共查询到20条相似文献,搜索用时 62 毫秒
1.
本文结合小波包变换和离散余弦变换,提出了一种基于听觉模型的混合域自适应音频盲水印算法,在不引入听觉失真的前提下,实现了自适应的水印嵌入。算法首先对音频信号进行小波包分解,使得分解后的子带更接近人耳临界频带。其次对每个子带的小波包系数进行离散余弦变换,计算出子带掩蔽阈值。根据子带掩蔽阈值自适应的选取噪声敏感度小的音频段作为水印嵌入段,选取功率值低于掩蔽阈值的频域系数作为水印嵌入位置,同时采用噪声掩蔽比调整水印嵌入强度。二值水印图像通过量化索引调制的方法嵌入到音频信号的中低频系数中,提取水印时不需要原始音频载体。本算法在水印容量、不可感知性和鲁棒性之间达到了很好的平衡,水印容量在576.7bps到689.5bps之间,算法对添加噪声、重新量化、重新采样、低通滤波和MP3压缩均具有很好的鲁棒性。 相似文献
2.
3.
为保证DCT域水印的鲁棒性,研究水印信号的嵌入位置非常必要.对音频载体,尽管有许多文献提出将水印嵌在中频系数或对听觉效果重要的系数上,但始终缺乏一个统一的方法.本文在DCT噪声信号模型研究的基础上,提出了一种新的音频水印嵌入位置选择策略和一个应用该策略的自适应音频水印算法.通过定义DCT系数的噪声敏感度,建立了水印嵌入位置和嵌入水印后的音频信号的听觉感知性之间的关系,根据音频水印的不可听性的要求选择最优的嵌入位置,然后调节水印强度来满足鲁棒性的要求,从而最大程度地保持音频水印的不可听性和鲁棒性,为解决音频水印嵌入过程中不可听性和鲁棒性之间的矛盾提供了一种策略.应用该策略,本文提出了一个自适应音频水印算法.实验证实了算法的鲁棒性. 相似文献
4.
一种心理声学模型的自同步音频数字水印 总被引:2,自引:2,他引:0
提出了一种基于心理声学模型的自同步音频水印算法。在掩藏水印信息的同时,嵌入一个同步信号.使水印具有自同步能力。根据人耳听觉系统的心理声学模型,将水印信号和同步信号嵌入到中低频子波系数中.嵌入强度由掩蔽闻值自适应控制。仿真实验证明了算法的不可觉察性和鲁棒性。 相似文献
5.
6.
基于听觉掩蔽效应和小波变换的数字音频水印 总被引:7,自引:0,他引:7
提出了一种基于听觉掩蔽效应和小波变换相结合的音频数字水印算法。根据人耳听觉系统的掩蔽效应,计算载体音频信号的掩蔽阈值,利用小波变换将掩蔽门限映射到小波系数中,然后将水印信号嵌入到中低频子波系数中.嵌入强度由掩蔽阈值自适应控制。实验结果表明:该算法隐藏水印具有很强的掩蔽性;叠加了水印的音频信号对数据压缩、加噪、重采样、低通滤波等常用音频信号处理技术具有很好的鲁棒性。 相似文献
7.
一种新的扩频音频水印算法 总被引:5,自引:2,他引:3
音频水印提供了一种数字保密的方法,用来保护作者和版权所有者的权利。在本文中。基于扩频技术提出了一种新的音频水印算法.即应用音频的瞬时平均频率(IMF)来嵌入数字水印,其目标是最大限度的满足水印的不可觉察性和健壮性。本文算法对原始的音频信号进行短时傅立叶变换,从而估计出信号的加权瞬时平均频率(IMF)。基于心理声学模型的掩蔽特性。可以得出水印被要求的相应的声压级。根据这些结果调制产生一个依赖于信号的不可觉察的水印。本算法允许在5秒钟的音频信号中嵌入25位信息。实验结果表明本文算法对于常见的信号处理攻击包括滤波、MP3压缩和添加噪声具有很好的健壮性。 相似文献
8.
基于提升小波的多重数字音频水印 总被引:9,自引:0,他引:9
该文提出了一种在提升小波域同时嵌入鲁棒水印和易损水印的音频水印算法。原始音频信号经过提升小波变换后,将低频小波系数进行均值量化嵌入鲁棒水印,具有较好的鲁棒性和不可感知性;对高频小波系数直接进行单个系数量化嵌入易损水印,当音频内容发生篡改时,这些水印信息会发生相应的改变,从而可以鉴定原始音频的完整性。水印的提取不需要原始音频信号。实验结果表明,鲁棒水印对MP3压缩、低通滤波、加噪、重量化、重采样等信号处理攻击具有很强的鲁棒性:而易损水印对上述攻击则具有很强的敏感性。 相似文献
9.
本文提出了一种基于离散小波变换的同步数字音频盲水印算法。嵌入的水印为视觉上可辨的二值图像。算法中引入了嵌入同步信号的思想,利用同步信号定位水印的嵌入位置。为了提高信号的鲁棒性,把同步信号与水印隐藏在DWT域的低频系数中。同时,检测水印时不需要原始音频。仿真实验表明,所提出的方法具有较强的鲁棒性和不可感知性,并能有效抵御各种常见攻击。 相似文献
10.
文中提出了一种基于离散小波变换的同步数字音频盲水印算法.嵌入的水印为视觉上可辨的二值图像.算法中引入了嵌入同步信号的思想,利用同步信号定位水印的嵌入位置,为了提高信号的鲁棒性,把同步信号与水印隐藏在DWT域的低频系数中;同时,检测水印时不需要原始音频.仿真实验表明:所提出的方法具有较强的鲁棒性和不可感知性,并能有效抵御各种常见攻击. 相似文献
11.
The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation. 相似文献
12.
Today, micro-system technology and the development of new MEMS (Micro-Electro-Mechanical Systems) are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible. 相似文献
13.
The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high. 相似文献
14.
Thomas M.Trexler 《半导体技术》2004,29(5)
From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test. 相似文献
15.
GU Min-fen LIANG Zhong-cheng WANG Ren-zhou DONG Xiang-mei ZHANG Pei-ming CHEN Jia-bi 《光电子快报》2008,4(2):150-152
Waveguide multilayer optical card (WMOC) is a novel storage device of three-dimensional optical information. An advanced readout system fitting for the WMOC is introduced in this paper. The hardware mainly consists of the light source for reading, WMOC, motorized stages addressing unit, microscope imaging unit, CCD detecting unit and PC controlling & processing unit. The movement of the precision motorized stage is controlled by the computer through Visual Basic (VB) language in software. A control panel is also designed to get the layer address and the page address through which the position of the motorized stages can be changed. The WMOC readout system is easy to manage and the readout result is directly displayed on computer monitor. 相似文献
16.
Michael Reilly 《半导体技术》2004,29(12)
DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system. 相似文献
17.
In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal (200) (2d = 0.4027 nm) is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line(w), the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line(x), the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines(y), the 1 s2p ^3S~1-1 s^2 ^1S0 forbidden line(z) in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line(q) in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution(λ/△ 2) is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy. 相似文献
18.
High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET > PDMAT > TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center. 相似文献
19.
The collinearly phase-matching condition of terahertz-wave generation via difference frequency mixed in GaAs and InP is theoretically studied. In collinear phase-matching, the optimum phase-matching wave hands of these two crystals are calculated. The optimum phase-matching wave bands in GaAs and lnP are 0.95-1.38μm and 0.7-0.96μm respectively. The influence of the wavelength choice of the pump wave on the coherent length in THz-wave tuning is also discussed. The influence of the temperature alteration on the phase-matching and the temperature tuning properties in GaAs crystal are calculated and analyzed. It can serve for the following experiments as a theoretical evidence and a reference as well. 相似文献
20.
Due to variable symbol length of digital pulse interval modulation(DPIM), it is difficult to analyze the error performances of Turbo coded DPIM. To solve this problem, a fixed-length digital pulse interval modulation(FDPIM) method is provided. The FDPIM modulation structure is introduced. The packet error rates of uncoded FDPIM are analyzed and compared with that of DPIM. Bit error rates of Turbo coded FDPIM are simulated based on three kinds of analytical models under weak turbulence channel. The results show that packet error rate of uncoded FDPIM is inferior to that of uncoded DPIM. However, FDPIM is easy to be implemented and easy to be combined, with Turbo code for soft-decision because of its fixed length. Besides, the introduction of Turbo code in this modulation can decrease the average power about 10 dBm, which means that it can improve the error performance of the system effectively. 相似文献