首页 | 官方网站   微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
对PMOSFET's几种典型器件参数随应力时间的退化规律进行了深入研究,给出了一个新的器件退化监控量,并建立了不同器件参数退化的统一模型.模拟结果和测量结果的比较表明,新的退化模型具有较高的准确性和较宽的适用范围.新的退化模型不但可以用于器件参数退化量的模拟,也可以用于器件寿命评估.  相似文献   

2.
张进城  郝跃  朱志炜 《半导体学报》2001,22(12):1586-1591
对 PMOSFET's几种典型器件参数随应力时间的退化规律进行了深入研究 ,给出了一个新的器件退化监控量 ,并建立了不同器件参数退化的统一模型 .模拟结果和测量结果的比较表明 ,新的退化模型具有较高的准确性和较宽的适用范围 .新的退化模型不但可以用于器件参数退化量的模拟 ,也可以用于器件寿命评估  相似文献   

3.
颜志英 《微电子学》2003,33(2):90-93
当器件尺寸进入深亚微米后,SOI MOS集成电路中的N沟和P沟器件的热载流子效应引起的器件退化已不能忽视。通过分别测量这两种器件的跨导、阈值电压等参数的退化与应力条件的关系,分析了这两种器件的退化规律,对这两种器件的热载流子退化机制提出了合理的解释。并模拟了在最坏应力条件下,最大线性区跨导Gmmax退化与漏偏压应力Vd的关系,说明不同沟长的器件在它们的最大漏偏压以下时,能使Gmmax的退化小于10%。  相似文献   

4.
薛舫时 《微纳电子技术》2007,44(11):976-984,1007
在综述大功率AlGaN/GaN HFET性能退化实验结果的基础上,研究了器件退化与电流崩塌间的关联。分析了现有各类器件失效模型的优点和不足之处。通过沟道中强电场和热电子分布的研究,完善了热电子触发产生缺陷陷阱的器件退化模型。使用这一模型解释了实验中观察到的各类性能退化现象,指出优化设计异质结构可以有效减弱GaN HFET的性能退化。最后提出减弱器件性能退化的方法和途径。  相似文献   

5.
深亚微米pMOS器件HCI退化建模与仿真方法   总被引:1,自引:1,他引:0  
李康  郝跃  刘红侠  方建平  薛鸿民 《半导体学报》2005,26(11):2169-2174
研究了深亚微米pMOS器件HCI(hot carrier injeotion)退化模型.采用流函数分析方法提出一种时变栅电流物理描述,基于这一栅电流模型改进了pMOS器件的HCI退化模型,并在该模型基础上提出一种HCI退化可靠性仿真方法,用于对静态应力条件下器件的HCI退化程度进行预测.最后给出了仿真结果对比.该方法已被用于XDRT可靠性工具中进行器件HCI退化分析.  相似文献   

6.
研究了深亚微米pMOS器件HCI(hot carrier injeotion)退化模型.采用流函数分析方法提出一种时变栅电流物理描述,基于这一栅电流模型改进了pMOS器件的HCI退化模型,并在该模型基础上提出一种HCI退化可靠性仿真方法,用于对静态应力条件下器件的HCI退化程度进行预测.最后给出了仿真结果对比.该方法已被用于XDRT可靠性工具中进行器件HCI退化分析.  相似文献   

7.
研究了热载流子应力下栅厚为2.1nm,栅长为0.135μm的pMOSFET中HALO掺杂剂量与器件的退化机制和参数退化的关系.实验发现,器件的退化机制对HALO掺杂剂量的改变不敏感,但是器件的线性漏电流、饱和漏电流、最大跨导的退化随着HALO掺杂剂量的增加而增加.实验同时发现,器件参数的退化不仅与载流子迁移率的退化、漏串联电阻增大有关,而且与阈值电压的退化和应力前阈值电压有关.  相似文献   

8.
本文研究了不同偏置条件对AlGaN/GaN HEMT电学性能的影响。电场被认为是导致AlGaN/GaN HEMT器件电学性能退化的外因,陷阱则是内因。AlGaN/GaN HEMT器件的退化有两部分组成:可恢复退化与不可恢复退化。AlGaN/GaN HEMT器件中原本存在的陷阱与新产生的陷阱导致可恢复退化。  相似文献   

9.
归纳了GaAs PHEMT器件的几种常见失效模式,并从6个方面分析了PHEMT器件的失效机理:热电子应力退化、氢效应、2DEG结构退化、欧姆接触退化、肖特基接触退化和电迁移.  相似文献   

10.
赵要  胡靖  许铭真  谭长华 《半导体学报》2004,25(9):1097-1103
研究了热载流子应力下栅厚为2 .1nm ,栅长为0 .135μm的p MOSFET中HAL O掺杂剂量与器件的退化机制和参数退化的关系.实验发现,器件的退化机制对HAL O掺杂剂量的改变不敏感,但是器件的线性漏电流、饱和漏电流、最大跨导的退化随着HAL O掺杂剂量的增加而增加.实验同时发现,器件参数的退化不仅与载流子迁移率的退化、漏串联电阻增大有关,而且与阈值电压的退化和应力前阈值电压有关.  相似文献   

11.
DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.  相似文献   

12.
This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel's.  相似文献   

13.
The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.  相似文献   

14.
Today, micro-system technology and the development of new MEMS (Micro-Electro-Mechanical Systems) are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.  相似文献   

15.
The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.  相似文献   

16.
From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.  相似文献   

17.
Waveguide multilayer optical card (WMOC) is a novel storage device of three-dimensional optical information. An advanced readout system fitting for the WMOC is introduced in this paper. The hardware mainly consists of the light source for reading, WMOC, motorized stages addressing unit, microscope imaging unit, CCD detecting unit and PC controlling & processing unit. The movement of the precision motorized stage is controlled by the computer through Visual Basic (VB) language in software. A control panel is also designed to get the layer address and the page address through which the position of the motorized stages can be changed. The WMOC readout system is easy to manage and the readout result is directly displayed on computer monitor.  相似文献   

18.
It is well known that adding more antennas at the transmitter or at the receiver may offer larger channel capacity in the multiple-input multiple-output(MIMO) communication systems. In this letter, a simple proof is presented for the fact that the channel capacity increases with an increase in the number of receiving antennas. The proof is based on the famous capacity formula of Foschini and Gans with matrix theory.  相似文献   

19.
To meet the need of automatic image features extraction with high precision in visual inspection, a complete approach to automatic identification and sub-pixel center location for similar-ellipse feature is proposed. In the method, the feature area is identified automatically based on the edge attribute, and the sub-pixel center location is accomplished with the leastsquare algorithm. It shows that the method is valid, practical, and has high precision by experiment. Meanwhile this method can meet the need of instrumentation of visual inspection because of easy realization and without man-machine interaction.  相似文献   

20.
We have fabricated the white organic light-emitting devices (WOLEDs) based on 4,4' -bis(2,2 -diphenyl vinyl)-1,1' - biphenyl (DPVBi) and phosphorescence sensitized 5,6,11,12,-tetraphenylnaphthacene (rubrene). The device structure is ITO/2T-NATA (20 nm)/NPBX (20 nm)/CBP: x%Ir(ppy)3:0.5% rubrene (8 nm)/NPBX (5 nm)/DPVBi (30 nm)/Alq(30 nm)/LiF(0.5 nm)/A1. In the devices, DPVBi acts as a blue light-emitting layer, the rubrene is sensitized by a phosphorescent material, fac tris (2-phenylpyridine) iridium [Ir(ppy)3], acts as a yellow light-emitting layer, and N,N' -bis- (1-naphthyl)- N,N' -diphenyl -1, 1' -biphenyl-4,4' -diamine (NPBX) acts as a hole transporting and exciton blocker layer, respectively. When the concentration of Ir (PPY)3 is 6wt%, the maximum luminance is 24960 cd/m^2 at an applied voltage of 15 V, and the maximum luminous efficiency is 5.17 cd/A at an applied voltage of 8 V.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号