共查询到20条相似文献,搜索用时 140 毫秒
1.
对偶原理是分析电力电子电路拓扑结构的有力工具。本文根据图论中图的对偶概念,对电力电子电路进行了对偶性分析,介绍了电力电子电路对偶变换的方法。由于对偶原理只适用于平面电路,本文还通过新的概念定义以及适当的变换方法将对偶原理的应用扩展到了非线性电力电子器件与非平面电路中。文中最后举例说明了对偶原理在电力电子拓扑结构中的重要作用。 相似文献
2.
科学技术水平的提高,使诸多电力电子设备被应用于各个领域当中,极大推动了各个领域的发展.由于电力电子电路的设计非常复杂,设计周期往往较长,对电力电子电路的参数修改较为麻烦等缺陷,致使电力电子电路的设计产品在精度与可靠性方面受到很大影响.对电力电子电路的I波形与V波形进行波形分析,能够为电力电子电路的优化设计提供科学的指导,但由于其I波形与V波形较为复杂,这使波形分析面临着很大的困难.因此必须采取相应的措施来予以改进,而Multisim技术的出现为电力电子电路的优化设计提供了全新的方向.为此,本文便基于Multisim技术对电力电子电路的相关优化设计方法进行深入的研究与探讨. 相似文献
3.
4.
5.
从电力电子电路数字化控制的要求出友,对分别由单片机、数字信号处理器(DSP)以及微型计算机等为主构成的电力电子电路的计算机控制系统进行了详细介绍和比较分析,指出了电力电子电路新型控制技术的发展方向。 相似文献
6.
本文从待诊断逆变电源系统和实验验证这两个方面,对基于DSP的人工神经网络电力电子电路故障诊断展开了详细的研究,希望能为基于DSP的人工神经网络在电力电子电路故障诊断中的应用提供一定的理论参考. 相似文献
7.
Multisim在电力电子电路仿真中的应用 总被引:1,自引:0,他引:1
随着电力电子技术的不断发展,电力电子电路在直流电动机控制,可变直流电源、高压直流输电、电化学加工处理方面得到广泛的应用。本文基于电子电路仿真软件Multisim7.0,建立了单相桥式全控电路、三相桥式不控整流电路以及Boost电路的动态仿真模型,给出了仿真实例,验证了模型的正确性,并证明了该模型具有快捷、灵活、方便、直观等一系列优点,从而为电力电子电路的教学及设计提供了一个有效的辅助工具。 相似文献
8.
电力电子电路仿真软件综述 总被引:1,自引:0,他引:1
随着计算机软件技术的不断发展,电力电子电路仿真软件也不断的更新换代,本文着重介绍OrCAD PSpice、saber、PLECS、CASPOC、Matlab五种常见的电力电子仿真软件的主要功能和缺点,便于使用者选择合适的软件进行电力电子电路仿真分析和设计。 相似文献
9.
本文以非线性电子电路的支路特性为基础,从电子元件的工作点出发,导出求解非线性电子电路方程的快速收敛算法,较好的解决非线性电子电路方程在求解过程中出现的振荡现象和假收敛问题. 相似文献
10.
为了解决电力电子电路出现的电场串扰问题,分析电力电子电路电场串扰的形成原因,在此基础上探究有效且可行的电场串扰屏蔽思路,结合实际案例,提出电力电子电路电场串扰屏蔽措施,以期为今后电力电子电路的稳定运行提供技术保障。 相似文献
11.
This paper describes a nonlinear transmission line modeling technique that can be employed to model power electronic circuits. The nonlinearities that can be dealt with also include the switching action of the power devices as well as the nonlinear behavior of saturable inductors and multilayer capacitors. With this new nonlinear technique, the transmission line modeling technique can now be used as a generalized discrete-time modeling tool for power electronic circuits. The nonlinear technique is demonstrated in two examples and the simulations are found to be satisfactory 相似文献
12.
13.
Bivariate generalized power series analysis is introduced for the analysis and behavioral modeling of nonlinear analog circuits and systems. It can be used to model analog subsystems and is compatible with circuit simulation, thereby allowing full circuits and behaviorally modeled analog subcircuits to be simulated together in an analog circuit/system simulator. The entire analysis is performed in the frequency domain, and arbitrary nonlinear circuits and any number of noncommensurable input frequencies can be accommodated. A diode ring demodulator is analyzed as an example 相似文献
14.
Complex behavior in switching power converters 总被引:21,自引:0,他引:21
Tse C.K. Di Bernardo M. 《Proceedings of the IEEE. Institute of Electrical and Electronics Engineers》2002,90(5):768-781
Power electronics circuits are rich in nonlinear dynamics. Their operation is characterized by cyclic switching of circuit topologies, which gives rise to a variety of nonlinear behavior. This paper provides an overview of the chaotic dynamics and bifurcation scenarios observed in power converter circuits, emphasizing the salient features of the circuit operation and the modeling strategies. In particular this paper surveys the key publications in this field, reviews the main modeling approaches, and discusses the salient bifurcation behaviors of power converters with particular emphasis on the disruption of standard bifurcation patterns by border collisions 相似文献
15.
基于电流分解的单相无功功率定义及测量方法 总被引:1,自引:0,他引:1
朱桂萍 《电气电子教学学报》2010,32(2):23-28
周期非正弦激励电路中的无功功率定义是一个颇具争议的问题。本文提出了一种基于Fryze时域电流分解的单相无功功率定义方法,给出了这种定义下正弦激励下各种线性元件和非线性元件的无功功率表达式,以及非直线激励下线性电阻元件的无功功率表达式。推导结果表明,这种无功定义能更加直接地准确定位系统中的谐波源,更加有利于谐波治理和无功的实时补偿,文章最后给出了基于Matlab的电流分解算法,为无功实时补偿和无功电能计量奠定了基础。 相似文献
16.
针对L频段低谐波失真功率放大器的设计,进行线性与非线性电路分析仿真和电路的优化设计。从理论上分析了甲乙类功率放大器的谐波失真特性,通过采用具有抑制谐波特性的输出匹配电路以降低功放产生的谐波失真。测试得到电路的关键技术指标为:工作频率范围1 390~1 510MHz,增益35 dB,1 dB压缩点33 dBm,并获得了满意的谐波抑制指标,在1 480 MHz、输出功率33dBm时,二、三次谐波分别为-70 dBc和-63 dBc。结果表明在功放设计中,优化设计输出匹配电路可以有效抑制功放的谐波失真。 相似文献
17.
Nonlinear modeling and bifurcations in the boost converter 总被引:17,自引:0,他引:17
The occurrence of nonlinear phenomena like subharmonics and chaos in power electronic circuits has been reported recently. In this paper, the authors investigate these phenomena in the current-mode-controlled boost power converter. A nonlinear model in the form of a mapping from one point of observation to the next has been derived. The map has a closed form even when the parasitic elements are included. The bifurcation behavior of the boost power converter has been investigated with the help of this discrete model 相似文献
18.
By combining the exact nonlinear capabilities of translinear circuits with the high-gain, low-input-offset, load-driving and level-shifting properties of op-amps, analogue computing structures of great power and precision can be realised. This point is illustrated by circuits which compute the root sum of squares and root difference of squares. 相似文献
19.
《Mechatronics, IEEE/ASME Transactions on》2009,14(4):423-433
20.
固态倍频器是太赫兹源应用中的关键器件,如何利用非线性器件提高太赫兹倍频器件的效率是设计太赫兹固态电路的关键。本文介绍了利用肖特基二极管非线性特性设计固态太赫兹二倍频器的2种方法,即采用直接阻抗匹配和传输模式匹配设计了2种不同拓扑结构的170 GHz二倍频器,针对设计的结构模型,分别进行三维有限元电磁仿真和非线性谐波平衡仿真。仿真结果表明,在17 dBm输入功率的驱动下,倍频器在160 GHz~180 GHz输出频率范围内,倍频效率在15%左右,输出功率大于7 mW。最后对2种方法设计的倍频器结构进行了简单对比和分析,为今后太赫兹倍频研究和设计提供仿真方法。 相似文献