A novel wideband and circularly polarized cross‐dipole antenna

In this paper, we present a novel wideband circularly polarized (CP) composite, called cavity‐backed crossed dipole antenna for 2.45 GHz industrial, scientific, and medical (ISM) band wireless communication. To excite the CP radiation effectively, a curved‐delay line providing an orthogonal phase difference among the cross‐dipole elements is attached at corners of the sequentially rotated elements. By choosing a proper radius of the curved‐delay line, a wide input impedance of the antenna can be realized. Unlike conventional cross‐dipole antennas, the proposed cross‐dipole antenna is designed with an open stub added to the radiating arms of the dipole so that both impedance and axial ratio bandwidths are enhanced. The antenna is center‐fed by a 50‐Ω coaxial cable and is placed above a cavity‐backed reflector to obtain a directional CP radiation pattern. With the advantage of being center‐fed, a symmetric CP radiation pattern can be achieved across the entire operating bandwidth. To further improve the directivity and the radiation pattern, a rectangular cavity‐backed reflector is used. Simulated and measured results confirm that the proposed antenna has good CP characteristics. The proposed antenna obtains a broad 3‐dB axial ratio bandwidth of 49% (1.20 GHz, 1.96–3.16 GHz) and an impedance bandwidth of 67.7% (1.66 GHz, 1.69–3.35 GHz) for reflection coefficient (S₁₁) ≦ −10 dB. It also yields an average CP gain of 9.2 dBic across the operating bandwidth and a peak CP gain of 10 dBic. Copyright © 2016 John Wiley & Sons, Ltd.     

Ku波段宽带高增益基片集成腔圆极化阵列天线北大核心CSCD

提出了一款应用于Ku波段的宽带高增益基片集成腔(Substrate Integrated Cavity,SIC)圆极化阵列天线。通过引入沿SIC口径面对角线放置的一对半月形寄生贴片和SIC底部馈电纵缝,使SIC中的TM_(211)和TM_(121)谐振模式幅值相等、相位相差90°,产生高增益圆极化辐射。同时,双寄生贴片还引入了一种背腔缝隙耦合振子圆极化辐射模式,扩宽了天线高增益圆极化辐射带宽。在此基础上,设计了一款2×2单元顺序旋转馈电的SIC圆极化阵列天线。阵列天线采用双层基片集成波导顺序相移馈电网络进行馈电,进一步增大了天线的圆极化带宽。综合考虑天线的-10 dB反射系数带宽、3 dB轴比带宽和3 dB增益带宽,测试结果表明,圆极化阵列天线的有效带宽为10.74-13.30 GHz(21.3%),在通带范围内最大增益为14.50 dBi。     

Design of a wideband Y-shaped antenna for the application in IoT and 5G communication

A small wideband Y-shaped antenna is presented in this paper. A monopole of Y-shaped with two rectangular-shape frequency shifting strip is used to produce a compact dimension of 10 mm × 12 mm on a 1-mm-thick FR4 substrate. The antenna has an impedance bandwidth (measured below ?10 dB from 39.57 to 44.63 GHz), a gain more than 4.9 dB, radiation efficiency of 81%, and voltage standing wave ratio (VSWR) < 2, within the bandwidth of interest, making it a viable option for 5G applications. The use of a (01.7850 × 2.6775 × 00.02) mm³ metallic strip located above the feed line is also shown to efficiently increase the antenna bandwidth to values greater than 5 GHz without affecting the other antenna parameters. Additionally, the measured results in comparison with the simulated results reveal negligible changes, confirming that the proposed antenna is also suitable for the applications of 5G with Internet of Things.     

Beam-Steerable Ultra-Wide-Band Miniaturized Elliptical Phased Array Antenna Using Inverted-L-Shaped Modified Inset Feed and Defected Ground Structure for 5G Smartphones Millimeter-Wave Applications

Multi Input Multi Output (MIMO) and phased array systems are considered a key technologies to realize the 5G communication systems. Therefore, the purpose of this research is the suggestion of a novel mm-wave Ultrawide Band (UWB) antenna design with compact and straightforward layout suitable for both MIMO and phased array systems. Hence, the designed antenna array has been studied separately as a MIMO antenna and as a phased array antenna to carefully assess the performance of each system. The single antenna design is an elliptical patch antenna where the design novelty lies in the combination of a modified inset-feed and defected ground structure to provide a large bandwidth without any compromise in the radiation performance, nor in antenna size and design simplicity. The Design process are performed using CST MWS software, where the Rogers RT/Duroid 5880 substrate is chosen to construct the antenna. A broadband characteristic of 8.7 GHz from 26 to 34.7 GHz with two resonant frequencies at 28 GHz and 33 GHz is obtained. A good radiation properties are achieved, where the gain is greater than 4.5 dB while the radiation efficiency exceeds 97% over the operating band. The MIMO and phased array antennas are made up of 12-elements of the single UWB-antenna arranged linearly along the width-edge of the smartphone mainboard. The MIMO antenna proves a high diversity performance in terms of Diversity Gain (DG), Envelope Correlation Coefficient (ECC), Total Active Reflection Coefficient (TARC), Channel Capacity Loss (CCL) and Mean Effective Gain (MEG), owing to the low mutual coupling less than ??20 dB, which is obtained using a separating slits between the elements. In addition, the suggested phased array provides a highly stable gain up to 15 dB over the entire bandwidth at broadside direction, besides the wide scanning range of?±?60° at 28 GHz and?±?40° at 33 GHz. Hence, the attained results assure that the suggested antenna could be appropriate for incorporation in 5G smartphones and other wireless devices and can be effectively used for both phased array and MIMO applications.

     

77‐GHz mmWave antenna array on liquid crystal polymer for automotive radar and RF front‐end module

This paper introduces a low‐cost, high‐performance mmWave antenna array module at 77 GHz. Conventional waveguide transitions have been replaced by 3D CPW‐microstrip transitions which are much simpler to realize. They are compatible with low‐cost substrate fabrication processes, allowing easy integration of ICs in 3D multi‐chip modules. An antenna array is designed and implemented using multilayer coupled‐fed patch antenna technology. The proposed 16 × 16 array antenna has a fractional bandwidth of 8.4% (6.5 GHz) and a 23.6‐dBi realized gain at 77 GHz.     

基于人工磁导体的低RCS微带天线设计

基于人工磁导体(AMC)的工作机理,设计了一款工作频率在X波段的低雷达散射截面(RCS)微带天线。设计了一种AMC单元,经X和Y极化波垂直入射在8.6~14.6 GHz的频带范围内,获得180°±37°的反射相位差;将其进行正交排列组成AMC棋盘结构的反射屏,反射屏中AMC阵列块由3×3的单元组成。仿真结果显示,该反射屏较相同尺寸的PEC板具有更小的后向RCS,将此AMC结构与工作频点为10 GHz的微带天线共面排布,在保持原有天线良好辐射性能和剖面高度的同时,在8.4~14.8 GHz的频率范围内对两种极化波垂直入射实现了不低于7.5 dB的RCS缩减量。     

一种新型波束可控的口径耦合天线

设计一种基于人工电磁结构（AMC）的新型口径耦合天线。对加载了AMC 结构的口径耦合天线进行仿真。 根据仿真结果,天线的工作频率为5.5GHz,辐射的波束指向21°时增益为6.4dB。文中对天线的参数进行分析,波束 的偏移角度与AMC 结构的有关。将AMC 结构变为一排,天线波束可以指向11°。根据天线单元构造1×2 的子阵, 阵列天线具有更高的增益和带宽,并可以有波束的偏移。 天线子阵工作在5.5GHz 时天线的波束指向为26°,增益 8.47dB。     

宽带高增益圆极化微带天线与阵列

设计了一副宽带高增益圆极化微带天线,并进行组阵分析。天线中心频率2.6 GHz,通过增加寄生贴片和空气层来提高天线单元的增益和带宽。上下两层介质板上边长不同的切角方形贴片分别激励一个低频与高频的圆极化模,有效地拓宽了轴比带宽。仿真结果表明,反射系数|S11|<-10 dB带宽21.8%,3 dB轴比带宽12.0%,中心频率点增益9.0 dBi。对天线单元进行加工测试,与仿真结果较为吻合。设计了2×4元阵列,并进行了仿真,增益提升至17.5 dBi,3 dB轴比带宽10.4%。     

A wideband high gain dielectric resonator antenna for RF energy harvesting application

A novel high gain and broadband hybrid dielectric resonator antenna (DRA) is designed and experimentally validated. To obtain the wide impedance bandwidth, the proposed antenna geometry combines the dielectric resonator antenna and an underlying slot with a narrow rectangular notch, which effectively broadens the impedance bandwidth by merging the resonances of the slot and DRA. An inverted T-shaped feed line is used to excite both antennas, simultaneously. It supports amalgamation of different resonant modes of the both, DRA and slot antenna. The measured results show that the proposed antenna offers an impedance bandwidth of 120% from 1.67 to 6.7 GHz. The antenna gain is next enhanced by a reflector placed below the antenna at an optimum distance. On engineering the height and dimension of this reflector the antenna gain is improved from 2.2 dBi to 8.7 dBi at 1.7 GHz. Finally, antenna operation is attested experimentally with a rectifier circuit in the frequency range of 1.8–3.6 GHz, where various strong radio signals are freely available for RF energy harvesting. The measured maximum efficiency of the rectifier and rectenna circuit were found to be 74.4% and 61.4%, respectively.     

Circularly polarized antenna array with a new sequential phase feed network utilizing directional coupler

This is a presentation of a new design of circularly polarized (CP) antenna array having a wide axial ratio (AR) bandwidth and high-gain. It uses an innovative feed network which consists of compact directional couplers and a delay line describing a new kind of sequential phase (SP) feed network. Furthermore, in this work, we report and discuss the features of the feed network and single element. In the following, the single element antenna and the 2 × 2 CP antenna array are designed, prototyped and tested. The antenna array is designed by a multilayer microstrip structure with a compact size of 75 × 52 mm². Moreover, a metal reflector is utilized to enhance the antenna gain and achieve a unidirectional radiation pattern over the operating frequency band. According to the experimental results, the CP antenna array has a return loss (RL) bandwidth of 2.42 GHz (5.83–8.25 GHz), AR bandwidth of 1.11 GHz (6.76–7.87 GHz), and peak gain of 12.15 dBic. It seems that the performance of the proposed design is admirable for C-band frequency.     

一种小型宽带双极化5G基站天线

设计了一种适用于2G/3G/4G/5G移动通信的小型宽带±45°双极化基站天线。该天线由2对偶极子辐射片、2条微带馈线和1块反射板组成,辐射臂和微带馈线采用双面印刷工艺印刷在0.8 mm厚的FR4板,并固定放置于开有圆形槽的反射板上。对天线实物进行加工测试,测试结果表明,端口1工作频段为1.82~3.60 GHz,端口2工作频段为1.64~3.41 GHz;工作频段内,反射系数小于-10 dB,端口隔离度优于18 dB;交叉极化比在视轴方向大于17 dB,±60°方向大于15 dB;半功率波束65°左右,前后比优于18 dB,测试和仿真结果较吻合。所设计天线带宽宽,尺寸小,且制作工艺简单,成本低廉,适合批量生产,应用于5G移动通信基站中。     

加载EBG反射板的圆极化偶极子天线

本文介绍了一种通过加载电磁带隙结构(Electromagnetic band gap,EBG)反射板来辐射圆极化电磁波的偶极子天线。该EBG反射板由矩形单元组成7×5阵列,印制偶极子天线谐振中心频点是5.2GHz。从仿真结果看,该偶极子天线能够有效地辐射圆极化波,阻抗带宽达到了0.65GHz,极化带宽达到了0.13GHz,天线增益达到了7.8 d B。     

基于超表面的低雷达散射截面宽频贴片阵列天线设计

该文设计了一种基于超表面(MS)的低雷达散射截面(RCS)宽频贴片阵列天线。该天线由工作在不同频段的两种开缝贴片天线组成2×4的八元阵,以此实现天线小型化并扩展其带宽,根据相位相消原理,将两种人工磁导体(AMC)以棋盘布阵的方式组成超表面加载到天线阵周围,使其具有低RCS特性。实测和仿真结果表明:加载超表面后,天线工作带宽由5.7~6.2 GHz扩展为5.6~6.6 GHz,相对带宽增大1倍,辐射特性基本保持不变;当平面波垂直入射时,天线单站RCS减缩效果明显,其中,X极化波下3 dB减缩带宽为5.3~7.0 GHz,最大减缩量达31 dB,Y极化波下3 dB减缩带宽为5.8~6.9 GHz。     

Angled Split-Ring Artificial Magnetic Conductor for Gain Enhancement in Microstrip Patch Antenna for Wireless Applications

A multiband rectangular microstrip patch antenna integrated with angled split- ring artificial magnetic conducting (AMC) structure is proposed. In order to achieve high gain, directivity and radiation efficiency, an \(3\times 2\) array of proposed angled split-ring patches which has multiple in-phase reflection phase characteristics at S-band (2–4 GHz) is presented as a reflector. A rectangular microstrip patch antenna integrated with the proposed angled split-ring AMC is fabricated, tested and its parameters are compared with the microstrip patch antenna backed with a flat metal sheet, and microstrip patch antenna integrated with conventional split-ring AMC structure. The presence of high scattered field amplitude between the angled arms lead to improved radiation characteristics and make the antenna more suitable for real-time wireless applications. The antenna attains 2.138 dBi increment in gain and 1.87 dBi increment in directivity when it is backed with the proposed angled split-ring artificial magnetic conducting structure instead of a flat metal sheet. A good pact is obtained between the simulated and the measured results.     

Graphene based tunable and wideband terahertz antenna for wireless network communication

A wide band terahertz dipole-antenna using graphene with tunable resonant frequency is proposed. Presence of graphene in the antenna is shown to electrically tune resonant frequency and to push the antenna to resonate with multibands in terahertz regime. The proposed terahertz antenna shows maximum of five tuning frequencies and better performance parameters such as return loss of ?? 39.7 dB, maximum directivity of 9.3 dB, five resonant tuning frequencies (multi resonances) at chemical voltage of 0.5 eV, maximum fractional bandwidth of 15.6%, maximum radiation efficiency of 21.5% and large bandwidth of 2.32 THz. Large bandwidth of the antenna can be very useful for highest possible data transfer among wireless devices. The proposed graphene based terahertz antenna has the dimensions of few micrometers so miniaturization i.e. size is reduced to 0.007 mm² which is suitable for size limited future applications such as Wireless Networks on Chip, software defined meta material and Wireless Nano Sensor Networks (WNSNs). Size of the proposed terahertz antenna is less than that reported in the literature. One reconfigurable and miniaturized antenna may replace a number of single function radiators, thereby also cost and size of a WNSNs can be abridged while performance is improved.

     

Cylindrical ring dielectric loaded horizontally polarized omnidirectional antenna for wideband radiation

A wideband horizontally polarized omnidirectional antenna with a cylindrical ring dielectric (CRD) loaded is proposed. Compared with the conventional alford-structure loop antenna (ASLA), the impedance and radiation pattern bandwidths are broadened by loading a CRD to the ASLA with two wing sections. The designed antenna is fabricated and measured, and good performance has been obtained. The measured reflection coefficient is less than −10 dB over the frequency band 1.63–2.8 GHz, i.e., 52.8%, which can cover 2G/3G/LTE band totally. The gain variation in all directions of horizontal plane is less than 1.4 dB in the whole band. The maximum gain is 1.56dBi throughout the operating band and it appears at 1.66 GHz. It is worth noting that the gain is around 1dBi and almost constant from 1.9 GHz to 2.7 GHz. Besides, the designed antenna has a compact size of 0.55λ × 0.55λ × 0.057λ, λ is for the lowest frequency of the operating band.     

Design of wideband dual-band dual-polarized dipole for base station antenna

This article put forward a novel dual-band dual-polarized magneto-electric dipole antenna excited by F-shaped strips. The proposed antenna achieved a common impedance bandwidth of 25.5% and 39.5% in the lower and the upper bands at both input ports, ranged from 0.75 GHz to 0.97 GHz and from 1.73 GHz to 2.59 GHz respectively. The antenna has good performance in isolation, which is more than ?32 dB between the two input ports, and the gain of the antenna is average 4.3 dB and 7.8 dB in the lower and upper bands. The antenna has a stable broadside radiation pattern with low cross polarization and low back lobe radiation over the operating band. Metallic side walls on the ground are added for better performance in gain and radiation pattern.     

Multi-Element Wideband Planar Antenna for Wireless Applications

A wideband, multi-standard MIMO antenna with hexagonal geometry and slot is proposed for DCS/PCS/LTE/UMTS applications while keeping the real time application at prime to provide high data rate, low latency, high capacity, non-line-of communication, and reliability with continuity. The designed prototype covers 1.64–2.50 GHz frequency band with percentage bandwidth of 41.55% and resonates at 2.1 GHz. The isolation of more than 10 dB is achieved in the 2:1 VSWR frequency band. The total bandwidth of the MIMO antenna is 860 MHz. The designed MIMO has peak gain of 5.4 dBi, ECC?<?0.06, radiation efficiency?>?88%, and total efficiency?>?71%. The TARC active bandwidth is 600 MHz with best excitation angles of 45°, 45° at ports. The hexagonal slot is used for the control of induced current for better isolation. The proposed MIMO antenna evaluates the SAR performance at resonant frequency for listening, holding, and watching positions, and is found under the required safety norms.

     

A Double-sided Printed Dipole Array with an Electromagnetic Band-Gap Reflector

Electromagnetic band-gap (EBG) structures have unique properties in controlling the propagation of electromagnetic wave and have been applied to a wide range of electromagnetic devices design. In this paper, a double-sided printed dipole (DSPD) array backed by an EBG reflector is proposed for achieving a low-profile design as well as gain enhancement. Simulation results show that a reduction of more than 55% in antenna height can be obtained by placing the DSPD array over an EBG reflector rather than a perfect electric conductor (PEC) reflector. And the obtained gain of the antenna with an EBG reflector is about 1.9 dB higher than that with a PEC reflector at the operating frequency 2.77 GHz. The EBG reflector can be utilized to reduce a cavity-backed antenna height and enhance the antenna radiation efficiency. The design has a good potential application to antenna arrays with more elements in wireless communication.     

Design of a wideband miniature dielectric-filled waveguide antennafor collision-avoidance radar

This article presents a theoretical and experimental study of the design of a miniaturized wideband dielectric-filled waveguide (DFW) antenna. The operational frequency is X band, i.e., 9.0⩽f⩽10.5 GHz. The desired bandwidth is 1.5 GHz. The antenna uses an air-gap matching network to reduce its high aperture reflection. In order to ease the integration with antenna circuits and to increase the bandwidth, two E-plane steps are used. The antenna is designed to have -3 dB beamwidths of 60° and 100° for the E- and H-plane patterns, respectively. An input reflection of less than -10 dB for the desired bandwidth is observed. The gain of the antenna is 7 dBi. A cross-polar level of less than -25 dB is achieved. This article discusses the mathematical model for input reflection, the design scenarios, and the experimental results