDADMAC–CuCl₂–ZnSO₄, is applied to simultaneously reconstruct the outer Helmholtz plane (OHP) and homogenize the Zn surface for highly reversible Zn anodes. The results of characterization, namely Raman spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, density functional theory calculations, and electrochemical tests, confirm that the addition of chloride ions promotes the adsorption of PDADMAC on the OHP of the electric double layer and controls the Zn deposition process by regulating the electric field. Simultaneously, in situ Zn surface homogenization is accomplished by the reaction of Cu²⁺ on the Zn surface. As a result, the highly reversible Zn anode sustains extremely long-term cycling for 2407 h at 5 mA cm⁻² with 5 mAh cm⁻² and 1300 h at 10 mA cm⁻² with 10 mAh cm⁻² in Zn//Zn symmetrical cells. A high average CE of 99.3% is achieved over 430 cycles at 15% depth of discharge.     

Stable Non-flammable Phosphate Electrolyte for Lithium Metal Batteries via Solvation Regulation by the Additive

The application of lithium metal batteries (LMBs) is impeded by safety concerns. Employing non-flammable electrolytes can improve battery reliability while the cost and performance deterioration limit their popularization. Herein, a high-performance non-flammable electrolyte is designed, 1.5 m LiTFSI in propylene carbonate (PC)/triethyl phosphate (TEP) (4:1 by vol.) with 4-nitrophenyl trifluoroacetate (TFANP) as the additive, which can facilitate the construction of LiF-rich solid electrolyte interphase (SEI) on Li anode surface and cathode electrolyte interphase (CEI) on cathode surface through its prioritized decomposition. In TFANP-containing electrolyte, the decreased TEP coordination number in the solvation sheath relieves the adverse effect of active TEP on both the SEI and CEI for suppressing the growth of Li dendrites and reducing the continuous electrolyte consumption. Thus, the Li||LiNi_0.6Co_0.2Mn_0.2O₂ battery with such an electrolyte can deliver 132 mAh g⁻¹ after 150 cycles with high coulombic efficiency (99.5%) and superior rate performance (110 mAh g⁻¹ at 5 C, 1 C = 200 mA g⁻¹). This work provides a new additive insight on non-flammable electrolyte for reliable LMBs.     

Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries

Lithium (Li) metal has been considered as an important substitute for the graphite anode to further boost the energy density of Li‐ion batteries. However, Li dendrite growth during Li plating/stripping causes safety concern and poor lifespan of Li metal batteries (LMB). Herein, fluoroethylene carbonate (FEC) additives are used to form a LiF‐rich solid electrolyte interphase (SEI). The FEC‐induced SEI layer is compact and stable, and thus beneficial to obtain a uniform morphology of Li deposits. This uniform and dendrite‐free morphology renders a significantly improved Coulombic efficiency of 98% within 100 cycles in a Li | Cu half‐cell. When the FEC‐protected Li metal anode matches a high‐loading LiNi_0.5Co_0.2Mn_0.3O₂ (NMC) cathode (12 mg cm^?2), a high initial capacity of 154 mAh g^?1 (1.9 mAh cm^?2) at 180.0 mA g^?1 is obtained. This LMB with conversion‐type Li metal anode and intercalation‐type NMC cathode affords an emerging energy storage system to probe the energy chemistry of Li metal protection and demonstrates the material engineering of batteries with very high energy density.     

An Intrinsically Nonflammable Electrolyte for Prominent-Safety Lithium Metal Batteries with High Energy Density and Cycling Stability

Nex-generation high-energy-density storage battery, assembled with lithium (Li)-metal anode and nickel-rich cathode, puts forward urgent demand for advanced electrolytes that simultaneously possess high security, wide electrochemical window, and good compatibility with electrode materials. Herein an intrinsically nonflammable electrolyte is designed by using 1 M lithium difluoro(oxalato)borate (LiDFOB) in triethyl phosphate (TEP) and N-methyl-N-propyl-pyrrolidinium bis(trifluoromethylsulfonyl)imide [Pyr₁₃][TFSI] ionic liquid (IL) solvents. The introduction of IL can bring plentiful organic cations and anions, which provides a cation shielding effect and regulates the Li⁺ solvation structure with plentiful Li⁺-DFOB⁻ and Li⁺-TFSI⁻ complexes. The unique Li⁺ solvation structure can induce stable anion-derived electrolyte/electrode interphases, which effectively inhibit Li dendrite growth and suppress side reactions between TEP and electrodes. Therefore, the LiNi_0.9Co_0.05Mn_0.05O₂ (NCM90)/Li coin cell with this electrolyte can deliver stable cycling even under 4.5 V and 60 °C. Moreover, a Li-metal battery with thick NCM90 cathode (≈ 15 mg cm⁻²) and thin Li-metal anode (≈ 50 µm) (N/P ≈ 3), also reveals stable cycling performance under 4.4 V. And a 2.2 Ah NCM90/Li pouch cell can simultaneously possess prominent safety with stably passing the nail penetration test, and high gravimetric energy density of 470 Wh kg⁻¹ at 4.4 V.     

Enabling High-Performance NASICON-Based Solid-State Lithium Metal Batteries Towards Practical Conditions

Solid-state lithium metal batteries (SSLMBs) are promising next-generation high-energy rechargeable batteries. However, the practical energy densities of the reported SSLMBs have been significantly overstated due to the use of thick solid-state electrolytes, thick lithium (Li) anodes, and thin cathodes. Here, a high-performance NASICON-based SSLMB using a thin (60 µm) Li_1.5Al_0.5Ge_1.5(PO₄)₃ (LAGP) electrolyte, ultrathin (36 µm) Li metal, and high-loading (8 mg cm⁻²) LiFePO₄ (LFP) cathode is reported. The thin and dense LAGP electrolyte prepared by hot-pressing exhibits a high Li ionic conductivity of 1 × 10⁻³ S cm⁻¹ at 80 °C. The assembled SSLMB can thus deliver an increased areal capacity of ≈1 mAh cm⁻² at C/5 with a high capacity retention of ≈96% after 50 cycles under 80 °C. Furthermore, it is revealed by synchrotron X-ray absorption spectroscopy and in situ high-energy X-ray diffraction that the side reactions between LAGP electrolyte and LFP cathode are significantly suppressed, while rational surface protection is required for Ni-rich layered cathodes. This study provides valuable insights and guidelines for the development of high-energy SSLMBs towards practical conditions.     

Spatially Controlled Lithium Deposition on Silver-Nanocrystals-Decorated TiO2 Nanotube Arrays Enabling Ultrastable Lithium Metal Anode

3D scaffolds and heterogeneous seeds are two effective ways to guide Li deposition and suppress Li dendrite growth. Herein, 3D TiO₂ nanotube (TNT) arrays decorated using ultrafine silver nanocrystals (7–10 nm) through cathodic reduction deposition are first demonstrated as a confined space host for lithium metal deposition. First, TiO₂ possesses intrinsic lithium affinity with large Li absorption energy, which facilitates Li capture. Then, ultrafine silver nanocrystals decoration allows the uniform and selective nucleation in nanoscale without a nucleation barrier, leading to the extraordinary formation of lithium metal importing into 3D nanotube arrays. As a result, Li metal anode deposited on such a binary architecture (TNT-Ag-Li) delivers a high Coulomb efficiency at around 99.4% even after 300 cycles with a capacity of 2 mA h cm⁻². Remarkably, TNT-Ag-Li exhibits ultralow overpotential of 4 mV and long-term cycling life over 2500 h with a capacity of 2 mAh cm^–2 in Li symmetric cells. Moreover, the full battery with 3D spaced Li nanotubes anode and LiFeO₄ cathode exhibits a stable and high capacity of 115 mA h g^–1 at 5 C and an excellent Coulombic efficiency of ≈100% over 500 cycles.     

In-Built Quasi-Solid-State Poly-Ether Electrolytes Enabling Stable Cycling of High-Voltage and Wide-Temperature Li Metal Batteries

Developing solid-state electrolytes with good compatibility for high-voltage cathodes and reliable operation of batteries over a wide-temperature-range are two bottleneck requirements for practical applications of solid-state metal batteries (SSMBs). Here, an in situ quasi solid-state poly-ether electrolyte (SPEE) with a nano-hierarchical design is reported. A solid-eutectic electrolyte is employed on the cathode surface to achieve highly-stable performance in thermodynamic and electrochemical aspects. This performance is mainly due to an improved compatibility in the electrode/electrolyte interface by nano-hierarchical SPEE and a reinforced interface stability, resulting in superb-cyclic stability in Li || Li symmetric batteries ( > 4000 h at 1 mA cm⁻²/1 mAh cm⁻²; > 2000 h at 1 mA cm⁻²/4 mAh cm⁻²), which are the same for Na, K, and Zn batteries. The SPEE enables outstanding cycle-stability for wide-temperature operation (15–100 ° C) and 4 V-above batteries (Li || LiCoO₂ and Li || LiNi_0.8Co_0.1Mn_0.1O₂). The work paves the way for development of practical SSMBs that meet the demands for wide-temperature applicability, high-energy density, long lifespan, and mass production.