Throughput performance of distributed applications in switched networks in presence of end‐system bottlenecks

The steady state throughput performance of distributed applications deployed in switched networks in presence of endsystem bottlenecks is studied in this paper. The effect of various limitations at an endsystem is modelled as an equivalent transmission capacity limitation. A class of distributed applications is characterised by a static traffic distribution matrix that determines the communication between various components of the application. It is found that uniqueness of steady state throughputs depends only on the traffic distribution matrix and that some applications (e.g., broadcast applications) can yield nonunique values for the steady state component throughputs. For a given switch capacity, with traffic distribution that yield fair unique throughputs, the tradeoff between the endsystem capacity and the number of application components is brought out. With a proposed distributed rate control, it has been illustrated that it is possible to have unique solution for certain traffic distributions which is otherwise impossible. Also, by proper selection of rate control parameters, various throughput performance objectives can be realised.     

Floor acquisition multiple access (FAMA) in single‐channel wireless networks

The FAMANCS protocol is introduced for wireless LANs and adhoc networks that are based on a single channel and asynchronous transmissions (i.e., no time slotting). FAMANCS (for floor acquisition multiple access with nonpersistent carrier sensing) guarantees that a single sender is able to send data packets free of collisions to a given receiver at any given time. FAMANCS is based on a threeway handshake between sender and receiver in which the sender uses nonpersistent carrier sensing to transmit a requesttosend (RTS) and the receiver sends a cleartosend (CTS) that lasts much longer than the RTS to serve as a busy tone that forces all hidden nodes to back off long enough to allow a collisionfree data packet to arrive at the receiver. It is shown that carrier sensing is needed to support collisionfree transmissions in the presence of hidden terminals when nodes transmit RTSs asynchronously. The throughput of FAMANCS is analyzed for singlechannel networks with and without hidden terminals; the analysis shows that FAMANCS performs better than ALOHA, CSMA, and all prior proposals based on collision avoidance dialogues (e.g., MACA, MACAW, and IEEE 802.11 DFWMAC) in the presence of hidden terminals. Simulation experiments are used to confirm the analytical results.     

MA‐WATM: A new approach towards an adaptive wireless ATM network

In a cellular multimedia network like wireless ATM (WATM), self control seems primordial. Our new approach is based on the application of DAI (distributed artificial intelligence) techniques in order to build a selfadaptive network within random nonuniform traffic conditions. Attempting to achieve a high network capacity in terms of resource allocation and air interface BER (bit error rate), we propose to apply intelligent agent features to enhance the architecture of WATM systems. In fact, the intelligent platform MAWATM (multiagent wireless ATM) is used to provide a flexible integration of the multiagent technique in wireless entities, BSs (base stations), MSs (mobile stations) and MSCs (mobile switching centers). Two applications are investigated and explored by simulations in order to bear out the feasibility of the multiagent approach.     

Dynamic capacity allocation and hybrid multiplexing techniques for ATM wireless LANs

We consider digital wireless multimedia LANs and timevarying traffic rates. To deal effectively with the dynamics of the timevarying traffic rates, a Traffic Monitoring Algorithm (TMA) is deployed to dynamically allocate channel capacities to the heterogeneous traffics. The TMA is implemented as a higher level protocol that dictates the capacity boundaries within two distinct framed transmission techniques: a Framed Time DomainBased (FTDB) technique and a Framed CDMA (FCDMA) technique. The performance of the TMA in the presence of the FTDB technique is compared to its performance in the presence of the FCDMA technique for some traffic scenarios. The performance metrics used for the TMAFTDB and TMAFCDMA combinations are channel capacity utilization factors, traffic rejection rates, and traffic delays. It is found that the TMAFTDB is superior to the TMAFCDMA when the speed of the transmission links is relatively low and the lengths of the transmitted messages are relatively short. As the speed of the transmission links and the length of the transmitted messages increase, the TMAFCDMA eventually outperforms the TMAFTDB.     

Assigning codes in wireless networks: bounds and scaling properties

In the Code Division Multiple Access (CDMA) framework, collisions that can occur in wireless networks are eliminated by assigning orthogonal codes to stations, a problem equivalent to that of coloring graphs associated to the physical network. In this paper we present new upper and lower bounds for two versions of the problem (hidden and primary collision avoidance – HPCA – or hidden collision avoidance only – HCA). In particular, optimal assignments for special topologies and heuristics for general topologies are proposed. The schemes show better average results with respect to existing alternatives. Furthermore, the gaps between the upper bound given by the heuristic solution, the lower bound obtained from the maximumclique problem, and the optimal solution obtained by branch and bound are investigated in the different settings. A scaling law is then proposed to explain the relations between the number of codes needed in Euclidean networks with different station densities and connection distances. The substantial difference between the two versions HPCA and HCA of the problem is investigated by studying the probabilistic distribution of connections as a function of the distance, and the asymptotic size of the maximum cliques.     

Demand re‐registration for PCS database restoration

In a Personal Communications Services (PCS) network, mobility databases such as Home Location Register (HLR) and Visitor Location Register (VLR) are utilized to support mobility management for Mobile Stations (MSs). If the location databases fail, the location information loss or corruption will seriously degrade the service offered to the subscribers. In this paper, we propose a new VLR failure recovery scheme called demand reregistration. In this scheme, the VLR broadcasts a reregistration request to all MSs after the VLR failure. When an MS receives the reregistration request, it sends a registration message to the VLR to recover the location record. Since all MSs will reregister after receiving the broadcasting request, traffic jam (and thus collisions) may occur. If a collision occurs, then the involved MSs must resend the registration messages. This paper studies the performance of demand reregistration by investigating how effectively the reregistration can recover the location record for an MS before the first MS call termination occurs. Our results indicate that demand reregistration can effectively recover VLR failure.     

Noise considerations for mixed‐signal RF IC transceivers

This paper discusses design tradeoffs for mixedsignal radio frequency integrated circuit (RF IC) transceivers for wireless applications in terms of noise, signal power, receiver linearity, and gain. During air wave transmission, the signal is corrupted by channel noise, adjacent interfering users, image signals, and multipath fading. Furthermore, the receiver corrupts the incoming signal due to RF circuit nonlinearity (intermodulation), electronic device noise, and digital switching noise. This tutorial paper gives an overview of the design tradeoffs needed to minimize RF noise in an integrated wireless transceiver. Fundamental device noise and the coupling of switching noise from digital circuits to sensitive analog sections and their impact on RF circuits such as frequency synthesizers are examined. Methods to minimize mixedsignal noise coupling and to model substrate noise effects are presented.     

Simulation‐based performance evaluation of routing protocols for mobile ad hoc networks

In this paper we evaluate several routing protocols for mobile, wireless, ad hoc networks via packetlevel simulations. The ad hoc networks are multihop wireless networks with dynamically changing network connectivity owing to mobility. The protocol suite includes several routing protocols specifically designed for ad hoc routing, as well as more traditional protocols, such as link state and distance vector, used for dynamic networks. Performance is evaluated with respect to fraction of packets delivered, endtoend delay, and routing load for a given traffic and mobility model. Both small (30 nodes) and medium sized (60 nodes) networks are used. It is observed that the new generation of ondemand routing protocols use much lower routing load, especially with small number of peertopeer conversations. However, the traditional link state and distance vector protocols provide, in general, better packet delivery and endtoend delay performance.     

The effects of asymmetry on TCP performance

In this paper, we study the effects of network asymmetry on endtoend TCP performance and suggest techniques to improve it. The networks investigated in this study include a wireless cable modem network and a packet radio network, both of which can form an important part of a mobile ad hoc network. In recent literature (e.g., [18]), asymmetry has been considered in terms of a mismatch in bandwidths in the two directions of a data transfer. We generalize this notion of bandwidth asymmetry to other aspects of asymmetry, such as latency and mediaaccess, and packet error rate, which are common in widearea wireless networks. Using a combination of experiments on real networks and simulation, we analyze TCP performance in such networks where the throughput achieved is not solely a function of the link and traffic characteristics in the direction of data transfer (the forward direction), but depends significantly on the reverse direction as well. We focus on bandwidth and latency asymmetries, and propose and evaluate several techniques to improve endtoend performance. These include techniques to decrease the rate of acknowledgments on the constrained reverse channel (ack congestion control and ack filtering), techniques to reduce source burstiness when acknowledgments are infrequent (TCP sender adaptation), and algorithms at the reverse bottleneck router to schedule data and acks differently from FIFO (acksfirst scheduling).     

The Satchel system architecture: Mobile access to documents and services

Mobile professionals require access to documents and documentrelated services, such as printing, wherever they may be. They may also wish to give documents to colleagues electronically, as easily as with paper, facetoface, and with similar security characteristics. The Satchel system provides such capabilities in the form of a mobile browser, implemented on a device that professional people would be likely to carry anyway, such as a pager or mobile phone. Printing may be performed on any Satchelenabled printer, or any fax machine. Scanning, too, may be accomplished at any Satchelenabled scanner. Access rights to individual documents may be safely distributed, without regard to document formats. Access to document services is greatly simplified by the use of context sensitivity. The system has been extensively tested and evaluated. This paper describes the architecture of the Satchel system.     

Admission control with priorities: Approaches for multi‐rate wireless systems

Priority based linkbandwidth partitioning is required to support wireless multimedia services, having diverse QoS (delay, throughput) requirements, in mobile ad hoc networks with multimedia nodes. A new class of service disciplines, termed batch and prioritize or BP admission control (AC), is proposed. The BP algorithms use the delay tolerance of applications to batch requests in time slots. Bandwidth assignment is made either at the end of the slot, or during the slot, on a priority basis. Analytical and simulation models are developed to quantify the performance of the BP schemes. The results are compared with those obtained for a FirstComeFirstServed (FCFS) service discipline. The class of BP schemes trade off the delay and loss tolerance of applications to improve the net carried traffic on the link. Further, such schemes enable an easy implementation for adaptive prioritization, where the degree of precedence given to an application varies with offered load and the link capacity.     

On proxy agents, mobility, and web access

With the emerging need for ubiquitous access to information, web access from mobile clients is gaining increasing importance. Unfortunately, the underlying protocols of the web are not designed to support operations from a resource poor platform in a low bandwidth, disconnection prone environment. Efforts to create systems to support mobile browsing have typically been proxybased. However, such solutions have recently been criticized due to their nonscalability. Developments in ad hoc networking also threaten the viability of proxybased approaches. In this paper, we critically examine the proxybased approach and its place in mobile access to the web in particular, and networked multimedia information in general. We argue for a hybrid approach that uses both proxybased and end–end techniques as appropriate, suggest when each is more appropriate, and present a preliminary implementation.     

Consistency management in Deno

We describe a new replicatedobject protocol designed for use in mobile and weaklyconnected environments. The protocol differs from previous protocols in combining epidemic information propagation with voting, and in using fixed perobject currencies for voting. The advantage of epidemic protocols is that data movement only requires pairwise communication. Hence, there is no need for a majority quorum to be available and simultaneously connected at any single time. The protocols increase availability by using voting, rather than primarycopy or primarycommit schemes. Finally, the use of perobject currencies allows voting to take place in an entirely decentralized fashion, without any server having complete knowledge of group membership. We show that currency allocation can be used to implement diverse policies. For example, uniform currency distributions emulate traditional voting schemes, while allocating all currency to a single server emulates a primarycopy scheme. We present simulation results showing both schemes, as well as the performance advantages of using currency proxies to temporarily reallocate currency during planned disconnections. Furthermore, we discuss an initial design of the underlying replicatedobject system and present a basic API.     

Adaptive disk spin‐down for mobile computers

We address the problem of deciding when to spin down the disk of a mobile computer in order to extend battery life. One of the most critical resources in mobile computing environments is battery life, and good energy conservation methods increase the utility of mobile systems. We use a simple and efficient algorithm based on machine learning techniques that has excellent performance. Using trace data, the algorithm outperforms several methods that are theoretically optimal under various worstcase assumptions, as well as the best fixed timeout strategy. In particular, the algorithm reduces the power consumption of the disk to about half of the energy consumed by a one minute fixed timeout policy. Furthermore, the algorithm uses as little as 88% of the energy consumed by the best fixed timeout computed in retrospect.     

Performance analysis of centralized FH‐CDMA wireless networks

Centralized CDMA networks with unslotted Aloha randomaccess mode are considered. Users communicate with a central node by sharing a finite number of signature sequences assigned to the receivers at the central node. Two methods for sharing preamble codes are considered. In one method a common preamble code is used by all receivers, and in the other method a distinct code is assigned for each receiver. A unified analysis framework for evaluating the performance of centralized FHCDMA networks is developed. Closed form expressions for packet decoding error probabilities are derived. Numerical results show that common preamble codes can support only low traffic levels. However, by appropriately selecting the design parameters, acceptable levels of packet loss probabilities are achievable with the receiverbased preambles.     

A low‐complexity multiuser detector for up‐link CDMA QPSK mobile radio communications

This paper deals with a multiuser detector based on a new decorrelating approach for asynchronous uplink DS/CDMA communications in which the QPSK modulation scheme is used in transmission. It is shown here that the receiver proposed is near–far resistant and exhibits a low complexity which allows realtime operation. Performance is expressed in terms of bit error rate (BER) which has been derived by simulations under the assumption of a slowly frequencyselective Rayleigh fading channel.     

Time‐varying modeling of a nonstationary signal

In this paper, a method for modeling a nonstationary signal using timevarying parameters by considering that the signal is generated by a linear, timevarying (LTV) system with a stationary white noise input is presented. This method is based on the Wold–Cramer (WC) representation of a nonstationary signal. Because the relationship between the generalized transfer function of an LTV system and the timevarying coefficients of the difference equation of a discretetime system is not addressed so far in the literature, therefore, in this paper a solution to this problem is proposed. A simple relationship between the system generalized transfer function and the timevarying parameters of the system is derived, then an MLS algorithm is developed to solve for the system timevarying parameters. Computer simulation illustrating the effectiveness of our algorithm is presented.     

A multi‐attribute shot segmentation algorithm for video programs

This paper describes a new algorithm for detecting cuts, thereby segmenting a video into shots. Our Webbased video library contains a large volume of news and documentary material; most of the transitions between shots in that type of programming are cuts, rather than dissolves or other complex transitions. We have developed an accurate multiattribute algorithm for detecting cuts in video programs. The algorithm uses a motion metric to identify a set of cuts, then uses luminance histograms to eliminate false cuts. Our experimental results show that this algorithm is more accurate than previous motionbased transition detection algorithms.     

An adaptive algorithm for optimizing the packet size used in wireless ARQ protocols

We develop an algorithm that allows an ARQ protocol to dynamically optimize the packet size based on estimates of the channel biterrorrate. Our algorithm is particularly useful for wireless and satellite channels where the biterrorrates tend to be relatively high and time variable. Our algorithm uses the acknowledgment history to make estimates of the channel biterrorrate, based on which the optimal packet size can be chosen. We develop a Markov chain model for the analysis of the system, under static channel conditions, and show that the algorithm can achieve close to optimal performance using a history of just 10,000 bits. We also use the Gilbert–Elliott twostate Markov channel to model dynamic channel conditions. We show, through simulation, that the algorithm performs well even under rapidly changing channel conditions. Finally, we discuss a maximum likelihood approach for choosing the packet size, which performs almost optimally but is much easier to implement.     

Wireless telecom silicon integration: analog design for radio,baseband and speech spectrum

The application today, pushing analog design for CMOS and RFbipolar into new frontiers is definitely the mobile radio telephony. New telecom systems like GSM, PCN, DECT, DCS, Wireless in the loop ... are all developing very rapidly and will enable us very soon to organise a complete telephone network with full coverage for your car, as well as in your kitchen and on your office desk. In Europe the major telecom companies have worked together to establish one common standard for cellular mobile radio communications at 900 MHz. Similar things are happening for other wireless personal communication systems. Basically the cellular radio telephone, the wireless PABX and the wireless SLIC are bringing the same challenges to analog circuit design: maximum integration of the basic radio functions into 1 or 2 silicon chips, CMOS, Bipolar or BiCMOS or GaAs. The analog circuit designer for radio telephone applications will need all the state of the art analog design knowhow available today, from RFmixers and GHz range low noise amplifiers and local oscillator synthesizers over base band 100 kHz CMOS analog to low frequency speech analog to digital conversion. And for all these circuits the message is: minimum power consumption for battery autonomy, minimum silicon area for maximum functional integration per die to obtain a small, low cost pocket size radio telephone.