Thermal Stability of Thermoelectric Zn<Subscript>4</Subscript>Sb<Subscript>3</Subscript>

The thermal stability of the thermoelectric Zn₄Sb₃ has been investigated by synchrotron power diffraction measurements in the temperature range of 300 K to 625 K in a capillary sealed under Ar. Data were also collected in air on a 1% Cd-doped sample. Rietveld refinements of the data indicate that a variety of impurity phases are formed. After heat treatment, more than 85% of the Zn₄Sb₃ phase remains in the 1% Cd-doped sample heated in air, and 97% remains in the undoped Zn₄Sb₃ heated in Ar. These stabilities are better than those previously observed in pure samples heated in air. This suggests that doping, as well as oxygen or oxidation impurities, play important roles in the thermal stability of this compound.     

Low-Temperature Thermoelectric Properties of Co<Subscript>0.9</Subscript>Fe<Subscript>0.1</Subscript>Sb<Subscript>3</Subscript>-Based Skutterudite Nanocomposites with FeSb<Subscript>2</Subscript> Nanoinclusions

Bulk thermoelectric nanocomposite materials have great potential to exhibit higher ZT due to effects arising from their nanostructure. Herein, we report low-temperature thermoelectric properties of Co_0.9Fe_0.1Sb₃-based skutterudite nanocomposites containing FeSb₂ nanoinclusions. These nanocomposites can be easily synthesized by melting and rapid water quenching. The nanoscale FeSb₂ precipitates are well dispersed in the skutterudite matrix and reduce the lattice thermal conductivity due to additional phonon scattering from nanoscopic interfaces. Moreover, the nanocomposite samples also exhibit enhanced Seebeck coefficients relative to regular iron-substituted skutterudite samples. As a result, our best nanocomposite sample boasts a ZT = 0.041 at 300 K, which is nearly three times as large as that for Co_0.9Fe_0.1Sb₃ previously reported.     

Preparation and Thermoelectric Characterization of SiC-B<Subscript>4</Subscript>C Composites

SiC-B₄C composites with various values of SiC-to-B₄C ratio and grain size were fabricated by pressureless sintering. This paper presents the results of current investigations of this composite material. This includes the parameters of manufacture (shrinkage, density, and open porosity), thermoelectric properties (electrical and thermal conductivity, and thermopower), and material characterization (x-ray diffraction, scanning electron microscopy, oxidation resistance, and thermal expansion). The results indicate high potential of this composite as an alternative material for thermoelectric applications at high temperatures. The Seebeck coefficient of the composite was higher than that of the single-component materials B₄C and SiC and reached 400 μV/K at 500°C.     

Electrical and Thermal Conductivity and Conduction Mechanism of Ge<Subscript>2</Subscript>Sb<Subscript>2</Subscript>Te<Subscript>5</Subscript> Alloy

Ge₂Sb₂Te₅ alloy has drawn much attention due to its application in phase-change random-access memory and potential as a thermoelectric material. Electrical and thermal conductivity are important material properties in both applications. The aim of this work is to investigate the temperature dependence of the electrical and thermal conductivity of Ge₂Sb₂Te₅ alloy and discuss the thermal conduction mechanism. The electrical resistivity and thermal conductivity of Ge₂Sb₂Te₅ alloy were measured from room temperature to 823 K by four-terminal and hot-strip method, respectively. With increasing temperature, the electrical resistivity increased while the thermal conductivity first decreased up to about 600 K then increased. The electronic component of the thermal conductivity was calculated from the Wiedemann–Franz law using the resistivity results. At room temperature, Ge₂Sb₂Te₅ alloy has large electronic thermal conductivity and low lattice thermal conductivity. Bipolar diffusion contributes more to the thermal conductivity with increasing temperature. The special crystallographic structure of Ge₂Sb₂Te₅ alloy accounts for the thermal conduction mechanism.     

Thermoelectric Properties of Zintl Compound YbZn<Subscript>2</Subscript>Sb<Subscript>2</Subscript> with Mn Substitution in Anionic Framework

The thermoelectric properties of the Zintl compound YbZn₂Sb₂ with isoelectronic substitution of Zn by Mn in the anionic (Zn₂Sb₂)²⁻ framework have been studied. The p-type YbZn_2−x Mn _x Sb₂ (0.0 ≤ x ≤ 0.4) samples were prepared via melting followed by annealing and hot-pressing. Thermoelectric property measurement showed that the Mn substitution effectively lowered the thermal conductivity for all the samples, while it significantly increased the Seebeck coefficient for x < 0.2. As a result, a dimensionless figure of merit ZT of approximately 0.61 to 0.65 was attained at 726 K for x = 0.05 to 0.15, compared with the ZT of ~0.48 in the unsubstituted YbZn₂Sb₂.     

Thermoelectric Properties of Co<Subscript>4</Subscript>Sn<Subscript>6</Subscript>Se<Subscript>6</Subscript> Ternary Skutterudites

A ternary ordered variant of the skutterudite structure, the Co₄Sn₆Se₆ compound, was prepared. Polycrystalline samples were prepared by a modified ceramic method. The electrical conductivity, the Seebeck coefficient and the thermal conductivity were measured over a temperature range of 300–800 K. The undoped Co₄Sn₆Se₆ compound was of p-type electrical conductivity and had a band gap E _g of approximately 0.6 eV. The influence of transition metal (Ni and Ru) doping on the thermoelectric properties was studied. While the thermal conductivity was significantly lowered both for the undoped Co₄Sn₆Se₆ compound and for the doped compounds, as compared with the Co₄Sb₁₂ binary skutterudite, the calculated ZT values were improved only slightly.     

Thermal Stability of Barium and Indium Double-Filled Skutterudite Ba<Subscript>0.3</Subscript>In<Subscript>0.2</Subscript>Co<Subscript>3.95</Subscript>Ni<Subscript>0.05</Subscript>Sb<Subscript>12</Subscript> Coated by SiO<Subscript>2</Subscript> Nanoparticles

Filled skutterudite thermoelectric (TE) materials have been extensively studied to search for better TE materials in the past decade. However, there is no detailed investigation about the thermal stability of filled skutterudite TE materials. The evolution of microstructure and TE properties of nanostructured skutterudite materials fabricated with Ba_0.3In_0.2Co_3.95Ni_0.05Sb₁₂/SiO₂ core–shell composite particles with 3 nm thickness shell was investigated during periodic thermal cycling from room temperature to 723 K in this work. Scanning electronic microscopy and electron probe microscopy analysis were used to investigate the microstructure and chemical composition of the nanostructured skutterudite materials. TE properties of the nanostructured skutterudite materials were measured after every 200 cycles of quenching in the temperature range from 300 K to 800 K. The results show that the microstructure and composition of Ba_0.3In_0.2Co_3.95Ni_0.05Sb₁₂/SiO₂ nanostructured skutterudite materials were more stable than those of single-phase Ba_0.3In_0.2Co_3.95Ni_0.05Sb₁₂ bulk materials. The evolution of TE properties indicates that the electrical and thermal conductivity decrease along with an increase in the Seebeck coefficient with increasing quenching up to 2000 cycles. As a result, the dimensionless TE figure of merit (ZT) of the nanostructured skutterudite materials remains almost constant. It can be concluded that these nanostructured skutterudite materials have good thermal stability and are suitable for use in solar power generation systems.     

Thermoelectric Properties of Co<Subscript>4</Subscript>Sb<Subscript>12</Subscript> Skutterudite Materials with Partial In Filling and Excess In Additions

The properties of Co₄Sb₁₂ with various In additions were studied. X-ray diffraction revealed the presence of the pure δ-phase of In_0.16Co₄Sb₁₂, whereas impurity phases (γ-CoSb₂ and InSb) appeared for x = 0.25, 0.40, 0.80, and 1.20. The homogeneity and morphology of the samples were observed by Seebeck microprobe and scanning electron microscopy, respectively. All the quenched ingots from which the studied samples were cut were inhomogeneous in the axial direction. The temperature dependence of the Seebeck coefficient (S), electrical conductivity (σ), and thermal conductivity (κ) was measured from room temperature up to 673 K. The Seebeck coefficient of all In-added Co₄Sb₁₂ materials was negative. When the filler concentration increases, the Seebeck coefficient decreases. The samples with In additions above the filling limit (x = 0.22) show an even lower Seebeck coefficient due to the formation of secondary phases: InSb and CoSb₂. The temperature variation of the electrical conductivity is semiconductor-like. The thermal conductivity of all the samples decreases with temperature. The central region of the In_0.4Co₄Sb₁₂ ingot shows the lowest thermal conductivity, probably due to the combined effect of (a) rattling due to maximum filling and (b) the presence of a small amount of fine-dispersed secondary phases at the grain boundaries. Thus, regardless of the non-single-phase morphology, a promising ZT (S ² σT/κ) value of 0.96 at 673 K has been obtained with an In addition above the filling limit.     

Thermoelectric Properties of Cu-doped Bi<Subscript>0.4</Subscript>Sb<Subscript>1.6</Subscript>Te<Subscript>3</Subscript> Prepared by Hot Extrusion

Cu_0.003Bi_0.4Sb_1.6Te₃ alloys were prepared by using encapsulated melting and hot extrusion (HE). The hot-extruded specimens had the relative average density of 98%. The (00l) planes were preferentially oriented parallel to the extrusion direction, but the specimens showed low crystallographic anisotropy with low orientation factors. The specimens were hot-extruded at 698 K, and they showed excellent mechanical properties with a Vickers hardness of 76 Hv and a bending strength of 59 MPa. However, as the HE temperature increased, the mechanical properties degraded due to grain growth. The hot-extruded specimens showed positive Seebeck coefficients, indicating that the specimens have p-type conduction. These specimens exhibited negative temperature dependences of electrical conductivity, and thus behaved as degenerate semiconductors. The Seebeck coefficient reached the maximum value at 373 K and then decreased with increasing temperature due to intrinsic conduction. Cu-doped specimens exhibited high power factors due to relatively higher electrical conductivities and Seebeck coefficients than those of undoped specimens. A thermal conductivity of 1.00 Wm^?1 K^?1 was obtained at 373 K for Cu_0.003Bi_0.4Sb_1.6Te₃ hot-extruded at 723 K. A maximum dimensionless figure of merit, ZT _max = 1.05, and an average dimensionless figure of merit, ZT _ave = 0.98, were achieved at 373 K.     

Molecular Dynamics Study of the Mechanical Behavior of Zn<Subscript>4</Subscript>Sb<Subscript>3</Subscript> Nanofilms

This paper reports molecular dynamics simulations performed to study the mechanical properties of Zn₄Sb₃ nanofilms. In the simulations, interatomic interactions are represented by an enhanced atomic potential, and the crystal structure is based on the core structure of β-Zn₄Sb₃. For tensile loading along the [0 1 0] direction, the stability of the crystal structure of the Zn₄Sb₃ nanofilms is analyzed by the radial distribution function method, and the stress–strain relation of the nanofilms is obtained at room temperature. Our present work indicates that the mechanical properties of Zn₄Sb₃ nanofilms are quite different from those of bulk Zn₄Sb₃ due to the impact of surface atoms of the nanostructure. From the atomic configuration, Zn₄Sb₃ nanofilms exhibit typical brittleness. The size effect and the strain-rate effect on the extension of Zn₄Sb₃ nanofilms are discussed in detail. Lastly, the mechanical properties of nanofilms based on different Zn₄Sb₃ crystal structure models are examined.     

Thermoelectric Properties of Mo<Subscript>3</Subscript>Sb<Subscript>5.4</Subscript>Te<Subscript>1.6</Subscript> and Ni<Subscript>0.06</Subscript>Mo<Subscript>3</Subscript>Sb<Subscript>5.4</Subscript>Te<Subscript>1.6</Subscript>

Mo₃Sb₇, crystallizing in the Ir₃Ge₇ type structure, has poor thermoelectric (TE) properties due to its metallic behavior. However, by a partial Sb-Te exchange, it becomes semiconducting without noticeable structure changes and so achieves a significant enhancement in the thermopower with the composition of Mo₃Sb₅Te₂. Meanwhile, large cubic voids in the Mo₃Sb₅Te₂ crystal structure provide the possibility of filling the voids with small cations to decrease the thermal conductivity by the so-called rattling effect. As part of the effort to verify this idea, we report herein the growth as well as measurements of the thermal and electrical transport properties of Mo₃Sb_5.4Te_1.6 and Ni_0.06Mo₃Sb_5.4Te_1.6.     

Effect of Electric Current on the Performance of Bi<Subscript>1.2</Subscript>Sb<Subscript>4.8</Subscript>Te<Subscript>9</Subscript> Thermoelectric Material Prepared by a Field-Activated Pressure-Assisted Sintering Process

Field-activated pressure-assisted sintering (FAPAS) was applied to sinter Bi_1.2Sb_4.8Te₉ thermoelectric materials under different conditions, including no-current sintering (NCS), low-density current sintering (LCS), and high-density current sintering (HCS). The effect of the current density on the final thermoelectric performance of the products was investigated. Applying a higher-density electric current and shorter dwell time can improve the thermoelectric performance of the sample by increasing its electric conductivity and decreasing its thermal conductivity. The maximum figure of merit ZT values of the NCS, LCS, and HCS samples were 0.46, 0.48, and 0.57, respectively. Therefore, applying a high-density electric current in the sintering process may be an effective way to obtain Bi_1.2Sb_4.8Te₉ thermoelectric material with high ZT value.     

Thermoelectric Properties of Ca-Filled CoSb<Subscript>3</Subscript>-Based Skutterudites Synthesized by Mechanical Alloying

Ca _z Co_4−x (Fe/Mn) _x Sb₁₂ skutterudites were prepared by mechanical alloying and hot pressing. The phases of mechanically alloyed powders were identified as γ-CoSb₂ and Sb, but they were transformed to δ-CoSb₃ by annealing at 873 K for 100 h. All specimens had a positive Hall coefficient and Seebeck coefficient, indicating p-type conduction by holes as majority carriers. For the binary CoSb₃, the electrical conductivity behaved like a nondegenerate semiconductor, but Ca-filled and Fe/Mn-doped CoSb₃ showed a temperature dependence of a degenerate semiconductor. While the Seebeck coefficient of intrinsic CoSb₃ increased with temperature and reached a maximum at 623 K, the Seebeck coefficient increased with increasing temperature for the Ca-filled and Fe/Mn-doped specimens. Relatively low thermal conductivity was obtained because fine particles prepared by mechanical alloying lead to phonon scattering. The thermal conductivity was reduced by Ca filling and Fe/Mn doping. The electronic thermal conductivity was increased by Fe/Mn doping, but the lattice thermal conductivity was decreased by Ca filling. Reasonable thermoelectric figure-of-merit values were obtained for Ca-filled Co-rich p-type skutterudites.     

Effect of Cyclic Thermal Loading on the Microstructure and Thermoelectric Properties of CoSb<Subscript>3</Subscript>

The effect of cyclic thermal loading on the microstructure and thermoelectric properties of CoSb₃ was investigated. The microstructures of the samples were characterized by x-ray diffractometry, scanning electron microscopy, energy dispersive x-ray spectrometry and density measurements. The electrical conductivity, the Seebeck coefficient and the thermal conductivity were measured from room temperature to 800 K. Under cyclic thermal loading, antimony partially volatilized from the surface of the sample, and the density obviously decreased. After 2000 cycles, the phase composition of the sample remained stable, and the average grain size did not change significantly. Moreover, the electrical conductivity varied only slightly, except in the low temperature region. The Seebeck coefficient decreased slightly. However, the thermal conductivity changed remarkably with increasing numbers of thermal cycles.     

Thermoelectric properties of Bi<Subscript>0.5</Subscript>Sb<Subscript>1.5</Subscript>Te<Subscript>3</Subscript> ribbons prepared by melt spinning

The results of studying the thermoelectric properties of p-type Bi_0.5Sb_1.5Te₃ alloy samples prepared by melt spinning quenching are presented. The material after melt spinning is shaped as thin ribbons and has a quasi-amorphous structure. The thermoelectric properties (thermoelectric power and electrical resistance) and crystallization processes of as-prepared melt-spun ribbons are studied at 300–800 K for the first time. The stability range of the initial state, the crystallization-onset temperature, and the effect of thermal annealing on the thermoelectric-power factor of the alloy are determined.     

Thermoelectric Properties of the Pseudobinary Alloy (Ag<Subscript>0.365</Subscript>Sb<Subscript>0.558</Subscript>Te)<Subscript>0.975</Subscript>(GeTe)<Subscript>0.025</Subscript> Prepared by Spark Plasma Sintering

Ag-Sb-Te-Ge-based alloys have received great attention in recent years. In the present work we prepared the pseudobinary alloy (Ag_0.365Sb_0.558Te)_0.975 (GeTe)_0.025 using spark plasma sintering and evaluated its thermoelectric (TE) properties over the temperature range from 318 K to 551 K. Rietveld analysis revealed that about 1.3 at.% Ge atoms occupy the Sb sites and that the alloy exhibits the same crystal structure as AgSbTe₂. By using back-scattered electron imaging, we observed two instead of one phase in the sample. The small white AgSbTe₂ chunks embedded in the matrix can substantially scatter phonons. Compared with the transport properties of Ag_0.365Sb_0.558Te, we obtained a slightly increased Seebeck coefficient and reduced thermal conductivity without sacrificing electrical conductivity. The highest TE figure of merit, ZT, was 0.69 at 551 K, whereas that of the ternary alloy Ag_0.365Sb_0.558Te was 0.61 at the corresponding temperature, suggesting that (Ag_0.365Sb_0.558Te)_0.975(GeTe)_0.025 has the potential to improve TE performance with optimization of its chemical composition.     

Preparation and properties of Zn<Subscript>4</Subscript>Sb<Subscript>3</Subscript>-based thermoelectric material

The effect of synthesis conditions on the structure and thermoelectric properties of zinc-antimonide- based materials is investigated. The effects of Zn excess, the modes of spark plasma sintering, and In doping on the phase composition and the thermal stability of the properties of the obtained material are considered. The material is prepared by the method of the direct alloying of components and spark plasma sintering. It is shown that, at certain modes of spark plasma sintering, the introduction of an excess amount of Zn and In doping make it possible to obtain β-Zn₄Sb₃ with the thermoelectric efficiency ZT ≈ 1.47 at a temperature of 720 K, which shows the stability of characteristics under the performed tests.     

Antimony-Based Compounds with the Anti-Th<Subscript>3</Subscript>P<Subscript>4</Subscript> Structure as Potential High-Temperature Thermoelectric Materials

We present a combined experimental and theoretical study of thermoelectric properties and lattice dynamics of the R₄Sb₃ (R = La, Yb) compounds with the anti-Th₃P₄ structure. Bi alloying of Yb₄Sb₃ was found to improve the thermoelectric properties but not as well as La or Sm alloying. From the band structure, we are able to explain the origin of the relatively large and positive thermopower in Yb₄Sb₃ and of the small and negative thermopower found in La₄Sb₃ at high temperatures. Since the contribution of the 4f level of Yb atoms must be negative, as in other intermediate valence Yb-based compounds, the positive thermopower in Yb₄Sb₃ is due to the conduction electrons. We conjecture that the origin of the low thermal conductivity is similar to that of skutterudites, i.e., due to hybridization between acoustic and low-energy optical modes of the same symmetry.     

Synthesis and Thermoelectric Properties of the Double-Filled Skutterudite Yb<Subscript>0.2</Subscript>In<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>Co<Subscript>4</Subscript>Sb<Subscript>12</Subscript>

Filled skutterudites have long been singled out as one of the prime examples of phonon glass electron crystal materials. Recently the double-filling approach in these materials has been attracting increased attention. In this study, Yb_0.2In _y Co₄Sb₁₂ (y = 0.0 to 0.2) samples have been prepared by a simple melting method and their thermoelectric properties have been investigated. The power factor is increased dramatically when increasing the In content, while the lattice thermal conductivity is lowered considerably, leading to a large increase of the ZT value. A state-of-the-art ZT value of 1.0 is attained in Yb_0.2In_0.2Co₄Sb₁₂ at 750 K.     

Preparation and Thermoelectric Properties of Nanoporous Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript>-Based Alloys

n-Type nanoporous Bi₂Te₃-based thermoelectric materials with different porosity ratios have been prepared by spark plasma sintering (SPS). The microstructure and phase morphology have been analyzed by x-ray diffraction (XRD) and field-emission scanning electron microscopy (FESEM), and the thermoelectric properties of the SPS samples have been measured. Experimental results show that the nanoporous structures lying in the sheet layers and among the plate grains of the Bi₂Te₃ bulk material can lead to an increase in the Seebeck coefficient and a decrease in the thermal conductivity, thus leading to an enhanced figure of merit.